Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Effect of Fuel Reactivity and End- Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

Zdanowicz, Andrew↗

Effect of Fuel Reactivity and End-Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

Effects of radiation and compression on propagating spherical flames of methane/air mixtures near the lean flammability limit

Large discrepancies between the laminar flame speeds and Markstein lengths measured in experiments and those predicted by simulations for ultra-lean methane/air mixtures bring a great concern for kinetic mechanism validation. In order to quantitatively explain these discrepancies, a computational study is performed for propagating spherical flames of lean methane/air mixtures in different spherical chambers using different radiation models. The emphasis is focused on the effects of radiation and compression. It is found that the spherical flame propagation speed is greatly reduced by the coupling between thermal effect (change of flame temperature or unburned gas temperature) and flow effect (inward flow of burned gas) induced by radiation and/or compression. As a result, for methane/air mixtures near the lean flammability limit, the radiation and compression cause large amounts of under-prediction of the laminar flame speeds and Markstein lengths extracted from propagating spherical flames. Since radiation and compression both exist in the experiments on ultra-lean methane/air mixtures reported in the literature, the measured laminar flame speeds and Markstein lengths are much lower than results from simulation and thus cannot be used for kinetic mechanism validation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale cohesive zone model for propagation of segmented crack fronts in mode I+III fracture

Quasistatic crack propagation in mixed-mode I+III fracture is widely observed to be unstable, the instability being characterized by the segmentation of the parent crack into a periodic array of daughter cracks shaped as flat facets rotated towards the principal stress axis. While there has been recent progress to characterize this instability, no global theory is presently available to describe all aspects of the propagation of the segmented front, including both “local” features like the angle of rotation of the facets and the ratio of their width to their spacing, and “global” ones like the effective energy-release-rate of the segmented crack front and the tendency of the facets to coarsen. This paper embarks on the development of such a theory, based on the assumption that the spacing of the facets is much smaller than their length, and asymptotic matching of outer and inner solutions for the mechanical fields on scales comparable to the facet length and spacing, respectively. Here, the inner problem is shown to reduce to a 2D linear elastic fracture mechanics problem in the plane perpendicular to the crack propagation axis. The solution of this problem is used to develop an effective cohesive zone description of the crack front on a scale much larger than the facet spacing. Such a description leads to a system of 1D integral equations for the outer mechanical fields on the cohesive zone, which may be solved numerically. Numerical examples are given that notably illustrate the prediction of the effective energy-release-rate of the segmented crack front in terms of the various geometrical parameters; this energy-release-rate is predicted to be smaller for a segmented front than for the parent planar front, with the conclusion that segmentation acts as a toughening mechanism. Implications upon the phenomenon of facet coarsening are also briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of alternative plant propagation and stand establishment techniques on survival and growth of eastern cottonwood (Populus deltoides Bartr.) clones.

Four eastern cottonwood clones, including standard operational clone ST66 and three advanced clonal selections were produced and included in a test utilizing five different plant propagation methods. Despite relatively large first-year growth differences among clones, all clones demonstrated similar responses to the treatments and clone 9 cutting treatment interactions were generally non-significant. The effects of changing cutting lengths are consistent with previous studies which indicated the potential for increased plant survival and growth with increased cutting lengths. Differences in stored carbohydrate reserves alone do not appear to completely control first-year growth and development of cuttings. First-year growth of 51 cm long cuttings planted 30.5 cm deep was greater than the same cuttings planted 48 cm deep. Stem form of plants derived from whip-tip propagation did not differ from plants derived from standard, unrooted cuttings. This propagation method offers the potential of far greater production capacity from a cutting orchard and rapid bulk-up of new or limited clones. Stand uniformity assessments suggest that surviving trees of each individual cutting treatment exhibit similar levels of growth variation. Optimization of plantation establishment techniques has the potential to increase growth of young Populus plantations.

60 APPLIED LIFE SCIENCES↗

Fatigue Crack Propagation of Nickel-Based Superalloy: Experiments and Simulations with Extended Finite Element Method

Numerical simulation based on extended finite element method was employed to investigate the fatigue crack propagation of nickel-based superalloy at room temperature. Experimental tests on compact tension specimens have performed to obtain fatigue crack propagation parameters in Paris region. The extended finite element method has presented a new approach to solve the stress intensity factors and can effectively predict crack propagation without re-meshing at crack tip. The simulation results are in good accordance with experimental data in real 3D cases.

36 MATERIALS SCIENCE↗

Laser 3D Printing of Fe-Based Bulk Metallic Glass: Microstructure Evolution and Crack Propagation

This work presents a comprehensive study of microstructure evolution, crack development and hardness performance of Fe-based bulk metallic glass parts processed by laser 3D printing. The combination of a low scan speed and high energy density generates a low temperature gradient, leading to supercooling and the formation of coarse dendrite and cellular crystal microstructure. Columnar dendrites grow in a single direction with large stress, and cracks are easily formed between the dendrites. The stress intensity factor (SIF) caused by the crack surface tension is small, the crack healing effect is weak, and it is difficult to prevent crack propagation. Cellular grain growth is uniform and more easily accommodates the strain, preventing crack initiation and propagation. In contrast, use of a high scan speed with low energy input produces a fine and uniform dendrite or even nanocrystalline, microstructure with microcracks. The SIF caused by the crack surface tension is large, and the crack healing effect is strong and prevents crack initiation and propagation. For low energy density, the hardness of the sample is similar to the hardness of the cast amorphous. This result indicates that the printing sample retained some amorphous characteristics.

36 MATERIALS SCIENCE↗

Experimental Measurement and Analysis of Stress/Shock Wave Propagation Speed through Pre-strained Silicone Foam Pads under Lateral Confinement

Foam materials are increasingly utilized in aerospace, military, and transportation applications to mitigate blast or shock impact. When foam materials are subjected to an external high-speed impact, shock, or blast loading, an elastic wave or shock wave will form and propagate through the thickness of the foam materials. Here, silicone foam pads, which were confined laterally and pre-strained to different levels, were experimentally characterized and theoretically analyzed to understand their effects on wave propagation characteristics under impact loading. Depending on impact velocity, either an elastic strain wave or a shock wave would be generated in the silicone foam pad with different pre-strains. Above a certain impact velocity, a shock wave will be generated whereas, below this threshold impact velocity, an elastic strain wave will be generated. This threshold impact velocity depends on the pre-strain applied to the silicone foam pad. Equations are provided to estimate the wave propagation speed for either an elastic or a shock wave from the amount of pre-strain in the silicone foam pads and the impact velocity. These equations are expected to help improve silicone foam design and assembly processes for shock or blast mitigation applications.

36 MATERIALS SCIENCE↗

A Novel Design of Guiding Stress Wave Propagation

Impact loads can induce a series of undesirable physical phenomena including vibration, acoustical shock, perforation, fracture and fragmentation, etc. The energy associated with the impact loads can lead to severe structure damage and human injuries. A design approach which effectively reduces these negative impacts through shock/stress wave diversion is highly needed. In this paper, a computational model which predicts stress wave propagation by considering different beam geometries and configurations is developed. Additionally, a novel concept of wave guide design which modifies the stress wave propagation path without disturbance is also presented. Furthermore, this design approach is not only useful for material property characterization particularly at intermediate or high strain rates, but also allows stress wave propagation in a desired direction as the shock/impact energy can be redistributed in controllable paths. The numerical results are experimentally verified through a Drop-Hopkinson bar apparatus at Sandia National Laboratories.

36 MATERIALS SCIENCE↗

Discrete symmetries and the propagator approach to coupled fermions in Quantum Field Theory. Generalities: The case of a single fermion-antifermion pair

Starting from Wigner's symmetry representation theorem, we give a general account of discrete symmetries (parity P, charge conjugation C, time-reversal T), focusing on fermions in Quantum Field Theory. We provide the rules of transformation of Weyl spinors, both at the classical level (grassmanian wave functions) and quantum level (operators). Making use of Wightman's definition of invariance, we outline ambiguities linked to the notion of classical fermionic Lagrangian. We then present the general constraints cast by these transformations and their products on the propagator of the simplest among coupled fermionic system, the one made with one fermion and its antifermion. Last, we put in correspondence the propagation of C eigenstates (Majorana fermions) and the criteria cast on their propagator by C and CP invariance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the influence of singlet oxygen molecules on the speed of flame propagation in methane-air mixture

The effect of the presence of singlet oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) in a CH{sub 4}-air mixture on the speed of laminar flame propagation is considered. The known experimental data on the laminar flame speed and ignition delay are used to validate the developed kinetic model involving electronically excited oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) and O{sub 2}(b{sup 1}{sigma}{sub g}{sup +}). Numerical simulation shows that the presence of 10% O{sub 2}(a{sup 1}{delta}{sub g}) in molecular oxygen enables to increase significantly (by a factor of 1.7) the speed of flame propagation in a fuel-lean ({phi}=0.45) methane-air mixture. The main reason for such an acceleration of flame propagation is the intensification of chain reactions due to addition of singlet delta oxygen molecules. For a fuel-rich mixture ({phi}=1.9), the growth in the flame speed is significantly smaller and attains a factor of 1.4. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flame propagation enhancement by plasma excitation of oxygen. Part II: Effects of O{sub 2}(a{sup 1}{delta}{sub g})

The isolated effect of O{sub 2}(a{sup 1}{delta}{sub g}) on the propagation of C{sub 2}H{sub 4} lifted flames was studied at reduced pressures (3.61 kPa and 6.73 kPa). The O{sub 2}(a{sup 1}{delta}{sub g}) was produced in a microwave discharge plasma and was isolated from O and O{sub 3} by NO addition to the plasma afterglow in a flow residence time on the order of 1 s. The concentrations of O{sub 2}(a{sup 1}{delta}{sub g}) and O{sub 3} were measured quantitatively through absorption by sensitive off-axis integrated-cavity-output spectroscopy and one-pass line-of-sight absorption, respectively. Under these conditions, it was found that O{sub 2}(a{sup 1}{delta}{sub g}) enhanced the propagation speed of C{sub 2}H{sub 4} lifted flames. Comparison with the results of enhancement by O{sub 3} found in part I of this investigation provided an estimation of 2-3% of flame speed enhancement for 5500 ppm of O{sub 2}(a{sup 1}{delta}{sub g}) addition from the plasma. Numerical simulation results using the current kinetic model of O{sub 2}(a{sup 1}{delta}{sub g}) over-predicts the flame propagation enhancement found in the experiments. However, the inclusion of collisional quenching rate estimations of O{sub 2}(a{sup 1}{delta}{sub g}) by C{sub 2}H{sub 4} mitigated the over-prediction. The present isolated experimental results of the enhancement of a hydrocarbon fueled flame by O{sub 2}(a{sup 1}{delta}{sub g}), along with kinetic modeling results suggest that further studies of C{sub n}H{sub m} + O{sub 2}(a{sup 1}{delta}{sub g}) collisional and reactive quenching are required in order to correctly predict combustion enhancement by O{sub 2}(a{sup 1}{delta}{sub g}). The present experimental results will have a direct impact on the development of elementary reaction rates with O{sub 2}(a{sup 1}{delta}{sub g}) at flame conditions to establish detailed plasma-flame kinetic mechanisms. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory of the propagation dynamics of spiral edges of diffusion flames in von Karman swirling flows

This analysis addresses the propagation of spiral edge flames found in von Karman swirling flows induced in rotating porous-disk burners. In this configuration, a porous disk is spun at a constant angular velocity in an otherwise quiescent oxidizing atmosphere. Gaseous methane is injected through the disk pores and burns in a flat diffusion flame adjacent to the disk. Among other flame patterns experimentally found, a stable, rotating spiral flame is observed for sufficiently large rotation velocities and small fuel flow rates as a result of partial extinction of the underlying diffusion flame. The tip of the spiral can undergo a steady rotation for sufficiently large rotational velocities or small fuel flow rates, whereas a meandering tip in an epicycloidal trajectory is observed for smaller rotational velocities and larger fuel flow rates. A formulation of this problem is presented in the equidiffusional and thermodiffusive limits within the framework of one-step chemistry with large activation energies. Edge-flame propagation regimes are obtained by scaling analyses of the conservation equations and exemplified by numerical simulations of straight two-dimensional edge flames near a cold porous wall, for which lateral heat losses to the disk and large strains induce extinction of the trailing diffusion flame but are relatively unimportant in the front region, consistent with the existence of the cooling tail found in the experiments. The propagation dynamics of a steadily rotating spiral edge is studied in the large-core limit, for which the characteristic Markstein length is much smaller than the distance from the center at which the spiral tip is anchored. An asymptotic description of the edge tangential structure is obtained, spiral edge shapes are calculated, and an expression is found that relates the spiral rotational velocity to the rest of the parameters. A quasiestatic stability analysis of the edge shows that the edge curvature at extinction in the tip region is responsible for the stable tip anchoring at the core radius. Finally, experimental results are analyzed, and theoretical predictions are tested. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of sound propagation in Mars' lower atmosphere

Acoustics has become extraterrestrial and Mars provides a new natural laboratory for testing sound propagation models compared to those ones on Earth. Owing to the unique combination of a microphone and two sound sources, the Ingenuity helicopter and the SuperCam laser-induced sparks, the Mars 2020 Perseverance rover payload enables the in situ characterization of unique sound propagation properties of the low-pressure CO 2 -dominated Mars atmosphere. In this study, we show that atmospheric turbulence is responsible for a large variability in the sound amplitudes from laser-induced sparks. This variability follows the diurnal pattern of turbulence. In addition, acoustic measurements acquired over one Martian year reveal a variation of the sound intensity by a factor of 1.8 from a constant source due to the seasonal cycle of pressure and temperature that significantly modifies the acoustic impedance and shock-wave formation. Finally, we show that the evolution of the Ingenuity tones and laser spark amplitudes with distance is consistent with one of the existing sound absorption models, which is a key parameter for numerical simulations applied to geophysical experiments on CO 2 -rich atmospheres. Overall, these results demonstrate the potential of sound propagation to interrogate the Mars environment and will therefore help in the design of future acoustic-based experiments for Mars or other planetary atmospheres such as Venus and Titan.

79 ASTRONOMY AND ASTROPHYSICS↗

Propagation of non-Gaussian voltage angle fluctuations in high-voltage power grids

Recent measurements have reported non-Gaussian tails in the distribution of frequency data in electric power grids. Large frequency deviations may induce grid instabilities and it is therefore crucial to understand how noise disturbances with long, non-Gaussian tails propagate. Here, we investigate how fluctuations in power feed-in, characterized by non-zero cumulants of their distribution, propagate through high-voltage power grids. Unlike previous investigations which focused on the white-noise limit, we consider the limit of long noise correlation time, where power feed-in fluctuates over times longer than the inherent dynamical time scales of the grid - the relevant regime for large-scale, high-voltage distribution grids. In this work, we show that in this limit, the skewness and kurtosis of the power feed-in distribution propagate similarly as its variance, independently of the distribution of inertia. Non-Gaussianities from individual sources of noise therefore persist throughout the entire network. This finding is corroborated by numerical results on a realistic model of the synchronous grid of continental Europe.

42 ENGINEERING↗

Propagating neutronic uncertainties for FFTF LOFWOS Test #13

The safety evaluation conducted for licensing a Sodium-cooled Fast Reactor (SFR) may require modeling transients with best-estimate calculation tools that must first be validated against real-world measurements. To provide the community with a valuable benchmarking opportunity for validating SFR analysis tools and methods, the International Atomic Energy Agency (IAEA) initiated a coordinated research project (CRP) in 2018 for the analysis of the Fast Flux Test Facility (FFTF) Loss of Flow Without Scram (LOFWOS) Test #13. The impact of nuclear data uncertainties on neutronics parameters was previously investigated based on the COMMARA-2.0 covariance matrix. Since the transient simulation results are very sensitive to certain reactivity coefficients, it was decided to employ rigorous uncertainty propagation methods to quantify the impact of nuclear data uncertainties on the best-estimate predication of FFTF LOFWOS Test #13. The DAKOTA code is used to propagate neutronic uncertainties through SAS4A/SASSYS-1 transient simulations, while taking into account spatial and reaction-wise correlations within these uncertainties. This study shows that the remaining discrepancies observed between the Argonne National Laboratory (ANL) best-estimate results and the experimental measurements can be partly explained by the uncertainty associated with Gas Expansion Module (GEM) worth, which contributes the majority of the overall nuclear data uncertainty on the output from the FFTF LOFWOS Test #13 transient simulation. This study also confirmed the importance of including spatial and reaction-wise correlations of nuclear data uncertainties on feedback coefficients in the uncertainty propagation to avoid under-estimating their impact during the transient simulations.

42 ENGINEERING↗

Strongly Coupled Exciton–Surface Lattice Resonances Engineer Long-Range Energy Propagation

Achieving propagation lengths in hybrid plasmonic systems beyond typical values of tens of micrometers is important for quantum plasmonics applications. Iin this paper, we report long-range optical energy propagation due to excitons in semiconductor quantum dots (SQDs) being strongly coupled to surface lattice resonance (SLRs) in silver nanoparticle arrays. Photoluminescence (PL) measurements provide evidence of an exciton-SLR (ESLR) mode extending at least 600 mu m from the excitation region. We also observe additional energy propagation with range well beyond the ESLR mode and with dependency on the coupling strength, g, between SQDs and SLR. Cavity quantum electrodynamics calculations capture the nature of the PL spectra for consistent g values, while coupled dipole calculations show a SQD number-dependent electric field decay profile consistent with the experimental spatial PL profile. Our results suggest an exciting direction wherein SLRs mediate long-range interactions between SQDs, having possible applications in optoelectronics, sensing, and quantum information science.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modeling Frequency–Independent Q Viscoacoustic Wave Propagation in Heterogeneous Media

Quantifying the attenuation of seismic waves propagating in the Earth interior is critical to study the subsurface structure. Previous studies have proposed fractional anelastic wave equations to model the frequency–independent Q seismic wave propagation. Such wave equations involve fractional derivatives that pose computational challenges for the numerical schemes in terms of accuracy and efficiency when dealing with heterogeneous Earth media. To tackle these challenges, here we derive a new viscoacoustic wave equation, where the power terms of the fractional Laplacian operators are spatially independent, thus accurate and efficient methods (e.g., the Fourier pseudospectral method) can be adopted. Our derivation enables the resultant equation to capture both amplitude and phase signatures of the anelastic wave propagation by matching the complex wave numbers for all the frequencies of interest. We verify the derivation by comparing the dispersion curves of both the attenuation factor and the phase velocity produced by the new wave equation with their theoretical values as well as the Pierre Shale in situ measurements. Following that, we use a synthetic attenuating gas chimney model to demonstrate the attenuation effects on seismic waveforms and then construct the Q–compensated reverse time migration to undo these effects for seismic image enhancement. Finally, we find that our forward modeling results can characterize the spatiotemporal attenuation effects revealed in the Frio–II CO2 injection time–lapse seismic monitoring data. Here, we expect this proposed equation to be useful to quantify the attenuation in seismic data to push the resolution limits of seismic imaging and inversion.

25 ENERGY STORAGE↗