Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Magnetic gold nanotriangles by microwave-assisted polyol synthesis

Simple approaches to synthesize hybrid nanoparticles with magnetic and plasmonic functionalities, with high control of their shape and avoiding cytotoxic reactants, to target biomedical applications remain a huge challenge. Here, we report a facile, fast and bio-friendly microwave-assisted polyol route for the synthesis of a complex multi-material consisting of monodisperse gold nanotriangles around 280 nm in size uniformly decorated by superparamagnetic iron oxide nanoparticles of 5 nm. These nanotriangles are readily dispersible in water, display a strong magnetic response (10 wt% magnetic fraction) and exhibit a localized surface plasmon resonance band in the NIR region (800 nm). Moreover, these hybrid particles can be easily self-assembled at the liquid–air interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intracellular Dynamics of Superparamagnetic Iron Oxide Nanoparticles for Magnetic Partical Imaging

Superparamagnetic iron oxide nanoparticles (SPIONs) are a foundational platform for a variety of biomedical applications. Of particular interest is Magnetic Particle Imaging (MPI), which is a growing area of research and development due to its advantages including high resolution and sensitivity with positive contrast. There has been signicant work in the area of in vivo optimization of SPIONs for MPI as well as their biodistribution in and clearance from the body. However, little is known about the dynamics of SPIONs following cellular internalization which may limit their usefulness in a variety of potential imaging and treatment applications. This work shows a clear 20% decrease in magnetic performance of SPIONs, as observed by Magnetic Particle Spectroscopy (MPS), after internalization and systematic consideration of applicable factors that aect SPION signal generation, including microstructure, environment, and interparticle interactions. There is no observed change to SPION microstructure after internalization, and the surrounding environment plays little to no role in magnetic response for the SPIONs studied here. Interparticle interactions described by dipole-dipole coupling of SPIONs held close to one another after internalization are shown to be the dominant cause of decreased magnetic performance in cells. These conclusions were drawn from transmission electron microscopy (TEM) image analysis at relevant length scales, experimentally prepared and characterized SPIONs in varied environmental conditions, and theoretical modeling with Monte Carlo simulations.

Teeman, Eric M.↗

In-depth investigation of large axial magnetic anisotropy in monometallic 3d complexes using frequency domain magnetic resonance and ab initio methods: a study of trigonal bipyramidal Co( II )

The magnetic properties of 3d monometallic complexes can be tuned through geometric control, owing to their synthetic accessibility and relative structural simplicity. Monodentate ligands offer great potential for fine-tuning the coordination environment to engineer both the axial and rhombic zero-field splitting (ZFS) parameters. In [CoCl 3 (DABCO)(HDABCO)] ( 1 ), the trigonal bipyramidal Co( II ) centre has two bulky axial ligands and three equatorial chloride ligands. An in-depth experimental and theoretical study of 1 reveals a large easy-plane magnetic anisotropy (+ve D ) with a negligible rhombic zero-field splitting ( E ) due to the strict axial symmetry imposed by the C 3 symmetric ligand and trigonal space group. The large easy-plane magnetic anisotropy ( D = +44.5 cm -1 ) is directly deduced using high-field EPR and frequency-domain magnetic resonance (FDMR) studies. Ab initio calculations reveal a large positive contribution to the D term arising from ground state/excited state mixing of the 4 E" states at ~4085 cm -1 and a minor contribution from the spin–flip transition as well. The nature of the slow relaxation in 1 is elucidated through analysis of the rates of relaxation of magnetisation, taking into account Raman and direct spin–lattice relaxation processes and Quantum Tunnelling of the Magnetisation (QTM). The terms relating to the direct process and QTM were found based on the fit of the field-dependence of $τ$ at 2 K. Subsequently, these were used as fixed parameters in the fit of the temperature-dependence of $τ$ to obtain the Raman terms. This experimental–theoretical investigation provides further insight into the power of FDMR and ab initio methods for the thorough investigation of magnetic anisotropy. Thus, these results contribute to design criteria for high magnetic anisotropy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of recording condition on the diffraction efficiency of magnetic hologram with magnetic garnet films

A holographic memory has been attracting attention as recording media with high recording density and high data transfer rate. We have studied the magnetic garnets as a rewritable and long life media for magnetic holography. However, since the signal intensity of reconstructed image was relatively low, the effects of recording conditions on the diffraction efficiency of magnetic hologram were investigated with experiments and the numerical simulation using COMSOL multi-physics. The diffraction efficiency tends to decrease as increasing the spatial frequency, and the use of short pulse laser with the pulse width of 50 ps was found to be effective to achieve high diffraction efficiency. This suggests that the formation of clear magnetic fringe similar to interference pattern can be obtained by the use of short pulse laser since undesirable heat diffusion during radiation does not occur. On the other hand, the diffraction efficiency increased as increasing the film thickness up to 3.1 μm but was saturated in the garnet film thicker than 3.1 μm in the case of spatial frequency of 1500 line pair/mm. The numerical simulation showed that the effective depth of magnetic fringe was limited about 1.8 μm irrespective of the garnet film thickness because the fringes were connected by thermal diffusion near the surface of the film, and the effective depth is limited due to this connection of the magnetic fringe. Avoiding this fringe connection, much higher diffraction efficiency will be achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increased magnetic damping of a single domain wall and adjacent magnetic domains detected by spin torque diode in a nanostripe

Spin torque resonance has been used to simultaneously probe the dynamics of a magnetic domain wall and of magnetic domains in a nanostripe magnetic tunnel junction. Due to the large associated resistance variations, we are able to analyze quantitatively the resonant properties of these single nanoscale magnetic objects. In particular, we find that the magnetic damping of both the domains and the domain wall is doubled compared to the damping value of the host magnetic layer. We estimate the contributions to the damping arising from the dipolar couplings between the different layers in the junction and from the intralayer spin pumping effect, and find that they cannot explain the large damping enhancement that we observe. We conclude that the measured increased damping is intrinsic to large amplitudes excitations of spatially localized modes or solitons such as vibrating or propagating domain walls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shielding of the azimuthal magnetic field by the anode plasma in a relativistic self-magnetic-pinch diode

In relativistic electron beam diodes, the self-generated magnetic field causes electron-beam focusing at the center of the anode. Generally, plasma is formed all over the anode surface during and after the process of the beam focusing. In this work, we use visible-light Zeeman-effect spectroscopy for the determination of the magnetic field in the anode plasma in the Sandia 10 MV, 200 kA (RITS-6) electron beam diode. The magnetic field is determined from the Zeeman-dominated shapes of the Al III 4 s –4 p and C IV 3 s –3 p doublet emissions from various radial positions. Near the anode surface, due to the high plasma density, the spectral line-shapes are Stark-dominated, and only an upper limit of the magnetic field can be determined. The line-shape analysis also yields the plasma density. The data yield quantitatively the magnetic-field shielding in the plasma. In conclusion, the magnetic-field distribution in the plasma is compared to the field-diffusion prediction and found to be consistent with the Spitzer resistivity, estimated using the electron temperature and charge-state distribution determined from line intensity ratios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling inter-particle magnetic correlations in magnetite nanoparticle assemblies using x-ray magnetic scattering data

Magnetic nanoparticles are increasingly used in nanotechnologies and biomedical applications, such as drug targeting, MRI, bio-separation. Magnetite (Fe 3 O 4 ) nanoparticles stand to be effective in these roles due to the non-toxic nature of magnetite and its ease of manufacture. To be more effective in these applications, a greater understanding of the magnetic behavior of a collection of magnetite nanoparticles is needed. This research seeks to discover the local magnetic ordering of ensembles of magnetite nanoparticles occurring under various external fields. To complete this study, we use x-ray resonant magnetic scattering (XRMS). Here we discuss the modeling of the magnetic scattering data using a one-dimensional chain of nanoparticles with a mix of ferromagnetic, anti-ferromagnetic, and random orders. By fitting the model to the experimental data, we extracted information about the magnetic correlations in the nanoparticle assembly.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Estimates of the wavenumber wavelet power spectrum of magnetic fluctuations during magnetic reconnection

Fluctuation analyses of experimental observations generally lack high temporal resolution and are in frequency-space f, contrary to theoretical efforts in wavenumber-space k. This is due to the inherent limits of the Fourier transform, though it is prominent due to the ease of diagnostic implementation. Advances in wavelet-based analysis have provided relief due to its temporal resolution, but in its common use, is still hard to compare to theoretical models. By using the two-point correlation technique in conjunction with large data sets, a wavelet power spectrum in wavenumber-space can be created. Dubbed the wavenumber wavelet power spectrum, this spectrum relates wavenumber to power in time. Further, this analysis technique more closely connects characterizations of experimentally observed fluctuations with other system parameters and theoretical predictions. In this article, we develop the wavenumber wavelet power spectrum using magnetic fluctuations caused by tearing instability driven magnetic reconnection in reproducible, high temperature laboratory plasmas. These dynamic magnetic fluctuations generated in reversed field pinch plasmas are broadband, ranging from the low frequency, 10's of kHz, up to the ion gyroradii frequencies, 100's of kHz. The dominant fluctuations have poloidal and toroidal mode numbers (m,n)=(1,6−10) and can grow to 2%–3% of the mean magnetic field. During these reconnection events, ions, and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases, all on a semi-periodic basis. The newly developed spectrum provides better temporal resolution of spectrum characteristics to correlate with these particle energization phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivity of the magnetic axis to variations in the magnetic field

Lagrangian variational principles are used to locate the magnetic axis and to determine its sensitivity to variations in the magnetic field. Only the change in the magnetic field on axis is required to determine, to lowest order, the location of the new magnetic axis. Using a simple example, namely, the magnetic field produced by a set of current-carrying filaments (a.k.a. coils), the variation in the coil geometry that induces the largest change in the magnetic axis is determined using singular value decomposition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Prandtl number dependence of the kinetic-to-magnetic dissipation ratio

Using direct numerical simulations of three-dimensional hydromagnetic turbulence, either with helical or non-helical forcing, we show that the kinetic-to-magnetic energy dissipation ratio always increases with the magnetic Prandtl number, i.e., the ratio of kinematic viscosity to magnetic diffusivity. This dependence can always be approximated by a power law, but the exponent is not the same in all cases. For non-helical turbulence, the exponent is around 1/3, while for helical turbulence it is between 0.6 and 2/3. In the statistically steady state, the rate of energy conversion from kinetic into magnetic by the dynamo must be equal to the Joule dissipation rate. We emphasize that for both small-scale and large-scale dynamos, the efficiency of the energy conversion depends sensitively on the magnetic Prandtl number, and thus on the microphysical dissipation process. To understand this behavior, we also study shell models of turbulence and one-dimensional passive and active scalar models. We conclude that the magnetic Prandtl number dependence is qualitatively best reproduced in the one-dimensional model as a result of dissipation via localized Alfvén kinks.

79 ASTRONOMY AND ASTROPHYSICS↗

Pattern formation in strongly magnetized plasmas: observations from the magnetized dusty plasma experiment (MDPX) device

The last decade has seen the development of new experimental devices to explore the physics of magnetized dusty plasmas. Because of the small charge-to-mass ratio of the charged microparticles, it is necessary to operate these experiments at high magnetic fields of several Tesla in order to observe the direct effect of the magnetic forces on the transport properties of the charged microparticles. While the study of magnetized dusty plasmas is still the ultimate goal, these experiments have also provided new opportunities to studies regimes of strongly magnetized, low temperature, laboratory plasmas that have not been extensively explored. Experiments show the formation of new types of self- and imposed-ordered structures that form in both the plasma and among the microparticles. This work summarizes recent experimental observations of plasma filamentation (in the plasma) and will discuss possible connections to 'dust gridding' phenomena that are observed in the magnetized dusty plasma experiment device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Borderline Magnetism: How Adding Mg to Paramagnetic Ce Co 3 Makes a 450-K Ferromagnet with Large Magnetic Anisotropy

A recent experimental study [Phys. Rev. Appl. 9, 024023 (2018)] on paramagnetic CeCo 3 finds that magnesium alloying induces a ferromagnetic transition with intrinsic properties large enough for permanent magnet applications. Here we explain these surprising results via a first-principles study of the electronic structure and magnetism of magnesium-alloyed CeCo 3 . We find the origin of this magnesium-induced ferromagnetic transition to be Stoner physics—the substantial increase in the Fermi-level density of states N(E F ) with Mg alloying. Here, our calculations suggest that both Ce and Co atoms are likely to be important for generating large magnetic anisotropy suggesting the viability of Co-3d and Ce-4f interaction for the generation of magnetic anisotropy in magnetic materials. These results offer a route to the discovery of ferromagnetic materials and provide fundamental insight into the magnetic properties of these alloys.

36 MATERIALS SCIENCE↗

Single-Crystal Permanent Magnets: Extraordinary Magnetic Behavior in the Ta-,Cu-, and Fe-Substituted CeCo 5 Systems

To reduce material and processing costs of commercial permanent magnets and to attempt to fill the empty niche of energy products, 10–20 MGOe, between low-flux (ferrites, alnico) and high-flux (Nd 2 Fe 14 B- and SmCo 5 -type) magnets, we report the synthesis, structure, magnetic properties, and modeling of Ta-, Cu-, and Fe-substituted CeCo 5 . Using a self-flux technique, we grow single crystals of Ce 15.1 Ta 1.0 Co 74.4 Cu 9.5 , Ce 16.3 Ta 0.6 Co 68.9 Cu 14.2 , Ce 15.7 Ta 0.6 Co 67.8 Cu 15.9 , Ce 16.3 Ta 0.3 Co 61.7 Cu 21.7 , and Ce 14.3 Ta 1.0 Co 62.0 Fe 12.3 Cu 10.4 . X-ray-diffraction analysis shows that these materials retain a CaCu 5 substructure and incorporate small amounts of Ta in the form of “dumbbells,” filling the 2e crystallographic sites within the one-dimensional hexagonal channel with the 1a Ce site, whereas Co, Cu, and Fe are statistically distributed among the 2c and 3g crystallographic sites. Scanning-electron-microscopy, energy-dispersive-x-ray-spectroscopy, and scanning-transmission-electron-microscopy examinations provide strong evidence of the single-phase nature of the as-grown crystals, even though they readily exhibit significant magnetic coercivities of approximately 1.6 kOe to approximately 1.8 kOe caused by Co-enriched, nanosized structural defects and faults that can serve as pinning sites. Heat treatments at 1040°C for 10 h and hardening at 400°C for 4 h lead to the formation of a so-called composite crystal with a bimodal microstructure that consists of a Ta-poor matrix and Ta-rich laminal precipitates. Formation of the composite crystal during the heat treatment creates a three-dimensional array of extended defects within a primarily single-grain single crystal, which greatly improves its magnetic characteristics. Possible causes for the formation of the composite crystal may be associated with Ta atoms leaving matrix interstices at lower temperatures and/or matrix degradation induced by decreased miscibility at lower temperatures. Furthermore Fe strongly increases both the Curie temperature and magnetization of the system resulting, in ( BH ) max ≈ 13 MGOe at room temperature.

36 MATERIALS SCIENCE↗

Helical magnetic ordering in Sr ( Co 1 - x Ni x ) 2 As 2

SrCo 2 As 2 is a peculiar itinerant magnetic system that does not order magnetically, but inelastic neutron-scattering experiments observe the same stripe-type antiferromagnetic (AF) fluctuations found in many of the Fe-based superconductors along with evidence of magnetic frustration. Here we present results from neutron diffraction measurements on single crystals of Sr(Co 1-x Ni x ) 2 As 2 that show the development of long-range AF order with Ni doping. However, the AF order is not stripe type. Rather, the magnetic structure consists of ferromagnetically aligned (FM) layers (with moments laying in the layer) that are AF arranged along c with an incommensurate propagation vector of (0 0 τ), i.e., a helix. Using high-energy x-ray diffraction, we find no evidence for a temperature-induced structural phase transition that would indicate a collinear AF order. This finding supports a picture of competing FM and AF interactions within the square transition-metal layers due to flat-band magnetic instabilities. However, the composition dependence of the propagation vector suggests that far more subtle Fermi surface and orbital effects control the interlayer magnetic correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frustrated magnetism from local moments in FeSe

We investigate properties of a spin-1 Heisenberg model with extended and biquadratic interactions, which captures crucial aspects of the low energy physics in FeSe. While we show that the model exhibits a rich phase diagram with four different magnetic ordering tendencies, we identify a parameter regime with strong competition between Néel, staggered dimer, and stripelike magnetic fluctuations, accounting for the physical properties of FeSe. We evaluate the spin and Raman responses using exact diagonalization. Through comparison with experiments we find enhanced magnetic frustration between Néel and collinear stripe ordering tendencies, which increases with increasing temperature. As a result, the explanation of these spectral behaviors with this frustrated spin model supports the idea of local spin interactions in FeSe.

36 MATERIALS SCIENCE↗

Sea quarks contribution to the nucleon magnetic moment and charge radius at the physical point

We report a comprehensive analysis of the light and strange disconnected-sea quarks contribution to the nucleon magnetic moment, charge radius, and the electric and magnetic form factors. The lattice QCD calculation includes ensembles across several lattice volumes and lattice spacings with one of the ensembles at the physical pion mass. We adopt a model-independent extrapolation of the nucleon magnetic moment and the charge radius. We have performed a simultaneous chiral, infinite volume, and continuum extrapolation in a global fit to calculate results in the continuum limit. We find that the combined light and strange disconnected-sea quarks contribution to the nucleon magnetic moment is μ M (DI) = –0.022(11)(09)μ N and to the nucleon mean square charge radius is ⟨r 2 ⟩ E (DI) = –0.019 (05)(05) fm 2 which is about 1/3 of the difference between the ⟨r$^{2}_{p}$⟩ E of electron-proton scattering and that of a muonic atom and so cannot be ignored in obtaining the proton charge radius in the lattice QCD calculation. Here, the most important outcome of this lattice QCD calculation is that while the combined light-sea and strange quarks contribution to the nucleon magnetic moment is small at about 1%, a negative 2.5(9)% contribution to the proton mean square charge radius and a relatively larger positive 16.3(6.1)% contribution to the neutron mean square charge radius come from the sea quarks in the nucleon. For the first time, by performing global fits, we also give predictions of the light and strange disconnected-sea quarks contributions to the nucleon electric and magnetic form factors at the physical point and in the continuum and infinite volume limits in the momentum transfer range of 0 ≤ Q 2 ≤ 0.5 GeV 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Azimuthal magnetic field distribution in gas-puff Z -pinch implosions with and without external magnetic stabilization

An experimental study of the magnetic field distribution in gas-puff Z pinches with and without a preembedded axial magnetic field (B z0 ) is presented. Spatially resolved, time-gated spectroscopic measurements were made at the Weizmann Institute of Science on a 300 kA, 1.6 μs rise time pulsed-power driver. The radial distribution of the azimuthal magnetic field, B θ , during the implosion, with and without a preembedded axial magnetic field of B z0 = 0.26 T, was measured using Zeeman polarization spectroscopy. The spectroscopic measurements of B θ were consistent with the corresponding values of B θ inferred from current measurements made with a B-dot probe. One-dimensional magnetohydrodynamic simulations, performed with the code TRAC-II, showed agreement with the experimentally measured implosion trajectory, and qualitatively reproduced the experimentally measured radial B θ profiles during the implosion when B z0 = 0.26 T was applied. Simulation results of the radial profile of B θ without a preembedded axial magnetic field did not qualitatively match experimental results due to magneto-Rayleigh-Taylor (MRT) instabilities. Furthermore, our analysis emphasizes the importance of MRT instability mitigation when studying the magnetic field and current distributions in Z pinches. Discrepancies of the simulation results with experiment are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗