Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOSFETs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Influence of Nitrogen Gas Flow Rate on the Electrical Behavior of an Atmospheric Pressure Dielectric Barrier Jet Discharge

The dielectric barrier discharge configuration used consists of a hemispherical electrode insulated by 1 mm thick borosilicate glass and a grounded plate with a hole through which the jet is formed externally in the surrounding air. The effect of gas flow rate on the behavior of an atmospheric pressure dielectric barrier jet discharge was studied for different air-gap distance and drive voltage, V{sub DD}, to the MOSFET. It is found that at higher rate of nitrogen gas flow, the current spikes reduce in number when the driving voltage and air-gap distance are kept constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of high-voltage pulse-slicer unit with variable pulse duration for pulse radiolysis system

A high-voltage pulse-slicer unit with variable pulse duration has been developed and integrated with a 7 MeV linear electron accelerator (LINAC) for pulse radiolysis investigation. The pulse-slicer unit provides switching voltage from 1 kV to 10 kV with rise time better than 5 ns. Two MOSFET based 10 kV switches were configured in differential mode to get variable duration pulses. The high-voltage pulse has been applied to the deflecting plates of the LINAC for slicing of electron beam of 2 {mu}s duration. The duration of the electron beam has been varied from 30 ns to 2 {mu}s with the optimized pulse amplitude of 7 kV to get corresponding radiation doses from 6 Gy to 167 Gy.

43 PARTICLE ACCELERATORS↗

Evaluation of pelletron accelerator facility to study radiation effects on semiconductor devices

In this paper we present the comprehensive results on the effects of different radiation on the electrical characteristics of different semiconductor devices like Si BJT, n-channel MOSFETs, 50 GHz and 200 GHz silicon-germanium heterojunction bipolar transistor (SiGe HBTs). The total dose effects of different radiation are compared in the same total dose ranging from 100 krad to 100 Mrad. We show that the irradiation time needed to reach very high total dose can be reduced by using Pelletron accelerator facilities instead of conventional irradiation facilities.

36 MATERIALS SCIENCE↗

Plasma immersion ion implantation for sub-22 nm node devices: FD-SOI and Tri-Gate

Here, we present and discuss the electrical characteristics of fully depleted MOSFET transistors of planar and tridimensional architecture, doped by Plasma Immersion Ion Implantation (PIII) or Beam Line Ion Implantation (BLII). Both techniques delivered similar and satisfactory results in considering the planar architecture. For tri-dimensional Tri-Gate transistors, the results obtained with PIII are superior.

36 MATERIALS SCIENCE↗

Maskless implants of 20 keV Ga{sup +} in thin crystalline silicon on insulator

A nano-sized ion beam apparatus has been used as maskless lithography to implant 20 keV Ga{sup +} ions into a 26 nm thick silicon crystalline film on insulator. The ion beam, with about 5 nm standard deviation, delivered few hundred ions during a single shot. Circular areas with nominal diameter of 20 or 50 nm were irradiated to a fluence of 5 Multiplication-Sign 10{sup 14}/cm{sup 2}. Transmission electron microscopy evidenced that the damaged regions are characterized by an irregular contour with many disordered filaments. Damage extends across the layer thickness and fast Fourier transform analysis indicates that implantation causes the amorphization of a region which extends beyond the nominal diameter. In situ annealing experiments demonstrated that the disordered filamentary regions disappear in the 250-450 Degree-Sign C temperature range and the interfaces with the surrounding crystalline regions sharpen. A temperature as high as 600 Degree-Sign C is required to fully re-crystallize the amorphous core of the implanted dots. Reordering occurs by multi-orientation lateral solid-phase epitaxial growth and the breaking of (111) and (101) interfaces, due to the formation of twins, triggers a fast crystallization kinetics. Rapid thermal annealing (890 Degree-Sign C-10 s) completely crystallizes the amorphous regions, twins are absent and small cluster of defects remains instead. Preliminary scanning capacitance measurements indicate that the implanted atoms, after crystallization, are electrically active. The implant method is then a viable processing step for the doping of non-bulk fully depleted ultra-thin-body MOSFET.

36 MATERIALS SCIENCE↗

Design and validation of a high-voltage levitation circuit for electrostatic accelerometers

A simple high-voltage circuit with a voltage range of 0 to 900 V and an open-loop bandwidth of 11 kHz is realized by using an operational amplifier and a MOSFET combination. The circuit is used for the levitation of a test mass of 71 g, suspended below the top-electrodes with a gap distance of 57 μm, so that the performance of an electrostatic accelerometer can be tested on the ground. The translation noise of the accelerometer, limited by seismic noise, is about 4 × 10{sup −8} m/s{sup 2}/Hz{sup 1/2} at 0.1 Hz, while the high-voltage coupling noise is one-order of magnitude lower.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Negative differential resistance and effect of defects and deformations in MoS{sub 2} armchair nanoribbon metal-oxide-semiconductor field effect transistor

In this work, we present a study on the negative differential resistance (NDR) behavior and the impact of various deformations (like ripple, twist, wrap) and defects like vacancies and edge roughness on the electronic properties of short-channel MoS{sub 2} armchair nanoribbon MOSFETs. The effect of deformation (3°–7° twist or wrap and 0.3–0.7 Å ripple amplitude) and defects on a 10 nm MoS2 ANR FET is evaluated by the density functional tight binding theory and the non-equilibrium Green's function approach. We study the channel density of states, transmission spectra, and the I{sub D}–V{sub D} characteristics of such devices under the varying conditions, with focus on the NDR behavior. Our results show significant change in the NDR peak to valley ratio and the NDR window with such minor intrinsic deformations, especially with the ripple.

36 MATERIALS SCIENCE↗

Computational study on electrical properties of transition metal dichalcogenide field-effect transistors with strained channel

The performance limits of monolayer transition metal dichalcogenide (TMDC) field-effect transistors (FETs) with isotropic biaxial strain were examined with the “top-of-the-barrier” ballistic MOSFET model. Using a first-principle theory, we calculated the band structures and density of states of strained monolayer MoS{sub 2} and WS{sub 2}, and used the results in model calculations. Introducing strain moves the positions of the conduction band minimum and valence band maximum in k-space with resultant variation in the effective mass and population of carriers. Introducing 2% tensile strain into n-type MoS{sub 2} FETs decreases the electron effective mass and, at the same time, increases energy separation between the lower and the higher valleys in the conduction band, resulting in 26% improvement of the ON current up to 1260 A/m. Whereas compressive strain results in complicated effects, −2% strain also improves the ON current by 15%. These results suggest that introducing artificial strain is promising to improve TMDC FET performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, defects, and strain in silicon-silicon oxide interfaces

The structure of the interfaces between silicon and silicon-oxide is responsible for proper functioning of MOSFET devices while defects in the interface can deteriorate this function and lead to their failure. In this paper we modeled this interface and characterized its defects and strain. MD simulations were used for reconstructing interfaces into a thermodynamically stable configuration. In all modeled interfaces, defects were found in the form of three-coordinated silicon atom, five coordinated silicon atom, threefold-coordinated oxygen atom, or displaced oxygen atom. Three-coordinated oxygen atom can be created if dangling bonds on silicon are close enough. The structure and stability of three-coordinated silicon atoms (P{sub b} defect) depend on the charge as well as on the electric field across the interface. The negatively charged P{sub b} defect is the most stable one, but the electric field resulting from the interface reduces that stability. Interfaces with large differences in periodic constants of silicon and silicon oxide can be stabilized by buckling of silicon layer. The mechanical stress resulted from the interface between silicon and silicon oxide is greater in the silicon oxide layer. Ab initio modeling of clusters representing silicon and silicon oxide shows about three time larger susceptibility to strain in silicon oxide than in silicon if exposed to the same deformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum dot based memory devices: Current status and future prospect by simulation perspective

We discuss the simulation of floating gate MOSFET memory performance consists of Si/Ge/Si quantum dots for electronics storage nodes with higk-κ material as the tunnel oxide. Heterostructure quantum dot was proposed to maintain the good memory performance without losing the long retention characteristic. As the results, retention time could be increase significantly without deteriorating the writing/erasing speed. By selected the dot size of 9–15nm and the tunnel oxide thickness of 2nm, the retention characteristic can reach up to 10{sup 9}s while the writing and erasing time at the order of 10{sup −6}s. By replace the SiO{sub 2} tunnel oxide with high-κ material such as HfO{sub 2}, ZrO{sub 2}, and Y{sub 2}O{sub 3} the leakage current due to the shrinkage of tunnel oxide thickness can be suppressed by the factor of 10 for the EOT lower than ∼1nm. Moreover, the charge-trapping that generated by the defect at Si substrate and higk-κ material interface are fully considered. We found that, the charge-trapping affects the retention time and memory operation performance. By increasing the charge-trapping depth and width, the memory operation time decrease significantly while the retention characteristic slightly improved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trend of tunnel magnetoresistance and variation in threshold voltage for keeping data load robustness of metal–oxide–semiconductor/magnetic tunnel junction hybrid latches

The robustness of data load of metal–oxide–semiconductor/magnetic tunnel junction (MOS/MTJ) hybrid latches at power-on is examined by using Monte Carlo simulation with the variations in magnetoresistances for MTJs and in threshold voltages for MOSFETs involved in 90 nm technology node. Three differential pair type spin-transfer-torque-magnetic random access memory cells (4T2MTJ, 6T2MTJ, and 8T2MTJ) are compared for their successful data load at power-on. It is found that the 4T2MTJ cell has the largest pass area in the shmoo plot in TMR ratio (tunnel magnetoresistance ratio) and V{sub dd} in which a whole 256 kb cell array can be powered-on successfully. The minimum TMR ratio for the 4T2MTJ in 0.9 V < V{sub dd} < 1.9 V is 140%, while the 6T2MTJ and the 8T2MTJ cells require TMR ratio larger than 170%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaAs tunnel diodes for the calibration of semi-classical and quantum mechanical band-to-band tunneling models

Promising predictions are made for III-V tunnel-field-effect transistor (FET), but there is still uncertainty on the parameters used in the band-to-band tunneling models. Therefore, two simulators are calibrated in this paper; the first one uses a semi-classical tunneling model based on Kane's formalism, and the second one is a quantum mechanical simulator implemented with an envelope function formalism. The calibration is done for In{sub 0.53}Ga{sub 0.47}As using several p+/intrinsic/n+ diodes with different intrinsic region thicknesses. The dopant profile is determined by SIMS and capacitance-voltage measurements. Error bars are used based on statistical and systematic uncertainties in the measurement techniques. The obtained parameters are in close agreement with theoretically predicted values and validate the semi-classical and quantum mechanical models. Finally, the models are applied to predict the input characteristics of In{sub 0.53}Ga{sub 0.47}As n- and p-lineTFET, with the n-lineTFET showing competitive performance compared to MOSFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic characterization of SAM coatings as gate insulators in Si-based FET devices

Many nano-material systems are currently under consideration as possible candidates for gate dielectric insulators in both metal-oxide-semiconductor (MOSFET) and organic (OFET) field-effect transistors. In this contribution, the possibility of employing self-assembled monolayers (SAMs) of hydroxylated octadecyltrichlorosilane (OTS) chains on a (111) Si substrate as gate dielectrics is discussed; in particular ab initio theoretical simulations have been employed to study the structural properties, work function modifications, and the insulating properties of OTS thin film coatings on Si substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Air stable n-doping of WSe{sub 2} by silicon nitride thin films with tunable fixed charge density

Stable n-doping of WSe{sub 2} using thin films of SiN{sub x} deposited on the surface via plasma-enhanced chemical vapor deposition is presented. Positive fixed charge centers inside SiN{sub x} act to dope WSe{sub 2} thin flakes n-type via field-induced effect. The electron concentration in WSe{sub 2} can be well controlled up to the degenerate limit by simply adjusting the stoichiometry of the SiN{sub x} through deposition process parameters. For the high doping limit, the Schottky barrier width at the metal/WSe{sub 2} junction is significantly thinned, allowing for efficient electron injection via tunneling. Using this doping scheme, we demonstrate air-stable WSe{sub 2} n-MOSFETs with a mobility of ∼70 cm{sup 2}/V s.

36 MATERIALS SCIENCE↗

New insights into self-heating in double-gate transistors by solving Boltzmann transport equations

Electro-thermal effects become one of the most critical issues for continuing the downscaling of electron devices. To study this problem, a new efficient self-consistent electron-phonon transport model has been developed. Our model of phonon Boltzmann transport equation (pBTE) includes the decay of optical phonons into acoustic modes and a generation term given by electron-Monte Carlo simulation. The solution of pBTE uses an analytic phonon dispersion and the relaxation time approximation for acoustic and optical phonons. This coupled simulation is applied to investigate the self-heating effects in a 20 nm-long double gate MOSFET. The temperature profile per mode and the comparison between Fourier temperature and the effective temperature are discussed. Some significant differences occur mainly in the hot spot region. It is shown that under the influence of self-heating effects, the potential profile is modified and both the drain current and the electron ballisticity are reduced because of enhanced electron-phonon scattering rates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Externally driven global Alfvén eigenmodes applied for effective mass number measurement on TCABR

The excitation and detection of Global Alfvén Eigenmodes on TCABR for diagnostic purposes are presented. The modes can be excited with one or two in-vessel antennae, with up to 15 A of current in each, in the frequency range from 2 to 4 MHz. This scheme allows the estimation of the effective mass number at the plasma center, which value is affected by impurity concentration in the core. An amplifier based on MOSFETs is used to excite the waves driven by low power, in order to not change the basic plasma parameters. The variation of the GAE with density is verified and the location of the mode resonance at the plasma center is confirmed by the sawtooth beating, so that the correspondingly beating phase inversion improves the precision on the resonant condition determination. The toroidal parity of the modes N = 1,2 is determined by use of two opposite located antennae with different phase of the RF current. Knowledge of toroidal mode number is important as it identifies GAE location and defines the estimated effective mass value. The estimated value for A{sub eff} is ∼1.4–1.5, corresponding to 5–7% of carbon impurity concentration. The measured value of A{sub eff} is used to estimate Z{sub eff}, which is compared to older TCA experiments and the value obtained by the Spitzer conductivity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interfacial bonding and electronic structure of GaN/GaAs interface: A first-principles study

Understanding of GaN interfacing with GaAs is crucial for GaN to be an effective interfacial layer between high-k oxides and III-V materials with the application in high-mobility metal-oxide-semiconductor field effect transistor (MOSFET) devices. Utilizing first principles calculations, here, we investigate the structural and electronic properties of the GaN/GaAs interface with respect to the interfacial nitrogen contents. The decrease of interfacial N contents leads to more Ga dangling bonds and As-As dimers. At the N-rich limit, the interface with N concentration of 87.5% shows the most stability. Furthermore, a strong band offsets dependence on the interfacial N concentration is also observed. The valance band offset of N7 with hybrid functional calculation is 0.51 eV. The electronic structure analysis shows that significant interface states exist in all the GaN/GaAs models with various N contents, which originate from the interfacial dangling bonds and some unsaturated Ga and N atoms. These large amounts of gap states result in Fermi level pinning and essentially degrade the device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-charge transport in ambipolar silicon nanoscale field-effect transistors

We report single-charge transport in ambipolar nanoscale MOSFETs, electrostatically defined in near-intrinsic silicon. We use the ambipolarity to demonstrate the confinement of either a few electrons or a few holes in exactly the same crystalline environment underneath a gate electrode. We find similar electron and hole quantum dot properties while the mobilities differ quantitatively like in microscale devices. The understanding and control of individual electrons and holes are essential for spin-based quantum information processing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗