SEARCH · Engineering Papers

Results for “POROUS MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Microelectrode Arrays for Electrochemical Cycling of Individual Battery Particles

The electrochemical characterization of battery materials is usually performed on porous electrodes containing conductive additives, binders, and ensembles of redox-active particles at densities as high as 10 15 cm –3 . These complex structures often obscure individual battery particles’ intrinsic properties, hindering insights into the fundamentals of battery electrochemistry. To address this challenge, we developed microelectrode arrays to enable the charge and discharge of individual battery particles in liquid electrolytes. In this Methods and Protocols paper, we describe the fabrication of the microelectrode array chips, the assembly of particles onto microelectrodes, and the different types of electrochemical techniques that can be used, including galvanostatic cycling, cyclic voltammetry, potentiostatic intermittent titration, and electrochemical impedance spectroscopy. We use micron-sized lithium cobalt oxide as a model system to showcase the reliability and versatility of single-particle electrochemical experiments enabled by our microelectrode array. In conclusion, we aim to provide a detailed description to promote future uses of microelectrode arrays in fundamental research of batteries and other electrochemical systems.

25 ENERGY STORAGE↗

DOE OSTI2025

Toward Continuous, Oriented Covalent Organic Framework Membranes for Precise Molecular Separations

The goal of achieving energy-efficient, precise molecular separations has motivated interest in developing and employing porous crystalline frameworks as membrane materials. Covalent organic frameworks (COFs) are ordered crystalline matrices composed of covalently bonded organic monomers and are synthesized via reversible reticular chemistry. COFs possess high porosity, structural tunability, and chemical and thermal stability, making them ideally suited for emerging, high-value membrane separation processes, such as ion separations, organic solvent nanofiltration, and gas separations. Although a range of COF membranes have been fabricated and tested in the past decade, these membranes are primarily polycrystalline, weakly crystalline, and/or discontinuous, resulting in suboptimal performance. In this review, we identify the properties that make COFs well-suited as membrane materials, while critically outlining the shortcomings of existing disordered COF membranes. We then highlight the recent emergence of highly crystalline, continuous, oriented two-dimensional COF membranes as a promising path forward for highly selective molecular separations. These continuous, oriented COF membranes exhibit tunable one-dimensional nanochannels, allowing for ultrafast molecular transport and precise species selectivity, thereby expanding the set of separations that can be practically achieved with membrane systems. We discuss synthesis and modification techniques that result in continuous, oriented COF membranes and evaluate the performance of such membranes for a variety of molecular separations. We conclude by identifying ongoing challenges in the development of COF membranes and outlining the future of their applications in molecular separations, which will necessarily rely on advancements in the synthesis of continuous, oriented membranes.

COF modification↗

DOE OSTI2022

Capture Instead of Release: Defect-Modulated Radionuclide Leaching Kinetics in Metal–Organic Frameworks

Comparison of defect-controlled leaching-kinetics modulation of metal–organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain >99% of the transuranic 241 Am radionuclide after 1 week of storage. Here, we report the possibility of tailoring radionuclide release kinetics in MOFs through framework defects as a function of postsynthetically installed organic ligands including cation-chelating crown ether-based linkers. Based on comprehensive analysis using spectroscopy (EXAFS, UV–vis, FTIR, and NMR), X-ray crystallography (single crystal and powder), and theoretical calculations (nine kinetics models and structure simulations), we demonstrated the synergy of radionuclide integration methods, topological restrictions, postsynthetic scaffold modification, and defect engineering. This combination is inaccessible in any other material and highlights the advantages of using well-defined frameworks for gaining fundamental knowledge necessary for the advancement of actinide-based material development, providing a pathway for addressing upcoming challenges in the nuclear waste administration sector.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2020

Leveraging Framework Instability: A Journey from Energy Storage to Drug Delivery

Amorphous pharmaceuticals often suffer from poor physical stability, which can negate their high solubility, fast dissolution rate, and better oral bioavailability vs. crystalline forms. This represents a major hurdle to processing, storage, and delivery of amorphous pharmaceuticals. Several approaches to addressing these problems have been pursued, but there is still a need for a general method for stabilizing the amorphous form. We describe a novel approach using a water-unstable metal-organic framework as a drug delivery vehicle that demonstrates improved amorphous form stability accompanied by remarkably enhanced solubility and a fast dissolution rate. This research project spanned eleven years from conception to realization and dissemination. With origins in understanding the stability or porous solids for energy storage materials, the work also highlights potential of basic science understanding to illuminate new areas of application.

Chemistry↗

DOE OSTI2026

Binder-Stabilized Carbon Fiber Hosts for High-Utilization Sodium–Polysulfide Flow Catholytes

Sodium-sulfur (Na-S) batteries hold promise as high-energy-density batteries for long-duration energy storage due to their high open circuit voltage and Earth-abundant active materials. However, low utilization of the sulfur active material limits the achievable specific capacity, especially when a liquid polysulfide catholyte is utilized. High-surface-area carbon materials demonstrate promise to increase sulfur utilization in a Na-S battery. To make the carbon host material applicable for a flow battery application, a binder is required to bind the carbon materials together and to a porous substrate. Here, we utilize a composite carbon paper electrode coated by polymer,carbon nanofibers (CNFs) and carbon black (CB). By varying the mass ratios of CNF to CB, we found that a 70/20/10 mass ratio of CNF/CB/binder provided the highest capacity (260 mAh g −1 compared to the baseline of 156 mAh g −1 ) and stable battery performance over 100 cycles. Analysis of the composite electrode and full cells reveals that the amount of CB in the composite electrode influences binder distribution, cell resistance, and full cell performance.

Lehmann, Michelle L. [Oak Ridge National Laborator↗

DOE OSTI2023

Apparatus and method for producing a crystalline film on a substrate surface

An apparatus and method is provided for coating a surface of a material with a film of porous coordination polymer. A first substrate having a first surface to be coated is positioned in a processing chamber such that the first surface is placed in a substantially opposing relationship to a second surface. In some embodiments, the second surface is provided by a wall of the processing chamber, and in other embodiments the second surface is provided by a second substrate to be coated. The first substrate is held such that a gap exists between the first and second surfaces, and the gap is filled with at least one reaction mixture comprising reagents sufficient to form the crystalline film on at least the first surface. A thin gap (e.g., having a thickness less than 2 mm) between the first and second surfaces is effective for producing a high quality film having a thickness less than 100 μm. Confining the volume of the reaction mixture to a thin layer adjacent the substrate surface significantly reduces problems with sedimentation and concentration control. In some embodiments, the size, shape, or average thickness of the gap is adjusted during formation of the film in response to feedback from at least one film growth monitor.

Britt, David K.↗

DOE OSTI2023

System and operation for thermochemical renewable energy storage

Systems and methods for energy storage and energy recovery are provided. An electrical-to-electrical energy storage system includes a thermochemical energy storage device, a blower, a compressor, a turbine, and an electrical generator. The TCES device includes a vessel, a porous bed, and a heater. The porous bed is disposed within an interior volume of the vessel. The porous bed comprises a reactive material. The reactive material is configured to release oxygen upon being heated to a reduction temperature, and generate heat when exposed to oxygen. The heater is in thermal contact with the reactive material. The blower is configured to remove oxygen from the interior volume. The compressor is configured to flow oxygen into the interior volume. The turbine is configured to receive a heated, oxygen-depleted gas from the interior volume. The generator is configured to be powered by the turbine to generate electricity.

Klausner, James F.↗

DOE OSTI2024

Method for producing a crystalline film

A method is provided for coating a surface of a material with a film of porous coordination polymer. A first substrate having a first surface to be coated is positioned in a processing chamber such that the first surface is placed in an opposing relationship to a second surface. The second surface may be provided by a wall of the processing chamber, or in some cases the second surface may be provided by a second substrate to be coated. The first substrate is held such that a gap exists between the first and second surfaces, and the gap is filled with at least one reaction mixture comprising reagents sufficient to form the crystalline film on at least the first surface. A thin gap (e.g., less than 2 mm) between the first and second surfaces is effective for producing a high quality film having a thickness less than 100 μm. Confining the volume of the reaction mixture to a thin layer adjacent the substrate surface significantly reduces problems with sedimentation and concentration control. The size, shape, or average thickness of the gap may be adjusted during formation of the film in response to feedback from at least one film growth monitor.

Britt, David K.↗

DOE OSTI2024

Thermochemical renewable energy storage

Klausner, James F.↗

DOE OSTI2023

Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity

Abstract Flexible metal–organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.

Chemistry↗

DOE OSTI2022

Fundamentals of hydrogen storage in nanoporous materials

Abstract Physisorption of hydrogen in nanoporous materials offers an efficient and competitive alternative for hydrogen storage. At low temperatures (e.g. 77 K) and moderate pressures (below 100 bar) molecular H 2 adsorbs reversibly, with very fast kinetics, at high density on the inner surfaces of materials such as zeolites, activated carbons and metal–organic frameworks (MOFs). This review, by experts of Task 40 ‘Energy Storage and Conversion based on Hydrogen’ of the Hydrogen Technology Collaboration Programme of the International Energy Agency, covers the fundamentals of H 2 adsorption in nanoporous materials and assessment of their storage performance. The discussion includes recent work on H 2 adsorption at both low temperature and high pressure, new findings on the assessment of the hydrogen storage performance of materials, the correlation of volumetric and gravimetric H 2 storage capacities, usable capacity, and optimum operating temperature. The application of neutron scattering as an ideal tool for characterising H 2 adsorption is summarised and state-of-the-art computational methods, such as machine learning, are considered for the discovery of new MOFs for H 2 storage applications, as well as the modelling of flexible porous networks for optimised H 2 delivery. The discussion focuses moreover on additional important issues, such as sustainable materials synthesis and improved reproducibility of experimental H 2 adsorption isotherm data by interlaboratory exercises and reference materials.

08 HYDROGEN↗

DOE OSTI2021

Hygro-thermo-mechanical modeling of partially saturated air-entrained concrete containing dissolved salt and exposed to freeze-thaw cycles

Highlights: • A model for cyclic freezing of air-entrained concrete containing salt is proposed. • The freeze-thaw hysteresis, also including the effect of dissolved salt, is modeled. • The diffusive and convective flux of salt is coupled to the freeze-thaw processes. • The freeze-thaw response of air-entrained concrete containing salt is reproduced. • Liquid absorption from reservoirs increases with an increased concentration of salt. In cold regions, understanding the freeze-thaw behavior of air-entrained concrete is important for designing durable structures and assessing the remaining service life of existing structures. This study presents a hygro-thermo-mechanical multiphase model that describes the cyclic freeze-thaw behavior of partially saturated air-entrained concrete containing dissolved salt. An equilibrium and a non-equilibrium approach are adopted to model the ice formation, including the freeze-thaw hysteresis, inside the porous network. The model also considers the diffusive and convective transport of the dissolved salt coupled to the freeze-thaw processes. Two examples are presented to verify and highlight the capabilities of the model. The first example shows that the model is capable of reproducing the experimentally observed mechanical response of specimens containing NaC1-solutions of different concentrations. In the second example, a larger absorption of liquid from an external reservoir is obtained with an increasing salt concentration in the reservoir, which is consistent with experimental observations.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Mechanistic Insights of Pore Contributions in Carbon Supercapacitors by Modified Step Potential Electrochemical Spectroscopy

Porous carbons are widely used as electrode materials for electrical double layer (EDL)-type supercapacitors. Differentiation of capacitance contributions from micropores and mesopores is important to understand porous carbon capacitive behavior. However, this remains challenging to accomplish. Here, we present an improved step potential electrochemical spectroscopy method to investigate the contributions to capacitance from hierarchical pores and redox processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Quantitative microstructural investigation of 3D-printed and cast cement pastes using micro-computed tomography and image analysis

Highlights: • Processing alters the microstructure in 3D-printed lamellar cubic element. • A unique patterned and connected pore microstructure network exists. • Micro-channels are connected through micro-pores present at interfaces regions. • Three distinct pore volume domains exists in hardened microstructure. • Volume and frequency of pore, hydrated, and unhydrated clusters are dissimilar. Microstructural phases and mechanical properties of lamellar 3D-printed and cast hardened cement paste (hcp) elements were investigated using a lab-based X-ray microscope at two levels of magnification (0.4× and 4×). K-means clustering was used for quantitative image analysis. The entire volume of intact 3-days-old 3D-printed and cast hcp elements was characterized at 0.4× magnification. Three microstructural features (macro-pores, micro-channels, and interfacial micro-pores) were found to reside in three distinct pore size domains. The largest pores of the 3D-printed element were larger than the largest pores of the reference cast hcp element. Moreover, the smallest pore sizes of the 3D-printed element were found to be smaller than those present in the cast counterparts. Micro-channels were found to be connected to one another through the micro-pores present at interfacial regions, indicating the presence of a uniquely patterned and interconnected pore network. The role of locally weak and porous interfaces on mechanical response and fracture properties is discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Brazing methods using porous interlayers and related articles

The disclosure relates to a brazing method for joining substrates, in particular where one of the substrates is difficult to wet with molten braze material. The method includes formation of a porous metal layer on a first substrate to assist wetting of the first substrate with a molten braze metal, which in turn permits joining of the first substrate with a second substrate via a braze metal later in an assembled brazed joint. Ceramic substrates can be particularly difficult to wet with molten braze metals, and the disclosed method can be used to join a ceramic substrate to another substrate. The brazed joint can be incorporated into a solid-oxide fuel cell, for example as a stack component thereof, in particular when the first substrate is a ceramic substrate and the joined substrate is a metallic substrate.

Nicholas, Jason Dale↗

DOE OSTI2023

Brazing methods using porous interlayers and related articles

Nicholas, Jason Dale↗

DOE OSTI2023

Generalizing the Gurson model using symbolic regression and transfer learning to relax inherent assumptions

Abstract To generate material models with fewer limiting assumptions while maintaining closed-form, interpretable solutions, we propose using genetic programming based symbolic regression (GPSR), a machine learning (ML) approach that describes data using free-form symbolic expressions. To maximize interpretability, we start from an analytical, derived material model, the Gurson model for porous ductile metals, and systematically relax inherent assumptions made in its derivation to understand each assumption’s contribution to the GPSR model forms. We incorporate transfer learning methods into the GPSR training process to increase GPSR efficiency and generate models that abide by known mechanics of the system. The results show that regularizing the GPSR fitness function is critical for generating physically valid models and illustrate how GPSR allows a high level of interpretability compared with other ML approaches. The method of systematic assumption relaxation allows the generation of models that address limiting assumptions found in the Gurson model, and the symbolic forms allow conjecture of decreased material strength due to void interaction and non-symmetric void shapes.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Methods—Kintsugi Imaging of Battery Electrodes: Distinguishing Pores from the Carbon Binder Domain using Pt Deposition

The mesostructure of porous electrodes used in lithium-ion batteries strongly influences cell performance. Accurate imaging of the distribution of phases in these electrodes would allow this relationship to be better understood through simulation. However, imaging the nanoscale features in these components is challenging. While scanning electron microscopy is able to achieve the required resolution, it has well established difficulties imaging porous media. This is because the flat imaging planes prepared using focused ion beam milling will intersect with the pores, which makes the images hard to interpret as the inside walls of the pores are observed. It is common to infiltrate porous media with resin prior to imaging to help resolve this issue, but both the nanoscale porosity and the chemical similarity of the resins to the battery materials undermine the utility of this approach for most electrodes. In this study, a technique is demonstrated which uses in situ infiltration of platinum to fill the pores and thus enhance their contrast during imaging. Reminiscent of the Japanese art of repairing cracked ceramics with precious metals, this technique is referred to as the kintsugi method. The images resulting from applying this technique to a conventional porous cathode are presented and then segmented using a multi-channel convolutional method. We show that while some cracks in active material particles were empty, others appear to be filled (perhaps with the carbon binder phase), which will have implications for the rate performance of the cell. Energy dispersive X-ray spectroscopy was used to validate the distribution of phases resulting from image analysis, which also suggested a graded distribution of the binder relative to the carbon additive. The equipment required to use the kintsugi method is commonly available in major research facilities and so we hope that this method will be rapidly adopted to improve the imaging of electrode materials and porous media in general.

25 ENERGY STORAGE↗