Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

ATS-6 - Flight performance of the Advanced Thermal Control Flight Experiment

The Advanced Thermal Control Flight Experiment on ATS-6 was designed to demonstrate the thermal control capability of a thermal diode (one-way) heat pipe, a phase-change material for thermal storage, and a feedback-controlled heat pipe. Flight data for the different operational modes are compared to ground test data, and the performance of the components is evaluated on an individual basis and as an integrated temperature-control system.

Kirkpatrick, J. P.↗
NASA NTRS1975

Non-equilibrium one-dimensional two-phase flow in variable area channels

A one-dimensional nonequilibrium flow analysis has been formulated for a one component two phase flow. The flow is considered homogeneous and essentially isothermal. Phase change is assumed to occur at heterogeneous nucleation sites and the growth of the vapor bubbles is governed by heat conduction from the liquid to the bubble. The analysis adjusted for friction is applied to liquid nitrogen flow in a venturi and comparison is made with the NASA experimental results of Simoneau. Good agreement with the experiments is obtained when one assumes the effective activation energy for nucleus formation to be small but nonzero. The computed pressure distributions deviate from the experimental results in the throat region of the venturi in a manner consistent with centrifugal effects not accounted for in the one-dimensional theory. The results are shown to depend not only on cavitation number but on additional dimensionless parameters governing the nonequilibrium production and subsequent growth of nuclei.

Rohatgi, U. S.↗
NASA NTRS1976

A new method for solving problems of sound radiation from a duct for the case of low Mach number

A method for rapidly solving duct end-plane impedance problems is presented which is based on deriving a form of the Helmholtz integral formula expressing the normal derivative of the acoustic pressure at a boundary point. A set of integral expressions is obtained by satisfying the existing boundary conditions and then solved using a general collocation method. The results obtained for the Levine-Schwinger (1948) problem agree well with the exact values. In the case of a duct flow having a temperature mismatch with the surroundings, the results show an increase in the magnitude of the reflection coefficient for the case of a cold core, and a decrease in its value for the case of a hot core, as compared with the case of exhaust into a uniform medium. A phase change of between pi/2 and pi is nearly always achieved, which indicates the tendency towards maintaining a constant pressure at the exit plane. The method can easily be extended to arbitrary duct shapes as long as they are axisymmetric.

Wahbah, M. M.↗
NASA NTRS1976

Thermophysical properties of foodstuffs

Minimum overall nutritional deterioration of foodstuffs is generally attained by maximizing the rate of heat input and minimizing the duration of heating. Measurement of thermophysical data for foodstuffs is discussed in terms of specific heat, latent energy, enthalpy, thermal conductivity, thermal diffusivity, and density. Since phase change in foodstuffs occurs over a temperature range rather than at a discrete temperature, enthalpy is preferred over sensible and latent energy measurements as it can be used to fix the state of a sample very accurately; also, in the fusion process there is no precise way of separating sensible and latent energies. The first step in determining property data for foodstuffs is to describe the material in conventionally accepted terms. Future work should be concentrated in the area of thermal diffusivity and enthalpy measurements.

Witte, L. C.↗
NASA NTRS1976

Nonintrusive Flowmeter

The results of analytical and experimental work performed in the design, fabrication, and test of a prototype nonintrusive gaging system for use in monitoring the consumption of earth-storable fuels and oxidants in either a one-g or a zero-g environment are explained. The design specifications were those applicable to the reaction control system and to the orbital maneuvering system (OMS) fuel and oxidant on the space shuttle while in orbit. The major requirement was for the measurement of flow pulses with sufficient accuracy to provide a continuous knowledge of the fuel and oxidant remaining in the OMS system to within 1% or better. An ultrasonic frequency chirp technique was used having a high inherent rejection for signals traversing stray paths, and for random noise generated by the flowing liquid. A detailed analysis of the frequency chirp approach for two modes of operation (period and phase changes), including an error analysis are reported.

Greene, M. W.↗
NASA NTRS1976

Development assessment of wash water reclamation

An analytical study assessment of state-of-the-art wash water reclamation technology is presented. It covers all non-phase-change unit operations, unit processes and subsystems currently under development by NASA. Each approach to wash water reclamation is described in detail. Performance data are given together with the projected weights and sizes of key components and subsystems. It is concluded that a simple multifiltration subsystem composed of surface-type cartridge filters, carbon adsorption and ion exchange resins is the most attractive approach for spacecraft wash water reclamation in earth orbital missions of up to 10 years in duration.

Putnam, D. F.↗
NASA NTRS1976

Convection phenomena at reduced gravity of importance for materials processing

The basic aspects of convection processes are delineated. It is shown that even in weak gravitational fields buoyancy can induce fluid motions. Furthermore, at reduced gravity other nongravity forces such as surface or interfacial tensions, g-jitter, therma-volume expansions, density differences due to phase changes, and magnetic and electric fields can induce fluid motions. The various types of flow possible with these various driving forces are described and criteria for determining the extent and nature of the resulting flows and heat transfer are presented. The various physical mechanisms that can occur separately and in combination are indicated and the present state of knowledge of each of the phenomena is outlined.

Ostrach, S.↗
NASA NTRS1977

Proportionality between Doppler noise and integrated signal path electron density validated by differenced S-X range

Observations of Viking differenced S-band/X-band (S-X) range are shown to correlate strongly with Viking Doppler noise. A ratio of proportionality between downlink S-band plasma-induced range error and two-way Doppler noise is calculated. A new parameter (similar to the parameter epsilon which defines the ratio of local electron density fluctuations to mean electron density) is defined as a function of observed data sample interval (Tau) where the time-scale of the observations is 15 Tau. This parameter is interpreted to yield the ratio of net observed phase (or electron density) fluctuations to integrated electron density (in RMS meters/meter). Using this parameter and the thin phase-changing screen approximation, a value for the scale size L is calculated. To be consistent with Doppler noise observations, it is seen necessary for L to be proportional to closest approach distance a, and a strong function of the observed data sample interval, and hence the time-scale of the observations.

Berman, A. L.↗
NASA NTRS1977

Range safety signal propagation through the SRM exhaust plume of the space shuttle

Theoretical predictions of plume interference for the space shuttle range safety system by solid rocket booster exhaust plumes are reported. The signal propagation was calculated using a split operator technique based upon the Fresnel-Kirchoff integral, using fast Fourier transforms to evaluate the convolution and treating the plume as a series of absorbing and phase-changing screens. Talanov's lens transformation was applied to reduce aliasing problems caused by ray divergence.

Boynton, F. P.↗
NASA NTRS1976

A fusible heat sink concept for extravehicular activity /EVA/ thermal control

This paper describes the preliminary design and analysis of a heat sink system, utilizing a phase change slurry material, to be used for astronaut and equipment cooling during manned space missions. During normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a regenerable fusible heat sink. Recharge is accomplished by disconnecting the heat sink from the liquid cooling garment and placing it in an onboard freezer for simultaneous slurry refreeze and power supply recharge.

Roebelen, G. J., Jr.↗
NASA NTRS1976

Mariner 10 observations of Mercury

The paper reviews Mariner 10 observations of Mercury during the three encounters in March 1974 in a darkside passage at an altitude of 703 km, in September 1974 in a brightside passage at southern latitudes at a distance of some 50,000 km, and in March 1975 in another darkside passage at midnorthern latitudes at a closest approach distance of about 327 km. Evidence for the chemical differentiation of Mercury is found in the morphology and distribution of the smooth plains. The concept of chemical differentiation is shown to be consistent with the observation of global compression in that the crustal shortening observed could readily be explained by a phase change in a large metal-rich core. Extreme ultraviolet observations set an upper limit to the atmosphere at around one trillionth bar, with positive identification of a tenous (10 to the minus 15th bar) He atmosphere. An unexpected finding during the first encounter was the existence of a planet-related magnetic field. The third encounter yielded unequivocal evidence that the field is of internal origin, providing an independent line of evidence that Mercury possesses a large metal-rich core.

Dunne, J. A.↗
NASA NTRS1977

Turbulent scattering in an exponential atmosphere - A wave-optical solution

The thin-screen model for scattering of radiation by a turbulent atmosphere is generalized to the case where the mean phase change decreases exponentially as a function of distance across the screen. This is of interest because it models the effect of turbulent scattering in an isothermal average atmosphere. We present both the change in average intensity and average bending angle in terms of the r-m-s scattering angle introduced by the turbulence. We find, for example, that the effect of turbulent scattering on the mean scattering angle (and hence Doppler residuals) is approximately the same as that obtained from more heuristic calculations. The effect depends on wavelength only to the extent that the refractivity is a function of wavelength.

Hubbard, W. B.↗
NASA NTRS1977

Convection phenomena of importance for materials processing in space

The basic aspects of convection processes are delineated. It is shown that even in weak gravitational fields buoyancy can induce fluid motion. Furthermore, at reduced gravity, other nongravity forces such as surface or interfacial tensions, g jitter, thermal volume expansions, density differences due to phase changes, and magnetic and electric fields can induce fluid motions. The types of flows possible with these various driving forces are described, and criteria for determining the extent and nature of the resulting flows and heat transfer are presented. The different physical mechanisms that can occur separately and in combination are indicated, and the present state of knowledge of each of the phenomena is outlined. Specific research problems are described for many of the types of convection that are necessary to obtain greater understanding of their implications for space processing.

Ostrach, S.↗
NASA NTRS1977

Cryogenic temperature control by means of energy storage materials

An investigation was conducted to study the concept of thermal control by means of physical or chemical reaction heats for applications involving the storage of cryogens during long-term space voyages. The investigation included some preliminary experimental tests of energy storage material (ESM) effectiveness. The materials considered can store and liberate large amounts of thermal energy by means of mechanisms such as sensible heat, heat of fusion, and physical or chemical reaction heat. A differential thermal analysis was utilized in the laboratory tests. Attention is given to the evaluation of cryogenic ESM thermal control concepts, the experimental determination of phase change materials characteristics, and adsorption ESMs. It is found that an ESM shield surrounded by multiple layer insulation provides the best protection for a cryogen store.

Grodzka, P. G.↗
NASA NTRS1977

Wash water reclamation technology for advanced manned spacecraft

The results of an analytical study and assessment of state-of-the-art wash water reclamation technology for advanced manned spacecraft is presented. All non-phase-change unit operations, unit processes, and subsystems currently under development by NASA are considered. Included among these are: filtration, ultrafiltration, carbon adsorption, ion exchange, chemical pretreatment, reverse osmosis, hyperfiltration, and certain urea removal techniques. Performance data are given together with the projected weights and sizes of key components and subsystems. In the final assessment, a simple multifiltration approach consisting of surface-type cartridge filters, carbon adsorption and ion exchange resins receives the highest rating for six-man orbital missions of up to 10 years in duration.

Putnam, D. F.↗
NASA NTRS1978

Molten Salt Thermal Energy Storage Systems

The feasibility of storing thermal energy at temperatures of 450 C to 535 C in the form of latent heat of fusion was examined for over 30 inorganic salts and salt mixtures. Alkali carbonate mixtures were chosen as phase-change storage materials in this temperature range because of their relatively high storage capacity and thermal conductivity, moderate cost, low volumetric expansion upon melting, low corrosivity, and good chemical stability. Means of improving heat conduction through the solid salt were explored.

Maru, H. C.↗
NASA NTRS1977

On the radiative damping of atmospheric waves

General expressions for computing time constants for radiative decay of harmonic temperature perturbations in planetary atmospheres are developed. Four spatial scales are shown to be generally important: the scale height of the atmospheric absorber, the absorption mean free path for thermal radiation, the altitude above the planetary surface, and the wavelength of the temperature perturbation. Atmospheric inhomogeneity is particularly important when the radiation mean free path and the vertical wavelength divided by 2 pi both exceed the absorber scale height. The surface is very important for wave decay at altitudes less than a few radiation mean free paths, and its effect depends on a comparison of the surface response time and the lifetime of the atmospheric perturbation. The surface response time depends on the conducting and emitting properties of the surface material and on the strength of turbulence in the planetary boundary layer. The additional influence of chemical reactions and phase changes on radiative damping is discussed, and several assumptions inherent in the development of the general expressions for time constants are evaluated. Terrestrial examples are used for purposes of illustration, but the development is kept sufficiently general so that the results remain applicable to most situations on other planets.

Prinn, R. G.↗
NASA NTRS1977

Large-scale thermal energy storage using sodium hydroxide /NaOH/

A technique employing NaOH phase change material for large-scale thermal energy storage to 900 F (482 C) is described; the concept consists of 12-foot diameter by 60-foot long cylindrical steel shell with closely spaced internal tubes similar to a shell and tube heat exchanger. The NaOH heat storage medium fills the space between the tubes and outer shell. To charge the system, superheated steam flowing through the tubes melts and raises the temperature of NaOH; for discharge, pressurized water flows through the same tube bundle. A technique for system design and cost estimation is shown. General technical and economic properties of the storage unit integrated into a solar power plant are discussed.

Turner, R. H.↗