Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Mass–metallicity relation for local analogs of high-redshift galaxies: implications for the evolution of the mass–metallicity relations

We revisit the evolution of the mass–metallicity relation of low- and high-redshift galaxies by using a sample of local analogs of high-redshift galaxies. These analogs share the same location of the UV-selected star-forming galaxies at z∼2 on the [O iii]λ5007/Hβ versus [N ii]λ6584/Hα nebular emission-line diagnostic (or BPT) diagram. Their physical properties closely resemble those in z∼2 UV-selected star-forming galaxies being characterized, in particular, by high ionization parameters (logq≈7.9) and high electron densities (n{sub e}≈100 cm{sup −3}). With the full set of well-detected rest-frame optical diagnostic lines, we measure the gas-phase oxygen abundance in the SDSS galaxies and these local analogs using the empirical relations and the photoionization models. We find that the metallicity difference between the SDSS galaxies and our local analogs in the 8.5<log(M{sub ∗}/M{sub ⊙})<9.0 stellar mass bin varies from −0.09 to 0.39 dex, depending on strong-line metallicity measurement methods. Due to this discrepancy, the evolution of mass–metallicity should be used to compare with the cosmological simulations with caution. We use the [S ii]/Hα and [O i]/Hα BPT diagram to reduce the potential AGN and shock contamination in our local analogs. We find that the AGN/shock influences are negligible on the metallicity estimation.

79 ASTRONOMY AND ASTROPHYSICS↗

Two new organic-inorganic hybrid compounds based on metal-pyrazine coordination polymers and Keggin polyoxometalates: effect of metal ions on the structure

Through changing the metal ions, two Keggin polyoxometalates-based hybrid compounds, [Cu{sub 5}(pz){sub 6}(Cl)(SiW{sub 12}O{sub 40})] (1) and [Ag{sub 4}(pz){sub 3}(H{sub 2}O){sub 2}(SiW{sub 12}O{sub 40})] (2) (pz=pyrazine), were hydrothermally synthesized and characterized by an elemental analysis, IR spectroscopy, thermogravimetric analyses, and single X-ray diffraction. In compound 1, the metal-organic motif exhibits a 6{sup 3} topological 2-D sheet, which is further fused by the [SiW{sub 12}O{sub 40}]{sup 4-} anions to construct a (6.7.8)(6{sup 3}.7.8{sup 2})(6{sup 3})(6{sup 5}.7)(6{sup 5}.8) topological 3D structure. In compound 2, the bridging groups Ag{sub 2}(pz) connect the [SiW{sub 12}O{sub 40}]{sup 4-} anions to form a (5{sup 3}){sub 2}(5{sup 4}.8{sup 2}) topological 2-D layer, which is further linked by an [Ag(pz)]{sub n}{sup n+} chains to construct a 3D structure with the (3{sup 4}.4{sup 16}.5{sup 24}.6{sup 12}.7{sup 8}.8{sup 2})(3{sup 4}.4{sup 6}.5{sup 4}.6){sub 2}(4.5{sup 2}){sub 2} topology. It represents the highest connected network topology presently known for the polyoxometalates system. The structure differences of compounds 1 and 2 reveal that the coordination numbers and geometries of the metal ions have a great influence on the final structure and topology of the Keggin POMs-based hybrid compounds. In addition, the electrochemistry properties of the two compounds have been studied. -- Graphical Abstract: Two new highly connected Keggin POMs-based hybrids have been synthesized by changing metal ions under hydrothermal conditions and the effect of metal ions on the final structure and topology of the POMs-based hybrid compounds was discussed. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple Metal Binding Domains Enhance the Zn(II) Selectivity of the Divalent Metal Ion Transporter AztA

Transition metal-transporting P{sub 1B}-type CPx ATPases play crucial roles in mediating metal homeostasis and resistance in all cells. The degree to which N-terminal metal binding domains (MBDs) confer metal specificity to the transporter is unclear. We show that the two MBDs of the Zn/Cd/Pb effluxing pump Anabaena AztA are functionally nonequivalent, but only with respect to zinc resistance. Inactivation of the a-MBD largely abrogates resistance to high intracellular Zn(II) levels, whereas inactivation of the b-MBD is not as deleterious. In contrast, inactivation of either the a- or b-MBD has little measurable impact on Cd(II) and Pb(II) resistance. The membrane proximal b-MBD binds Zn(II) with a higher affinity than the distal N-terminal a-MBD. Facile Zn(II)-specific intermolecular transfer from the a-MBD to the higher-affinity b-MBD is readily observed by {sup 1}H-{sup 15}N HSQC spectroscopy. Unlike Zn(II), Cd(II) and Pb(II) form saturated 1:1 S{sub 4} or S{sub 3}(O/N) complexes with AztA{sup aHbH}, where a single metal ion bridges the two MBDs. We propose that the tandem MBDs enhance Zn(II)-specific transport, while stabilizing a non-native inter-MBD Cd/Pb cross-linked structure that is a poor substrate and/or regulator for the transporter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complexes of Platinum Group Metals with a Conformationally Locked Scorpionate in a Metal–Organic Framework: An Unusually Close Apical Interaction of Palladium(II)

Here, we report synthetic strategies for installing platinum group metals (PGMs: Pd, Rh, Ir, and Pt) on a scorpionate-derived linker (TpmC*) within a metal–organic framework (MOF), both by room-temperature postsynthetic metalation and by direct solvothermal synthesis, with a wide range of metal loadings relevant for fundamental studies and catalysis. In-depth studies for the palladium adduct Pd(II)@Zr-TpmC* by density-functional-theory-assisted extended X-ray absorption fine structure spectroscopy reveals that the rigid MOF lattice enforces a close Pd(II)–N apical interaction between the bidentate palladium complex and the third uncoordinated pyrazole arm of the TpmC* ligand (Pd–N apical = 2.501 ± 0.067 Å), an interaction that is wholly avoided in molecular palladium scorpionates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Insights on the Structure of Electrochemically Deposited Lithium Metal and Its Solid Electrolyte Interphases via Cryogenic TEM

Lithium metal has been considered as the “holy grail” anode material for rechargeable batteries though the dendritic growth and low Coulombic efficiency (CE) have crippled its practical use for decades. Its high chemical reactivity and low stability make it difficult to explore the intrinsic chemical and physical properties of the electrochemically deposited lithium (EDLi) and its accompanied solid electrolyte interphase (SEI). To prevent the dendritic growth and enhance the electrochemical reversibility, it is crucial to understand the nano- and meso- structures of EDLi. However, Li metal is very sensitive to beam damage and has low contrast for commonly used characterization techniques such as electron microscopy. Inspired by biological imaging techniques, this work demonstrates the power of cryogenic (cryo)- electron microscopy to reveal the detailed structure of EDLi and the SEI composition at the nano scale while minimizing beam damage during imaging. Surprisingly, the results show that the nucleation dominated EDLi (five minutes at 0.5 mA cm-2) is amorphous while there is some crystalline LiF present in the SEI. The EDLi grown from various electrolytes with different additives exhibits distinctive surface properties. Consequently, these results highlight the importance of the SEI and its relationship with the CE. Our findings not only illustrate the capabilities of cryogenic microscopy for beam (thermal)-sensitive materials, but it yields crucial structural information of the EDLi evolution with and without electrolyte additives.

electrochemical deposition↗

High-voltage lithium-metal batteries enabled by localized high-concentration electrolytes

Lithium metal batteries face safety and low Coulombic Efficiency barriers. Superconcentrated electrolyte is stable with lithium metal but exhibits high cost and poor wettability. We report a localized superconcentrated electrolyte by diluting a superconcentrated electrolyte with an ‘inert’ diluent which does not dissolve the salt but miscible with the solvent used in the superconcentrated electrolyte. This electrolyte exhibits low cost, good wettability, and enables dendrite-free lithium cycling with high Coulombic Efficiency (99.3%) and stability (> 95% capacity retention after 300 cycles) of lithium||LiNixMnyCozO2 batteries. The concept of localized superconcentrated electrolyte can also be applied to other multi-functional electrolytes for broad applications.

Coulomic efficiency, anode, batteries↗

Polymer-in-"quasi-ionic liquid" electrolytes for high-voltage lithium metal batteries

Due to the limited oxidation stability (< 4 V) of ether oxygen, PEO-based polymer electrolytes are not compatible with high-voltage (> 4 V) cathodes, restricting the energy density of lithium (Li) metal batteries. Here, we design a new type of polymer in quasi-ionic liquid electrolyte (PQILE) that reduces the lone electron pairs of ether oxygens from PEO and ether solvent, induces the formation of stable interfacial layers on both surfaces of LiNi1/3Mn1/3Co1/3O2 cathode and Li metal anode, resulting in a capacity retention of 88.4%, 86.7% and 79.2% after 300 cycles with the charge cutoff voltage of 4.2, 4.3 and 4.4 V, respectively. It’s promising to use quasi-ionic liquids to design new polymer electrolytes for high-voltage and high-specific-energy Li metal batteries.

Wu, Haiping↗

Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal–Organic Frameworks

Abstract Cooperative cluster metalation and ligand migration were performed on a Zr‐MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr 6 M 4 (M=Ni, Co) clusters. The M 2+ reacts with the μ 3 ‐OH and terminal H 2 O ligands on an 8‐connected [Zr 6 O 4 (OH) 8 (H 2 O) 4 ] cluster to form a bimetallic [Zr 6 M 4 O 8 (OH) 8 (H 2 O) 8 ] cluster. Along with the metalation of Zr 6 cluster, ligand migration is observed in which a Zr–carboxylate bond dissociates to form a M–carboxylate bond. Single‐crystal to single‐crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single‐crystal X‐ray structures. In 3+ was metalated into the same Zr‐MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr‐MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.

Yuan, Shuai↗

Metal–Organic Frameworks with Low‐Valent Metal Nodes

Abstract Metal–organic frameworks (MOFs) are crystalline, 2‐ and 3‐dimensional coordination polymers formed by bonding interactions between metals and multitopic organic ligands. These are typically formed using hard Lewis basic organic ligands with high oxidation state metal ions. The use of low‐valent metals as structural elements in MOFs is far less common, despite the widespread use of such metals for catalysis, luminescence, and other applications. This Minireview focuses on recent advances in the field of low‐valent MOFs and offers a perspective on the future development of these materials.

Sikma, R. Eric↗

Metal–Organic Frameworks with Low–Valent Metal Nodes

Metal–organic frameworks (MOFs) are crystalline, 2- and 3-dimensional coordination polymers formed by bonding interactions between metals and multitopic organic ligands. These are typically formed using hard Lewis basic organic ligands with high oxidation state metal ions. The use of low-valent metals as structural elements in MOFs is far less common, despite the widespread use of such metals for catalysis, luminescence, and other applications. Furthermore, this Minireview focuses on recent advances in the field of low-valent MOFs and offers a perspective on the future development of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembled porous metal-intermetallic nanocomposites via liquid metal dealloying

A major challenge in the synthesis of high surface area metals via subtractive processes such as dealloying is maintaining the mechanical integrity of the resulting porous materials. This issue is especially apparent in liquid metal dealloying, in which high-temperature selective dissolution in a molten metal bath leads to bicontinuous porosity formation. In liquid metal dealloying of polycrystalline alloys, grain boundary separation leads to the detachment of individual grains. In this work, we show that addition of small amounts of silicon to Nbsingle bondTi or Tasingle bondTi parent alloys leads to the generation of self-assembled arrays of intermetallic (niobium silicide or tantalum silicide) plates that are structurally merged with the usual bicontinuous porosity seen in dealloying. These silicide plates pass through grain boundaries and hold the niobium or tantalum network intact without strongly affecting the microstructural evolution during dealloying. Our approach yields a mechanically robust porous metal-intermetallic composite, which can be further processed to form tertiary materials via re-impregnation by a new third phase. The materials design strategy introduced here can be generalized to serve as a platform to form dense multiphase nanocomposites.

36 MATERIALS SCIENCE↗

Metal leaching from Lithium-ion and Nickel-metal hydride batteries and photovoltaic modules in simulated landfill leachates and municipal solid waste materials

Photovoltaic (PV) modules and batteries can either be recycled or disposed of in landfills at end-of-life (EoL). This work focuses on disposal since the benefit of recycling PV modules and batteries is well established. This study characterizes the potential toxicity due to metals leaching from selected PV modules and batteries through both the Toxicity Characteristic Leaching Procedure (TCLP) and in-house batch leaching protocols to probe the impact on metallic ion mobility as a function of the different types of e-waste entering the waste stream, the magnitude of device damage when placed into the waste stream, and the simulated municipal solid waste (SMSW) composition. Our results showed that one PV module and three battery types in this study should be classified as hazardous waste within the U.S. However, for some of the other e-wastes, metals of concern including Cr, Cu, Hg, Ni, Pb, and Zn leached during the batch tests but not in the TCLP regulatory method. For most of the waste types, the amounts of metals that leached in the TCLP test and batch tests were much lower than the total extractable amounts, demonstrating the potential for additional unaccounted for amounts of metals to leach. Our results demonstrate that the TCLP regulatory method might fail at predicting potential leaching and at capturing the complexity of e-waste leaching in landfill conditions. It confirms that additional work is needed urgently to develop appropriate EoL procedures for MSW with PV and battery e-waste.

42 ENGINEERING↗

Acid Strength and Bifunctional Catalytic Behavior of Alloys Comprised of Noble Metals and Oxophilic Metal Promoters

The promotion of metal catalysts with partially oxidized oxophilic MOx species, such as ReOx-promoted Rh, has been demonstrated to produce Brønsted acid sites that can promote hydrogenolysis of oxygenate intermediates such as those found in biomass-derived species. A wide variety of alloy compositions and structures are examined in this work to investigate strongly acidic promoters by using DFT-calculated deprotonation energies (DPE) as a measure of acid strength. Sites with the highest acid strength had DPE less than 1100 kJ mol-1, similar to DPE values of heteropolyacids or acid-containing zeolites, and were found on alloys composed of an oxophilic metal (such as Re or W) with a noble metal (such as Rh or Pt). NH3 adsorbs more strongly to sites with increasing acid strength and the activation barriers for acid-catalyzed ring opening of a furan ring decrease with increasing acid strength, which was also shown to be stronger for OH acid sites bound to multiple oxophilic metal atoms in a three-fold configuration rather than OH sites adsorbed in an atop configuration on one oxophilic metal, indicating that small MOx clusters may yield sites with the highest acid strength.

Environmental Molecular Sciences Laboratory↗

Quantitative Morphological Characterization of Carbide Inclusions in Uranium Metal

Uranium carbides (UCs) are prevalent inclusions in U metal that form during melting operations from interactions with crucible walls and the casting chamber atmosphere. Although UCs have been studied extensively since the beginning of U metal foundry operations, there are still unknowns regarding the effects of thermomechanical processing on their sizes and morphology. Here, we present the results of a series of controlled cooling experiments with molten uranium to elucidate the effect of cooling rate on inclusion morphology in a-U. Samples were melted using a vacuum induction melter and manually cooled at rates of 2.5, 1.7, 1.1, 0.8, 0.3 (± 1%) K/s from ~1600 K to <700 K in under 1 hour. Subsequent scanning electron microscopy (SEM) was performed on cross-sections of the samples, revealing a complex mixture of UC morphologies that are indicative of diffusion and growth influenced by the thermal processing of the U matrix. Image analysis using the Morphological Analysis of Materials (MAMA) software showed that UC sizes generally grew larger with slower cooling rates, and the two slowest cooling rates noticeably impacted the inclusion circularity and ellipse aspect ratio. These results indicate that UC morphology is sensitive to short cooling rates (<1 hour) and could therefore be controlled in the production of metallic nuclear fuels. Additionally, inclusion speciation and morphologies could potentially provide forensic clues about processing history of unknown metal samples. Understanding the driving forces involved in UC morphology evolution is beneficial for evaluating metal fuels for next generation nuclear reactors and for identifying signatures for nuclear forensics.

Athon, Matthew T.↗