Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MANIFOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Improved Cryostat for Cooling a Wide Panel

An improved cryostat has been developed for cooling a wide panel evenly over its surface to a temperature of -423 F (approximately equal to -253 C) by use of liquid helium. Originally, the cryostat was to be used in measuring apparent strains in wide aluminum/lithium panels as functions of temperature in order to develop data for temperature compensation of the readings of strain gauges on a tank containing liquid hydrogen. Relative to the cryostat used previously for this purpose, the improved cryostat can be prepared for a test in less time, and it loses less helium during each test. Each wide panel to be tested is instrumented with thermocouples in preparation for a test. The previous cryostat was made of two aluminum halves that, for each test, were sandwiched together and sealed around the instrumented wide panel to be tested. The panel was thus enclosed in a plenum. The cryostat and adjacent panel areas protruding from the cryostat were then coated with a thermally insulating foam. During a test, liquid helium was made to flow into the plenum through a port on the bottom. The helium vaporized and expanded, filling the plenum with cold helium gas, which eventually flowed out of the plenum through a port on the top. The nature of the flow was such that a significant portion of the helium did not come into contact with the wide panel; hence, cooling was less efficient than it might otherwise have been. After completion of each test, the foam and the cryostat were separated from the panel. The cryostat was cleaned and prepared for installation on another instrumented wide panel for the next test. It took 28 hours to install the cryostat onto the instrumented panel, apply the foam, and perform ancillary operations in preparation for a test. The volume of liquid helium consumed during each test was 750 liters. The improved cryostat (see figure) includes an upper section and a lower section, both of which include permanent housings made of a thermally insulating foam 2-in. (approximately equal to 5-cm) thick. A liquid-helium- injection manifold is attached to the inside of the top section. The bottom section includes an outlet for helium gas. The manifold contains slots that, when the cryostat is installed on the panel, are located approximately 1 in. (approximately equal to 2.5 cm) from the wide panel. The array of slots spans a substantial portion of the area of the panel. The top and bottom sections of the cryostat are sealed to the panel by use of polytetrafluoroethylene cord and aluminum tape. Liquid helium is fed into the manifold from the top. The helium leaves the manifold through the slots and thus impinges directly on the panel. Hence, all the helium entering the cryostat must come into contact with the panel before leaving the cryostat. After a test, the cryostat is removed from the panel and reinstalled onto another panel for the next test. Installation of the cryostat on an instrumented panel takes a negligible amount of time, in comparison with the 28 hours associated with the previous cryostat. The amount of liquid helium consumed during a test in the improved cryostat is 500 liters - 250 liters less than before.

Clifton, W. B.↗

Modeling of Supersonic Film Cooling on the J-2X Nozzle Extension

Supersonic film cooling (SSFC) of nozzles has been used in several liquid rocket engine designs, and is being applied to the nozzle extension (NE) of the J-2X upper stage engine currently under development. Turbine exhaust gas (TEG) is injected tangentially from a manifold along the NE, and provides a thermal barrier from the core nozzle flow for the NE. As the TEG stream mixes with the nozzle flow, the effectiveness of the thermal barrier is reduced. This paper documents computational fluid dynamics (CFD) analysis work performed by NASA Marshall Space Flight Center (MSFC) to model the flow of the TEG through the manifold, into the nozzle, and the subsequent mixing of the TEG stream with the core flow. The geometry and grid of the TEG manifold, structural support ribs, and the NE wall will be shown, and the CFD boundary conditions described. The Loci-CHEM CFD code used in this work will also be briefly described. A unique approach to modeling the combined TEG manifold/thrust chamber assembly (TCA) was employed, as it was not practical to model the entire 360 circumferential range in one simulation. Prior CFD validation work modeling Calspan SSFC experiments in the early 1990s, documented in a previous AIAA paper, will also be briefly discussed. The fluid dynamics of the TEG flow through the manifold, into and between the structural support ribs, and into the nozzlette that feeds the TCA will be described. Significant swirl and non-uniformities are present, which along with the wakes from the ribs, act to degrade the film cooling effectiveness compared to idealized injection of TEG gas. The effect of these flow characteristics on the adiabatic wall temperature profile on the NE will be discussed.

Ruf, Joseph H.↗

Multipoint Fuel Injection Arrangements

A multipoint fuel injection system includes a plurality of fuel manifolds. Each manifold is in fluid communication with a plurality of injectors arranged circumferentially about a longitudinal axis for multipoint fuel injection. The injectors of separate respective manifolds are spaced radially apart from one another for separate radial staging of fuel flow to each respective manifold.

Prociw, Lev Alexander↗

Reachability Subspace Exploration Using Continuation Methods

Reachability manifold computation suffers from the curse of dimensionality and for large state spaces is computationally intractable. This paper examines the use of continuation methods to address this issue by formulating the reachability sub-space manifold calculation into a number of initial valued problems. As a result of computing the reachability manifold for a subspace of interest, an exponential improvement in computational cost occurs. This concept is applied to a position subspace reachability problem of a spacecraft in a Keplerian orbit under maximum thrust constraints. Future work includes a comparison of the proposed method with computing reachability manifolds using viscosity solutions of the Hamilton Jacobi Bellman partial differential equation.

orbital mechanics↗

Europa Lander Trajectory Design Using Lissajous Staging Orbits

Lissajous orbits and approximation of their invariant manifolds are used to generate landing trajectories to the surface of Europa. Each lissajous is discretized into individual revolutions that each resemble a periodic orbit. The unstable manifolds of each individual revolution propagated forward in time generate more surface coverage than manifolds of simple libration point orbits such as halo or Lyapunov orbits. The stable manifolds propagated backwards in time from the individual lissajous revolutions provide direct connections to the last phase of a moon tour. The strategy developed produces ballistic landing trajectories with a wide surface coverage, and allows for the decoupling of the landing and moon tour phase by using the lissajous as an intermediate staging orbit. The multiple revolutions of the lissajous, multiple departure times along each revolution, multiple quasi periodic options at each energy, and multiple energies of the lissajous family provide many degrees of freedom in the design process.

McElarth, Timothy P.↗

Using GPUs and the Parameterization Method for Rapid Search and Refinement of Connections between Tori in Periodically Perturbed Planar Circular Restricted 3-Body Problems

When the planar circular restricted 3-body problem is periodically perturbed, most unstable periodic orbits become invariant tori. However, 2D Poincare ́ sections no longer work to find their manifolds’ intersections; new methods are needed. In this study, we first review a method of restricting the intersection search to only certain manifold subsets. We then implement this search using Julia and OpenCL, representing the manifolds as triangular meshes and gaining a 30x speedup using GPUs. We finally show how to use manifold parametrizations to refine the ap- proximate connections found in the mesh search. We demonstrate the tools on the planar elliptic RTBP.

de la Llave, Rafael↗

Scalable microreactors and methods for using same

The present invention provides a scalable microreactor comprising a multilayered reaction block having alternating reaction plates and heat exchanger plates that have a plurality of microchannels; a multilaminated reactor input manifold, a collecting reactor output manifold, a heat exchange input manifold and a heat exchange output manifold. The present invention also provides methods of using the microreactor for multiphase chemical reactions.

Lawal, Adeniyi↗

Method of forming a package for MEMS-based fuel cell

A MEMS-based fuel cell package and method thereof is disclosed. The fuel cell package comprises seven layers: (1) a sub-package fuel reservoir interface layer, (2) an anode manifold support layer, (3) a fuel/anode manifold and resistive heater layer, (4) a Thick Film Microporous Flow Host Structure layer containing a fuel cell, (5) an air manifold layer, (6) a cathode manifold support structure layer, and (7) a cap. Fuel cell packages with more than one fuel cell are formed by positioning stacks of these layers in series and/or parallel. The fuel cell package materials such as a molded plastic or a ceramic green tape material can be patterned, aligned and stacked to form three dimensional microfluidic channels that provide electrical feedthroughs from various layers which are bonded together and mechanically support a MEMS-based miniature fuel cell. The package incorporates resistive heating elements to control the temperature of the fuel cell stack. The package is fired to form a bond between the layers and one or more microporous flow host structures containing fuel cells are inserted within the Thick Film Microporous Flow Host Structure layer of the package.

30 DIRECT ENERGY CONVERSION↗

Variable-speed supercharger for highly diluted internal combustion engines

An engine control system includes an internal combustion engine including a plurality of cylinders. An intake manifold is connected to the internal combustion engine. An exhaust manifold is connected to the internal combustion engine. A supercharger is connected to an air intake passage and the intake manifold and includes a variable speed drive. A throttle valve is disposed in the air intake passage. An exhaust passage is in connection with the exhaust manifold. A passive selective catalytic reduction catalyst system is in communication with the exhaust passage. An exhaust gas recirculation passage is in communication with the exhaust passage and the air intake passage and includes an exhaust gas recirculation valve. A controller controls the variable speed drive of the supercharger and the throttle valve and the exhaust gas recirculation valve based upon engine conditions.

42 ENGINEERING↗

High performance redox flow battery stack

A redox flow battery stack cell frame comprising a support frame and a monolithic bipolar plate integrated within the support frame is disclosed. The bipolar plate comprises a plurality of interdigitated flow channels on at least one surface. The support frame comprises an inlet manifold formed into a facing surface of the first side of the frame, the inlet manifold comprising fluid inlet distribution channels in a serpentine arrangement, each fluid inlet distribution channel aligned with a single inlet flow channel of the bipolar plate; and an outlet manifold formed into the facing surface of the opposing side of the frame, the outlet manifold comprising fluid outlet distribution channels in a serpentine arrangement, each fluid outlet distribution channel aligned with a single outlet flow channel of the bipolar plate. Redox flow battery stack cells and stacks comprising the stack cell frame are also disclosed.

25 ENERGY STORAGE↗

Counter-flow ceramic heat exchanger assembly and method

A heat exchanger assembly embodiment includes a plurality of laminated ceramic tape layers having at least one hole surrounded by at least one tape remainder portion. The plurality of layers is arranged in a build direction defined parallel to a counter-flow plane. Each laminated ceramic tape layer is stacked and sintered to define a ceramic core section integrally formed with a first ceramic manifold and a second ceramic manifold. The ceramic core section of the assembly includes a plurality of spaced apart counter-flow plates stacked along a stacking direction normal to the counter-flow plane and the build direction, defining a plurality of flow passages parallel to the counter-flow plane. Each flow passage is in communication with the first manifold and the second manifold. A plurality of counter-flow fins is disposed in at least one of the plurality of flow passages, between adjacent ones of the plurality of counter-flow plates.

Ranjan, Ram↗

System for rebalancing a pressure differential in an anode exhaust system of a fuel cell with a relational water seal

A fuel cell system includes at least one fuel cell module and at least one relational water seal configured to limit a magnitude of a pressure differential in the fuel cell system in an anode under-pressurization situation in which the second pressure exceeds the first pressure by at least a first predetermined amount. The fuel cell module includes a fuel cell assembly having one or more fuel cells arranged in a stack configuration, an anode inlet manifold, an anode outlet manifold having a first pressure, a cathode inlet manifold having a second pressure, and a cathode outlet manifold.

30 DIRECT ENERGY CONVERSION↗

Turbocharger system with turbine bypass circuit to reduce emissions during engine cold start

An engine system includes an engine having first and second exhaust manifolds each having outlet ports and a bypass runner. A first turbocharger is in fluid communication with the outlet port of the first manifold, and a second turbocharger in fluid communication with the outlet port of the second manifold. An exhaust aftertreatment device is in fluid communication with the first and second turbochargers. A turbocharger bypass circuit includes a valve assembly having an inlet side connected in fluid communication with the bypass runners of the first and second manifolds, an outlet side in fluid communication with the aftertreatment device, and a valve having an open position in which the inlet and outlet sides are in fluid communication and a closed position in which the inlet and outlet sides are not in fluid communication.

Plagens, Keith Michael↗

Multi-channel pulsed valve inlet system and method

A multichannel inlet system for a mass spectrometer includes a plurality of valve assemblies coupled to a manifold, and a pulsed valve driver. The manifold is configured to be connected in fluid connection with an ion trap of the mass spectrometer. Each valve assembly includes a valve and an injection port operably coupled to receive the reagent. The valve has an actuated state in which the valve provides fluid communication between the injection port and the manifold, and an unactuated state in which the valve substantially prevents fluid communication between the injection port and the manifold. The pulsed valve driver is operably connected to receive a pulse signal sequence from a processor, and is configured to generate pulsed valve drive signals for one or more of the valves based on the pulse signal sequence to cause a corresponding one of the valves to be in the actuated state.

Kenttamaa, Hilkka↗

Numerical simulation of break flows occurring in the reactor cavity cooling system of a very high temperature reactor using a system CFD approach - 18437

To avoid accidents due to human error or the failure of components, the reactor cavity cooling system (RCCS) of a high temperature reactor must be able to operate naturally or passively safe. The system under consideration in this investigation is an air-cooled system which consists of an annular downcomer which is connected via a bottom-header to riser tubes. The downcomer and riser tubes are connected to the atmosphere via inlet and outlet manifold systems respectively. In this study the entire system is simulated using the 1D network codes GAMMA+ and Flownex. The study investigates the effect that breaks, causing a short circuit between one half of the inlet manifold and the corresponding half of the outlet manifold, will have on the performance of the cooling system. The agreement between the results obtained with the two codes is good. When the break size exceeds a certain value the flow may reverse in the relevant half of the outlet manifold. The critical break size is dependent on the elevation at which the break occurs. The reversal in the flow results in a drop of 10% in the heat removal capacity of the RCCS. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Extended Hamiltonians and shift, ladder functions and operators

In recent years, many natural Hamiltonian systems, classical and quantum, with constants of motion of high degree, or symmetry operators of high order, have been found and studied. Most of these Hamiltonians, in the classical case, can be included in the family of extended Hamiltonians, geometrically characterized by the structure of warped manifold of their configuration manifold. For the extended Hamiltonians, the characteristic constants of motion of high degree are polynomial in the momenta of determined form. We consider here a different form of the constants of motion, based on the factorization procedure developed for systems of two degrees of freedom by S. Kuru, J. Negro and others. We show that an important subclass of the extended Hamiltonians, with arbitrary dimension, admits factorized constants of motion and we determine their expression. The classical constants can be polynomial or non-polynomial in the momenta, but the factorization procedure allows, in a type of extended Hamiltonians, their quantization via shift and ladder operators, for systems of any finite dimension. - Highlights: • A factorization procedure is proposed for first integrals of high degree of extended Hamiltonian systems. • The extended Hamiltonians are defined on warped manifolds of any finite dimension. • Polynomial first integrals are quantized into factorized polynomial symmetry operators of Laplace–Beltrami-type quantum Hamiltonians.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A nonlinear data-driven reduced order model for computational homogenization with physics/pattern-guided sampling

Developing an accurate nonlinear reduced order model from simulation data has been an outstanding research topic for many years. For many physical systems, data collection is very expensive and the optimal data distribution is not known in advance. Thus, maximizing the information gain remains a grand challenge. In a recent paper, Bhattacharjee and Matouš (2016) proposed a manifold-based nonlinear reduced order model for multiscale problems in mechanics of materials. Expanding this work here, we develop a novel sampling strategy based on the physics/pattern-guided data distribution. Our adaptive sampling strategy relies on enrichment of sub-manifolds based on the principal stretches and rotational sensitivity analysis. This novel sampling strategy substantially decreases the number of snapshots needed for accurate reduced order model construction (i.e., ~5 x reduction of snapshots over Bhattacharjee and Matouš (2016)). Moreover, we build the nonlinear manifold using the displacement rather than deformation gradient data. We provide rigorous verification and error assessment. We demonstrate both localization and homogenization of the multiscale solution on a large particulate composite unit cell.

97 MATHEMATICS AND COMPUTING↗

Effect of the length of the poloidal ducts on flow balancing in a liquid metal blanket

To address concerns associated with liquid metal (LM) flow balancing among multiple poloidal channels of a LM blanket, we investigate the factors (first of all the length of the channels) that influence the flow distribution when the duct walls are electrically insulated. We simulate LM MHD flow through multiple channels fed by a prototypical manifold for a range of channel lengths using a 3D MHD solver, HIMAG. The simplified manifold geometry consists of a rectangular, electrically insulated feeding duct which suddenly expands such that the duct thickness in the magnetic field direction abruptly increases by a factor of 4. After a short length downstream of the expansion, the flow is divided into three identical parallel channels. By measuring the flow rate in each of the channels, we conclude that flow balance among the channels is improved by increasing the length of the channels. An effort is made to obtain scaling laws that characterize flow balancing as a function of the flow parameters and the manifold geometry using a Resistor Network Model (RNM). Associated Hartman and Reynolds numbers in the computations were ~10 3 and 10 2 respectively. Compared to the full 3D analysis, the proposed RNM suggests a relatively quick and simpler way of computing the blanket length that might be needed to provide balanced flow among the parallel channels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗