Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Diffusion freezeout in gas-loaded heat pipes.

Experimental diffusion freezeout rates in a gas loaded heat pipe are presented and compared with predictions of an analysis and computer program published earlier. The experimental approach was to pivot a heat pipe on knife edges and use an analytical mass balance to measure the rate of mass migration within the pipe. Diffusion freezeout rates in a water heat pipe were measured as a function of the condenser sink temperature and the condenser-to-sink thermal conductance. Measured rates varied between 19 and 270 mg/hr and yielded 64 to 99 percent agreement with predicted values. These results indicated that the analysis and computer program for predicting the behavior of gas loaded heat pipes are useful tools for designing such systems.

Marcus, B. D.↗

Optical and chemical analysis of iron in Luna 20 plagioclase.

Review of analytical data on the iron content of Luna 20 anorthitic plagioclase, obtained by a highly sensitive technique for measuring polarized absorption related to crystal-field splittings and by automated electron microprobe analysis of oriented single crystals. The iron content is found to range from a few hundredths to a few tenths of a weight per cent from crystal to crystal. The optical and chemical properties of the iron appear to be caused by postcrystallization migration and exsolution. Postcrystallization effects may obscure evidence of the original oxidation state and iron concentration of these crystals.

Bell, P. M.↗

Note on the semiannual effect in the thermosphere.

There are two external heat sources known that oscillate with a period of half a year: (1) the solar heat input associated with the semiannual migration of the subsolar point between both hemispheres, which peaks at the equator and which is small in comparison with that in the annual component, and (2) the auroral heat input associated with the semiannual component in the occurrence of magnetic storms. An attempt is made to show that a number of apparent conflicts in the description and interpretation of the semiannual effect can be resolved by considering some of the dynamic properties of the thermosphere.

Volland, H.↗

Fuel-Retention Properties of Tungsten-Uranium Dioxide Composites

Although tungsten-uranium dioxide composites appear very promising, as fuel element materials for high-temperature nuclear rocket reactors, one of the major problems with these materials is the loss of fuel at reactor operating temperatures (near or above 4500 F). Substantial fuel losses occur by vaporization whenever the uranium dioxide is directly exposed to elevated temperature environments and by fuel migration and vaporization when reactor operating conditions that involve thermal cycling are simulated. Several methods of minimizing fuel loss have been evaluated and appear quite promising.

Gedwill, Michael A.↗

Some observed seasonal changes in extratropical general circulation: A study in terms of vorticity

Extratropical eddy distributions in four months typical of the four seasons are treated in terms of temporal mean and temporal r.m.s. values of the geostrophic relative vorticity. The geographical distributions of these parameters at the 300 mb level show that the arithmetic mean fields are highly biased representatives of the extratropical eddy distributions. The zonal arithmetic means of these parameters are also presented. These show that the zonal-and-time mean relative vorticity is but a small fraction of the zonal mean of the temporal r.m.s. relative vorticity, K. The reasons for considering the r.m.s. values as the temporal normal values of vorticity in the extratropics are given in considerable detail. The parameter K is shown to be of considerable importance in locating the extratropical frontal jet streams (EFJ) in time-and-zonal average distributions. The study leads to an understanding of the seasonal migrations of the EFJ which have not been explored until now.

Srivatsangam, S.↗

The Interdependence of Lake Ice and Climate in Central North America

The author has identified the following significant results. A comparison of lake freeze transition zone migration with the movement of large pressure centers reveals the following consistencies: (1) polar continental cyclones originate within and/or travel along the trend of the transition zone; (2) polar continental anticyclones fail to cross the transition zone; (3) polar outbreak anticyclones pass through the transition zone, apparently unaffected. In addition, storm centers associated with the transition zone undergo significant intensification manifest by a deepening of the pressure through and increased precipitation outside the zone.

Jelacic, A. J.↗

A preliminary investigation of bird classification by Doppler radar

A preliminary study of the application of Doppler radar to the classification of birds is reported. The desirability for improvements in bird classification stems primarily from the hazards they present to jet aircraft in flight and in the vicinity of airports. A secondary need exists in the study of bird migration. The wing body and tail motion of a bird in flight reflect signals which, when analyzed properly present a signature of wing beat pattern which is unique for each bird species. Although the results of this investigation did not validate the feasibility of classifying bird species, they do indicate that a more thorough investigation is warranted. Certain gross characteristics such as wing beat rates, multiple bird patterns, and bird maneuverability, were indicated clearly in the results. Large birds with slow wing beat rates appear to be the most optimum subject for further study with the X-band Doppler radar used in this investigation.

Martinson, L. W.↗

Evaluation of wet tantalum capacitors after exposure to extended periods of ripple current, volume 1

The application of tantalum capacitors in the Viking Lander includes both dc voltage and ripple current electrical stress, high temperature during nonoperating times (sterilization), and high vibration and shock loads. The capacitors must survive these severe environments without any degradation if reliable performance is to be achieved. A test program was established to evaluate both wet-slug tantalum and wet-foil capacitors under conditions accurately duplicating actual Viking applications. Test results of the electrical performance characteristics during extended periods of ripple current, the characteristics of the internal silver migration as a function for extended periods of ripple current, and the existence of any memory characteristics are presented.

Watson, G. W.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The area of snowcover on 10 individual drainage basins in the North Cascades, Washington, has been determined by use of a semi-automatic radiance threshold technique. The result is a unique record of the changing water storage as snow in these important hydrologic units, the runoff of which is utilized for hydroelectric power, dilution of wastes and heat, support of salmon migration, and irrigation. These data allow a new type of hydrologic modelling to proceed which should permit more accurate forecasts of streamflow. A new technique has been developed for measuring snow-covered area or snowline altitude semi-automatically. This variable contour overlay method permits the snowcover to be matched efficiently to the best fit contour of altitude. The motion of the Yentna Glacier during the concluding phase of its surge was successfully measured by a flicker technique using images of two dates. It appears that displacements as small as 100 to 200 m can be measured. Motion of the Tweedsmuir Glacier in Alaska was measured using ERTS-1 images enlarged to 1:50,000. Changes detected included a shock wave moving down the glacier, the margin expanding, the moraine pattern deforming, and the marginal valley deepening.

Meier, M. F.↗

Immiscible materials and alloys

Only immiscible materials which involve a fluid phase have a potential advantage when considered for space processing. Processing of such systems at low gravity can lead to a material which is very homogeneous and contains a finely dispersed mixture of phases. Materials with such structures may exhibit potentially useful properties for such applications as superconductors, dispersion-strengthened materials, superplastic materials, permanent magnets, etc. These conclusions have resulted from review of past efforts in the field of low-g processing of materials containing a liquid phase miscibility gap and from present efforts dealing with such systems. These studies have concentrated on precipitation of liquid droplets in a host liquid during cooling through the miscibility gap. This effort has been to study the agglomeration of the droplets both experimentally and through computer simulation in order to understand the mechansism involved and to deduce the effect of gravity on the droplet distribution and resulting structure of the solidified material. The agglomeration mechanisms treated in detail are those due to diffusional growth and collision processes caused by Stokes on convection current-induced droplet migration.

Markworth, A. J.↗

A concise history of Hawaii

The review outlines the early migration of Polynesian settlers from the Marquesa and Society Islands, develops the ancient societal hierachy, reports on the historic visits of Captain Cook, and describes the gradual weakening of the native culture and population by increased foreign trade and the final annexation of the islands by the United States of America.

Greeley, C. R.↗

Research on the thermal history of the moon

Lunar thermal history modelling is used to demonstrate that a realistic computer simulation can be used to predict major and minor element concentrations, thickness of the lunar crust, and intensity of volcanic activity as a function of time. The models which are most consistent with the observations include: (1) a high surface temperature and low interior temperature during the very early lunar history; (2) high near-surface radioactivity and relatively low radioactivity in the interior; and (3) a molten zone formed at or near the surface which gradually migrates downward with time. Lunar magnetic anomaly calculations show that large anomalies measured at some of the landing sites and above some points on the surface cannot be caused by mere basalts but are consistent with valley fillings of Cayley-like material with a remanent magnetization of about 0.0002 emu/gm.

Source record↗

Differential rotation of solar filaments

The latitudinal component of solar differential rotation and the possibility of a radial component are discussed and compared to the observed rotational velocities of solar filaments. The author's values of rotational rate versus heliographic latitude for 100 points in the solar atmosphere derived from 17 quiescent filaments are shown to be comparable to the rates found by d'Azambuja and d'Azambuja (1948). The filament rate is significantly greater than the spot rate (Newton and Nunn, 1951); the difference cannot be accounted for by the poleward migration of filaments and seems to reflect a true radial gradient of rotational velocity in the sun. It is shown that filaments in closer proximity to active regions usually exhibit no differential rotation, while those far from active regions generally show it clearly. Comparison with Mt. Wilson photospheric Doppler measurements shows that filaments rotate faster than the general photosphere and that the spot rate exceeds that for the general photosphere.

Glackin, D. L.↗

Apollo drill core depth relationships

Preliminary depth relationships are presented for the Apollo 15, 16, and 17 drill core samples. For a given depth in any of these drill stems, the in situ lunar surface depth can be estimated. Ranges of uncertainty are also established, based on percent core recovery and degree of sample disturbance. The most likely explanation for the sample disturbance observed in the top three sections of the Apollo 16 drill stem is sample migration after the stem was capped on the lunar surface; essentially no sample was lost. Similar disturbance occurred in the Apollo 17 drill core, although to a lesser degree. The average original bulk densities (i.e., before any disturbance occurred) of the Apollo 15, 16, and 17 drill cores are 1.76, 1.59, and 1.87 g/cu cm, respectively. The Apollo 15 and 17 values are probably close to the in situ values; but the Apollo 16 average in situ density could be as much as 13% less than the already low density in the drill core.

Carrier, W. D., III↗

Cinder cone growth modeled after Northeast crater, Mount Etna, Sicily

The structure, physical properties of ejecta, ballistics, and growth of Northeast crater, a young pyroclastic cone that originated in 1911 near the summit of Mount Etna, Sicily, were studied in order to form a model of volcano cinder cone growth. Four stages of growth were discerned: (1) a simple cone; (2) a cone with an outward-dipping talus slope; (3) destruction of rounded rim by the inward migration of the upper edge of the talus pile; and (4) extension of limits of talus pile beyond the ballistic limit of ejecta trajectories. The model is used to predict the features of lunar and Martian cones, assuming that they erupted under conditions qualitatively similar to Etna's Northeast crater.

Mcgetchin, T. R.↗

Climatic variations on Mars. II - Evolution of carbon dioxide atmosphere and polar caps

The long-term variations in the atmospheric pressure and the polar cap temperature of Mars resulting from the obliquity oscillations are discussed. In performing these calculations, the assumption is made that the atmosphere is in equilibrium with perennial CO2 ice deposits at the north pole, as is proposed by Leighton and Murray (1966). If heat transport by the atmosphere is neglected, the temperature of CO2 ice at the poles ranges from about 130 K to about 160 K, the corresponding atmospheric pressure rising from a few tenths of a millibar to about 30 mbar, respectively. The neglect of atmospheric heat transport probably underestimates the peak pressure. Because the altitude of the south cap is about 2 km higher than that of the north cap, CO2 ice is unstable there and will migrate to the north cap at a rate of about 10 g/sq cm yr, the implication being that the south residual cap is water ice. A simplified model of the annual polar caps and pressure fluctuations is also presented.

Ward, W. R.↗

The 15 cm diameter ion thruster research

The startup reliability of a 15 cm diameter mercury bombardment ion thruster which employs a pulsed high voltage tickler electrode on the main and neutralizer cathodes is examined. Startup of the thruster is achieved 100% of the time on the main cathode and 98.7% of the time on the neutralizer cathode over a 3640 cycle test. The thruster was started from a 20 C initial condition and operated for an hour at a 600 mA beam current. An energy efficiency of 75% and a propellant utilization efficiency of 77% was achieved over the complete cycle. The effect of a single cusp magnetic field thruster length on its performance is discussed. Guidelines are formulated for the shaping of magnetic field lines in thrusters. A model describing double ion production in mercury discharges is presented. The production route is shown to occur through the single ionic ground state. Photographs of the interior of an operating-hollow cathode are presented. A cathode spot is shown to be present if the cathode is free of low work-function surfaces. The spot is observed if a low work-function oxide coating is applied to the cathode insert. Results show that low work-function oxide coatings tend to migrate during thruster operation.

Wilbur, P. J.↗

Evaluation of wet tantalum capacitors after exposure to extended periods of ripple current, volume 2

The application of tantalum capacitors in the Viking Lander includes dc voltage and ripple current electrical stress, high temperature during nonoperating times (sterilization), and high vibration and shock loads. The capacitors must survive these severe environments without any degradation if reliable performance is to be achieved. A test program was established to evaluate both wet-slug tantalum and wet-foil capacitors under conditions accurately duplicating actual Viking applications. Test results of the electrical performance characteristics during extended periods of ripple current, the characteristics of the internal silver migration as a function of extended periods of ripple current, and the existence of any memory characteristics are presented.

Ward, C. M.↗