Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OLIVINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

An Exploratory Study of the Viscoelasticity of Phase-Transforming Material

Attenuation and modulus dispersion are typically associated with shear stress and strain. Time-dependent volume changes accompanying pressure variations can give rise to bulk modulus attenuation and dispersion. Phase transformations in a two-phase region are candidates for such phenomena. Here we report laboratory data that are consistent with bulk modulus softening as pressure is cycled in a region of coexisting olivine and spinel. We use Fay70For30 olivine as our sample. Experiments are performed in a multi-anvil high-pressure apparatus (Deformation DIA) using synchrotron (NSLS) X-ray radiation as the probing tool. Pressure is up to 12 GPa and temperature is up to 1450 C. Measurements were carried out within the binary loop where the olivine and spinel phases coexist. We apply a uniaxial oscillation stress onto the sample and Young's modulus and Q{sup -1} are measured at frequencies of 0.1-0.01 Hz. Our results indicate that the sinusoidal force applied to the sample in olivine-ringwoodite region has much lower bulk modulus and higher Q{sup -1} than in the single-phase regions. Our data are consistent with the diffusion controlled model of (Jackson, I., 2007. Physical origins of anelasticity and attenuation in rock, In: Price, G.D. (Ed.) Mineral Physics. Treatise On Geophysics. Elsevier), where the characteristic time decreases with decreasing strain.

04 OIL SHALES AND TAR SANDS↗

Experimental Constraints on the Strength of the Lithospheric Mantle

To provide a better understanding of rheological properties of mantle rocks under lithospheric conditions, we carried out a series of experiments on the creep behavior of polycrystalline olivine at high pressures ({approx}4-9 GPa), relatively low temperatures (673 {le} T {le} 1273 K), and anhydrous conditions, using a deformation-DIA. Differential stress and sample displacement were monitored in situ using synchrotron X-ray diffraction and radiography, respectively. Experimental results were fit to the low-temperature plasticity flow law. On the basis of this analysis, the low-temperature plasticity of olivine deformed under anhydrous conditions is well constrained by our data with a Peierls stress of {sigma}{sub P} = 5.9 {+-} 0.2 GPa, a zero-stress activation energy of E{sub k}(0) = 320 {+-} 50 kJ mol{sup -1}, and A{sub P} = 1.4 x 10{sup -7} s{sup -1} MPa{sup -2}. Compared with published results for high-temperature creep of olivine, a transition from low-temperature plasticity to high-temperature creep occurs at {approx}1300 K for a strain rate of {approx}10{sup -5} s{sup -1}. For a geological strain rate of 10{sup -14} s{sup -1}, extrapolation of our low-temperature flow law to 873 K, the cutoff temperature for earthquakes in the mantle, yields a strength of {approx}600 MPa. The low-temperature, high-stress flow law for olivine in this study provides a solid basis for modeling tectonic processes occurring within Earth's lithosphere.

58 GEOSCIENCES↗

Combined U-Th/He and 40Ar/39Ar geochronology of post-shield lavas from the Mauna Kea and Kohala volcanoes, Hawaii

Late Quaternary, post-shield lavas from the Mauna Kea and Kohala volcanoes on the Big Island of Hawaii have been dated using the {sup 40}Ar/{sup 39}Ar and U-Th/He methods. The objective of the study is to compare the recently demonstrated U-Th/He age method, which uses basaltic olivine phenocrysts, with {sup 40}Ar/{sup 39}Ar ages measured on groundmass from the same samples. As a corollary, the age data also increase the precision of the chronology of volcanism on the Big Island. For the U-Th/He ages, U, Th and He concentrations and isotopes were measured to account for U-series disequilibrium and initial He. Single analyses U-Th/He ages for Hamakua lavas from Mauna Kea are 87 {+-} 40 ka to 119 {+-} 23 ka (2{sigma} uncertainties), which are in general equal to or younger than {sup 40}Ar/{sup 39}Ar ages. Basalt from the Polulu sequence on Kohala gives a U-Th/He age of 354 {+-} 54 ka and a {sup 40}Ar/{sup 39}Ar age of 450 {+-} 40 ka. All of the U-Th/He ages, and all but one spurious {sup 40}Ar/{sup 39}Ar ages conform to the previously proposed stratigraphy and published {sup 14}C and K-Ar ages. The ages also compare favorably to U-Th whole rock-olivine ages calculated from {sup 238}U - {sup 230}Th disequilibria. The U-Th/He and {sup 40}Ar/{sup 39}Ar results agree best where there is a relatively large amount of radiogenic {sup 40}Ar (>10%), and where the {sup 40}Ar/{sup 36}Ar intercept calculated from the Ar isochron diagram is close to the atmospheric value. In two cases, it is not clear why U-Th/He and {sup 40}Ar/{sup 39}Ar ages do not agree within uncertainty. U-Th/He and {sup 40}Ar/{sup 39}Ar results diverge the most on a low-K transitional tholeiitic basalt with abundant olivine. For the most alkalic basalts with negligible olivine phenocrysts, U-Th/He ages were unattainable while {sup 40}Ar/{sup 39}Ar results provide good precision even on ages as low as 19 {+-} 4 ka. Hence, the strengths and weaknesses of the U-Th/He and {sup 40}Ar/{sup 39}Ar methods are complimentary for basalts with ages of order 100-500 ka.

54 ENVIRONMENTAL SCIENCES↗

Temperature Dependence of Aliovalent-vanadium Doping in LiFePO4 Cathodes

Vanadium-doped olivine LiFePO4 cathode materials have been synthesized by a novel low-temperature microwave-assisted solvothermal (MW-ST) method at 300 oC. Based on chemical and powder neutron/X-ray diffraction analysis, the compositions of the synthesized materials were found to be LiFe1-3x/2Vx x/2PO4 (0 x 0.2) with the presence of a small number of lithium vacancies charge-compensated by V4+, not Fe3+, leading to an average oxidation state of ~ 3.2+ for vanadium. Heating the pristine 15 % V-doped sample in inert or reducing atmospheres led to a loss of vanadium from the olivine lattice with the concomitant formation of a Li3V2(PO4)3 impurity phase; after phase segregation, a partially V-doped olivine phase remained. For comparison, V-doped samples were also synthesized by conventional ball milling and heating, but only ~ 10 % V could be accommodated in the olivine lattice in agreement with previous studies. The higher degree of doping realized with the MW-ST samples demonstrates the temperature dependence of the aliovalent-vanadium doping in LiFePO4.

Harrison, Katharine L↗

Incorporation of 16 O-rich anhydrous silicates in the protolith of highly hydrated asteroid Ryugu

The abundant phyllosilicate and carbonate minerals characterizing most of the returned particles from asteroid Ryugu suggest a history of extensive aqueous alteration on its parent body, similar to the rare mineralogically altered, but chemically primitive, CI (Ivuna-type) chondrite meteorites. Particle C0009 differs mineralogically from other Ryugu particles examined so far by containing anhydrous silicates at a level of ~0.5 vol%, and thus can help shed light on the unaltered original materials that constituted Ryugu’s protolith. In situ oxygen isotope measurements of the most Mg-rich olivine and pyroxene in C0009 reveal two populations of Δ 17 O: –25‰ to –15‰ and –8‰ to –3‰. The former and the latter populations correlate well with silicate morphologies similar to those seen in amoeboid olivine aggregates and chondrule phenocrysts, respectively, both of which are abundant in less aqueously altered carbonaceous chondrites. Here, this result also highlights the presence of olivine with Δ 17 O close to the solar value in either a CI chondrite or an asteroid with CI-chondrite characteristics, and provides strong evidence that amoeboid olivine aggregates and Mg-rich chondrules accreted into Ryugu’s protolith. Our data also raise the possibility that the protoliths of CI and other carbonaceous chondrites incorporated similar anhydrous silicates.

58 GEOSCIENCES↗

A laboratory nanoseismological study on deep-focus earthquake micromechanics

Global earthquake occurring rate displays an exponential decay down to ~300 km and then peaks around 550 to 600 km before terminating abruptly near 700 km. How fractures initiate, nucleate, and propagate at these depths remains one of the greatest puzzles in earth science, as increasing pressure inhibits fracture propagation. We report nanoseismological analysis on high-resolution acoustic emission (AE) records obtained during ruptures triggered by partial transformation from olivine to spinel in Mg 2 GeO 4 , an analog to the dominant mineral (Mg,Fe) 2 SiO 4 olivine in the upper mantle, using state-of-the-art seismological techniques, in the laboratory. AEs’ focal mechanisms, as well as their distribution in both space and time during deformation, are carefully analyzed. Microstructure analysis shows that AEs are produced by the dynamic propagation of shear bands consisting of nanograined spinel. These nanoshear bands have a near constant thickness (~100 nm) but varying lengths and self-organize during deformation. This precursory seismic process leads to ultimate macroscopic failure of the samples. Several source parameters of AE events were extracted from the recorded waveforms, allowing close tracking of event initiation, clustering, and propagation throughout the deformation/transformation process. AEs follow the Gutenberg-Richter statistics with a well-defined b value of 1.5 over three orders of moment magnitudes, suggesting that laboratory failure processes are self-affine. The seismic relation between magnitude and rupture area correctly predicts AE magnitude at millimeter scales. A rupture propagation model based on strain localization theory is proposed. Future numerical analyses may help resolve scaling issues between laboratory AE events and deep-focus earthquakes.

58 GEOSCIENCES↗

Apollo 16 rocks - Classification and petrogenetic model

The Apollo 16 rocks include cataclastic anorthosites, two varieties of unequilibrated breccia, two varieties of partly to fully equilibrated breccia, and a sequence of partially melted breccias. The latter, which dominate the Apollo 16 collection, include glass, divitrified glass, mesostasis-olivine-plagioclase rock, mesostasis-rich basalt, basalt, and poikilitic rocks. All sequence members contain vesicles and relics of plagioclase, olivine, pink spinel, and lithic fragments. Their equilibrated matrices define a series from glass, to a plagioclase-olivine-mesostasis assemblage displaying spherulitic and skeletal shaped crystals, through a plagioclase-pyroxene-olivine assemblage displaying euhedral shaped crystals. Such data suggest that the sequence lithologies were derived from breccias or soils that were partially melted in an impact event.

Warner, J. L.↗

Laboratory duplication of comb layering in the Rhum pluton

A description is provided of the texture of harrisite comb layers, taking into account the results of crystallization experiments at controlled cooling rates, which have reproduced the textural change from 'cumulate' to comb-layered harrisite. Melted samples of harrisite were used in the dynamic crystallization experiments considered. The differentiation of a cooling rate run with respect to olivine grain size and shape is shown and three possible origins of hopper olivine in differentiated crystallization runs are considered. It is found that olivine nucleation occurred throughout cooling, except for the incubation period during early cooling. The elongate combed olivines in harrisite apparently grew as the magma locally supercooled to at least 30 C. It is suggested that the branching crystals in most comb layers, including comb-layered harrisite, probably grew along thermal gradients.

Donaldson, C. H.↗

The petrology of the Apollo 12 ilmenite basalt suite

Mineral chemistry data and petrographic interpretations as well as fractionation modeling determined independently indicate that the bulk chemical variations in the ilmenite suite can be reconciled with differentiation within a single cooling unit. Olivine porphyritic basalts, medium-grained basalts with evolved compositions, and coarse-grained olivine cumulates are found in the suite. It is suggested that most of the chemical variation within the suite could result from fractionation of olivine equivalent to the composition of phenocrysts in vitrophyre 12008 which serves well as a parental magma for the other textural-chemical variants. The relative cooling rate sequence within all three textural-chemical subgroups was determined, and systematic correlations between the degree of olivine addition or subtraction and the relative cooling rate is indicated.

Dungan, M. A.↗

Lunar anorthosite paradox - An alternative explanation

In most lunar terrae samples a trend of decreasing Ab-content of plagioclase with increasing Fa-content of olivine is observed. This covariance of composition is the opposite of the trend observed in terrestrial layered intrusions, and contradicts Bowen's reaction series. The 'anomalous' trend is considered in terms of olivine-melt and plagioclase-melt equilibria. The composition of plagioclase crystallizing from a melt depends directly upon the activity of silica in the melt, while the composition of olivine does not. It is proposed that the inverse correlation of plagioclase and olivine compositions in most lunar terrae rocks is a predictable consequence of crystallization from a lunar bulk composition which is poorer in silica than the bulk compositions of terrestrial layered intrusions. The data of Roedder and Weiblen (1974) lend support to this hypothesis.

Drake, M. J.↗

Shock-induced deformation features in terrestrial peridot and lunar dunite

Single crystals of terrestrial olivine were experimentally shock-loaded along the 010 line to peak pressures 280, 330, and 440 kbar, and the resulting deformation features were compared to those in olivine from lunar dunite 72415. Recovered fragments were examined to determine the orientation of the planar fractures. With increasing pressure the percentage of pinacoids and prisms decreases, whereas the percentage of bipyramids increases. The complexity of the distribution of bipyramids also increases with increasing pressure. Other shock-induced deformation features, including varying degrees of recrystallization, are found to depend on pressure, as observed by others. Lunar dunite 72415 was examined and found to contain olivine with well-developed shock-deformation features. The relative proportion of pinacoid, prism, and bipyramid planar fractures measured for olivine from 72415 indicates that this rock appears to have undergone shock pressure in the range 330-440 kbar. If this dunite was brought to the surface of the moon as a result of excavation of an Imbrium event-sized impact crater, the shock-pressure range experienced by the sample and the results of cratering calculations suggest that it could have originated no deeper than 50-150 km.

Snee, L. W.↗

The consanguinity of the oldest Apollo 11 mare basalts

The textural, mineralogical, and chemical relationships between three of the oldest dates lunar mare basalt samples returned by Apollo 11 (10003, 10029 and 10062) were investigated. Very strong resemblances were noted between the modal minerologies of 10003 and 10029. Significantly more modal olivine and cristobalite was observed in 10062 than in the other basalt samples. A detailed examination of mineral-chemical relationships among the samples revealed similarities between 10003 and 10062 and differences between these two rocks and 10029, the most significant of which is the presence of akaganeite in 10029, implying that lawrencite was present in the pristine sample of 10029 but not in 10003 and 10062. Results of a Wright-Doherty mixing program used to test various fractional crystallization schemes show that 10062 can be derived from a liquid with the composition of either 10003 or 10029 by removing 2-5% ilmenite and 5% olivine. By removing about 6% plagioclase, 10003 can be derived from a liquid with the bulk composition of 10062. It is concluded that 10003 and 10029 may have come from different basaltic flows, whereas it is possible that 10003 and 10062 were derived from the same parental magma by near-surface fractionation of olivine plus ilmenite or of plagioclase plus or minus olivine.

Gamble, R. P.↗

Petrology of a sequence of pyroclastic rocks from the valley of Taurus-Littrow /Apollo 17 landing site/

Thirteen samples of core 74001/2, collected at Shorty Crater by Apollo 17, have been analyzed. The samples, taken from the core section below 5.5 cm and representing most of the major stratigraphic units described by Nagle (1978), consist entirely of whole and fragmented orange and black droplets. The grain shape, degree of crystallinity, breakage, vesicularity, predominant olivine shapes, and phenocryst content of about 18,000 droplets were investigated. The crystalline droplets were found to contain olivine and ilmenite as major phases and pyroxene, Cr-spinel and metallic Fe as minor phases. The grain shape, degree of crystallization, olivine shape and olivine composition suggest that a wide range of cooling rates is represented. The upper part of the core section (above 5.5 cm) has undergone in situ reworking by micrometeorites. The 74001/2 samples are believed to be from an ultramafic pyroclastic deposit brought to the surface by the Shorty Crater impact and originally formed by a lava fountain active in the Taurus-Littrow valley 3.5 b.y. ago. The sequence represented in the sample was most likely deposited over a very short period of time.

Heiken, G.↗

Experimental determination of the spinel-garnet boundary in a Martian mantle composition

The high pressure reaction orthopyroxene + clinopyroxene + spinel to garnet + olivine is applicable to the mantle of Mars. Experimental reversals of this reaction in the system CaO-MgO-FeO-Al2O3-SiO2 have been made in the range 1000-1200 C using the bulk composition proposed by Morgan and Anders (1980). At 1000 C, 1100 C, and 1200 C the garnet-out equilibrium is bracketed at 10.8 + or - 0.5, 12.6 + or - 0.5, and 15.2 + or - 0.5 kbars, respectively. A dP/dT slope of 14.0 bar/K at 1000 C increasing to 26.0 bar/K at 1200 C has been inferred. Depending on bulk composition, the mantle of Mars is inferred to have a phase assemblage of either olivine + clinopyroxene + orthopyroxene + garnet or olivine + clinopyroxene + garnet + spinel. In the second, the partial melts will not be buffered by olivine and orthopyroxene and will have markedly lower silica activities than those of the terrestrial mantle.

Patera, E. S.↗

Chondrules and other components in C, O, and E chondrites Similarities in their properties and origins

Three types of chondrules are described that are common to H3, LL3, CM2, CO3, and CV3 chondrites. Low- and high-FeO, porphyritic olivine chondrules contain olivine with Fa0.3-8 and Fa5-50 respectively, and can easily be distinguished petrographically. Poikilitic pyroxene chondrules have 1-20 vol pct olivine (Fa0.2-8) enclosed by low-Ca pyroxene (Fs0.5-7), and also occur in E chondrites. These three types formed in separate nebular regions which had dimensions and spacings such that a few percent of the chondrules that collided to form compound chondrules were of different types. Sorting of chondrule precursor material and mixing of chondrule types probably account for most variations in bulk and mineral chemistry among chondrite groups. Metallic Fe,Ni grains containing 0.1-1 percent Cr, Si, and P are present in low-FeO olivine chondrules from all type 2 and least metamorphosed type 3 chondrites. Metal compositions reflect reduction during chondrule formation in the nebula, not nebular condensation. Opaque matrices in type 3 ordinary and carbonaceous chondrites are somewhat similar in composition and mineralogy, and probably have related origins. It is concluded that chondrules in all known chondrite groups share similar nebular origins.

Scott, E. R. D.↗

Strain analysis of the Leoville chondrite and conditions in asteroidal interiors

Deformed chondrules in the Leoville carbonaceous chondrite define a preferred orientation, also recognized previously in other CV3 chondrites. Identifying the strain mechanism is necessary for understanding the conditions which caused this compressional shortening. Luckly, the major mineralogical constituent of CV3 meteorites is olivine, for which experimental data on strain mechanisms exist. The conditions that caused strain in the olivine were obviously applicable to the whole meteorite. Possible mechanisms of olivine deformation are cataclasis, low temperature plasticity, power low creep, and diffusional flow, each of which occurs under different combinations of temperature and deviatoric stress. Cataclasis can be ruled out on the basis of its high deviatoric stress requirements; some fractures occur in chondrule olivines, but these may have formed during excavation or impact. Low temperature plasticity and power low creep occur by means of various types of lattice dislocations. However, methods of thermal decoration and chemical etching of dislocations failed to indicate evidence for either mechanism. Thus, the inference is that diffusional flow, characteristic of low to moderately high temperatures and low deviatoric stress, was the major deformation mechanism.

Cain, P. M.↗