Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRODUCTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Measurement of differential cross sections and W+/W- cross-section ratios for W boson production in association with jets at $$ \sqrt{s}=8 $$ TeV with the ATLAS detector

This paper presents a measurement of the W boson production cross section and the W + /W - cross-section ratio, both in association with jets, in proton-proton collisions at $\sqrt{s}$ = 8 with the ATLAS experiment at the Large Hadron Collider. The measurement is performed in final states containing one electron and missing transverse momentum using data corresponding to an integrated luminosity of 20.2 fb -1 . Differential cross sections for events with at least one or two jets are presented for a range of observables, including jet transverse momenta and rapidities, the scalar sum of transverse momenta of the visible particles and the missing transverse momentum in the event, and the transverse momentum of the W boson. For a subset of the observables, the differential cross sections of positively and negatively charged W bosons are measured separately. In the cross-section ratio of W + /W - the dominant systematic uncertainties cancel out, improving the measurement precision by up to a factor of nine. The observables and ratios selected for this paper provide valuable input for the up quark, down quark, and gluon parton distribution functions of the proton.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of fiducial differential cross sections of gluon-fusion production of Higgs bosons decaying to WW *→eνμν with the ATLAS detector at s = 8 $$ \sqrt{s}=8 $$ TeV

This paper describes a measurement of fiducial and differential cross sections of gluon-fusion Higgs boson production in the H → W W*→ eνμν channel, using 20.3 fb -1 of proton-proton collision data. The data were produced at a centre-of-mass energy of √=8 TeV at the CERN Large Hadron Collider and recorded by the ATLAS detector in 2012. Cross sections are measured from the observed H→ W W*→ eνμν signal yield in categories distinguished by the number of associated jets. The total cross section is measured in a fiducial region defined by the kinematic properties of the charged leptons and neutrinos. Differential cross sections are reported as a function of the number of jets, the Higgs boson transverse momentum, the dilepton rapidity, and the transverse momentum of the leading jet. The jet-veto efficiency, or fraction of events with no jets above a given transverse momentum threshold, is also reported. All measurements are compared to QCD predictions from Monte Carlo generators and fixed-order calculations, and are in agreement with the Standard Model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for pair production of vector-like top quarks in events with one lepton, jets, and missing transverse momentum in $ \sqrt{s}=13 $ TeV $pp$ collisions with the ATLAS detector

The results of a search for vector-like top quarks using events with exactly one lepton, at least four jets, and large missing transverse momentum are reported. The search is optimised for pair production of vector-like top quarks in the Z(→vv) t + X decay channel. LHC pp collision data at a centre-of-mass energy of √s=13 TeV recorded by the ATLAS detector in 2015 and 2016 are used, corresponding to an integrated luminosity of 36.1 fb -1 . No significant excess over the Standard Model expectation is seen and upper limits on the production cross-section of a vector-like T quark pair as a function of the T quark mass are derived. The observed (expected) 95% CL lower limits on the T mass are 870 GeV (890 GeV) for the weak-isospin singlet model, 1.05 TeV (1.06 TeV) for the weak-isospin doublet model and 1.16 TeV (1.17 TeV) for the pure Zt decay mode. Limits are also set on the mass as a function of the decay branching ratios, excluding large parts of the parameter space for masses below 1 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Wγ and Zγ production in proton-proton collisions at $ \sqrt {s} = 7 $ TeV with the ATLAS detector

We present studies of W and Z bosons with associated high energy photons produced in pp collisions at √s = 7TeV. The analysis uses 35 pb -1 of data collected by the ATLAS experiment in 2010. The event selection requires W and Z bosons decaying into high p T leptons (electrons or muons) and a photon with E T > 15 GeV separated from the lepton(s) by a distance ΔR(l,γ) > 0.7 in η-Φ space. A total of 95 (97) pp → e ± νγ + X(pp → μ ± νγ + X) and 25 (23) pp → e + e - γ + X(pp → μ + μ - γ+X) event candidates are selected. The kinematic distributions of the leptons and photons and the production cross sections are measured. The data are found to agree with Standard Model predictions that include next-to-leading-order O(αα s ) contributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of charm and beauty production at central rapidity versus charged-particle multiplicity in proton-proton collisions at $ \sqrt{s}=7 $ TeV

Prompt D meson and non-prompt J/ψ yields are studied as a function of the multiplicity of charged particles produced in inelastic proton-proton collisions at a centre-of-mass energy of √s = 7 TeV. The results are reported as a ratio between yields in a given multiplicity interval normalised to the multiplicity-integrated ones (relative yields). They are shown as a function of the multiplicity of charged particles normalised to the average value for inelastic collisions (relative charged-particle multiplicity). D 0 , D + and D *+ mesons are measured in five p T intervals from 1 GeV/c to 20 GeV/c and for |y| < 0.5 via their hadronic decays. The D-meson relative yield is found to increase with increasing charged-particle multiplicity. For events with multiplicity six times higher than the average multiplicity of inelastic collisions, a yield enhancement of a factor about 15 relative to the multiplicity-integrated yield in inelastic collisions is observed. The yield enhancement is independent of transverse momentum within the uncertainties of the measurement. The D0-meson relative yield is also measured as a function of the relative multiplicity at forward pseudo-rapidity. The non-prompt J/ψ, i.e. the B hadron, contribution to the inclusive J/ψ production is measured in the di-electron decay channel at central rapidity. It is evaluated for p T > 1.3 GeV/c and |y| < 0.9, and extrapolated to p T > 0. The fraction of non-prompt J/ψ in the inclusive J/ψ yields shows no dependence on the charged-particle multiplicity at central rapidity. Charm and beauty hadron relative yields exhibit a similar increase with increasing charged-particle multiplicity. The measurements are compared to PYTHIA 8, EPOS 3 and percolation calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dark matter interpretations of ATLAS searches for the electroweak production of supersymmetric particles in $ \sqrt{s}=8 $ TeV proton-proton collisions

A selection of searches by the ATLAS experiment at the LHC for the electroweak production of SUSY particles are used to study their impact on the constraints on dark matter candidates. The searches use 20 fb -1 of proton-proton collision data at √s=8 TeV. A likelihood-driven scan of a five-dimensional effective model focusing on the gaugino-higgsino and Higgs sector of the phenomenological minimal supersymmetric Standard Model is performed. This scan uses data from direct dark matter detection experiments, the relic dark matter density and precision flavour physics results. Further constraints from the ATLAS Higgs mass measurement and SUSY searches at LEP are also applied. A subset of models selected from this scan are used to assess the impact of the selected ATLAS searches in this five-dimensional parameter space. These ATLAS searches substantially impact those models for which the mass m($\tilde{χ}$$0\atop{1}$) of the lightest neutralino is less than 65 GeV, excluding 86% of such models. The searches have limited impact on models with larger m($\tilde{χ}$$0\atop{1}$) due to either heavy electroweakinos or compressed mass spectra where the mass splittings between the produced particles and the lightest supersymmetric particle is small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for exclusive or semi-exclusive γγ production and observation of exclusive and semi-exclusive e + e - production in pp collisions at $ \sqrt{s}=7 $ TeV

A search for exclusive or semi-exclusive photon pair production, pp to p(*) + photon pair + p(*) (where p(*) stands for a diffractively-dissociated proton), and the observation of exclusive and semi-exclusive electron pair production, pp to p(*) + ee + p(*), in proton-proton collisions at sqrt(s) = 7 TeV, are presented. The analysis is based on a data sample corresponding to an integrated luminosity of 36 inverse picobarns recorded by the CMS experiment at the LHC at low instantaneous luminosities. Candidate photon pair or electron pair events are selected by requiring the presence of two photons or a positron and an electron, each with transverse energy ET > 5.5 GeV and pseudorapidity abs(eta) < 2.5, and no other particles in the region abs(eta) < 5.2. No exclusive or semi-exclusive diphoton candidates are found in the data. An upper limit on the cross section for the reaction pp to p(*) + photon pair + p(*), within the above kinematic selections, is set at 1.18 pb at 95% confidence level. Seventeen exclusive or semi-exclusive dielectron candidates are observed, with an estimated background of 0.85 +/- 0.28 (stat.) events, in agreement with the QED-based prediction of 16.3 +/- 1.3 (syst.) events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Higgs boson pair production in the γγ$b\overline{b} $ final state with 13 TeV pp collision data collected by the ATLAS experiment

A search is performed for resonant and non-resonant Higgs boson pair production in the γγ$b\overline{b} $ final state. The data set used corresponds to an integrated luminosity of 36.1 fb -1 of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No significant excess relative to the Standard Model expectation is observed. The observed limit on the non-resonant Higgs boson pair cross-section is 0.73 pb at 95% confidence level. This observed limit is equivalent to 22 times the predicted Standard Model cross-section. The Higgs boson self-coupling (κ λ = λ HHH /λ HHH SM ) is constrained at 95% confidence level to -8.2 < κ λ < 13.2. For resonant Higgs boson pair production through X→HH→γγ$b\overline{b} $, the limit is presented, using the narrow-width approximation, as a function of mX in the range 260 GeV < m X < 1000 GeV. The observed limits range from 1.1 pb to 0.12 pb over this mass range. Open image in new window

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and Fabrication of Pellets for Magnesium Production by Carbothermal Reduction

For carbothermal reduction (CTR) to be an economic and clean process for magnesium metal production, operational challenges must be overcome. Strong and reactive precursor pellets are necessary to effectively and selectively produce Mg{sub (g)} from any feedstock. In this study, the effects of ore (magnesia and dolime), carbon (petroleum coke, charcoal, algal char, and carbon black), and binder (organic and inorganic) on pellet strength and reactivity, product yield and purity, and reduction selectivity were analyzed. Theoretically and experimentally, the CTR of dolime (MgO·CaO) favored MgO reduction over CaO reduction; however, with enough carbon and heat, both oxides could be reduced. CaO carbothermal reduction produced CaC{sub 2} and Ca{sub (g).} The selectivity to CaC{sub 2} remained constant (7 ± 4 pct) for all C/MgO·CaO ratios analyzed, while the selectivity to Ca{sub (g)} increased (5 pct → 40 pct) when C/MgO·CaO was increased from 0.5 to 2.0. As the overall metal yield decreased (77.6 pct → 59.7 pct) with increasing CaO reduction (38.2 pct → 78.1 pct), Ca{sub (g)} reverted faster than Mg{sub (g).} Heavy metal impurities primarily remained in the residue (< 30 pct volatilized) and, when volatilized, condensed at high temperatures (700 °C to 1450 °C), relative to light metal impurities (350 °C to 1000 °C, > 78 pct volatilized). Organic binders added reducing power to the pellets but produced frail pellets (radial crush strength = 9.1 ± 0.7 N) after pyrolysis, relative to pellets with inorganic binders (15.1 ± 3.2 N). Kinetic parameters were determined for extruded pellets to predict the reaction rate as a continuous function of pressure and temperature.

36 MATERIALS SCIENCE↗

Overcoming Mobility Lifetime Product Limitations in Vertical Bridgman Production of Cadmium Zinc Telluride Detectors

Cadmium zinc telluride (CZT) possesses excellent material properties for a wide range of applications where room temperature operability, durability, and high efficiency are required. However, because CZT is a challenging material to produce in useful quantities, the growth and fabrication costs have remained high, creating an economic challenge for vendors. While the traveling heater method (THM) is the predominant means of commercial CZT crystal growth, the Vertical Bridgman method (VB) is an attractive alternative due to its relatively fast growth rate. However, VB grown CZT has yet to compete with THM grown CZT, particularly in terms of charge collection efficiencies, where the charge collection efficiency is characterized by the single carrier electron mobility lifetime (μτ e ) product. Despite efforts to overcome this discrepancy, the μτe product in VB grown CZT has remained an order of magnitude lower than THM. Eliminating this difference would bring VB one step closer to outpacing THM in terms of economic feasibility. This paper discusses the development of a unique technique that combines the advantages of both growth methods to better understand this discrepancy and the underlying mechanisms behind it. CZT ingots were grown from melt via VB with highly off-stoichiometric concentrations of tellurium (Te). Melt mixing via accelerated crucible rotation (ACRT) was applied to compensate for any negative effects associated with off-stoichiometry, i.e. flux inclusions. CZT material has been produced at growth rates commensurate with VB (1 ingot/week) and with charge collection efficiencies commensurate with THM (mid 10 -2 cm 2 /V) in long bars typical of commercial applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Biomass Production of Prairie Cordgrass (Spartina pectinata Link.) Using Urea and Kura Clover (Trifolium ambiguum Bieb.) as a Source of Nitrogen

Abstract Optimizing nitrogen (N) management is an important factor for sustainable perennial biomass systems. However, N application is costly, both financially and environmentally. Our objectives were to determine: (1) N rate and plant spacing effects on yield and yield components of prairie cordgrass swards and (2) fertilizer N replacement value (FNRV) of kura clover in prairie cordgrass-kura clover binary mixtures. Plots were established in Illinois, Minnesota, South Dakota, and Wisconsin, USA, in 2010. Kura clover was transplanted on 30-cm centers in all treatments in which it was a component; prairie cordgrass seedlings were transplanted within the kura clover on 60- and 90-cm centers. Monoculture prairie cordgrass stands were established at the same population densities of mixed stands and fertilized with 0, 75, 150, or 225 kg N ha -1 . Biomass was harvested in the autumn from 2011 to 2013. N (urea), year, plant spacing, and year × plant spacing affected prairie cordgrass production at all locations. Prairie cordgrass yield increased with N application, but the response varied by location. N application tended to increase prairie cordgrass tiller density and consistently increased tiller mass. Prairie cordgrass yield with 0 N was equal to or less than the yield of prairie cordgrass/kura clover mixtures at all locations in 2011 and 2012; however, kura clover provided a FNRV of 25–82 kg N ha -1 to prairie cordgrass in 2013. Kura clover has potential to provide N to prairie cordgrass in binary mixtures of these two species and on land that may not be easily farmed due to wetness.

Energy & Fuels↗

Chapter Eight - Optimizing Metabolic Pathways for the Improved Production of Natural Products

Metabolic engineering strives to develop microbial strains that are capable of high-titer production of a variety of industrially significant pharmaceuticals, nutraceuticals, commodity, and high-value compounds. Despite extensive success with many proof-of-concept systems there is still the need for optimization to achieve industrially relevant titers, yields, and productivities. Furthermore, the field of metabolic pathway optimization and balancing has formed to address this need using a scientific and systematic approach. In this chapter, we aim to outline various pathway optimization and system balancing strategies while giving insights and tips into the systems and procedures that have demonstrated recent success in the peer-reviewed literature.

59 BASIC BIOLOGICAL SCIENCES↗

Bioalcohol production from acidogenic products via a two-step process: A case study of butyric acid to butanol

This article presents the full study (lab-scale experimental study and large-scale techno-economic analysis) results of a two-step catalytic process for the conversion of organic waste–derived butyric acid to butanol. Butanol from biomass resources like organic waste promise to become an attractive and sustainable fuel and industrial precursor due to an increase in greenhouse gas content in the atmosphere. Therefore, research in this field is important for energy applications and reduction in greenhouse gas emissions. In this regard, a two-step process was applied in this study to produce butanol from butyric acid that can potentially be derived from organic waste. The two-step process consists of the (1) esterification of butyric acid to methyl butyrate and (2) hydrogenolysis of this methyl butyrate to butanol. The first reaction, esterification of butyric acid, was optimized using carbon-based catalysts. The production of butanol from methyl butyrate via hydrogenolysis was investigated using bimetallic Pt–Co catalysts. The hydrogenolysis of methyl butyrate on these catalysts under optimal conditions of 250 °C, 5 MPa H 2 , and a feed/catalyst weight ratio of 11.2 led to 54.1% selectivity toward 1-butanol. Based on the experimental results, an integrated process simulation model was developed to determine the economic potential of the two-step production of butanol from butyric acid. Using this model, the techno-economic feasibility of the two-step process was analyzed. Here, the minimum selling price (MSP) of 1-butanol produced from butyric acid using this process was US dollars 3.388 per gallon of gasoline equivalent (GGE). This MSP is in the range of recent biofuel market prices of US dollars 2.03/GGE to US dollars 3.83/GGE.

09 BIOMASS FUELS↗

Age-related accumulation of advanced glycation end-products-albumin, S100β, and the expressions of advanced glycation end product receptor differ in visceral and subcutaneous fat

Visceral fat induces more inflammation by activating macrophages than subcutaneous fat, and inflammation is an underlying feature of the pathogeneses of various diseases, including cardiovascular disease and diabetes. Advanced glycation end products (AGEs), S100β, and their receptors, the receptor for advanced glycation end products (RAGE), lead to macrophage activation. However, little information is available regarding the differential accumulations of AGE-albumin (serum albumin modified by AGEs), S100β, or expressions of RAGE in different adipocyte types in fat tissues. In this study, the authors investigated whether age-related AGE-albumin accumulations S100β level, and RAGE expressions differ in subcutaneous and visceral fat tissues. Subcutaneous and visceral fat were harvested from 3- and 28-week-old rats. Macrophage activation was confirmed by Iba1 staining, and AGE-albumin accumulations and RAGE expressions were assessed by confocal microscopy. S100β were analyzed by immunoblotting. It was found that activated macrophage infiltration, AGE-albumin accumulation, and S100β in visceral fat was significantly greater in 28-week-old rats than in 3-week-old rats, but similar in subcutaneous fat. The expression of RAGE in visceral fat was much greater in 28-week-old rats, but its expression in subcutaneous fat was similar in 3- and 28-week-old rats. Furthermore, inflammatory signal pathways (NFκB, TNF-α) and proliferation pathways (FAK) in visceral fat were more activated in 28-week-old rats. These results imply that age-related AGE-albumin accumulation, S100β, and RAGE expression are more prominent in visceral than in subcutaneous fat, suggesting that visceral fat is involved in the pathogenesis of inflammation-induced diseases in the elderly. - Highlights: • The age-related AGE-albumin accumulation and S100β were more prominent in visceral than subcutaneous fat. • The age-related RAGE expression were more prominent in visceral than subcutaneous fat. • The inflammatory signal pathway were more activated in aged animal visceral than subcutaneous fat. • The results suggested visceral fat is involved in inflammation-induced diseases in the elderly.

60 APPLIED LIFE SCIENCES↗

A novel derivative (GTN024) from a natural product, komaroviquinone, induced the apoptosis of high-risk myeloma cells via reactive oxygen production and ER stress

Highlights: • GTN024 induced the apoptosis of MM cell lines including those with high-risk cytogenetic changes. • GTN024 significantly delayed tumor growth, and also showed hematological and systemic safety in our mouse xenograft model. • GTN024 produced reactive oxygen species (ROS), increased phosphorylated eIF2α and induced ER stress-mediated apoptosis. New drugs have significantly improved the survival of patients with multiple myeloma (MM), but the prognosis of MM patients with high-risk cytogenetic changes such as t(4; 14), t(14; 16) or del17p remains very poor. A natural product, komaroviquinone (KQN), was originally isolated from the perennial semi-shrub Dracocephalum komarovi and has anti-protozoal activity against Trypanosoma cruzi, the organism causing Chagas’ disease. Here we demonstrate that a novel KQN-derivative, GTN024, has an anti-MM effect both in vitro and in vivo. GTN024 induced the apoptosis of MM cell lines including those with high-risk cytogenetic changes. GTN024 produced reactive oxygen species (ROS) and increased phosphorylated eIF2α. The ROS production and subsequent endoplasmic reticulum (ER) stress are thought to play a key role in GTN024-induced apoptosis, as the apoptosis was completely abrogated by anti-oxidant treatment. In a mouse xenograft model, an intraperitoneal injection of 20 mg/kg of GTN024 significantly delayed tumor growth. Hematological toxicity and systemic toxicity as indicated by weight loss were not observed. These results suggest that the novel KQN-derivative GTN024 could become a candidate drug for treating high-risk MM.

60 APPLIED LIFE SCIENCES↗