Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pilot error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

SU-C-BRD-05: Non-Invasive in Vivo Biodosimetry in Radiotherapy Patients Using Electron Paramagnetic Resonance (EPR) Spectroscopy

Purpose: Medical intervention following a major, unplanned radiation event can elevate the human whole body exposure LD50 from 3 to 7 Gy. On a large scale, intervention cannot be achieved effectively without accurate and efficient triage. Current methods of retrospective biodosimetry are restricted in capability and applicability; published human data is limited. We aim to further develop, validate, and optimize an automated field-deployable in vivo electron paramagnetic resonance (EPR) instrument that can fill this need. Methods: Ionizing radiation creates highly-stable, carbonate-based free radicals within tooth enamel. Using a process similar to nuclear magnetic resonance, EPR directly measures the presence of radiation-induced free radicals. We performed baseline EPR measurements on one of the upper central incisors of total body irradiation (TBI) and head and neck (H&N) radiotherapy patients before their first treatment. Additional measurements were performed between subsequent fractions to examine the EPR response with increasing radiation dose. Independent dosimetry measurements were performed with optically-stimulated luminescent dosimeters (OSLDs) and diodes to more accurately establish the relationship between EPR signal and delivered radiation dose. Results: 36 EPR measurements were performed over the course of four months on two TBI and four H & N radiotherapy patients. We observe a linear increase in EPR signal with increasing dose across the entirety of the tested range. A linear least squares-weighted fit of delivered dose versus measured signal amplitude yields an adjusted R-square of 0.966. The standard error of inverse prediction (SEIP) is 1.77 Gy. For doses up to 7 Gy, the range most relevant to triage, we calculate an SEIP of 1.29 Gy. Conclusion: EPR spectroscopy provides a promising method of retrospective, non-invasive, in vivo biodosimetry. Our preliminary data show an excellent correlation between predicted signal amplitude and delivered dose. With further development, a robust means of predicting delivered radiation dose from EPR measurements is expected. This project was funded by the Biomedical Advanced Research and Development Authority (BARDA) within the U.S. Department of Health and Human Services subcontracted through the Geisel School of Medicine at Dartmouth and by the Dartmouth Physically-Based Biodosimetry Center for Medical Countermeasures Against Radiation (Dart-Dose CMCR) Pilot Program.

60 APPLIED LIFE SCIENCES↗

Performance Evaluation of Intelligent Solar Control Software Through Hardware-in-the-Loop (CRADA Final Report)

Recent research has highlighted the potential for solar to act as a zero-marginal-cost and zero-emission flexibility resource on the bulk power system when operated with advanced control systems. To increase the performance of these systems, leading technologies, including machine learning (ML) and hierarchical inverter set point allocation, have been developed by Latimer Controls, Inc. to estimate the headroom of large PV plants for grid operation and control; however, these technologies lack comprehensive validation under real-world application scenarios. Latimer Controls, Inc. received two voucher awards for research at a national laboratory from the Department of Energy American Made Solar Prize Round 6. The National Renewable Energy Laboratory (NREL) was selected to collaborate with Latimer staff to conduct a performance evaluation of Latimer PV control software. The NREL team will develop a hardware-in-the-loop (HIL) testbed to perform testing and validation of the Latimer PV control technology in a de-risked yet realistic testbed environment. Latimer and NREL worked together to analyze the test data, draw conclusions from the results, and disseminate the resulting scientific findings. In this CRADA work, we propose to test and validate the real-world application of the Latimer Control solution in an HIL environment. We evaluate the performance of different flexible solar technologies in responding to automatic generation control signals in a closed-loop fashion. In particular, a data-driven potential high limit (PHL) estimation is developed for large solar plants to accurately estimate their headroom so that they have fast and short-time regulation and control capability to participate in grid services and respond to grid signals in real time (e.g., AGC). This PHL estimation algorithm is embedded in a hardware power plant controller (PPC) and tested with an IEEE-39 bus system model developed in RTDS. To account for the varying cloud conditions and diverse inverter dispatches, we developed a 135-MW PV plant with detailed modeling of 27 individual PV modules and inverters using RTDS. The real-world communications used in such big plants, such as ModBus TCP/IP for inverter level and DNP3 for plant level, were developed to emulate the real-world applications in big PV plants. The ML-based PHL estimation method is tested under nine separate weather scenarios against the ‘reference-control’ solution, hereafter referred to as the baseline solution. The baseline method reserves a subset of inverters (reference group) to operate at their PHL at all times and dispatches only the remaining inverters (control group) at curtailed levels to fulfill the flexibility need. Despite being successfully piloted by NREL in California in 2017 and Chile in 2020, there exist two gaps in the state of the art to fully unlock the flexibility of PV plants: a. There is a trade-off between the PHL estimation accuracy and the flexibility range. b. There lacks granularity in the PHL estimation to capture the variation across inverters. The Latimer solution seeks to address these gaps by applying machine learning methods to improve PHL estimation accuracy while accounting for variability at every inverter. Performance metrics were taken from the 2023 Georgia Power CARES utility-scale RFP. The results demonstrate that the ML-based approach outperforms the traditional baseline method in PHL estimation accuracy for 7 of 9 scenarios. The average PHL error across the nine scenarios was 7.40% for the ML-based method, 2.06% less than the 9.46% PHL error average across scenarios that was exhibited by the baseline method. Additionally, the PHL error was below 5% for at least 95% of the testing interval for 3 of 9 tested intervals with the ML approach, whereas it did not achieve this metric for any of the baseline tests. Overall, simulation results indicate the superior performance of an ML-based approach compared to the conventional baseline reference-control approach, showcasing its potential to support grid stability and operational efficiency. This laboratory HIL testing using real PPC, representative power system simulation models in real-time with detailed PV plant and inverter models, and real-world communication protocols gives us confidence that this machine learning based PHL estimation algorithm works well in the hardware PPC and therefore de-risks future field commissioning. The end goal of this project is to advance grid technology to address the grid operation challenges brought by solar plant’s variability and uncertainties in power generation.

14 SOLAR ENERGY↗

Adaptive Augmenting Control Flight Characterization Experiment on an F/A-18

This paper summarizes the Adaptive Augmenting Control (AAC) flight characterization experiments performed using an F/A-18 (TN 853). AAC was designed and developed specifically for launch vehicles, and is currently part of the baseline autopilot design for NASA's Space Launch System (SLS). The scope covered here includes a brief overview of the algorithm (covered in more detail elsewhere), motivation and benefits of flight testing, top-level SLS flight test objectives, applicability of the F/A-18 as a platform for testing a launch vehicle control design, test cases designed to fully vet the AAC algorithm, flight test results, and conclusions regarding the functionality of AAC. The AAC algorithm developed at Marshall Space Flight Center is a forward loop gain multiplicative adaptive algorithm that modifies the total attitude control system gain in response to sensed model errors or undesirable parasitic mode resonances. The AAC algorithm provides the capability to improve or decrease performance by balancing attitude tracking with the mitigation of parasitic dynamics, such as control-structure interaction or servo-actuator limit cycles. In the case of the latter, if unmodeled or mismodeled parasitic dynamics are present that would otherwise result in a closed-loop instability or near instability, the adaptive controller decreases the total loop gain to reduce the interaction between these dynamics and the controller. This is in contrast to traditional adaptive control logic, which focuses on improving performance by increasing gain. The computationally simple AAC attitude control algorithm has stability properties that are reconcilable in the context of classical frequency-domain criteria (i.e., gain and phase margin). The algorithm assumes that the baseline attitude control design is well-tuned for a nominal trajectory and is designed to adapt only when necessary. Furthermore, the adaptation is attracted to the nominal design and adapts only on an as-needed basis (see Figure 1). The MSFC algorithm design was formulated during the Constellation Program and reached a high maturity level during SLS through simulation-based development and internal and external analytical review. The AAC algorithm design has three summary-level objectives: (1) "Do no harm;" return to baseline control design when not needed, (2) Increase performance; respond to error in ability of vehicle to track command, and (3) Regain stability; respond to undesirable control-structure interaction or other parasitic dynamics. AAC has been successfully implemented as part of the Space Launch System baseline design, including extensive testing in high-fidelity 6-DOF simulations the details of which are described in [1]. The Dryden Flight Research Center's F/A-18 Full-Scale Advanced Systems Testbed (FAST) platform is used to conduct an algorithm flight characterization experiment intended to fully vet the aforementioned design objectives. FAST was specifically designed with this type of test program in mind. The onboard flight control system has full-authority experiment control of ten aerodynamic effectors and two throttles. It has production and research sensor inputs and pilot engage/disengage and real-time configuration of up to eight different experiments on a single flight. It has failure detection and automatic reversion to fail-safe mode. The F/A-18 aircraft has an experiment envelope cleared for full-authority control and maneuvering and exhibits characteristics for robust recovery from unusual attitudes and configurations aided by the presence of a qualified test pilot. The F/A-18 aircraft has relatively high mass and inertia with exceptional performance; the F/A-18 also has a large thrust-to-weight ratio, owing to its military heritage. This enables the simulation of a portion of the ascent trajectory with a high degree of dynamic similarity to a launch vehicle, and the research flight control system can simulate unstable longitudinal dynamics. Parasitic dynamics such as slosh and bending modes, as well as atmospheric disturbances, are being produced by the airframe via modification of bending filters and the use of secondary control surfaces, including leading and trailing edge flaps, symmetric ailerons, and symmetric rudders. The platform also has the ability to inject signals in flight to simulate structural mode resonances or other challenging dynamics. This platform also offers more test maneuvers and longer maneuver times than a single rocket or missile test, which provides ample opportunity to fully and repeatedly exercise all aspects of the algorithm. Prior to testing on an F/A-18, AAC was the only component of the SLS autopilot design that had not been flight tested. The testing described in this paper raises the Technology Readiness Level (TRL) early in the SLS Program and is able to demonstrate its capabilities and robustness in a flight environment.

VanZwieten, Tannen S.↗

Flexible Wing Base Micro Aerial Vehicles: Vision-Guided Flight Stability and Autonomy for Micro Air Vehicles

Substantial progress has been made recently towards design building and test-flying remotely piloted Micro Air Vehicle's (MAVs). We seek to complement this progress in overcoming the aerodynamic obstacles to.flight at very small scales with a vision stability and autonomy system. The developed system based on a robust horizon detection algorithm which we discuss in greater detail in a companion paper. In this paper, we first motivate the use of computer vision for MAV autonomy arguing that given current sensor technology, vision may he the only practical approach to the problem. We then briefly review our statistical vision-based horizon detection algorithm, which has been demonstrated at 30Hz with over 99.9% correct horizon identification. Next we develop robust schemes for the detection of extreme MAV attitudes, where no horizon is visible, and for the detection of horizon estimation errors, due to external factors such as video transmission noise. Finally, we discuss our feed-back controller for self-stabilized flight, and report results on vision autonomous flights of duration exceeding ten minutes.

Ettinger, Scott M.↗

Exploiting Satellite Remote-Sensing Data in Fine Particulate Matter Characterization for Serving the Environmental Public Health Tracking Network (EPHTN): The HELIX-Atlanta Experience and NPOESS Implications

As part of the U.S. National Environmental Public Health Tracking Network (EPHTN), the National Center for Environmental Health (NCEH) at the U.S. Centers for Disease Control and Prevention (CDC) led a project in collaboration with the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center (MSFC) called Health and Environment Linked for Information Exchange (HELIX-Atlanta). Under HELIX-Atlanta, pilot projects were conducted to develop methods to better characterize exposure; link health and environmental datasets; and analyze spatial/temporal relationships. This paper describes and demonstrates different techniques for surfacing daily environmental hazards data of particulate matter with aerodynamic diameter less than or equal to 2.5 micrometers (PM(sub 2.5) for the purpose of integrating respiratory health and environmental data for the CDC's pilot study of HELIX-Atlanta. It describes a methodology for estimating ground-level continuous PM(sub 2.5) concentrations using spatial surfacing techniques and leveraging NASA Moderate Resolution Imaging Spectrometer (MODIS) data to complement the U.S. Environmental Protection Agency (EPA) ground observation data. The study used measurements of ambient PM(sub 2.5) from the EPA database for the year 2003 as well as PM(sub 2.5) estimates derived from NASA's MODIS data. Hazard data have been processed to derive the surrogate exposure PM(sub 2.5) estimates. The paper has shown that merging MODIS remote sensing data with surface observations of PM(sub 2.5), may provide a more complete daily representation of PM(sub 2.5), than either data set alone would allow, and can reduce the errors in the PM(sub 2.5) estimated surfaces. Future work in this area should focus on combining MODIS column measurements with profile information provided by satellites like the National Polar-orbiting Operational Environmental Satellite System (NPOESS). The Visible Infrared Imager/Radiometer Suite (VIIRS) and the Aerosol Polarimeter Sensor (APS) NPOESS sensors will provide first-order information on aerosol particle size and are anticipated to provide information on aerosol products at higher resolution and accuracy than MODIS. Use of the NPOESS remote sensing data should result in more robust remotely sensed data that can be coupled with the methods discussed in this paper to generate surface concentrations of PM(2.5) for linkage with health data in Environmental Public Health Tracking.

Al-Hamdan, Mohammad Z.↗

Advanced Outage and Control Center: Strategies for Nuclear Plant Outage Work Status Capabilities

The research effort is a part of the Light Water Reactor Sustainability (LWRS) Program. LWRS is a research and development program sponsored by the Department of Energy, performed in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The Outage Control Center (OCC) Pilot Project was directed at carrying out the applied research for development and pilot of technology designed to enhance safe outage and maintenance operations, improve human performance and reliability, increase overall operational efficiency, and improve plant status control. Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Unfortunately, many of the underlying technologies supporting outage control are the same as those used in the 1980’s. They depend heavily upon large teams of staff, multiple work and coordination locations, and manual administrative actions that require large amounts of paper. Previous work in human reliability analysis suggests that many repetitive tasks, including paper work tasks, may have a failure rate of 1.0E-3 or higher (Gertman, 1996). With between 10,000 and 45,000 subtasks being performed during an outage (Gomes, 1996), the opportunity for human error of some consequence is a realistic concern. Although a number of factors exist that can make these errors recoverable, reducing and effectively coordinating the sheer number of tasks to be performed, particularly those that are error prone, has the potential to enhance outage efficiency and safety. Additionally, outage management requires precise coordination of work groups that do not always share similar objectives. Outage managers are concerned with schedule and cost, union workers are concerned with performing work that is commensurate with their trade, and support functions (safety, quality assurance, and radiological controls, etc.) are concerned with performing the work within the plants controls and procedures. Approaches to outage management should be designed to increase the active participation of work groups and managers in making decisions that closed the gap between competing objectives and the potential for error and process inefficiency.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Launching Payloads Into Orbit at Relatively Low Cost

A report proposes the development of a system for launching payloads into orbit at about one-fifth the cost per unit payload weight of current systems. The PILOT system was a solid-fuel, aerodynamically spun and spin-stabilized, five-stage rocket with onboard controls including little more than an optoelectronic horizon sensor and a timer for triggering the second and fifth stages, respectively. The proposal calls for four improvements over the PILOT system to enable control of orbital parameters: (1) the aerodynamic tipover of the rocket at the top of the atmosphere could be modeled as a nonuniform gyroscopic precession and could be controlled by selection of the initial rocket configuration and launch conditions; (2) the attitude of the rocket at the top of the first-stage trajectory could be measured by use of radar tracking or differential Global Positioning System receivers to determine when to trigger the second stage; (3) the final-stage engines could be configured around the payload to enhance spin stabilization during a half-orbit coast up to apoapsis where the final stage would be triggered; and (4) the final payload stage could be equipped with a "beltline" of small thrusters for correcting small errors in the trajectory as measured by an off-board tracking subsystem.

Wilcox, Brian↗

Approximate solutions of the filtered radiative transfer equation in large eddy simulations of turbulent reactive flows

An analysis of the relevance of turbulence-radiation interaction in the numerical simulation of turbulent reactive flows is presented. A semi-causal stochastic model was used to generate a time-series of turbulent scalar fluctuations along optical paths of Sandia flame D, a widely studied piloted turbulent jet nonpremixed flame. The radiative transfer equation was integrated along these paths for every realization using a grid resolution typical of a direct numerical simulation. The correlated k-distribution method was employed to compute the radiative properties of the medium. The results were used to determine the ensemble average, as well as the extreme values, of quantities that indicate the importance of the turbulence-radiation interaction. Several approximate methods are then proposed to solve the filtered radiative transfer equation in the framework of large eddy simulations. The proposed methods are applicable along with combustion models that either assume the filtered probability density function of a conserved scalar or solve a transport equation for a joint scalar or joint scalar/velocity filtered density function. It is concluded that the errors resulting from neglecting the turbulence-radiation interaction in large eddy simulations are much lower than those found in Reynolds-averaged Navier-Stokes calculations. The optically thin fluctuation approximation may be extended to large eddy simulations yielding predictions in excellent agreement with the reference solution. If the turbulence-radiation interaction is accounted for using this approximation, the average relative error of the filtered total radiation intensity is generally below 0.3% for the studied flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An approach to estimating flame radiation in combustion chambers containing suspended-particles

Thermal radiation often plays a key role in heat transfer between flames and the surrounding environment. Therefore, reliable measurement of flame radiation is indispensable in the study of combustion. While the measurement of radiative flux from flames is straightforward in an open environment, it is challenging to do so in a confined chamber, due to the influence of the walls. Radiation emitted by the walls and the reflection of flame radiation off the walls can interfere with measurements of flame radiation. For wall surfaces that are at high temperature or highly reflective, the error in the flame radiation measurement can be significant. Here in this paper, a theoretical analysis was carried out to study the contribution of wall emission and wall reflection to the incident radiation measured by radiometers. The results reveal that for a typical lab-scale air-fired flame, the contribution of wall emission and wall reflection to the measured incident radiation can be as high as 55% for a refractory-lined wall and 40% for a water-cooled wall. A convenient approach is proposed to distinguish flame radiation from the measured incident radiation. The approach is based on measurements of surface incident radiation and net radiative heat flux through the wall. The approach can be applied to optically thin systems (most lab-scale and some pilot-scale atmospheric pressure combustion systems) and optically dense systems (typically pressurized large-scale combustion systems). CFD simulations were also performed for two coal-fired combustors, one which represents optically thin and the other optically thick systems, to validate the theoretical model and the approach to estimating flame radiation. Good agreement was observed between CFD results and the theoretical model results, and the proposed approach to estimation of flame radiation was found to have reasonable accuracy.

42 ENGINEERING↗

Analyzing Mode Confusion via Model Checking

Mode confusion is one of the most serious problems in aviation safety. Today's complex digital flight decks make it difficult for pilots to maintain awareness of the actual states, or modes, of the flight deck automation. NASA Langley leads an initiative to explore how formal techniques can be used to discover possible sources of mode confusion. As part of this initiative, a flight guidance system was previously specified as a finite Mealy automaton, and the theorem prover PVS was used to reason about it. The objective of the present paper is to investigate whether state-exploration techniques, especially model checking, are better able to achieve this task than theorem proving and also to compare several verification tools for the specific application. The flight guidance system is modeled and analyzed in Murphi, SMV, and Spin. The tools are compared regarding their system description language, their practicality for analyzing mode confusion, and their capabilities for error tracing and for animating diagnostic information. It turns out that their strengths are complementary.

Luettgen, Gerald↗

Methods for Characterizing Fine Particulate Matter Using Satellite Remote-Sensing Data and Ground Observations: Potential Use for Environmental Public Health Surveillance

This study describes and demonstrates different techniques for surfacing daily environmental / hazards data of particulate matter with aerodynamic diameter less than or equal to 2.5 micrometers (PM2.5) for the purpose of integrating respiratory health and environmental data for the Centers for Disease Control and Prevention (CDC s) pilot study of Health and Environment Linked for Information Exchange (HELIX)-Atlanta. It described a methodology for estimating ground-level continuous PM2.5 concentrations using B-Spline and inverse distance weighting (IDW) surfacing techniques and leveraging National Aeronautics and Space Administration (NASA) Moderate Resolution Imaging Spectrometer (MODIS) data to complement The Environmental Protection Agency (EPA) ground observation data. The study used measurements of ambient PM2.5 from the EPA database for the year 2003 as well as PM2.5 estimates derived from NASA s satellite data. Hazard data have been processed to derive the surrogate exposure PM2.5 estimates. The paper has shown that merging MODIS remote sensing data with surface observations of PM2.5 not only provides a more complete daily representation of PM2.5 than either data set alone would allow, but it also reduces the errors in the PM2.5 estimated surfaces. The results of this paper have shown that the daily IDW PM2.5 surfaces had smaller errors, with respect to observations, than those of the B-Spline surfaces in the year studied. However the IDW mean annual composite surface had more numerical artifacts, which could be due to the interpolating nature of the IDW that assumes that the maxima and minima can occur only at the observation points. Finally, the methods discussed in this paper improve temporal and spatial resolutions and establish a foundation for environmental public health linkage and association studies for which determining the concentrations of an environmental hazard such as PM2.5 with good accuracy levels is critical.

Al-Hamdan, Mohammad Z.↗

Helicopter human factors research

Helicopter flight is among the most demanding of all human-machine integrations. The inherent manual control complexities of rotorcraft are made even more challenging by the small margin for error created in certain operations, such as nap-of-the-Earth (NOE) flight, by the proximity of the terrain. Accident data recount numerous examples of unintended conflict between helicopters and terrain and attest to the perceptual and control difficulties associated with low altitude flight tasks. Ames Research Center, in cooperation with the U.S. Army Aeroflightdynamics Directorate, has initiated an ambitious research program aimed at increasing safety margins for both civilian and military rotorcraft operations. The program is broad, fundamental, and focused on the development of scientific understandings and technological countermeasures. Research being conducted in several areas is reviewed: workload assessment, prediction, and measure validation; development of advanced displays and effective pilot/automation interfaces; identification of visual cues necessary for low-level, low-visibility flight and modeling of visual flight-path control; and pilot training.

Nagel, David C.↗

A Survey Protocol to Assess Meaningfulness and Usefulness of Automated Topic Finding in the NASA Aviation Safety Reporting System

Context: The NASA Aviation Safety Reporting System (ASRS) is a voluntary confidential aviation safety reporting system. The ASRS receives reports from pilots, air traffic controllers, flight attendants and other involved in aviation operations. The reports are de-identified and coded by ASRS expert safety analysts and a short descriptive synopsis is written to describe the safety issue. The de-identified reports are then disseminated to the aviation community in a number of ways including entry into an online database, Safety Alert Bulletins and For Your Information Notices, and the CALLBACK newsletter. Key to these publications are the timely processing (de-identification, coding and summarization) of new reports, which is currently done by ASRS expert safety analysts. Thus, we believe topic modelling could decrease effort in ASRS, if topics are comprehensible. Aim: We propose a methodology to evaluate whether automated topic finding using topic modelling provides meaningful and useful topics. Method: We extend the total error survey methodology to evaluate user topic comprehension of machine learning outputs. To accomplish this we performed a literature review to identify existing methods and define a construct for topic comprehension, utilizing existing ASRS synopsis writing practices to more precisely define meaningfulness and usefulness. Results: A survey protocol was created that addresses the limitations of other survey protocols found in the literature review, which we found lacking in rationale and clear protocol definition. Conclusion: The surveying of user understanding in machine learning outputs presents challenges due to the explosion of parameters to control for and the lack of systematic approach presented in the literature. More reproducible work and survey protocols are needed in the literature and our work is one step towards that direction.

topic finding↗

In-trail following during profile descents with a cockpit display of traffic information

Four line pilots performed simulator flights of 747s on different air routes in conditions of following other aircraft while maintaining a specified temporal flight interval separation. The flights were made in the heading-select mode of the autopilot, and the pitch wheel or altitude select/hold mode with the throttle on manual. A cockpit display of traffic information (CDTI) on a CRT was presented in front of the throttles. A VOR radial with dotted centerlines and sidebands representing 3 km intervals was displayed, along with scales of distance depending on altitude. Traffic information was updated every four seconds. Simulated flights began at cruise and followed a standard profile descent, and traffic following intervals of 60, 80, 120, and 140 seconds were presented in different trials. Results indicated that a CDTI was sufficient instrumentation for trailing other aircraft, with low error rates up to the point of landing preparations.

Chappell, S. L.↗

A high precision instrument to measure angular and binocular deviation introduced by aircraft windscreens by using a shadow casting technique

Objects viewed through transparent sheets with residual non-parallelism and irregularity appear shifted and distorted. This distortion is measured in terms of angular and binocular deviation of an object viewed through the transparent sheet. The angular and binocular deviations introduced are particularly important in the context of aircraft windscreens and canopies as they can interfere with decision making of pilots especially while landing, leading to accidents. In this work, we have developed an instrument to measure both the angular and binocular deviations introduced by transparent sheets. This instrument is especially useful in the qualification of aircraft windscreens and canopies. It measures the deviation in the geometrical shadow cast by a periodic dot pattern trans-illuminated by the distorted light beam from the transparent test specimen compared to the reference pattern. Accurate quantification of the shift in the pattern is obtained by cross-correlating the reference shadow pattern with the specimen shadow pattern and measuring the location of the correlation peak. The developed instrument is handy to use and computes both angular and binocular deviation with an accuracy of less than {+-}0.1 mrad ( Almost-Equal-To 0.036 mrad) and has an excellent repeatability with an error of less than 2%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Light Water Reactor Sustainability Program: Digital Architecture Project Plan

There are many technologies available to the nuclear power industry to improve efficiency in plant work activities. These range from new control room technologies to those for mobile field workers. They can make a positive impact on a wide range of performance objectives – increase in productivity, human error reduction, validation of results, accurate transfer of data, and elimination of repetitive tasks. It is expected that the industry will more and more turn to these technologies to achieve these operational efficiencies to lower costs. At the same time, this will help utilities manage a looming staffing problem as the inevitable retirement wave of the more seasoned workers affects both staffing levels and knowledge retention. A barrier to this wide-scale implementation of new technologies for operational efficiency is the lack of a comprehensive digital architecture that can support the real-time information exchanges needed to achieve the desired operational efficiencies. This project will define an advanced digital architecture that will accommodate the entire range of system, process, and plant worker activity to enable the highest degree of integration, thereby creating maximum efficiency and productivity. This pilot project will consider a range of open standards that are suitable for the various data and communication requirements of a seamless digital environment. It will map these standards into an overall architecture to support the II&C developments of this research program.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Assimilation of a Coordinated Fleet of Uncrewed Aircraft System Observations in Complex Terrain: EnKF System Design and Preliminary Assessment

Abstract Uncrewed aircraft system (UAS) observations collected during the 2018 Lower Atmospheric Process Studies at Elevation—a Remotely Piloted Aircraft Team Experiment (LAPSE-RATE) field campaign were assimilated into a high-resolution configuration of the Weather Research and Forecasting Model using an ensemble Kalman filter. The benefit of UAS observations was assessed for a terrain-driven (drainage and upvalley) flow event that occurred within Colorado’s San Luis Valley (SLV) using independent observations. The analysis and prediction of the strength, depth, and horizontal extent of drainage flow from the Saguache Canyon and the subsequent transition to upvalley and up-canyon flow were improved relative to that obtained both without data assimilation (benchmark) and when only surface observations were assimilated. Assimilation of UAS observations greatly improved the analyses of vertical variations in temperature, relative humidity, and winds at multiple locations in the northern portion of the SLV, with reductions in both bias and the root-mean-square error of roughly 40% for each variable relative to the benchmark run. Despite these noted improvements, some biases remain that were tied to measurement error and/or the impact of the boundary layer parameterization on vertically spreading the observations, both of which require further exploration. The results presented here highlight how observations obtained with a fleet of profiling UAS improve limited-area, high-resolution analyses and short-term forecasts in complex terrain.

54 ENVIRONMENTAL SCIENCES↗

Demonstrating high-precision, multiband transit photometry with MuSCAT: A case for HAT-P-14B

The Multicolor Simultaneous Camera for studying Atmospheres of Transiting exoplanets (MuSCAT) is an optical three-band (g{sub 2}{sup ′}-, r{sub 2}{sup ′}- and z{sub s,2}-band) imager that was recently developed for the 188 cm telescope at Okayama Astrophysical Observatory with the aim of validating and characterizing transiting planets. In a pilot observation with MuSCAT we observed a primary transit of HAT-P-14b, a high-surface gravity (g{sub p} = 38 ms{sup −2}) hot Jupiter around a bright (V = 10) F-type star. From a 2.9 hr observation we achieved the five-minute binned photometric precisions of 0.028%, 0.022%, and 0.024% in the g{sub 2}{sup ′}, r{sub 2}{sup ′}, and z{sub s,2} bands, respectively, which provided the highest-quality photometric data for this planet. Combining these results with those of previous observations, we search for variations of transit timing and duration over five years as well as variations of planet-star radius ratio (R{sub p}/R{sub s}) with wavelengths, but can find no considerable variation in any parameters. On the other hand, using the transit-subtracted light curves we simulate the achievable measurement error of R{sub p}/R{sub s} with MuSCAT for various planetary sizes, assuming three types of host stars: HAT-P-14, the nearby K-dwarf HAT-P-11, and the nearby M-dwarf GJ1214. Comparing our results with the expected atmospheric scale heights, we find that MuSCAT is capable of probing the atmospheres of planets as small as a sub-Jupiter (R{sub p}∼6R{sub ⊕}) around HAT-P-14 in all bands, a Neptune (∼4R{sub ⊕}) around HAT-P-11 in all bands, and a super-Earth (∼2.5R{sub ⊕}) around GJ1214 in r{sub 2}{sup ′} and z{sub s,2} bands. These results promise that MuSCAT will produce fruitful scientific outcomes in the K2 and TESS era.

79 ASTRONOMY AND ASTROPHYSICS↗