Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Synthesis, structure, and magnetic properties of the novel sodium cobalt tellurate Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36}

The novel single crystal oxide Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} had been successfully synthesized by a self-flux method. Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} crystallizes in hexagonal symmetry, space group P6{sub 3}/m (No.176), with lattice parameters a=9.359 (3) Å, c=9.096 (8) Å, and Z=1. The structure is composed of combining the edge-sharing chains of octahedra, [TeO{sub 6}]{sup 6−} and [Co(1)O{sub 6}]{sup 10−} with the face-sharing chains of triangular prisms, [Co(2)O{sub 6}]{sup 10−} and [Co(3)(Na(3))O{sub 6}]{sup 10−}. Sodium ions partially occupy hexagonal channels along the c-axis that are formed by the connection of the chains. The magnetic susceptibility data show a long-range antiferromagnetic ordering with a Neel temperature of 52 K along the c axis. At temperatures above 200 K, the susceptibility corrected for the diamagnetic contribution can be fit to the Curie–Weiss law for Co{sup 2+} (S=3/2). The anisotropic ferromagnetic and antiferromagnetic feature of Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} was obtained through field-dependent magnetization measurements at low temperature. The ferromagnetic and antiferromagnetic behaviors can be considered from the interactions between the Co ions in 1D zig-zag chains formed by sharing the edges of the Co(1)O{sub 6} octahedra, and the interactions between the interchain Co ions, respectively. -- Graphical abstract: The unit cell (a) and perspective view along [001] (b) of novel single crystal oxide, Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36}. Highlights: • A single crystal of Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} has been synthesized by a self-flux method. • Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} crystallizes in hexagonal symmetry with a space group P6{sub 3}/m. • Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} has an antiferromagnetic ordering with a Neel temperature of 52 K. • Na{sub 5}Co{sub 15.5}Te{sub 6}O{sub 36} shows anisotropic ferro- and antiferromagnetism at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and electronic properties of the new iron selenide Ba{sub 9}Fe{sub 4}Se{sub 16}

The new ternary selenide Ba{sub 9}Fe{sub 4}Se{sub 16} has been synthesized from the reaction of appropriate amounts of elements at high temperature in a silica sealed tube. The compound crystallizes in the tetragonal space group I4{sub 1}/a with a=10.0068(3) Å and c=35.6415(9) Å, Z=4. It is an isostructural compound to the sulfide α-Ba{sub 9}Fe{sub 4}S{sub 15}, which is a high temperature polymorph of β-Ba{sub 9}Fe{sub 4}Se{sub 15} that belongs to the indefinitely adaptive phases series Ba{sub 3}Fe{sub 1+x}S{sub 5}, 0≤x≤1. X-ray powder diffraction and TEM analyses of the synthesized compound were used to determine the phase composition and the structure. The crystal structure can be viewed as overlapping sections along the c axis. Those sections are formed by the coordination polyhedra around barium atoms which can be described as trigonal prisms and bidisphenoids. Within the sections formed by barium polyhedra, isolated pairs of edge sharing FeSe{sub 4} tetrahedra are found. Magnetic measurements performed on Ba{sub 9}Fe{sub 4}Se{sub 16} indicate an antiferromagnetic behavior with Néel temperature of ∼13 K. Possible influence of air exposure on the magnetic properties is also discussed here. The electric measurements show an insulating behavior below 160 K and the dielectric permittivity and loss tangent at the lowest frequency measured reveal a change of slope very close to T{sub N}. However no magneto dielectric effect was evidenced for magnetic fields of up to 3 T. Activation energy, E{sub A}=0.18 eV, was extracted from the AC conductivity plot in the temperature range of 160–300 K. -- Graphical abstract: Experimental electron diffraction (ED) patterns of Ba{sub 9}Fe{sub 4}Se{sub 16} recorded along a-[010]. Highlights: • A new iron selenide material. • A structure resolution by combination of XRD and TEM. • Magnetic properties of the new compound Ba{sub 9}Fe{sub 4}Se{sub 16} are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase equilibria and crystal chemistry of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system at 885 °C in air

The phase diagram of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system at 885 °C in air has been determined. The system consists of two calcium cobaltate compounds that have promising thermoelectric properties, namely, the 2D thermoelectric oxide solid solution, (Ca{sub 3−x}Nd{sub x})Co{sub 4}O{sub 9−z} (0≤x≤0.5), which has a misfit layered structure, and Ca{sub 3}Co{sub 2}O{sub 6} which consists of 1D chains of alternating CoO{sub 6} trigonal prisms and CoO{sub 6} octahedra. Ca{sub 3}Co{sub 2}O{sub 6} was found to be a point compound without the substitution of Nd on the Ca site. The reported Nd{sub 2}CoO{sub 4} phase was not observed at 885 °C. A ternary (Ca{sub 1−x}Nd{sub 1+x})CoO{sub 4−z} (x=0) phase, or (CaNdCo)O{sub 4−z}, was found to be stable at this temperature. A solid solution region of distorted perovskite (Nd{sub 1−x}Ca{sub x})CoO{sub 3−z} (0≤x≤0.25, space group Pnma) was established. In the peripheral binary systems, while a solid solution region was identified for (Nd{sub 1−x}Ca{sub x}){sub 2}O{sub 3−z} (0≤x≤0.2), Nd was not found to substitute in the Ca site of CaO. Six solid solution tie-line regions and six three-phase regions were determined in the CaO–Nd{sub 2}O{sub 3}–CoO{sub z} system in air. - Graphical abstract: Phase diagram of the 1/2 Nd{sub 2}O{sub 3}–CaO–CoO{sub x} system at 885 °C, showing the limits of various solid solutions, and the tie-line relationships of various phases. - Highlights: • Phase diagram of the CaO–1/2 Nd{sub 2}O{sub 3}–CoO{sub z} system constructed. • System consists of thermoelectric oxide (Ca{sub 3−x}Nd{sub x})Co{sub 4}O{sub 9−z} (0≤x≤0.5). • Structures of (Nd{sub 1−x}Ca{sub x})CoO{sub 3−z} and (CaNdCo)O{sub 4−z} determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dysprosium complexes with mono-/di-carboxylate ligands—From simple dimers to 2D and 3D frameworks

Four dysprosium (Dy) single carboxylates, a formate, a propionate, a butyrate and an oxalate have been synthesized and structurally characterized. The structure of Dy(HCO{sub 2}){sub 3} (1) contains nine-fold coordinated Dy polyhedra in perfect tricapped trigonal prisms. They are linked through trigonal O atoms forming 1D pillars which are further linked together through tricapped O atoms into a 3D pillared metal organic framework. The network structure is stable up to 360 °C. The structure of [Dy{sub 2}(C{sub 2}O{sub 4}){sub 3}(H{sub 2}O){sub 6}]·2.5H{sub 2}O (2) contains nine-fold coordinated Dy polyhedra linking together through μ{sub 2}-bridging oxalate anions into a 2D hexagonal layered structure. Both [Dy{sub 2}(Pr){sub 6}(H{sub 2}O){sub 4}]·(HPr){sub 0.5} (3) [Pr=(C{sub 2}H{sub 5}CO{sub 2}){sup −1}] and [Dy{sub 2}(Bu){sub 6}(H{sub 2}O){sub 4}] (4) [Bu=(C{sub 3}H{sub 7}CO{sub 2}){sup −1}] have similar di-nuclear structures. The Raman vibration modes of the complexes have been investigated. - Graphical abstract: Four dysprosium (Dy) complexes with formate, propionate, butyrate and oxalate ligands have been synthesized and characterized. The Dy formato complex has a 3D pillared metal organic framework and the structure is stable up to 360 °C whilst the complexes with longer alkyl chained mono-carboxylates possess similar di-nuclear structures. The Dy oxalato complex has a 2D hexagonal (honeycomb-type) structure. Their Raman vibration modes have been investigated. - Highlights: • New Dysprosium complexes with formate, propionate, butyrate and oxalate ligands. • Crystal structures range from dimers to two and three dimensional frameworks. • Vibrational modes have been investigated and correlated to the structures. • The complexes are thermal robust and stable to over 300 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short-range order in Fe-based metallic glasses: Wide-angle X-ray scattering studies

The local atomic structure of the Fe{sub 80}B{sub 20}, Fe{sub 70}Nb{sub 10}B{sub 20} and Fe{sub 62}Nb{sub 8}B{sub 30} glasses prepared in the form of ribbons has been studied by wide-angle X-ray scattering. Structural information about the amorphous ribbons has been derived from analysis of the radial distribution functions using the least-squares curve-fitting method. The obtained structural parameters indicate that Fe–Fe, Fe–B, Fe–Nb and Nb–B contributions are involved in the near-neighbor coordination spheres. The possible similarities of the local atomic arrangement in the investigated glasses and the crystalline Fe{sub 3}B, Fe{sub 23}B{sub 6} and bcc Fe structures are also discussed. - Graphical abstract: Pair distribution functions (a) and best-fit model and experimental radial distribution functions for Fe{sub 80}B{sub 20} (b), Fe{sub 70}Nb{sub 10}B{sub 20} (c) and Fe{sub 62}Nb{sub 8}B{sub 30} (d) metallic glasses. - Highlights: • The short-range ordering in the Fe-based metallic glasses is presented. • The results of RDF function have been analyzed using the least-squares method. • The Fe–Fe, Fe–B, Fe–Nb or Nb–B contributions are involved in coordination spheres. • The structural unit is distorted triangular prism containing B, Fe or Nb atoms. • Similarities of atomic arrangement in glassy and crystalline structures are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and characterization of acentric BaHf(BO{sub 3}){sub 2} and BaZr(BO{sub 3}){sub 2}

Growth, single crystal X-ray diffraction, polarized Raman and infrared (IR) studies of BaHf(BO{sub 3}){sub 2} are presented. Raman and IR spectra of polycrystalline BaZr(BO{sub 3}){sub 2} are also reported to facilitate assignment of modes. BaHf(BO{sub 3}){sub 2} borate crystallizes in trigonal system, space group R3c, with lattice parameters: a=5.1540(4) Å, c=33.901(3) Å. It accommodates dolomite-like structure doubled in the c direction, which is built of alternating layers of HfO{sub 6} octahedra and BaO{sub 6} distorted trigonal prisms that are connected through borate groups. The obtained structural as well as spectroscopic data show that BaHf(BO{sub 3}){sub 2} is isostructural with BaZr(BO{sub 3}){sub 2} and the deviations from centrosymmetry is small. - Graphical abstract: Arrangement of BO{sub 3} groups in BaHf(BO{sub 3}){sub 2} along the c direction in one unit cell. Dark and light blue denote different borate groups. - Highlights: • BaHf(BO{sub 3}){sub 2} single crystals were grown. • X-ray diffraction showed that this borate crystallizes in the acentric R3c structure. • Raman and IR spectra were measured for BaHf(BO{sub 3}){sub 2} and BaZr(BO{sub 3}){sub 2}, respectively. • Assignment of modes is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel second-order non-linear optical coordination polymer with three-fold interpenetrated CdSO{sub 4}-type network constructed by carboxylate–sulfonate ligands and strontium ions

A novel strontium carboxylate–sulfonate coordination polymer, [Sr(HSIP)(H{sub 2}O){sub 3}]{sub n·}nH{sub 2}O (1) (NaH{sub 2}SIP=5-sulfoisophthalic monosodium salt) has been synthesized by hydrothermal reaction. It was characterized by X-ray single crystal diffraction, infrared spectroscopy, elemental and thermogravimetric analysis. Each strontium atom is eight-coordinate with a distorted bicapped trigonal prismatic arrangement. The whole HSIP{sup 2−} ligand acts as a η{sup 5}μ{sup 4} bridge to generate three-fold interpenetrated CdSO{sub 4}-type network structure, which is constructed from the left- and right-handed helixes paralleled to each other bridged by the HSIP{sup 2−} ligands. The luminescence spectrum indicates an emission maximum at 459 nm. Compound 1 shows a second harmonic generation (SHG) response that is 4 times that of KH{sub 2}PO{sub 4}. - Graphical abstract: The whole HSIP{sup 2−} ligands act as η{sup 5}μ{sup 4} bridges with strontium ions, and the strontium ion is eight-coordinated, showing a distorted bicapped trigonal prism geometry. - Highlights: • A novel coordination polymer with a CdSO{sub 4}-type network structure was synthesized. • It shows a second harmonic generation response that is 4 times that of KH{sub 2}PO{sub 4}. • It is constructed from the helixes paralleled to each other.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of zeolitic imidazolate framework-69 for adsorption separation of ethane and ethylene

The zeolitic imidazolate framework ZIF-69 with topology of GME has been synthesized successfully via a facile hydrothermal synthetic method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption measurements, thermal gravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The ethane/ethylene separation potential was measured by single-component adsorption isotherms, and the selectivity was calculated based on the ideal adsorbed solution theory (IAST). SEM and TEM images confirmed that the as-synthesized seeds possessed a well-crystallized and uniform morphology, appearing as a flat hexagonal prism with double hexagonal pyramid heads. The obtained ZIF-69 exhibited a higher adsorption capacity of C{sub 2}H{sub 6} over C{sub 2}H{sub 4} at 100 kPa, and the C{sub 2}H{sub 6}/C{sub 2}H{sub 4} adsorption selectivity was about 1.7 at below 100 kPa. The outcome would provide a new insight into the study on the effective separation of ethane/ethylene using different topological structures of ZIFs. - Highlights: • The well-crystallized and uniform ZIF-69 seeds were successfully synthesized. • ZIF-69 exhibited great preferential adsorption of C{sub 2}H{sub 6} over C{sub 2}H{sub 4}, with the C{sub 2}H{sub 6} adsorption capacity of 2.2 mmol/g. • C{sub 2}H{sub 6}/C{sub 2}H{sub 4} adsorptive selectivity was about 1.7 at pressure below 100 kPa. • The isosteric heat of C{sub 2}H{sub 6} was around 26 kJ/mol, much lower compared to those π -complexation sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Nomarski DIC and cathodoluminescence (CL) microscopy to building materials

The present study discusses the potential of an integrated application of Nomarski differential interference contrast and cathodoluminescence microscopy for the investigation of building materials such as natural stone, cement, mortar and concrete. Nomarski differential interference contrast microscopy is a modern technique applied in materials sciences to visualize different phases and/or to image the surface relief on the scale of 50 nm. It is based on the principle of beam splitting by a double-crystal prism split, resulting in the superposition of laterally shifted wave fronts. In cathodoluminescence microscopy, the luminescence signal is excited by an electron beam and is generated by different point defects within the material. Therefore, cathodoluminescence is a powerful method to characterize the defect structure of solid materials, to distinguish different phases and to reveal detailed information about their chemical composition. By combining Nomarski differential interference contrast and cathodoluminescence microscopy, textural, crystallographic and chemical information can be obtained from the same sample area in a polished thin section.

36 MATERIALS SCIENCE↗

Relationship between morphologies and orientations of Cu{sub 6}Sn{sub 5} grains in Sn3.0Ag0.5Cu solder joints on different Cu pads

The morphologies and orientations of Cu{sub 6}Sn{sub 5} intermetallic compounds in the Sn3.0Ag0.5Cu solder joints both on polycrystalline and single crystal Cu pads under different peak reflow temperatures and times above liquids were investigated. The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified. At the interface of Sn3.0Ag0.5Cu/polycrystalline Cu pad, scalloped Cu{sub 6}Sn{sub 5} intermetallic compounds formed at 250 °C and roof shape Cu{sub 6}Sn{sub 5} formed at 300 °C. Both scalloped Cu{sub 6}Sn{sub 5} and roof shape Cu{sub 6}Sn{sub 5} had a preferred orientation of (0001) plane being parallel to polycrystalline Cu pad surface. Besides, the percentage of large angle grain boundaries increased as the peak reflow temperature rose. At the interface of Sn3.0Ag0.5Cu/(111) single crystal Cu pad, the Cu{sub 6}Sn{sub 5} intermetallic compounds were mainly scallop-type at 250 °C and were prism type at 300 °C. The prismatic Cu{sub 6}Sn{sub 5} grains grew along the three preferred directions with the inter-angles of 60° on (111) single crystal Cu pad while along two perpendicular directions on (100) single crystal Cu pad. The orientation relationship between Cu{sub 6}Sn{sub 5} grains and the single crystal Cu pads was investigated by electron backscatter diffraction technology. In addition, two types of hollowed Cu{sub 6}Sn{sub 5} intermetallic compounds were found inside the joints of polycrystalline Cu pads. The long hexagonal Cu{sub 6}Sn{sub 5} strips were observed in the joints reflowing at 250 °C while the hollowed Cu{sub 6}Sn{sub 5} strips with the ‘▪’ shape cross-sections appeared at 300 °C, which was attributed to the different grain growth rates of different Cu{sub 6}Sn{sub 5} crystal faces. - Highlights: • The orientation of interfacial Cu{sub 6}Sn{sub 5} grains was obtained by EBSD technology. • Two types of hollowed Cu{sub 6}Sn{sub 5} strips were found at different temperatures. • The formation mechanism of hollowed Cu{sub 6}Sn{sub 5} was elaborated based on Bravais law. • The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified.

36 MATERIALS SCIENCE↗

Structural study by X-ray diffraction and transmission electron microscopy of the misfit compound (SbS{sub 1-x}Se{sub x}){sub 1.16}(Nb{sub 1.036}S{sub 2}){sub 2}

In the Sb-Nb-S-Se system, a new misfit layer compound (MSL) has been synthesized and its structure was determined by combining single crystal X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. It presents a composite crystal structure formed by (SbS{sub 1-x}Se{sub x}) slabs stacking alternately with double NbS{sub 2} layers and both can be treated as separate monoclinic subsystems. The (SbS{sub 1-x}Se{sub x}) slabs comprise a distorted, two-atom-thick layer with NaCl-type structure formed by an array of {l_brace}SbX{sub 5}{r_brace} square pyramids joined by edges (X: S, Se); the NbS{sub 2} layers consist of {l_brace}NbS{sub 6}{r_brace} trigonal prisms linked through edge-sharing to form sheets, just as in the 2H-NbS{sub 2} structure type. Both sublattices have the same lattice parameters a = 5.7672(19) A, c = 17.618(6) A and {beta} = 96.18(3){sup o}, with incommensurability occurring along the b direction: b{sub 1} = 3.3442(13) A for the NbS{sub 2} subsystem and b{sub 2} = 2.8755(13) A for the (SbS{sub 1-x}Se{sub x}) subsystem. The occurrence of diffuse scattering intensity streaked along c{sup *} indicates that the (SbS{sub 1-x}Se{sub x}) subsystem is subjected to extended defects along the stacking direction.

36 MATERIALS SCIENCE↗

Crystallization and morphology of mordenite zeolite influenced by various parameters in organic-free synthesis

Research highlights: {yields} Seed, gel composition and silicon source affect the crystallization process of MOR. {yields} Seed, gel composition and silicon source influence the morphology of MOR. {yields} Low silica concentration results in MOR with high c/b aspect ratio. {yields} Novel nano fiber-like MOR with c/b aspect ratio of 89 was organic-free synthesized. {yields} The morphology of MOR influences its mesopore property and thermal stability. -- Abstract: A series of mordenite zeolites with different morphologies were synthesized via a facile organic-free hydrothermal route, and characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectrometer and N{sub 2} adsorption-desorption techniques. Influences of synthetic parameters, including seed crystal, silicon precursor, SiO{sub 2}/Al{sub 2}O{sub 3}, Na{sub 2}O/SiO{sub 2} and H{sub 2}O/SiO{sub 2}, on mordenite crystallization were investigated systematically. It was found that mordenite zeolites with various morphologies, such as fiber-like, rod-like, prism-like and needle-like ones could be synthesized in control. Especially, novel nano fiber-like MOR crystals with high c/b aspect ratio were prepared from low silica concentration system, which was manipulated by using small initial SiO{sub 2}/Al{sub 2}O{sub 3} ratio, large H{sub 2}O/SiO{sub 2} and silicon source with slow dissolution rate. Moreover, mordenite samples with various morphologies exhibited different mesopore property and thermal stability.

36 MATERIALS SCIENCE↗

Electrodeposited ZnO films with high UV emission properties

Highlights: {yields} Electrodeposition of ZnO from nitrate baths is investigated. {yields} The influence of process parameters on morphological and optical properties is studied. {yields} Experimental conditions to fabricate ZnO films with high UV emission were found. -- Abstract: We report here our results in the preparation of ZnO films with high UV band to band characteristic luminescence emission by potentiostatic electrodeposition. Zinc nitrate aqueous baths with different concentration and additives were employed for the preparation of the films on platinum substrates. We focused our research in determining how the electrodeposition bath composition, i.e. zinc nitrate concentration and addition of KCl or polyvinyl pyrolidone and applied overpotential influence the morphological and optical properties of the oxide films. Scanning electron microscopy was employed for characterizing the films in terms of morphology. Optical reflection, photoluminescence spectroscopy and cathodoluminescence were used for determining the optical characteristics of the samples. The morphology of the deposit varies from hexagonal prisms to platelets as a function of the deposition rate. This experimental parameter also influences the luminescence properties. We found that at low deposition rates high UV luminescent material is obtained.

36 MATERIALS SCIENCE↗

Porous acicular mullite obtained by controlled oxidation of waste molybdenum disilicide

Highlights: • Waste MoSi{sub 2} heating elements were used as starting material for fabrication of porous acicular mullite. • Calcined MoSi{sub 2} powder was source of SiO{sub 2} and pore former at the same time. • Porous acicular mullite is promising material for filtration of diesel engine exhaust. • Samples with decent mechanical integrity and porosity of more than 60% were fabricated. - Abstract: Porous acicular mullite was fabricated by using waste MoSi{sub 2} heating element and Al{sub 2}O{sub 3}. Careful calcination of the pulverized heating element led to the formation of a mixture of MoO{sub 3} and amorphous SiO{sub 2}. This mixture was employed as both SiO{sub 2} precursor and pore former. The oxidation of MoSi{sub 2} and mullite formation were studied. The effect of fabrication temperature on phase composition, porosity, grain morphology, and compressive strength of sintered mullite was examined. Pure mullite with porosity of more than 60% and compressive strength of ∼20 MPa was obtained at temperature as low as 1300 °C. The microstructure consisted of elongated, rectangular, prism-like grains which are known to be effective in filtration of diesel engine exhaust. The increase in sintering temperature caused the change of grain morphology and reduction in compressive strength.

36 MATERIALS SCIENCE↗

Preparation of Gd(OH){sub 3} large single crystals by solid KOH assisted hydrothermal method and their luminescent and magnetic properties

Highlights: • Gd(OH){sub 3} large single crystals were prepared by solid KOH assisted hydrothermal method. • The possible growth mechanism of Gd(OH){sub 3} large single crystals was proposed. • The Gd(OH){sub 3} samples emitted a strong narrow-band ultraviolet B (NB-UVB) light. • The Gd(OH){sub 3} samples showed good paramagnetic properties. - Abstract: Large single crystals of gadolinium hydroxide [Gd(OH){sub 3}] in the length of several millimeters were successfully prepared by using solid KOH assisted hydrothermal method. Gd(OH){sub 3} samples were characterized by X-ray diffraction (XRD), 4-circle single-crystal diffraction, Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). FESEM image shows hexagonal prism morphology for the Gd(OH){sub 3} large crystals. The possible growth mechanism of Gd(OH){sub 3} large single crystals was proposed. The photoluminescence and magnetic properties of Gd(OH){sub 3} species were investigated.

36 MATERIALS SCIENCE↗

Intermediate phases in sodium intercalation into MoS 2 nanosheets and their implications for sodium-ion batteries

Alkali metal ion intercalation into layered transition-metal dichalcogenide structures is a promising approach to make next generation rechargeable batteries for energy storage. It has been noted that the number of Na-ions which can be reversibly intercalated and extracted per MoS 2 is limited, and the chemical and electrochemical processes/mechanisms remain largely unknown, especially for nano-sized materials. Here, in this study, sodiation of MoS 2 nanosheets are studied by in-situ electron diffraction and the phase transformations in sodiation are identified with the aid of DFT calculations to reveal the reaction mechanism. Several thermodynamically stable/metastable structures are identified in the sodiation pathway of MoS 2 nanosheets, previously unnoticed in bulk MoS 2 . The gradual reduction of Mo 4+ upon Na-ion intercalation leads to a transition of the Mo-S polyhedron from a trigonal prism to an octahedron around 0.375 Na per MoS 2 inserted (i.e. Na 0.375 MoS 2 ). When the intercalated Na-content is larger than 1.75 per MoS 2 structural unit (i.e. Na 1.75 MoS 2 ), the MoS 2 layered structure collapses and the intercalation reaction is replaced by an irreversible conversion reaction with the formation of Na 2 S and metal Mo nanoparticles. The calculated sodiation pathways reproduce the experimental sodiation voltages. The current observations provide useful insights in developing sodium-ion batteries with high cycling stability.

25 ENERGY STORAGE↗

Cations controlled growth of β-MnO 2 crystals with tunable facets for electrochemical energy storage

Engineering crystal facets to enhance their functionalities often require complex processing routes to suppress the growth of surfaces with the lowest thermodynamic energies. Herein, we report a unique method to control the morphologies of β-MnO 2 crystals with different occupancy of {100}/{111} facets through the effect of K + cations. Combining aberration-corrected scanning transmission electron microscopy (STEM), ultramicrotomy, and dynamic functional theory (DFT) simulation, we clarified that the β-MnO 2 crystals were formed through a direct solid-state phase transition process. Increasing the concentration of K + cations in the precursor gradually changed the morphology of β-MnO 2 from bipyramid prism ({100}+{111} facets) to an octahedron structure ({111} facets). The K + cations controlled the morphology of β-MnO 2 by affecting the formation of α-K 0.5 Mn 4 O 8 intermediate phase and the subsequent phase transition. Utilizing the β-MnO 2 crystals as the cathode for Li-ion batteries showed that highly exposed {111} facets offered β-MnO 2 crystal better rate performance, with ~70% capacity retention when the charge-discharge rate increased from 20 mA/g to 200 mA/g. Furthermore, our work revealed a new mechanism to tune the morphology of this earth-abundant metal oxide crystal, which could be used to adjust its electrochemical performance for different applications, such as supercapacitors and catalysts for metal-air batteries and fuel cells.

25 ENERGY STORAGE↗

Microstructural, mechanical and optical properties research of a carbon ion-irradiated Y 2 SiO 5 crystal

Ion irradiation has been a popular method to modify properties of different kinds of materials. Ion-irradiated crystals have been studied for years, but the effects on microstructure and optical properties during irradiation process are still controversial. In this study, we used 6 MeV C ions with a fluence of 1 × 10 15 ion/cm 2 irradiated Y 2 SiO 5 (YSO) crystal at room temperature, and discussed the influence of C ion irradiation on the microstructure, mechanical and optical properties of YSO crystal by Rutherford backscattering/channeling analyzes (RBS/C), X-ray diffraction patterns (XRD), Raman, nano-indentation test, transmission and absorption spectroscopy, the prism coupling and the end-facet coupling experiments. We also used the secondary ion mass spectrometry (SIMS) to analyze the elements distribution along sputtering depth. Finally, 6 MeV C ions with a fluence of 1 × 10 15 ion/cm 2 irradiated caused the deformation of YSO structure and also influenced the spectral properties and lattice vibrations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗