Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mass transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

NICER Discovery of Millisecond X-Ray Pulsations and an Ultracompact Orbit in IGR J17494-3030

We report the detection of 376.05 Hz (2.66 ms) coherent X-ray pulsations in NICER observations of a transient outburst of the low-mass X-ray binary IGR J17494−3030 in 2020 October/November. The system is an accreting millisecond X-ray pulsar in a 75-minute ultracompact binary. The mass donor is most likely a ≃0.02 Mꙩ finite-entropy white dwarf composed of He or C/O. The fractional rms pulsed amplitude is 7.4%, and the soft (1–3 keV) X-ray pulse profile contains a significant second harmonic. The pulsed amplitude and pulse phase lag (relative to our mean timing model) are energy dependent, each having a local maximum at 4 and 1.5 keV, respectively. We also recovered the X-ray pulsations in archival 2012 XMM-Newton observations, allowing us to measure a long-term pulsar spin-down rate of ύ= -2.1(7) x (10)^(-14) Hz/s and to infer a pulsar surface dipole magnetic field strength of ≃10^(9)G. We show that the mass transfer in the binary is likely nonconservative, and we discuss various scenarios for mass loss from the system.

Mason Ng↗
DOE OSTI2022

Kinetics and Reactor Modeling of VFA Ketonization for Sustainable Aviation Fuel Production

Ketonization of volatile fatty acids (VFAs) produced via arrested methanogenesis of wet waste represents the only unit operation of wet waste upgrading to sustainable (net-zero or negative life cycle CO2 emissions) aviation fuel not currently in industrial practice. Ketone product yields of close to 100% have been obtained during gas-phase reactions of VFAs over oxide catalysts at the laboratory scale, but design of an industrial ketonization reactor requires understanding of the impacts of reactant and product partial pressures, deactivation, and heat and mass transport phenomena on observed ketonization rates. Our work leverages rigorous kinetic analysis of ketonization processes to inform reactor scale-up efforts through packed-bed reactor modeling. We first present results of a kinetic study of ketonization of a model VFA, hexanoic acid, over an industrial ZrO2 catalyst performed in a packed-bed microreactor in conditions free of significant heat or mass transfer gradients. Major findings of the analysis include: (i) hexanoic acid saturates all catalyst active sites at relatively low partial pressure (~10 kPa) and (ii) ketonization products 6-undecanone, water, and CO2 inhibit reaction rates. Kinetic data are used to fit a rate expression quantifying the functional dependence of ketonization rate on partial pressures of VFA reactants and ketone, water, and CO2 products. A packed-bed reactor model describing vapor-phase hexanoic acid ketonization over ZrO2 extrudate catalysts is developed based on the kinetic model. The effects of (i) bed- and pellet-scale mass- and heat-transfer limitations and (ii) axial pressure drop guide our development of recommendations for optimal sizing, temperature, and influent flow composition of an industrial-scale ketonization reactor. The quantitative understanding of VFA ketonization developed in this study represents an advance toward derisking the VFA ketonization step of wet waste upgrading to sustainable aviation fuel.

biojet↗
DOE OSTI2020

Process intensification of CO 2 absorption using a 3D printed intensified packing device

In this study, we present a first of its kind demonstration of successful enhancement of CO 2 chemical absorption, under selected conditions, using a process intensification approach. A multifunctional device that integrates contact of phases and heat exchange has been developed, characterized, and tested. Heat transfer analysis has demonstrated the efficacy of the device as a heat exchanger, and mass transfer results have shown substantial improvement in the uptake of CO 2 under a range of operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A Critical Review of Fluoride Salt Heat Transfer

Interest in molten salts for next-generation nuclear reactors has given rise increasing design work over the last several years. Much of this builds off historic heat transfer experiments like those of the Molten Salt Reactor Program; yet, there is no comprehensive report covering experimental heat transfer in these fluids. This paper attempts to pull together all available reports on fluoride salt heat transfer to aid further research in this area. The data largely support the hypothesis that molten salt heat transfer will be easy to predict so long as salt properties are well known. Our work does not show any consistent indications of resistive films, entrained gases, or radiation heat transfer, but other unknowns are present. In addition to salt properties, these include unusual mass transfer and transition flow conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1975

On angular momentum transfer in binary systems

The maximum limit for the conversion of orbital angular momentum into rotational angular momentum of the mass-gaining component in a close binary system is derived. It is shown that this conversion process does not seriously affect the rate of orbital period change and can be neglected in computing the mass transfer rate. Integration of this limit over the entire accretion process results in a value for the maximum accumulated rotational angular momentum that is 3 to 4 times larger than that implied by the observed underluminosity of stars in such systems as Mu(1) Sco, V Pup, SX Aur, and V356 Sgr. It is suggested that shell stars and emission-line stars in binary systems may be produced when the core angular momentum is transferred into an envelope having a rotational angular momentum close to the maximum limit.-

Wilson, R. E.↗
DOE OSTI2020

Understanding solvent effects on adsorption and protonation in porous catalysts

Abstract Solvent selection is a pressing challenge in developing efficient and selective liquid phase catalytic processes, as predictive understanding of the solvent effect remains lacking. In this work, an attenuated total reflection infrared spectroscopy technique is developed to quantitatively measure adsorption isotherms on porous materials in solvent and decouple the thermodynamic contributions of van der Waals interactions within zeolite pore walls from those of pore-phase proton transfer. While both the pore diameter and the solvent identity dramatically impact the confinement (adsorption) step, the solvent identity plays a dominant role in proton-transfer. Combined computational and experimental investigations show increasingly favorable pore-phase proton transfer to pyridine in the order: water < acetonitrile < 1,4 – dioxane. Equilibrium methods unaffected by mass transfer limitations are outlined for quantitatively estimating fundamental thermodynamic values using statistical thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

EXOSAT guest observer program. Binary parameters of the X-ray Pulsar 4U1626-67

The pulsing X-ray source 4U1626-67 is an accreting neutron star in a binary system with a very low mass companion. The source was observed with EXOSAT continuously for 23 hr on 30 to 31 March 1986 UT. These observations allowed the setting of a stringent upper limit on the projected semimajor axis of the orbit of the neutron star of approx. 10 light msec for the 2485-s orbital period found by Middleditch et al., and a limit of approx. 13 light msec for any other plausible orbital period. The corresponding upper limit on the mass function for the 2485-s orbital period is 1.3 x 0.000001 solar mass. It was concluded that if the orbital inclination angle, i, equals 90 deg, then the optical companion star has a mass greater than 0.02 solar mass. However, it was found that a companion star mass greater than 0.06 solar mass is required if gravitational radiation is responsible for driving the mass transfer in this system. Only for i less than 16 deg can a companion star mass this large be accommodated by the limits set on the orbital amplitude. Also presented are results on the flaring activity in 4U1626-67 on time scales of approx. 1000 s, the energy dependent pulse profiles, and the pulse period history over the past decade.

Mcclintock, Jeffrey E.↗
NASA NTRS2015

Use of Generalized Fluid System Simulation Program (GFSSP) for Teaching and Performing Senior Design Projects at the Educational Institutions

This paper describes the experience of the authors in using the Generalized Fluid System Simulation Program (GFSSP) in teaching Design of Thermal Systems class at University of Alabama in Huntsville. GFSSP is a finite volume based thermo-fluid system network analysis code, developed at NASA/Marshall Space Flight Center, and is extensively used in NASA, Department of Defense, and aerospace industries for propulsion system design, analysis, and performance evaluation. The educational version of GFSSP is freely available to all US higher education institutions. The main purpose of the paper is to illustrate the utilization of this user-friendly code for the thermal systems design and fluid engineering courses and to encourage the instructors to utilize the code for the class assignments as well as senior design projects. The need for a generalized computer program for thermofluid analysis in a flow network has been felt for a long time in aerospace industries. Designers of thermofluid systems often need to know pressures, temperatures, flow rates, concentrations, and heat transfer rates at different parts of a flow circuit for steady state or transient conditions. Such applications occur in propulsion systems for tank pressurization, internal flow analysis of rocket engine turbopumps, chilldown of cryogenic tanks and transfer lines, and many other applications of gas-liquid systems involving fluid transients and conjugate heat and mass transfer. Computer resource requirements to perform time-dependent, three-dimensional Navier-Stokes computational fluid dynamic (CFD) analysis of such systems are prohibitive and therefore are not practical. Available commercial codes are generally suitable for steady state, single-phase incompressible flow. Because of the proprietary nature of such codes, it is not possible to extend their capability to satisfy the above-mentioned needs. Therefore, the Generalized Fluid System Simulation Program (GFSSP1) has been developed at NASA Marshall Space Flight Center (MSFC) as a general fluid flow system solver capable of handling phase changes, compressibility, mixture thermodynamics and transient operations. It also includes the capability to model external body forces such as gravity and centrifugal effects in a complex flow network. The objectives of GFSSP development are: a) to develop a robust and efficient numerical algorithm to solve a system of equations describing a flow network containing phase changes, mixing, and rotation; and b) to implement the algorithm in a structured, easy-to-use computer program. The analysis of thermofluid dynamics in a complex network requires resolution of the system into fluid nodes and branches, and solid nodes and conductors as shown in Figure 1. Figure 1 shows a schematic and GFSSP flow circuit of a counter-flow heat exchanger. Hot nitrogen gas is flowing through a pipe, colder nitrogen is flowing counter to the hot stream in the annulus pipe and heat transfer occurs through metal tubes. The problem considered is to calculate flowrates and temperature distributions in both streams. GFSSP has a unique data structure, as shown in Figure 2, that allows constructing all possible arrangements of a flow network with no limit on the number of elements. The elements of a flow network are boundary nodes where pressure and temperature are specified, internal nodes where pressure and temperature are calculated, and branches where flowrates are calculated. For conjugate heat transfer problems, there are three additional elements: solid node, ambient node, and conductor. The solid and fluid nodes are connected with solid-fluid conductors. GFSSP solves the conservation equations of mass and energy, and equation of state in internal nodes to calculate pressure, temperature and resident mass. The momentum conservation equation is solved in branches to calculate flowrate. It also solves for energy conservation equations to calculate temperatures of solid nodes. The equations are coupled and nonlinear; therefore, they are solved by an iterative numerical scheme. GFSSP employs a unique numerical scheme known as simultaneous adjustment with successive substitution (SASS), which is a combination of Newton-Raphson and successive substitution methods. The mass and momentum conservation equations and the equation of state are solved by the Newton-Raphson method while the conservation of energy and species are solved by the successive substitution method. GFSSP is linked with two thermodynamic property programs, GASP2 and WASP3 and GASPAK4, that provide thermodynamic and thermophysical properties of selected fluids. Both programs cover a range of pressure and temperature that allows fluid properties to be evaluated for liquid, liquid-vapor (saturation), and vapor region. GASP and WASP provide properties of 12 fluids. GASPAK includes a library of 36 fluids. GFSSP has three major parts. The first part is the graphical user interface (GUI), visual thermofluid analyzer of systems and components (VTASC). VTASC allows users to create a flow circuit by a 'point and click' paradigm. It creates the GFSSP input file after the completion of the model building process. GFSSP's GUI provides the users a platform to build and run their models. It also allows post-processing of results. The network flow circuit is first built using three basic elements: boundary node, internal node, and branch.

Majumdar, A. K.↗
NASA NTRS1986

Heat transfer in the tip region of a rotor blade simulator

In gas turbines, the blades of axial turbine stages rotate in close proximity to a stationary peripheral wall. Differential expansion of the turbine wheel, blades, and the shroud causes variations in the size of the clearance gap between blade tip and stationary shroud. The necessity to tolerate this differential thermal expansion dictates that the clearance gap cannot be eliminated altogether, despite accurate engine machining. Pressure differences between the pressure and suction sides of a blade drives a flow through the clearance gap. This flow, the tip leakage flow, is detrimental to engine performance. The primary detrimental effect of tip leakage flow is the reduction of turbine stage efficiency, and a second is the convective heat transfer associated with the flow. The surface area at the blade tip in contact with the hot working gas represents an additional thermal loading on the blade which, together with heat transfer to the suction and pressure side surface area, must be removed by the blade internal cooling flows. Experimental results concerned with the local heat transfer characteristics on all surfaces of shrouded, rectangular cavities are reported. A brief discussion of the mass transfer system used is given.

Chyu, M. K.↗
NASA NTRS2000

Radiation Heat Transfer Procedures for Space-Related Applications

Over the last contract year, a numerical procedure for combined conduction-radiation heat transfer using unstructured grids has been developed. As a result of this research, one paper has been published in the Numerical Heat Transfer Journal. One paper has been accepted for presentation at the International Center for Heat and Mass Transfer's International Symposium on Computational Heat Transfer to be held in Australia next year. A journal paper is under review by my NASA's contact. A conference paper for the ASME National Heat Transfer conference is under preparation. In summary, a total of four (4) papers (two journal and two conference) have been published, accepted or are under preparation. There are two (2) to three (3) more papers to be written for the project. In addition to the above publications, one book chapter, one journal paper and six conference papers have been published as a result of this project. Over the last contract year, the research project resulted in one Ph.D. thesis and partially supported another Ph.D. student. My NASA contact and myself have formulated radiation heat transfer procedures for materials with different indices of refraction and for combined conduction-radiation heat transfer. We are trying to find other applications for the procedures developed under this grant.

Chai, John C.↗
DOE OSTI2023

A hydride model for solid and liquid cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a rough surface or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle. Two models are developed to capture the heat and mass transfer that occurs during this process. One model assumes that for larger solid ejecta particles, the loss of mass is negligible while for smaller liquid ejecta particles, the loss of mass during reaction is accounted for. The loss of mass is assumed to occur from the hydride layer being extremely brittle and the fact that it will be relatively easy for the hydride material on the outside of the particle to go into tension, crack and flake off. The model is tested by performing simulations similar to the original experiments that motivated the development of these models and comparing the particle temperatures. While the model is able to capture some general features of the flowfield, inaccuracies clearly exist that must be addressed and the results underscore the need for more isolated experiments where fewer assumptions and physical processes are present simultaneously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

The hot halo subdwarf binary system HZ-22

A new investigation of the hot subdwarf component of the binary system known as HZ-22 has been conducted using more sophisticated detection apparatus than was available to the original investigators in 1972. The results indicate that the star is tidally distorted, that its companion is most likely to be a white dwarf, and that no significant mass transfer is currently taking place. The importance of the system now shifts to the possibility that the internal mass distribution of a highly evolved subdwarf may be determinable by observing its response to a known tidal potential.

Young, A.↗
NASA NTRS1988

Is supernova 1987A a stripped asymptotic-branch giant in a binary system?

It is proposed that the progenitor of supernova 1987A was a previously undetected red star in orbit about a blue supergiant. The progenitor was the remnant of an asymptotic-branch giant that had lost most of its hydrogen-rich envelope to its blue companion by type C mass transfer. A detailed evolutionary model strongly supports the feasibility of this proposition. It is found that the original mass of the supernova precursor was 10-15 solar (unless a large fraction of the mass was ejected from the binary sytem), and its final mass, just before the supernova event, was 3-6 solar. The system remained bound, with a new orbital period of 3-10 yr and an eccentricity of 0.1-0.4. This picture can provide plausible qualitative explanations for several anomalies in the observational properties of this supernova.

Joss, P. C.↗
NASA NTRS1991

Accretion disks in interacting binary stars

Accretion disks have most often been analyzed in cataclysmic variables (CVs); the structure and evolution of accretion disks is defined by angular momentum transfer processes. Detailed atmospheric models indicate that angular momentum transport is efficient, that CV outbursts are regulated by mass transfer variations in the disk, and that they may be initiated either from the inner and outer regions of the disk. Tidal effects on the companion are noted to be capable of inducing a significant departure from Keplerian flow near the outer region of the disk.

Lin, D. N. C.↗
NASA NTRS1988

Local heat/mass transfer distributions around sharp 180 deg turns in two-pass smooth and rib-roughened channels

The napthalene sublimation technique was employed to study the detailed mass transfer distributions around the sharp 180 deg turns in a two-pass, square, smooth channel and in an identical channel with two rib-roughened opposite walls. Experiments conducted for Reynolds numbers of 15,000, 30,000, and 60,000 indicate that the Sherwood numbers on the top, outer, and inner walls around the turn in the rib-roughened channel are higher than the corresponding Sherwood numbers around the turn in the smooth channel. Sherwood numbers after the sharp turn are found to be higher than those before the turn for both the smooth and the ribbed channels.

Han, J. C.↗
DOE OSTI2025

Multiphase computational fluid dynamics modeling of reacting flows in absorption columns for carbon capture

First-principles derived computational fluid dynamics (CFD) simulations have been proposed as a fundamental tool for investigating solvent-based CO 2 absorption in packed columns due to their ability to accurately represent the underlying nonlinear, multiscale dynamics. Numerous studies have previously utilized such CFD simulations to investigate hydrodynamics of columns with structured and random packings by assessing the key hydrodynamic metrics such as the interfacial and wetted areas. While mapping such metrics for different conditions is essential to the optimization of absorption columns, it is not sufficient, as the CO 2 capture rate depends also on the coupled, nonlinear dynamics from the underlying chemical reaction kinetics, thermodynamics, and heat-transfer rates. In this work, we present detailed CFD simulation results augmented by incorporating the effects of interfacial physical mass transfer of CO 2 , heat release from chemical reaction kinetics, and thermophysical property variations from resulting temperature gradients. We demonstrate the applicability of the proposed approach in numerically assessing the performance of packed columns by evaluating key hydrodynamic quantities, CO 2 absorption rates, and temperature rise in a reference column with packings that are structurally similar to the Sulzer Mellapak™ 250.Y packing, for different solvent inflow velocities and temperatures. Predictions from simulation results are found to be consistent with the trends in experimental observations from the literature, suggesting that the predictive capabilities of the simulation framework can be leveraged to guide the future development of absorber-column designs and optimized process flowsheets.

Absorption columns↗
NASA NTRS1982

Advances in cryogenic engineering. Volume 27 - Proceedings of the Cryogenic Engineering Conference, San Diego, CA, August 11-14, 1981

Applications of superconductivity are considered, taking into account MHD and fusion, generators, transformers, transmission lines, magnets for physics, cryogenic techniques, electrtronics, and aspects of magnet stability. Advances related to heat transfer in He I are discussed along with subjects related to theat transfer in He II, refrigeration of superconducting systems, refrigeration and liquefaction, dilution and magnetic refrigerators, refrigerators for space applications, mass transfer and flow phenomena, and the properties of fluids. Developments related to cryogenic applications are also explored, giving attention to bulk storage and transfer of cryogenic fluids, liquefied natural gas operations, space science and technology, and cryopumping. Topics related to cryogenic instrumentation and controls include the production and use of high grade silicon diode temperature sensors, the choice of strain gages for use in a large superconducting alternator, microprocessor control of cryogenic pressure, and instrumentation, data acquisition and reduction for a large spaceborne helium dewar.

Fast, R. W.↗