Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Fillers for improved graphite fiber retention by polymer matrix composites

The results of a program designed to determine the extent to which elemental boron and boron containing fillers added to the matrix resin of graphite/epoxy composites prevent the release of graphite fibers when the composites are exposed to fire and impact conditions are described. The fillers evaluated were boron, boron carbide and aluminum boride. The conditions evaluated were laboratory simulations of those that could exist in the event of an aircraft crash and burn situation. The baseline (i.e., unfilled) laminates evaluated were prepared from commercially available graphite/epoxy. The baseline and filled laminates' mechanical properties, before and after isothermal and humidity aging, also were compared. It was found that a small amount of graphite fiber was released from the baseline graphite/epoxy laminates during the burn and impact conditions used in this program. However, the extent to which the fibers were released is not considered a severe enough problem to preclude the use of graphite reinforced composites in civil aircraft structure. It also was found that the addition of boron and boron containing fillers to the resin matrix eliminated this fiber release. Mechanical properties of laminates containing the boron and boron containing fillers were lower than those of the baseline laminates. These property degradations for two systems: boron (5 micron) at 2.5 percent filler loading, and boron (5 micron) at 5.0 percent filler loading do not appear severe enough to preclude their use in structural composite applications.

House, E. E.↗
NASA NTRS1980

The viscoelastic behavior of the principal compliance matrix of a unidirectional graphite/epoxy composite

A testing program was conducted to determine the time-temperature response of the principal compliances of a unidirectional graphite/epoxy composite. It was shown that the two components of the compliance matrix are time and temperature independent. In addition, the compliance matrix is symmetric for the viscoelastic composite. The time-temperature superposition principle is used to determine shift factors. It was shown that the shift factors are independent of fiber orientation for fiber angles that vary from 10 to 90 deg with respect to the load direction.

Morris, D. H.↗
NASA NTRS1980

Acoustic transmission matrix of a variable area duct or nozzle carrying a compressible subsonic flow

The differential equations governing the propagation of sound in a variable area duct or nozzle carrying a one-dimensional subsonic compressible fluid flow are derived and put in state variable form using acoustic pressure and particle velocity as the state variables. The duct or nozzle is divided into a number of regions. The region size is selected so that in each region the Mach number can be assumed constant and the area variation can be approximated by an exponential area variation. Consequently, the state variable equation in each region has constant coefficients. The transmission matrix for each region is obtained by solving the constant coefficient acoustic state variable differential equation. The transmission matrix for the duct or nozzle is the product of the individual transmission matrices of each region. Solutions are presented for several geometries with and without mean flow.

Miles, J. H.↗
NASA NTRS1981

A spectroscopic study of intermediates in the condensation of refractory smokes - Matrix isolation experiments of SiO

The infrared and Raman spectra of N2 matrix-isolated silicon oxides were investigated. The vibrational frequencies of SiO, Si2O2, and Si3O3 were identified and assigned on the basis of normal coordinate analyses. Heating the solid to approximately 50 K (evaporating the matrix) leaves a residue whose infrared spectrum is identical to that of a smoke condensed at ambient temperatures. Further heating of the sample to approximately 500 K leads to significant changes in the band shapes. Investigations of the infrared spectra at several stages of the diffusion process enable a mechanism to be proposed for the transition from molecular properties to those of the residue (bulk) material, which has been characterized as Si2O3.

Khanna, R. K.↗
NASA NTRS1981

Matrix spectroscopic studies of chlorine atom-ozone reaction products

A spectroscopic study is presented of the matrix-isolated products of the direct combination reaction of chlorine atoms with ozone and of the microwave discharge reaction of chlorine and oxygen. Infrared spectra in the wavenumber range 2000 to 200 per cm were recorded for reaction products trapped by the condensation of a matrix of solid argon. Evidence for the formation of the ClO radical as well as the ClOO and ClClO radicals during the direct chlorine-ozone reaction is obtained, however no evidence is found for the presence of asymmetric ClO3 under conditions thought favorable for its formation. The ClO molecule is also observed following the microwave discharge reaction of chlorine and oxygen in argon in the isotopic forms (Cl-35)(O-16), (Cl-37)(O-16), (Cl-35)(O-18), and (Cl-37)(O-18). It is noted that the vibrational frequency for the (Cl-35)(O-16) radical at 849.2 per cm is blue-shifted 5 per cm above its gas-phase fundamental.

Carter, R. O., III↗
NASA NTRS1981

E-beam generated holographic masks for optical vector-matrix multiplication

An optical vector matrix multiplication scheme that encodes the matrix elements as a holographic mask consisting of linear diffraction gratings is proposed. The binary, chrome on glass masks are fabricated by e-beam lithography. This approach results in a fairly simple optical system that promises both large numerical range and high accuracy. A partitioned computer generated hologram mask was fabricated and tested. This hologram was diagonally separated outputs, compact facets and symmetry about the axis. The resultant diffraction pattern at the output plane is shown. Since the grating fringes are written at 45 deg relative to the facet boundaries, the many on-axis sidelobes from each output are seen to be diagonally separated from the adjacent output signals.

Arnold, S. M.↗
NASA NTRS1981

New kind of type 3 chondrite with a graphite-magnetite matrix

Four clasts in three ordinary-chondrite regolith breccias are discovered which are a new kind of type 3 chondrite. As with ordinary and carbonaceous type 3 chondrites, they have distinct chondrules, some of which contain glass, highly heterogeneous olivines and pyroxenes, and predominantly monoclinic low-Ca pyroxenes. Instead of the usual, fine-grained, Fe-rich silicate matrix, however, the clasts have a matrix composed largely of aggregates of micron- and submicron-sized graphite and magnetite. The bulk compositions of the clasts, as well as the types of chondrules (largely porphyritic), are characteristic of type 3 ordinary chondrites, although chondrules in the clasts are somewhat smaller (0.1-0.5 mm). A close relationship with ordinary chondrites is also suggested by the presence of similar graphite-magnetite aggregates in seven type 3 ordinary chondrites. It is thought that this new kind of chondrite is probably the source of the abundant graphite-magnetite inclusions in ordinary-chondrite regolith breccias and that it may be more common than indicated by the absence of whole meteorites made of chondrules and graphite-magnetite.

Scott, E. R. D.↗
NASA NTRS1981

Primitive ultrafine matrix in ordinary chondrites

Ultrafine matrix material has been concentrated by sieving and filtering disaggregated samples of six ordinary chondrites of different classes. This component(s), 'Holy Smoke' (HS), is enriched in both volatile, e.g. Na, K, Zn, Sb, and Pb, as well as refractory elements, e.g. W and REE; however, the element ratios vary greatly among the different chondrites. SEM studies show that HS contains fragile crystals, differing in composition, and apparently in gross disequilibrium not only among themselves but also with the major mineral phases and consequently thermodynamic equilibration did not occur. Thus HS must have originated from impacting bodies and/or was inherent in the 'primitive' regolith. Subsequent impact brecciation and reheating appears to have altered, to varying degrees, the original composition of this ultrafine matrix material. Recent 'cosmic dust' studies may indicate that HS still exists in the solar system. Survival of such delicate material must be considered in all theories for the origin of chondrites.

Rambaldi, E. R.↗
NASA NTRS1980

Significance of major and minor element variations in plagioclase in sodic ferrogabbro and breccia matrix in lunar highlands sample 67915

Attention is given to the significance of the results of a study of Ca, K, Ti, Fe, Mn, and Mg variations in plagioclase in highlands sample 67915,84. This polymict breccia from Outhouse Rock station 11 at the Apollo 16 site has been selected for study because it contains a wide variety of clast types, including a differentiated type-sodic ferrogabbro. It is found that the data on Ca, K, Ti, Fe, Mn, and Mg in plagioclase show no evidence of reaction between sodic ferrogabbro and breccia matrix clasts. Two groups of plagioclase compositions have been recognized in the breccia matrix. The data suggest that the prebreccia characteristics of plagioclase compositions have been preserved in 67915. Data on Mg/(Mg+FE) ratios suggest that the sodic ferrogabbro and the intermediate-Ca plagioclase clasts could be related to the Mg-rich plutonic rock suite and the high-Ca plagioclase clasts to the ferroan anorthosites.

Weiblen, P. W.↗
NASA NTRS1981

Wideband, high speed switch matrix development for SS-TDMA applications

The paper describes the design of an SS-TDMA microwave switch matrix being developed as part of the NASA 30/20 GHz Communications Satellite Program. A critical element in the systems development is the high-speed wideband switching capability necessary for 30/20 GHz SS-TDMA trunking service interconnections. A proof-of-concept model of a 20-by-20 microwave switch matrix with a 2.5 GHz bandwidth and 10-nanosecond switching speeds is being developed to realize this capability.

Prather, W. H.↗
NASA NTRS1983

On the resolvent condition in the Kreiss matrix theorem

The Kreiss Matrix Theorem asserts the uniform equivalence over all N x N matrices of power boundedness and a certain resolvent estimate. It is shown that the ratio of the constants in these two conditions grows linearly with N, and the optimal proportionality factor is obtained up to a factor of 2. Analogous results are also given for the related problem involving matrix exponentials. The proofs make use of a lemma that may be of independent interest, which bounds the arch length of the image of a circle in the complex plane under a rational function.

Leveque, R. J.↗
NASA NTRS1982

Spacecraft in switch matrix for wide band service applicatons in 30/20 GHz communications satellite systems

Bandwidth, switching speed, off-state isolation, and reliability over a ten-year mission were factors in determining the optimum available technology for satellite communications switching in 1982. A proof of concept model for a 20 x 20 coupled crossbar switch matrix designed with FET devices for microwave switching and with high speed CMOS LIS for switch crosspoint addressing was fabricated and tested. Results show the design is feasible for application in a multichannel SS-TDMA communications system. Expandibility can readily be achieved with this design. A conceptual design study for a 100 x 100 switch matrix utilizing a coupled crossbar architecture implemented with a monolithic microwave integrated circuits revealed technology needs for high capacity switch matrices.

Cory, B. J.↗
NASA NTRS1982

Development of a microwave 20 x 20 switch matrix for 30/20 GHz SS-TDMA application

The design and fabrication of a 3-8 GHz, 20 x 20 Satellite Switched-Time Division Multiple Access IF switch matrix applicable to a 30/20 GHz communications satellite are described. An assessment of switch architecture in 1980 concluded that the GaAs FET-based coupled crossbar switch matrix, incorporating high speed CMOS LSI logic for switch crosspoint addressing, would be the optimum technology available for communications satellite switching by 1982. This assessment was based on such factors as switching speed, bandwidth, off-state isolation, and reliability, over a 10-year mission life. A proof-of-concept model's construction and testing are presented.

Cory, B. J.↗
NASA NTRS1982

Application of matrix singular value properties for evaluating gain and phase margins of multiloop systems

A stability margin evaluation method in terms of simultaneous gain and phase changes in all loops of a multiloop system is presented. A universal gain-phase margin evaluation diagram is constructed by generalizing an existing method using matrix singular value properties. Using this diagram and computing the minimum singular value of the system return difference matrix over the operating frequency range, regions of guaranteed stability margins can be obtained. Singular values are computed for a wing flutter suppression and a drone lateral attitude control problem. The numerical results indicate that this method predicts quite conservative stability margins. In the second example if the eigenvalue magnitude is used instead of the singular value, as a measure of nearness to singularity, more realistic stability margins are obtained. However, this relaxed measure generally cannot guarantee global stability.

Mukhopadhyay, V.↗
NASA NTRS1983

A revised version of the transfer matrix method to analyze one-dimensional structures

A new and general method to analyze both free and forced vibration characteristics of one-dimensional structures is discussed in this paper. This scheme links for the first time the classical transfer matrix method with the recently developed integrating matrix technique to integrate systems of differential equations. Two alternative approaches to the problem are presented. The first is based upon the lumped parameter model to account for the inertia properties of the structure. The second releases that constraint allowing a more precise description of the physical system. The free vibration of a straight uniform beam under different support conditions is analyzed to test the accuracy of the two models. Finally some results for the free vibration of a 12th order system representing a curved, rotating beam prove that the present method is conveniently extended to more complicated structural dynamics problems.

Nitzsche, F.↗
NASA NTRS1984

Luneburg lens and optical matrix algebra research

Planar, as opposed to channelized, integrated optical circuits (IOCs) were stressed as the basis for computational devices. Both fully-parallel and systolic architectures are considered and the tradeoffs between the two device types are discussed. The Kalman filter approach is a most important computational method for many NASA problems. This approach to deriving a best-fit estimate for the state vector describing a large system leads to matrix sizes which are beyond the predicted capacities of planar IOCs. This problem is overcome by matrix partitioning, and several architectures for accomplishing this are described. The Luneburg lens work has involved development of lens design techniques, design of mask arrangements for producing lenses of desired shape, investigation of optical and chemical properties of arsenic trisulfide films, deposition of lenses both by thermal evaporation and by RF sputtering, optical testing of these lenses, modification of lens properties through ultraviolet irradiation, and comparison of measured lens properties with those expected from ray trace analyses.

Wood, V. E.↗
NASA NTRS1984

Systolic triple-matrix product calculations

In order to handle arbitrary-sized matrices with fixed-sized optical matrix processors, it is necessary to expand or contract the problem to fit the processor. This preprocessing is examined. It is applied to the type of triple-matrix product calculation needed for Kalman filtering. Emphasis will be placed on systolic-type processors.

Caulfield, H. J.↗
NASA NTRS1983

Influence of physical aging on the time-dependent properties of network epoxies and epoxy-matrix composites

The matrix-dominated properties of a network epoxy and its carbon fiber-reinforced composite are noted to be affected by sub-glass transition temperature T(g) annealing in a nitrogen atmosphere. The damping behavior, stress relaxation rate, and enthalpic state of the matrix material were found to decrease as functions of sub-T(g) annealing time. This time-dependent change in physical properties is explained on the basis of a free-volume collapse which is related to the recovery process of the nonequilibrium glassy network of the epoxy. The physical aging in network epoxies has been demonstrated to be thermoreversible. Aging kinetics are studied by means of differential scanning calorimetry, stress relaxation tests, dynamic mechanical analysis, and thermomechanical analysis.

Kong, E. S. W.↗