SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The numerical accuracy of a satellite orbit computation program was investigated. The effects of roundoff and truncation errors on the solution were determined. New formulations that have the mean motion based on the total energy are compared to the more classical formulations and evaluated via numerical experiments.
A numerical finite-difference code has been used to predict helicopter blade loads during realistic self-generated three-dimensional blade-vortex interactions. The velocity field is determined via a nonlinear superposition of the rotor flowfield. Data obtained from a lifting-line helicopter/rotor trim code are used to determine the instantaneous position of the interaction vortex elements with respect to the blade. Data obtained for three rotor advance ratios show a reasonable correlation with wind tunnel data.
The present study generalizes the mapping method of Wisdom (1982) to encompass all gravitational n-body problems with a dominant central mass. The rationale for the generalized mapping method is discussed as well as details for the mapping for the n-body problem. Some refinements of the method are considered, and the relationship of the mapping method to other symplectic integration methods is shown. The method is used to compute the evolution of the outer planets for a billion years. The resulting evolution is compared to the 845 million year evolution of the outer planets performed on the Digital Orerry using standard numerical integration techniques. This calculation provides independent numerical confirmation of the result of Sussman and Wisdom (1988) that the motion of the planet Pluto is chaotic.
The formal retrieval error analysis of Rodgers (1990) allows the quantitative determination of such retrieval properties as measurement error sensitivity, resolution, and inversion bias. This technique was applied to five numerical inversion techniques and two nonlinear iterative techniques used for the retrieval of middle atmospheric constituent concentrations from limb-scanning millimeter-wave spectroscopic measurements. It is found that the iterative methods have better vertical resolution, but are slightly more sensitive to measurement error than constrained matrix methods. The iterative methods converge to the exact solution, whereas two of the matrix methods under consideration have an explicit constraint, the sensitivity of the solution to the a priori profile. Tradeoffs of these retrieval characteristics are presented.
The hybrid experimental-numerical stress-analysis technique, which saw limited applications during the 1950's, has been resurrected with the vastly improved numerical techniques of the 1970's. By inputing the experimental results as initial and boundary conditions, modern computer codes are executed in its generation and application modes to yield results which are unobtainable when only one of the two techniques is used. The hybrid technique thus exemplifies the complementary role of the experimental and numerical techniques.
Matrix method and stiffly stable algorithms in numerical integration for computer aided network design programming
Papers are presented on such topics as the use of semi-Lagrangian advective schemes in meteorological modeling; computation with high-resolution upwind schemes for hyperbolic equations; dynamics of flame propagation in a turbulent field; a modified finite element method for solving the incompressible Navier-Stokes equations; computational fusion magnetohydrodynamics; and a nonoscillatory shock capturing scheme using flux-limited dissipation. Consideration is also given to the use of spectral techniques in numerical weather prediction; numerical methods for the incorporation of mountains in atmospheric models; techniques for the numerical simulation of large-scale eddies in geophysical fluid dynamics; high-resolution TVD schemes using flux limiters; upwind-difference methods for aerodynamic problems governed by the Euler equations; and an MHD model of the earth's magnetosphere.
A new technique of numerical quadrature especially suited for p-version finite element matrices is presented. This new technique separates the integrand into two parts, and numerically operates on each part separately. The objective of this scheme is to minimize the computational cost of integrating the entire element matrix as opposed to minimizing the cost of integrating a single function. The efficiency of the new technique is compared with Gaussian quadrature and found to take a small fraction of the computational effort.
Several numerical integration techniques for solving common aeronomic problems involving species rate equations are compared for speed and accuracy. A newer technique that defines families of species that are nearly conserved is found to be superior to an iterative technique when both methods are applied to simple test problems. The 'conservation' technique is also found to be more economical than the more complex Gear (1969) integration scheme for comparable accuracy.
Four methods for preliminary aerospace vehicle design are reviewed. The first three methods (classical optimization, system decomposition, and system sensitivity analysis (SSA)) employ numerical optimization techniques and numerical gradients to feed back changes in the design variables. The optimum solution is determined by stepping through a series of designs toward a final solution. Of these three, SSA is argued to be the most applicable to a large-scale highly coupled vehicle design where an accurate minimum of an objective function is required. With SSA, several tasks can be performed in parallel. The techniques of classical optimization and decomposition can be included in SSA, resulting in a very powerful design method. The Taguchi method is more of a 'smart' parametric design method that analyzes variable trends and interactions over designer specified ranges with a minimum of experimental analysis runs. Its advantages are its relative ease of use, ability to handle discrete variables, and ability to characterize the entire design space with a minimum of analysis runs.
Computerized design using numerical optimization techniques is discussed and guidelines for writing analysis computer codes that can be readily coupled to optimization codes are presented. The following numerical optimization techniques are examined: random search, sequential unconstrained minimization, direct constrained optimization, and one-dimensional search. A number of design applications are considered including high speed airfoil lift maximization, the preliminary design of a wing, design of a planar tower for optimal geometry, and the conceptual design of a tactical fighter aircraft.
A technique is introduced which extends the range of useful approximation of numerical inversion techniques to many cycles of an oscillatory function without requiring either the evaluation of the image function for many values of s or the computation of higher-order terms. The technique consists in reducing a given initial value problem defined over some interval into a sequence of initial value problems defined over a set of subintervals. Several numerical examples demonstrate the utility of the method.
The development of high-order accurate numerical discretization techniques for irregular domains and meshes is often cited as one of the remaining challenges facing the field of computational fluid dynamics. In structural mechanics, the advantages of high-order finite element approximation are widely recognized. This is especially true when high-order element approximation is combined with element refinement (h-p refinement). In computational fluid dynamics, high-order discretization methods are infrequently used in the computation of compressible fluid flow. The hyperbolic nature of the governing equations and the presence of solution discontinuities makes high-order accuracy difficult to achieve. Consequently, second-order accurate methods are still predominately used in industrial applications even though evidence suggests that high-order methods may offer a way to significantly improve the resolution and accuracy for these calculations. To address this important topic, a special course was jointly organized by the Applied Vehicle Technology Panel of NATO's Research and Technology Organization (RTO), the von Karman Institute for Fluid Dynamics, and the Numerical Aerospace Simulation Division at the NASA Ames Research Center. The NATO RTO sponsored course entitled "Higher Order Discretization Methods in Computational Fluid Dynamics" was held September 14-18, 1998 at the von Karman Institute for Fluid Dynamics in Belgium and September 21-25, 1998 at the NASA Ames Research Center in the United States. During this special course, lecturers from Europe and the United States gave a series of comprehensive lectures on advanced topics related to the high-order numerical discretization of partial differential equations with primary emphasis given to computational fluid dynamics (CFD). Additional consideration was given to topics in computational physics such as the high-order discretization of the Hamilton-Jacobi, Helmholtz, and elasticity equations. This volume consists of five articles prepared by the special course lecturers. These articles should be of particular relevance to those readers with an interest in numerical discretization techniques which generalize to very high-order accuracy. The articles of Professors Abgrall and Shu consider the mathematical formulation of high-order accurate finite volume schemes utilizing essentially non-oscillatory (ENO) and weighted essentially non-oscillatory (WENO) reconstruction together with upwind flux evaluation. These formulations are particularly effective in computing numerical solutions of conservation laws containing solution discontinuities. Careful attention is given by the authors to implementational issues and techniques for improving the overall efficiency of these methods. The article of Professor Cockburn discusses the discontinuous Galerkin finite element method. This method naturally extends to high-order accuracy and has an interpretation as a finite volume method. Cockburn addresses two important issues associated with the discontinuous Galerkin method: controlling spurious extrema near solution discontinuities via "limiting" and the extension to second order advective-diffusive equations (joint work with Shu). The articles of Dr. Henderson and Professor Schwab consider the mathematical formulation and implementation of the h-p finite element methods using hierarchical basis functions and adaptive mesh refinement. These methods are particularly useful in computing high-order accurate solutions containing perturbative layers and corner singularities. Additional flexibility is obtained using a mortar FEM technique whereby nonconforming elements are interfaced together. Numerous examples are given by Henderson applying the h-p FEM method to the simulation of turbulence and turbulence transition.
In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undesirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle orbiter cargo bay. Although the shuttle/Centaur development activity was suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.
In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undersirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle orbiter cargo bay. Although the shuttle/Centaur development activity was suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.
In-space docking and separation maneuvers of spacecraft that have large fluid mass fractions may cause undesirable spacecraft motion in response to the impulsive-acceleration-induced fluid motion. An example of this potential low-gravity fluid management problem arose during the development of the shuttle/Centaur vehicle. Experimentally verified numerical modeling techniques were developed to establish the propellant dynamics, and subsequent vehicle motion, associated with the separation of the Centaur vehicle from the shuttle cargo bay. Although the shuttle/Centaur development activity has been suspended, the numerical modeling techniques are available to predict on-orbit liquid motion resulting from impulsive accelerations for other missions and spacecraft.
An implicit finite difference scheme based on the Newton-Kantorovich technique was developed for the numerical solution of the nonsteady, incompressible, two-dimensional Navier-Stokes equations in conservation-law form. The algorithm was second-order-time accurate, noniterative with regard to the nonlinear terms in the vorticity transport equation except at the earliest few time steps, and spatially factored. Numerical results were obtained with the technique for a circular cylinder at Reynolds number 15. Results indicate that the technique is in excellent agreement with other numerical techniques for all geometries and Reynolds numbers investigated, and indicates a potential for significant reduction in computation time over current iterative techniques.
Methods for data storage and output in data banks and memory files are discussed along with a survey of equipment available for this. Topics discussed include magnetic tapes, magnetic disks, Terabit magnetic tape memory, Unicon 690 laser memory, IBM 1360 photostore, microfilm recording equipment, holographic recording, film readers, optical character readers, digital data storage techniques, and photographic recording. The individual types of equipment are summarized in tables giving the basic technical parameters.