Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Synthesis and characterization of a 1D chain-like Cu{sub 6} substituted sandwich-type phosphotungstate with pendant dinuclear Cu–azido complexes

A novel Cu–azido complex modified hexa-Cu{sup II} substituted sandwich-type phosphotungstate [Cu(en){sub 2}]([Cu{sub 2}(en){sub 2}(μ-1,1-N{sub 3}){sub 2}(H{sub 2}O)]{sub 2}[Cu{sub 6}(en){sub 2}(H{sub 2}O){sub 2}(B-α-PW{sub 9}O{sub 34}){sub 2}])·6H{sub 2}O (1) (en=ethylene-diamine) has been prepared under hydrothermal conditions and structurally characterized by elemental analyses, IR spectra, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. 1 displays a beautiful 1-D chain architecture constructed from sandwich-type [Cu{sub 2}(en){sub 2}(μ-1,1-N{sub 3}){sub 2}(H{sub 2}O)]{sub 2}[Cu{sub 6}(en){sub 2}(H{sub 2}O){sub 2}(B-α-PW{sub 9}O{sub 34}){sub 2}]{sup 2−} units and [Cu(en){sub 2}]{sup 2+} linkers. To our knowledge, 1 represents the first hexa-Cu{sup II} sandwiched phosphotungstate with supporting Cu–azido complexes. - Graphical abstract: The first hexa-Cu{sup II} sandwiched phosphotungstate with supporting Cu–azido complexes has been prepared and characterized. Display Omitted - Highlights: • Hexa-copper-substituted phosphotungstate. • Cu–azido complexes modified hexa-Cu{sup II} substituted sandwich-type polyoxometalate. • 1-D chain architecture built by hexa-copper-substituted polyoxotungstate units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and surface modification of hierarchical nanosheets-based ZnO microstructures for dye-sensitized solar cells

This paper reports a simple one-step hydrothermal route for the preparation of hierarchical nanosheets-based ZnO microstructures and their application to dye-sensitized solar cells. The morphologies of the products were controlled by the dosage of the reactants. Their physical characteristics were detected by X-ray diffraction, a field-emission scanning electron microscope and a surface analyzer. It is proved that the sample of ZnO microspheres with larger surface area and stronger light-trapping capacity since the superiority of their entirely spherical structures exhibits better photoelectrochemical properties than the mixtures of ZnO microspheres and ZnO microflowers. A dye-sensitized solar cell assembled by the ZnO microspheres as photoanode shows an energy conversion efficiency of 2.94% after surface modification by tetrabutyl titanate solution at 90 {sup °}C. This result is over 1.6 times higher than the non-modified cell fabricated by the ZnO microspheres on the basis of the external improvement and the stability enhancement for the dye-sensitized ZnO photoanode. - Graphical abstract: Influences on energy conversion efficiency of the dye-sensitized solar cells assembled by decorating hierarchical nanosheets-based ZnO microstructures with tetrabutyl titanate solution at different temperatures. Display Omitted - Highlights: • Hierarchical nanosheets-based ZnO microstructures were controllably synthesized. • The ZnO microspheres show good optical and electrochemical properties. • The ZnO microspheres were modified by C{sub 16}H{sub 36}O{sub 4}Ti solution. • Remarkable increase of conversion efficiency is observed after surface modification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substitution studies of Mn and Fe in Ln{sub 6}W{sub 4}Al{sub 43} (Ln=Gd, Yb) and the structure of Yb{sub 6}Ti{sub 4}Al{sub 43}

The synthesis and characterization of Mn- and Fe-substituted Ln{sub 6}W{sub 4}Al{sub 43} (Ln=Gd, Yb) and Yb{sub 6}Ti{sub 4}Al{sub 43} are reported. The compounds adopt the Ho{sub 6}Mo{sub 4}Al{sub 43} structure type with lattice parameters of a∼11 Å and c∼17.8 Å with structural site preferences for Mn and Fe. The magnetization of Yb{sub 6}W{sub 4}Al{sub 43} is sensitive to Mn and Fe doping, which is evident by an increase in the field dependent magnetization. Gd{sub 6}W{sub 4}Al{sub 43}, Gd{sub 6}W{sub 4}Al{sub 42.31(11)}Mn{sub 0.69(11)}, and Gd{sub 6}W{sub 4}Al{sub 41.69(12)}Fe{sub 1.30(12)} order antiferromagnetically in the ab- and c-directions at 15, 14, and 13 K, respectively, with positive Weiss constants, suggesting the presence of ferromagnetic exchange interactions. Anisotropic magnetization data of Gd{sub 6}W{sub 4}Al{sub 43−y}T{sub y} (T=Mn, Fe) analogs are discussed. - Graphical abstract: The magnetic susceptibility of Ln{sub 6}W{sub 4−x}Al{sub 43−y}T{sub x+y} (Ln = Gd, Yb; T= Mn, Fe). Display Omitted - Highlights: • Single crystals of Ln{sub 6}W{sub 4−x}Al{sub 43−y}T{sub x+y} were grown with Al-flux. • Anisotropic magnetic behavior were determined on single crystals. • Gd{sub 6}W{sub 4−x}Al{sub 43−y}T{sub x+y} (T=Mn, Fe) analogs order antiferromagnetically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO{sub 2} synthesized by microwave assisted solvothermal method: Experimental and theoretical evaluation

In this study, a microwave assisted solvothermal method was used to synthesize TiO{sub 2} with anatase structure. The synthesis was done using Ti (IV) isopropoxide and ethanol without templates or alkalinizing agents. Changes in structural features were observed with increasing time of synthesis and evaluated using periodic quantum chemical calculations. The anatase phase was obtained after only 1 min of reaction besides a small amount of brookite phase. Experimental Raman spectra are in accordance with the theoretical one. Micrometric spheres constituted by nanometric particles were obtained for synthesis from 1 to 30 min, while spheres and sticks were observed after 60 min. - Graphical abstract: FE-SEM images of anatase obtained with different periods of synthesis associated with the order–disorder degree. Display Omitted - Highlights: • Anatase microspheres were obtained by the microwave assisted hydrothermal method. • Only ethanol and titanium isopropoxide were used as precursors during the synthesis. • Raman spectra and XRD patterns were compared with quantum chemical calculations. • Time of synthesis increased the short-range disorder in one direction and decreased in another.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rietveld refinement and dielectric relaxation of a new rare earth based double perovskite oxide: BaPrCoNbO{sub 6}

A new rare earth based double perovskite oxide barium praseodymium cobalt niobate, BaPrCoNbO{sub 6} (BPCN) is synthesized by solid-state reaction technique. Rietveld analysis of X-ray diffraction (XRD) data shows that the compound crystallizes in a perovskite like tetragonal structure which belongs to the I4/mmm space group with lattice parameters a=b=5.6828(9) Å, c=8.063(2) Å. Structural analysis reveals 1:1 ordered arrangement for the Co{sup 2+} and Nb{sup 5+} cations over the six-coordinate B-sites of BPCN. The superlattice line (1 0 1) at 2θ=19.10° arising from the alternate ordering of Co{sup 2+} and Nb{sup 5+} sites is observed in the XRD pattern which confirms the presence of cation ordering in BPCN. Fourier transform infrared spectrum shows two phonon modes of the sample due to the antisymmetric NbO{sub 6} stretching vibration. The relaxation dynamics of the conductive process in BPCN is investigated in the temperature range 303 to 503 K and in the frequency range 100 Hz to 1 MHz using impedance spectroscopy. The relaxation mechanism of the sample in the framework of electric modulus formalism is modeled by Davidson–Cole model (DCM). The values of α (distribution of relaxation time) for the DCM varies from 0.1 to 0.3 which suggests the asymmetric distribution of relaxation time for BPCN. The activation energy of the sample, calculated from both conductivity and modulus spectra, are found to be almost the same ∼0.4 eV, which indicates that the conduction mechanism for BPCN is polaron hopping. The scaling behaviour of the imaginary part of electric modulus suggests that the relaxation follows the same mechanism at various temperatures. - Graphical abstract: Rietveld refinement plot for BPCN. Inset shows the schematic presentation of the BPCN tetragonal unit cell. The Co{sup 2+} atoms are located at the centers of the CoO{sub 6} (blue) octahedra. The Nb{sup 5+} atoms are located at the centers of the NbO{sub 6} (green) octahedra. Display Omitted - Highlights: • BaPrCoNbO{sub 6} is synthesized for the first time. • Rietveld refinement of XRD data confirms tetragonal phase. • XRD confirms the presence of cation ordering in BaPrCoNbO{sub 6}. • The activation energy is ∼0.4 eV. • The conduction mechanism for BPCN is due to polaron hopping.

36 MATERIALS SCIENCE↗

Synthesis and characterization of ASnF{sub 3} (A=Na{sup +}, K{sup +}, Rb{sup +}, Cs{sup +})

A family of alkali metal tin(II) fluorides, ASnF{sub 3} (A=Na{sup +}, K{sup +}, Rb{sup +}, or Cs{sup +}), has been synthesized through a low temperature solvothermal technique. A fluorine free solvent, methanol, was used in the synthesis. NaSnF{sub 3}, KSnF{sub 3}, and RbSnF{sub 3} have been reported previously; however for RbSnF{sub 3} the reported space group is incorrect. CsSnF{sub 3} is a new alkali tin(II) fluoride, and exhibits a ‘zero-dimensional’ crystal structure with isolated SnF{sub 3}{sup −} anions separated by Cs{sup +} cations. In addition to the synthesis, infrared, UV–vis, thermogravimetric and differential thermal analysis measurements were performed. - Graphical abstract: Ball-and-stick diagrams of CsSnF{sub 3}. Display Omitted - Highlights: • A family of ASnF{sub 3} (A=Na{sup +}, K{sup +}, Rb{sup +} or Cs{sup +}) has been synthesized solvothermally at low temperatures. • Fluorine-free solvent, methanol, was used instead of conventional fluorinating agents. • RbSnF{sub 3} described in the correct space group exhibits infinite chains of corner-sharing SnF{sub 4} polyhedra. • New CsSnF{sub 3} exhibits a ‘zero-dimensional’ crystal structure consisting of isolated SnF{sub 3}{sup −} anionic polyhedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion-controlled assembly of silver-di(aminophenyl)sulfone coordination polymers: Syntheses, crystal structures, and solid state luminescence

Five silver coordination polymers, namely, ([Ag(3,3′-daps){sub 2}]·BF{sub 4}){sub n} (1), ([Ag(3,3′-daps){sub 2}]·NO{sub 3}){sub n} (2), [Ag(3,3′-daps)(CF{sub 3}SO{sub 3})]{sub n} (3), ([Ag(4,4′-daps)]·CF{sub 3}SO{sub 3}){sub n} (4), and ([Ag(4,4′-daps)]·ClO{sub 4}){sub n} (5) (3,3′-daps=di(3′-aminodiphenyl)sulfone, and 4,4′-daps=di(4′-aminodiphenyl)sulfone) have been synthesized and structural characterized by elemental analyses, IR spectra, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction analyses. Complex 1 displays a 1D ladder-like chain with four-connected Ag ions and bridged 3,3′-daps. Complex 2 shows other 1D ladder chain modified by tentacles. Complex 3 is a 2D layer structure with both Ag ions and 3,3′-daps are 3-connected nodes. Complex 4 is another 1D ladder chain with three-connected Ag ions and 4,4′-daps. Complex 5 shows a 2D 4{sup 4}-sql net with Ag ions and 4,4′-daps as 4-connected nodes. Moreover, their solid state luminescence and thermal stabilities also have been investigated. - Graphical abstract: Pictogram: Synthetic procedures of the five anion controlled silver coordination polymers. We reported the synthetic procedures, structure, and luminescence property of the five anion controlled silver coordination polymers based on two novel di(aminophenyl)sulfone V-shaped ligands. Display Omitted - Highlights: • Five new silver coordination polymers were synthesized and characterized. • Two novel designed V-shaped di(aminophenyl)sulfone ligands were first introduced to coordination chemistry. • Anions play important roles in determining the five silver coordination polymers. • The structural diversity and photoluminescence property were also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new pyridine-2,3-dicarboxylate coordination polymers prepared from zerovalent metal precursor: Syntheses, luminescent and magnetic properties

Two new K{sup +}/Cu(II) and Zn(II) coordination polymers with pyridine-2,3-dicarboxylate (pydc), (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} (1) and ([Zn(µ-pydc)(H{sub 2}O)(4-mim)]·H{sub 2}O){sub n} (2) (4-mim=4-methylimidazole) have been synthesized from zerovalent metal and characterized by IR, EPR spectroscopy, thermal analysis and single crystal X-ray diffraction techniques. In the sandwiched 3D anionic framework of 1, pydc ligands exhibit hexadentate coordination; tridentate coordination bond with Cu(II) and tridentate ionic interaction with K{sup +} ions. (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} shows a rare topology consists of three dimensional (3,4,5)-connected network with the point symbol of (4{sup 2}.6){sub 2}(4{sup 2}.8{sup 4})(4{sup 3}.6.8{sup 6}){sub 2}. The distorted square pyramidal geometry of 2 is completed with an nitrogen atom from 4-mim and aqua ligand to form a 1D polynuclear structure. The hydrogen bonds link the 1D chains into 3D architecture. The temperature dependent magnetic property of complex 1 has been studied. Complex 2 exhibits unusual yellow luminescence in the solid state at room temperature. - Graphical abstract: Two new K{sup +}/Cu(II) and Zn(II) coordination polymers with pyridine-2,3-dicarboxylate (pydc), (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} (1) and ([Zn(µ-pydc)(H{sub 2}O)(4-mim)]·H{sub 2}O){sub n} (2) (4-mim=4-methylimidazole) have been synthesized from zerovalent metal and characterized by IR, EPR spectroscopy, thermal analysis and single crystal X-ray diffraction techniques. The water soluble (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} shows three dimensional a rare 3,4,5-connected network with the point symbol of (4{sup 2}.6){sub 2}(4{sup 2}.8{sup 4})(4{sup 3}.6.8{sup 6}){sub 2}. The temperature dependent magnetic property of complex 1 has been studied. Complex 2 exhibits unusual yellow luminescence in the solid state at room temperature. Display Omitted - Highlights: • Water-soluble (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} has synthesized. • Zerovalent metal precursors are utilized. • The temperature dependent magnetic properties have been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospun nanofibers of Er{sup 3+}-doped TiO{sub 2} with photocatalytic activity beyond the absorption edge

Er{sup 3+}-doped TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning and characterized by X-ray diffraction, scanning electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy and photocurrent measurement. Photocatalytic activities of the as-prepared samples were evaluated by the decolorization of methyl orange aqueous solution under simulated solar light irradiation. The results indicated that the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers was much higher than that of the undoped one, and the optimal dosage of Er{sup 3+} at 1 mol% achieved the highest degradation rate. Moreover, the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers under the irradiation of light with the wavelength beyond the absorption edge of TiO{sub 2} was explored by the decolorization of a dye, rhodamine B and the photodegradation of a typical colorless pollutant, phenol. The results further revealed the mechanism of the enhanced photocatalytic activity through Er{sup 3+} doping in TiO{sub 2} nanofibers. - Graphical abstract: Display Omitted - Highlights: ●Er{sup 3+}:TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning. ●The photocatalytic activity of Er{sup 3+}:TiO{sub 2} was much higher than that of undoped one. ●Er{sup 3+}:TiO{sub 2} could be activated by the light with wavelength beyond the absorption edge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled release of ibuprofen by meso–macroporous silica

Structured meso–macroporous silica was successfully synthesized from an O/W emulsion using decane as a dispersed phase. Sodium silicate solution, which acts as a silica source and a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (EO{sub 19}PO{sub 39}EO{sub 19}) denoted as P84 was used in order to stabilize the emulsion and as a mesopore template. The materials obtained were characterized through transmission electron microscopy (TEM), scanning electron microscopy (SEM), small-angle X-ray diffraction scattering (SAXS) and nitrogen adsorption–desorption isotherms. Ibuprofen (IBU) was selected as the model drug and loaded into ordered meso–macroporous materials. The effect of the materials’ properties on IBU drug loading and release was studied. The results showed that the loading of IBU increases as the macropore presence in the material is increased. The IBU adsorption process followed the Langmuir adsorption isotherm. A two-step release process, consisting of an initial fast release and then a slower release was observed. Macropores enhanced the adsorption capacity of the material; this was probably due to the fact that they allowed the drug to access internal pores. When only mesopores were present, ibuprofen was probably adsorbed on the mesopores close to the surface. Moreover, the more macropore present in the material, the slower the release behaviour observed, as the ibuprofen adsorbed in the internal pores had to diffuse along the macropore channels up to the surface of the material. The material obtained from a highly concentrated emulsion was functionalized with amino groups using two methods, the post-grafting mechanism and the co-condensation mechanism. Both routes improve IBU adsorption in the material and show good behaviour as a controlled drug delivery system. - Graphical abstract: Ibuprofen release profiles for the materials obtained from samples P84{sub m}eso (black diamonds), P84{sub 2}0% (white squares), P84{sub 5}0% (black triangles), P84{sub 7}5% (white diamonds), P84{sub 7}5% functionalized by grafting (black squares) and P84{sub 7}5% functionalized by co-condensation method (white triangles). Display Omitted - Highlights: • Ordered meso–macroporous material is used as a controlled delivery system for ibuprofen. • Incorporation of macropores in mesoporous silica improves ibuprofen adsorption. • Meso–macroporous structures provide a lower delivery than mesoporous silica. • APTES functionalization in meso–macroporous materials improves ibuprofen adsorption and delivery behaviour.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Nb-doped on the structure and electrochemical performance of LiFePO{sub 4}/C composites

The olivine-type niobium doping Li{sub 1−x}Nb{sub x}FePO{sub 4}/C (x=0, 0.005, 0.010, 0.015, 0.025) cathode materials were synthesized via a two-step ball milling solid state reaction. The effects of Nb doping were charactered by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), galvanostatic intermittent titration technique (GITT), cyclic voltammetry (CV), electrochemical impedance spectra (EIS) and galvanostatic charge–discharge. It is found that Nb doping enlarges the interplanar distance of crystal plane parallel to [0 1 0] direction in LiFePO{sub 4}. In other words, it widens the one dimensional diffusion channels of Li{sup +} along the [0 1 0] direction. Electrochemical test results indicate that the Li{sub 0.99}Nb{sub 0.01}FePO{sub 4}/C composite exhibits the best electrochemical performance with initial special discharge capacity of 139.3 mA h g{sup −1} at 1 C rate. The present synthesis route is promising in making the solid state reaction method more practical for preparation of the LiFePO{sub 4} material. - Graphical abstract: The proper amount of Nb doping widens the one dimensional diffusion channels of Li{sup +} along the [0 1 0] direction. Display Omitted - Highlights: • The Nb doping LiFePO{sub 4}/C is prepared by a facile two-step ball milling solid state reaction. • The sample possesses the better high-rate performance. • The tap density of Li{sub 0.99}Nb{sub 0.01}FePO{sub 4}/C sample is 1.76 g cm{sup −3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local structure around the flux pinning centers in superconducting niobium silicon oxynitride (Nb{sub 0.87}Si{sub 0.09}□{sub 0.04})(N{sub 0.87}O{sub 0.13})

The superconducting transition temperature of niobium silicon oxynitride (Nb{sub 0.87}Si{sub 0.09}□{sub 0.04})(N{sub 0.87}O{sub 0.13}) exhibits a gradual reduction from 16.8 K to around 11 K under an increasing applied magnetic field of up to 14 T. This relatively small T{sub c} reduction under an applied magnetic field suggests a robustness of its superconducting behavior in comparison to that in the parent niobium oxynitride. It was similar to the flux pinning effect observed in the large magnetic hysteresis of the niobium-silicon oxynitrides in our previous study. Both Si K-edge XANES and {sup 29}Si MAS-NMR indicated that the local structure of pinning centers around the silicon atoms close to cationic vacancies was similar to that of Si in amorphous SiO{sub 2} in the rock-salt structure of niobium oxynitride. - Graphical abstract: Potential energy scan of the Si atom in the most stable Si{sub 3}□O{sub 3}N cube around the vacancy in our preliminary simulation on niobium silicon oxynitride (Nb{sub 0.87}Si{sub 0.09}□{sub 0.04})(N{sub 0.87}O{sub 0.13}). A possible distortion of the Si atom was suggested from its octahedral towards tetrahedral position forming the local structure similar to that in amorphous SiO{sub 2}. Display Omitted - Highlights: • Critical current density was enhanced in superconducting niobium oxynitride. • The robustness was introduced by forming rock-salt type niobium silicon oxynitride. • The silicon atom had a local structure similar to that in amorphous SiO{sub 2} in the rock-salt type lattice. • The local structure was formed together with its neighboring cationic vacancy. • It contributed as the flux pinning center in the NbSiNO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2D→3D polycatenated and 3D→3D interpenetrated metal–organic frameworks constructed from thiophene-2,5-dicarboxylate and rigid bis(imidazole) ligands

Hydrothermal reactions of rigid 1,4-bis(imidazol-1-yl)benzene (dib) and 1,4-bis(imidazol-1-yl)-2,5-dimethylbenzene (dimb) with deprotonated thiophene-2,5-dicarboxylic acid (H{sub 2}tdc) in the presence of Zn(II) and Cd(II) salts in H{sub 2}O produced three new metal–organic frameworks, namely, [Zn(µ-tdc)(H{sub 2}O)(µ-dib)]{sub n} (1), [Cd(µ-tdc)(H{sub 2}O)(µ-dib)]{sub n} (2), and ([Cd{sub 2}(µ{sub 3}-tdc){sub 2}(µ-dimb){sub 2}]·(H{sub 2}O)){sub n}(3). These MOFs were characterized by FT-IR spectroscopy, elemental, thermal (TG, DTA, DTG and DSC), and single-crystal X-ray diffraction analyses. Isomorphous complexes 1 and 2 reveal polycatenated 2D+2D→3D framework based on an undulated (4,4)-sql layer. Complex 3 exhibits a new 4-fold interpenetrating 3D framework with the point symbol of 6{sup 6}. Molecular simulations were used to assess the potentials of the complexes for H{sub 2} storage application. Moreover, these coordination polymers exhibit blue fluorescent emission bands in the solid state at room temperature. - Graphical abstract: In this study, hydrothermal reactions of rigid 1,4-bis(imidazol-1-yl)benzene (dib) and 1,4-bis(imidazol-1-yl)-2,5-dimethylbenzene (dimb) with deprotonated thiophene-2,5-dicarboxylic acid (H{sub 2}tdc) in the presence of Zn(II) and Cd(II) salts in H{sub 2}O produced three new metal–organic frameworks. Isomorphous complexes 1 and 2 reveal polycatenated 2D+2D→3D framework based on an undulated (4,4)-sql layer. Complex 3 exhibits a new 4-fold interpenetrating 3D framework with the point symbol of 6{sup 6}. Molecular simulations were used to assess the potentials of the complexes for H{sub 2} storage application. These coordination polymers exhibit blue fluorescent emission bands in the solid state at room temperature. Display Omitted - Highlights: • Complexes 1 and 2 display polycatenated 2D+2D→3D framework. • Complex 3 exhibits a new 4-fold interpenetrating 3D framework. • Complex 1 adsorbs the highest amount of H{sub 2} at 100 bar and 298 K. • Complexes display blue fluorescent emission bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferroelectric performances and crystal structures of (Pb, La)(Zr, Ti, Nb)O{sub 3}

In this study, we focused on Nb and La substituted Pb(Zr, Ti)O{sub 3}: i.e., (Pb, La)(Zr, Ti, Nb)O{sub 3}. As for the samples, dependences of ferroelectric properties on La and Nb compositions were examined. In addition, the crystal structures were analyzed by the Rietveld method, and then a relationship between the metal compositions and the crystal structures were discussed. From P–E hysteresis loop measurements, it was found that the remanant polarization of Pb(Zr, Ti)O{sub 3} was increased by both the La and Nb substitutions although the heavy substitution of La had an undesirable effect. It was also indicated that the Curie temperature decreased with increasing La content. The Rietveld analysis using synchrotron X-ray diffraction patterns demonstrated that the structure distortion was relaxed by the La and Nb substitutions. Such a change in the crystals was well consistent with the harmful effects on the Curie temperature and the remanent polarization by the heavy La substitution. - Graphical abstract: Rietveld refinement pattern of 2 mol% PbSiO{sub 3}-added Pb{sub 0.95}La{sub 0.05}Zr{sub 0.50}Ti{sub 0.45}Nb{sub 0.05}O{sub 3} (synchrotron X-ray diffraction). Display Omitted - Highlights: • (Pb,La)(Zr,Ti,Nb)O{sub 3} were successfully synthesized. • Remanant polarization of Pb(Zr,Ti)O{sub 3} was improved by substitutions of La and Nb. • Crystal structures of (Pb,La)(Zr,Ti,Nb)O{sub 3} were refined and the distortions were estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The crystal structures of Ni{sub 3+x}Sn{sub 4}Zn and Ni{sub 6+x}Sn{sub 8}Zn and their structural relations to Ni{sub 3+x}Sn{sub 4}, NiSn and Ni{sub 5−δ}ZnSn{sub 4}

The crystal structures of two new compounds were determined from single-crystal X-ray diffraction measurements: Ni{sub 3+x}Sn{sub 4}Zn, (x~1.35, a=7.110(2) Å, b=4.123(1) Å, c=10.346(3) Å, β=90.23(2)°, space group I2/m, Z=2. R1=0.025, wR2=0.059 for 748 unique reflections, 35 variable parameters) and Ni{sub 6+x}Sn{sub 8}Zn, x~1.35 (a=12.379(3) Å, b=4.095(1) Å, c=12.155(3) Å, β=116.25(3)°, space group C2/m, Z=2. R1=0.026, wR2=0.052 for 1346 unique reflections, 60 variable parameters). In addition, a structural refinement was performed for Ni{sub 3+x}Sn{sub 4}, x~0.13 (a=12.264(3) Å, b=4.066(1) Å, c=5.223(2) Å, β=104.85(3)°, space group C2/m, Z=2. R1=0.019, wR2=0.046 for 617 unique reflections, 29 variable parameters). The three compounds show pronounced similarities among each other as well as to the crystal structures of surrounding binary Ni–Sn and ternary Ni–Sn–Zn compounds. In particular, the two new compounds form a homologous series with Ni{sub 3+x}Sn{sub 4}, x~0.13. They contain “Ni{sub 4}Sn{sub 4}” and “Ni{sub 2}Sn{sub 4}” building blocks which by different interconnection build up the distinct structures. Topological relations with NiSn and Ni{sub 5−δ}Sn{sub 4}Zn, δ~0.25 are evident. - Graphical abstract: Projection of the structure of Ni{sub 6+x}ZnSn{sub 8}, x~1.35 and constituent building blocks. Display Omitted - Highlights: • The crystal structures of Ni{sub 6+x}Sn{sub 8}Zn and Ni{sub 3+x}Sn{sub 4}Zn were determined using single crystal XRD. • Topological relations to Ni–Sn and Ni–Sn–Zn compounds were established and discussed. • Common structural units were identified and their interconnection patterns described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel Co{sub 3}O{sub 4} porous polyhedrons derived from metal–organic framework toward high performance for electrochemical energy devices

Co{sub 3}O{sub 4} polyhedrons with porous structure have been synthesized simply by annealing Prussian blue analogue (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons at 400 °C in air. The product was characterized by a series of techniques, such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), High-resolution TEM (HRTEM), X-ray Photoelectron Spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) gas adsorption. Interestingly, when evaluated as an anode material for lithium-ion batteries (LIBs), the Co{sub 3}O{sub 4} porous polyhedrons manifested high reversible capacity (about 1200 mAh g{sup −1} at 50 mA g{sup −1}) and excellent cycling performance. Moreover, they also exhibited a high specific capacitance of 110 Fg{sup −1} when used as an electrode in the supercapacitor. It is suggested that the special morphology and porous nanostructure lead to the promising electrochemical properties. - Graphical abstract: Novel and complicated mesoporous architectures of Co{sub 3}O{sub 4} have been fabricated by thermal decomposition of Prussian Blue Analog (PBA) Co{sub 3}[Co(CN){sub 6}]{sub 2} polyhedrons which obtained at the room temperature. When Co{sub 3}O{sub 4} product was evaluated for Li-ion batteries (LIBs), they exhibited high reversible capacity of 1000 mAh g{sup −1} with excellent cycle life because of the hollow/porous structure. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three novel metal-organic frameworks based on flexible porphyrin tetracarboxylic acids as highly effective catalysts

Targeted synthesis of metalloporphyrinic frameworks (MPFs) with Cu(II) (1), Ni(II) (2, 3) 5, 10, 15, 20-tetrakis[4-(carboxymethyleneoxy)phenyl]porphyrin (Cu(TCMOPP) and Ni(TCMOPP)) as building blocks afforded three new extended coordination polymers inter-linked by Zn(II) (1) and K(I) (2, 3). 1 shows 2D frameworks while 2, 3 are 3D frameworks. The open channel are 7–17 Å wide and accessible to guest/solvent molecules. Besides, the thermogravimetric analyses (TGA) indicate that the framework structures of the three compounds are stable until 300 °C. In addition, the catalytic activities of 1–3 to the alkylbenzenes oxidation are examined, and the results indicate that 1 exhibit high catalytic activity to oxidation of ethylbenzene and 1,2,3,4-tetrahydronaphthalene with conversion of 64.1% and 80.3% respectively. - Graphical abstract: Three novel metalloporphyrinic frameworks (1, 2, 3) were synthesized based on tetracarboxylic Cu(II) (1), Ni(II) (2, 3) metalloporphyrin inter-linked by Zn(II) (1) , K(I) (2, 3), and 1 shows high catalytic activity to oxidation reaction of alkylbenzenes with conversion 80.3%. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, structures and characterizations of three novel vanadium selenites with organically bonded copper/nickel complex

A series of vanadium selenites covalently bonded with metal-organic complex, namely, Ni(2,2-bipy){sub 2}V{sub 2}O{sub 4}(SeO{sub 3}){sub 2} (1), Cu(2,2-bipy)V{sub 2}O{sub 4}(SeO{sub 3}){sub 2}·0.5H{sub 2}O (2) and Cu{sub 2}(2,2-bipy){sub 2}V{sub 5}O{sub 12}(SeO{sub 3}){sub 2} (3) (2,2-bipy=2,2-bipyridine) have been hydrothermally synthesized and structurally characterized. They exhibit three different structural dimensions, from 0D cluster, 1D chain to 2D layer. Compound 1 features a 0D {Ni(2,2-bipy)_2V_2O_4(SeO_3)_2}{sub 2} dimeric cluster composed of two {Ni(2,2-bipy)_2}{sup 2+} moieties connected by the {V_4O_8(SeO_3)_4}{sup 4-} cluster. Compound 2 shows a 1D {Cu(2,2-bipy)V_2O_4(SeO_3)_2}{sub n} chain in which the {Cu_2(2,2-bipy)_2}{sup 4+} moieties are bridged by the {V_4O_8(SeO_3)_4}{sup 4−} clusters. Compound 3 displays a 2D structure consisted of mixed valence vanadium selenites layers {V"I"VV"V_4Se"I"V_2O_1_8}{sub n}{sup 4−} and {Cu(2,2-bipy)}{sup 2+} complex moieties. The adjacent layers are further interconnected via π-π interactions between the 2,2-bipy ligands exhibiting an interesting 3D supramolecular architecture. Both compound 1 and 2 contain a new {V_4O_8(SeO_3)_4}{sup 4−} cluster and compound 3 exhibits the first 2D vanadate polyhedral layer in vanadium selenites/tellurites with organic moieties. - Graphical abstract: We got three new vanadium selenites with organically linked copper/nickel complex, namely, Ni(2,2-bipy){sub 2}V{sub 2}O{sub 4}(SeO{sub 3}){sub 2} (1), Cu(2,2-bipy)V{sub 2}O{sub 4}(SeO{sub 3}){sub 2}·0.5H{sub 2}O (2) and Cu{sub 2}(2,2-bipy){sub 2}V{sub 5}O{sub 12}(SeO{sub 3}){sub 2} (3) by hydrothermally syntheses. They display three different structural dimensions, from 0D cluster, to 1D chain and 2D layer. Display Omitted - Highlights: • Three new compounds display three different structural dimensions, from 0D cluster, to 1D chain and 2D layer. • The Tetranuclear {V_4O_8(SeO_3)_4}{sup 4−} cluster and the vanadate {V_5O_1_7}{sub n} 2D layer are observed firstly. • Optical Properties and Magnetic Properties of three compounds are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗