Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Mg I absorption features in the solar spectrum near 9 and 12 microns

High-resolution FTS observations from the Kitt Peak National Solar Observatory and the Spacelab 3 ATMOS experiment have revealed additional infrared transitions due to Mg I in the spectra of both quiet sun and sunspot penumbra. In contrast to previous observations, these transitions are seen in absorption, not emission. Absorption intensities range from 1 to 7 percent of the continuum in the quiet sun. In the penumbra, the same features appear to show Zeeman splitting. Modeling of the line profiles in the photospheric spectrum shows evidence for a factor of three overabundance in the n = 5 or more levels of Mg I in the upper photosphere, but with no deviations from a Planck source function. It is concluded that whatever the process that produces the emission (including the Lemke and Holweger mechanism), it must occur well above the tau(5000) = 0.01 level.

Glenar, David A.↗

Observations of the 12 micron Mg I lines in various solar features

Measurements of the solar Mg I line at 812/cm are presented, confirming the ubiquitous narrow emission from the quiet sun with secant limb brightening observed by Brault and Noyes (1983). It is found that the central intensity of 12-micron emission lines is greater in plages than in the quiet sun, with an equivalent width up to 3 times greater than for the quiet sun. The magnetic fields measured in plages range from 300 to 800 Gauss. The secant-like limb brightening, and line ratios suggest that the lines are optically thin and are formed in collisional equilibrium with Mg II in a thin layer just above the temperature minimum.

Zirin, Harold↗

Theoretical investigations of the structures and binding energies of Be(sub n) and Mg(sub n) (n = 3-5) clusters

Researchers determined the equilibrium geometries and binding energies of Be and Mg trimers, tetramers and pentamers using single and double excitation coupled cluster (CCSD) and complete active space self-consistent-field (CASSCF) multireference configuration interaction (MRCI) wave functions in conjunction with extended atomic basis sets. Best estimates of the cluster binding energies are 24, 83 and 110 kcal/mole for Be3, Be4 and Be5; and 9, 31 and 41 kcal/mole for Mg3, Mg4 and Mg5, respectively. A comparison of the MRCI and CCSD results shows that even the best single-reference approach (limited to single and double excitations) is not capable of quantitative accuracy in determining the binding energies of Be and Mg clusters.

Lee, Timothy J.↗

Line broadening of Mg X 609 and 625 A coronal emission lines observed above the solar limb

A University of Colorado sounding rocket experiment on March 17, 1988, provided high-resolution EUV spectra along a solar diameter and out to 1.2 solar radius with spatial resolution of 20 x 60 arcsec. Each spectrum contains transition region and coronal emission lines in the wavelength range 605-635 A and 1210-1270 A, including the emission lines Mg X 609 and 625 A, Fe XII 1242 A, O V 629 A, N V 1238 and 1242 A, corresponding to a wide range of temperatures of formation. Increased line broadening is observed above the limb for all lines, and this effect is illustrated by presenting observed line widths as a function of height above the limb for the higher temperature lines Mg X 609 and 625 A. On the basis of calculations, the most likely cause of the increased broadening above the limb appears to be the presence of hydromagnetic waves in the corona.

Hassler, Donald M.↗

Theoretical investigations of the structures and binding energies of Be(n) and Mg(n) (n = 3-5) clusters

The equilibrium geometries and binding energies of Be and Mg trimers, tetramers and pentamers have been determined using single and double excitation coupled cluster (CCSD) and complete active space self-consistent-field (CASSCF) multireference configuration interaction (MRCI) wave functions in conjunction with extended atomic basis sets. The best estimates of the cluster binding energies are 24, 83, and 110 kcal/mol for Be3, Be4, and Be5; and 9, 31, and 41 kcal/mol for Mg3, Mg4, and Mg5, respectively. A comparison of the MRCI and CCSD results shows that even the best single-reference approach (limited to single and double excitations) is not capable of quantitative accuracy in determining the binding energies of Be and Mg clusters.

Lee, Timothy J.↗

Effect of a prior stretch on the aging response of an Al-Cu-Li-Ag-Mg-Zr alloy

Recently, a family of Al-Cu-Li alloys containing minor amounts of Ag, Mg, and Zr and having desirable combinations of strength and toughness were developed. The Weldalite (trademark) alloys exhibit a unique characteristic in that with or without a prior stretch, they obtain significant strength-ductility combinations upon natural and artificial aging. The ultra-high strength (approximately 690 MPa yield strength) in the peak-aged tempers (T6 and T8) were primarily attributed to the extremely fine T(sub 1) (Al2CuLi) or T(sub 1)-type precipitates that occur in these alloys during artificial aging, whereas the significant natural aging response observed is attributed to strengthening from delta prime (Al3Li) and GP zones. In recent work, the aging behavior of an Al-Cu-Li-Ag-Mg alloy without a prior stretch was followed microstructurally from the T4 to the T6 condition. Commercial extrusions, rolled plates, and sheets of Al-Cu-Li alloys are typically subjected to a stretching operation before artificial aging to straighten the extrusions and, more importantly, introduce dislocations to simulate precipitation of strengthening phases such as T(sub 1) by providing relatively low-energy nucleation sites. The goals of this study are to examine the microstructure that evolves during aging of an alloy that was stretch after solution treatment and to compare the observations with those for the unstretched alloy.

Kumar, K. S.↗

The influence of Ag+Mg additions on the nucleation of strengthening precipitates in a non-cold-worked Al-Cu-Li alloy

Aluminum-copper-lithium alloys generally require cold work to attain their highest strengths in artificially aged tempers. These alloys are usually strengthened by a combination of the metastable delta prime (Al3Li) and theta prime (Al2Cu) phases and the equilibrium T sub 1 (Al2CuLi) phase, and where the T sub 1 phase is a more potent strengthener than the delta prime. Various investigators have shown that the high strengths obtained after artificial aging associated with cold work result from the heterogeneous precipitation of T sub 1 on matrix dislocations. The objective here is to elucidate the mechanism by which the Ag+Mg additions stimulate the precipitation of T sub 1 type precipitates without cold work. To accomplish this, the microstructure of an Al-6.3Cu-1.3Li-0.14Zr model alloy was evaluated in a T6 type temper with and without the Ag+Mg addition.

Source record↗

Observations of the 12.3 micron Mg I emission line during a major solar flare

The extremely Zeeman-sensitive 12.32 micron Mg I solar emission line was observed during a 3B/X5.7 solar flare on October 24, 1989. When compared to postflare values, Mg I emission-line intensity in the penumbral flare ribbon was 20 percent greater at the peak of the flare in soft X-rays, and the 12 micron continuum intensity was 7 percent greater. The flare also excited the emission line in the umbra where it is normally absent. The umbral flare emission exhibits a Zeeman splitting 200 G less than the adjacent penumbra, suggesting that it is excited at higher altitude. The absolute penumbral magnetic field strength did not change by more than 100 G between the flare peak and postflare period. However, a change in the inclination of the field lines, probably related to the formation and development of the flare loop system, was seen.

Deming, Drake↗

The shock wave equation of state of brucite Mg(OH)2

New shock equation of state (EOS) data on magnesium hydroxide between 12 and 60 GPa is presented. It is found that the brucite EOS data between 12 and 97 GPa can be fit with a single linear U(s) - u(p) relationship: U(s) = 4.76(0.11) + 1.35(0.05)u(p). The third order Birch-Murnaghan equation parameters are K(os) = 51 + or - 4 GPa and K(os)prime = 5.0 + or - 0.4. The first partial release states measured for brucite Mg(OH)2 are reported. Calculated phase boundaries using the EOS data are found to be consistent with the experimental data and indicate that brucite is unlikely to be stable under lower mantle conditions. At high pressure, bulk sound velocities calculated for MgO and Mg(OH)2 are very similar, indicating that the presence of hydrous assemblages in the lower mantle may not produce anomalous bulk seismic velocities. A comparison of densities in brucite and other high-pressure phases under mantle conditions shows that the water content of the lower mantle is between 0 and 3 wt pct.

Duffy, Thomas S.↗

Formation of the infrared emission lines of Mg I in the solar atmosphere

A non-LTE radiative transfer investigation of the emission lines is conducted at 7 and 12 microns using a realistic atomic model for neutral magnesium. An average quiet sun atmospheric model is used to calculate emission-line profiles that resemble the observed ones, i.e., broad absorption troughs with narrow central emission, and significant limb brightening. The charge exchange rates are found to be significant, but the effects of high-n coupling between Mg and Mg(+) together with radiative low-n transitions are of greater importance. It is confirmed that the emission cores are formed no higher than the temperature minimum region, and that the emission is caused by non-LTE effects rather than by the chromospheric temperature rise. It is inferred from the model calculations that the line core is sensitive to magnetic fields located almost 400 km above those measured in ordinary magnetograms; the gas pressure decreases 20-fold between these two heights.

Chang, E. S.↗

Mg(+)-ligand binding energies

Ab initio calculations are used to optimize the structures and determine the binding energies of Mg(+) to a series of ligands. Mg(+) bonds electrostatically with benzene, acetone, H2, CO, and NH3 and a self-consistent-field treatment gives a good description of the bonding. The bonding in MgCN(+) and MgCH3(+) is largely covalent and a correlated treatment is required.

Bauschlicher, Charles W., Jr.↗

Reflectance spectra of Fe(2+)-Mg(2+) disordered pyroxenes: Implications to remote-sensed spectra of planetary surfaces

The reflectance spectra of Fe(2+)-Mg(2+) disordered orthopyroxenes are relevant to surfaces of terrestrial planets onto which basaltic magma has been extruded. If cooling rates of basalt lava flows were fast, equilibrium iron intersite partitioning may not have been achieved so that abnormal enrichments of Fe(2+) ions in M1 sites would occur. The two intense pyroxene Fe(2+) site CF bands in the 1 micron and 2 micron regions would continue to dominate the the reflectance spectra so that the pyroxene composition and structure type would be readily identified in telescopic spectral profiles. However, abnormal intensification of the Fe(2+)/M1 site CF band at 1.20 microns could lead to the false identification of olivine in remote sensed spectra because in pyroxene-olivine mixtures the inflection around 1.20 microns is the only spectral feature for detecting the presence of olivine. The identification of iron-bearing plagioclase feldspars, too, would be obscured by the pyroxene Fe(2+)/M1 site CF band at 1.20 microns. Such interference would be a major problem if in situ reflectance spectra could be measured on the surface of Venus where ambient temperatures are as high as 475 C. Disordering of Fe(2+) and Mg(2+) ions comparable to that in the orthopyroxenes used in this spectral chemical study might be expected in low Ca pyroxenes occurring on the Venusian surface. Researchers conclude that Fe(2+)/M1 site spectral features need to be carefully assessed in remote-sensed spectra before deductions are made about the presence of olivine on planetary surfaces.

Burns, Roger G.↗

A theoretical study of the positive and dipositive ions of M(NH3)n and M(H2O)n for M = Mg, Ca, or Sr

The structure and binding energies are determined for many of the M(H2O)n(+) and M(H2O)n(2+) species, for n = 1-3 and M = Mg, Ca, or Sr. The trends are explained in terms of metal sp or sd-sigma hybridization and core polarization. The M(NH3)n(+) systems, with M = Mg or Sr, are also studied. For the positive ions, the low-lying excited states are also studied and compared with experiment. The calculations suggest an alternative interpretation of the SrNH3(+) spectrum.

Bauschlicher, Charles W., Jr.↗

The unusual field of the quasar 3C 336 - Identification of three foreground Mg II absorbing galaxies

Imaging and spectroscopic observations of the field of the QSO 3C 336 (z = 0.927), whose absorption spectrum exhibits at least three Mg II 2796, 2803-A absorption systems with z sub abs less than z sub em, making it the richest low-redshift absorption spectrum observed in a recently completed absorption line survey. The most intrinsically faint Mg II absorbing galaxy yet discovered is tentatively identified. With z equal to 0.472 and B greater than 24, its properties strongly resemble those of the so-called faint blue galaxies found in deep imaging and spectroscopic surveys for field galaxies. The implications of this very complex field for the general properties of galaxies producing heavy element absorption systems in the spectra of QSOs are discussed.

Steidel, Charles C.↗

The conductive propagation of nuclear flames. I - Degenerate C + O and O + Ne + Mg white dwarfs

The paper determines the physical properties - speed, width, and density structure - of conductive burning fronts in degenerate carbon-oxygen (C + O) and oxygen-neon-magnesium (O + Ne + Mg) compositions for a grid of initial densities and compositions. The dependence of the physical properties of the flame on the assumed values of nuclear reaction rates, the nuclear reaction network employed, the thermal conductivity, and the choice of coordinate system are investigated. The occurrence of accretion-induced collapse of a white dwarf is found to be critically dependent on the velocity of the nuclear conductive burning front and the growth rate of hydrodynamic instabilities. Treating the expanding area of the turbulent burning region as a fractal whose tile size is identical to the minimum unstable Rayleigh-Taylor wavelength, it is found, for all reasonable values of the fractal dimension, that for initial C + O or O + Ne + Mg densities above about 9 x 10 exp 9 g/cu cm the white dwarf should collapse to a neutron star.

Timmes, F. X.↗

Interstellar Mg II and C IV absorption by 1 1/2 galaxies along the sightline to MrK 205

The first results of our HST survey designed to search for Mg 2 and C 4 absorption lines from the disks and halos of low-redshift galaxies using background QSO's and supernovae as probes are presented. Our survey utilizes the high resolution of the Goddard High Resolution Spectrograph enabling us to calculate the column densities and doppler parameters of individual components within an absorption complex, and hence determine the physical conditions of the absorbing gas. Observing the complexity of the absorption line profiles i.e., the velocity distribution and total velocity extent of the constituent components, offers an important description of the kinematics of the absorbing gas, and hence an understanding of its origin. Focus is on one sight line in particular, that towards Mrk 205, which passes 3-5 kpc from the intervening galaxy NGC 4319. Mg 2 and C 4 absorption from both local Milky Way halo gas and from NGC 4319 is detected.

Bowen, David V.↗

Interstellar Mg II and C IV absorption toward Markarian 205 by NGC 4319 - An 'optically thick' QSO absorption system

We have used the Goddard High-Resolution Spectrograph aboard HST to detect interstellar Mg II and C IV absorption lines toward Mrk 205, a QSO whose sightline passes within 3/h kpc of the foreground galaxy NGC 4319. Absorption is detected from both local Milky Way gas and from NGC 4319, making this the first observation of an isolated, low-redshift galaxy causing an 'optically thick' QSO absorption system. We also observed for the first time Mg II absorption from two local High Velocity Clouds along this same sightline. The data support the premise that metal absorption lines seen at higher redshift in QSO spectra originate in gas associated with intervening galaxies. However, neither the strong absorption by (half) of our own Galaxy, nor the weak absorption by NGC 4319, may be typical of absorbers in general.

Bowen, David V.↗

The fracture resistance of 1420 and 1421 Al-Mg-Li alloys

The resistance to stable crack growth in 1420-T6 (Al-5Mg-2.1Li-0.1Zr-0.01Sc, less than 0.06Fe, in wt pct) and 1421-T6 (Al-4.7Mg-1.9Li-0.09Zr-0.2Sc, less than 0.06Fe) Al-Mg-Li alloys was investigated, based on the R curves generated in accordance with ASTM E561-86 and fractography analyses. The crack resistance of 1420 and 1421 alloys was found to be comparable to that of the conventional Space Shuttle External Tank Al alloy, 2219-T87. The main differences in the fracture behaviors arose from differences in the alloys' microstructures. In the case of 1420 alloy, a slightly enhanced toughness behavior was observed, due to the T-phase precipitates, which may have promoted more homogeneous deformation and enhanced microvoid coalescence. In the case of 1421 alloy, the addition of Sc led to a refined grain size and resulted in slightly reduced toughness.

Birt, M. J.↗