Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MIRRORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Two dimensional density and its fluctuation measurements by using phase imaging method in GAMMA 10

Two dimensional (2D) plasma image analysis is useful to study the improvement of plasma confinement in magnetically confined fusion plasmas. We have constructed a 2D interferometer system with phase imaging method for studying 2D plasma density distribution and its fluctuation measurement in the tandem mirror GAMMA 10. 2D profiles of electron density and its fluctuation have been successfully obtained by using this 2D phase imaging system. We show that 2D plasma density and fluctuation profiles clearly depends on the axial confining potential formation with application of plug electron cyclotron heating in GAMMA 10.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A latitude-dependent analysis of the leptonic hypothesis for the Fermi Bubbles

The Fermi Bubbles are giant Galactic structures observed in both gamma-rays and microwaves. Recent studies have found support for the hypothesis that the gamma-ray and microwave emission can both be understood as arising from a hard cosmic ray electron population within the volume of the Bubbles, via inverse Compton scattering and synchrotron radiation, respectively. The relative rates of these processes are set by the relative energy density of the interstellar radiation field and the magnetic field within the Bubbles; consequently, under the hypothesis of a common origin, the combination of the gamma-ray and microwave measurements can be used to estimate the magnetic field within the Bubbles. We revisit the consistency of this hypothesis on a latitude-by-latitude basis, using data from Fermi, WMAP and Planck; estimate the variation of the electron spectrum within the Bubbles; and infer bounds on the magnetic field within the Bubbles as a function of distance from the Galactic plane. We find that while the microwave and gamma-ray spectra are generally consistent with the leptonic hypothesis for few-microGauss magnetic fields, there appears to be a preference for spectral hardening in the microwaves at mid-latitudes (especially in the $|b|$ ~ 25°–35° range) that is not mirrored in the gamma-rays. This result may hint at a non-leptonic contribution to the gamma-ray spectra; however, the discrepancy can be reconciled in purely leptonic models if the cut-off energy for the electrons is lower in this latitude range and the spectrum below the cut-off is harder.

79 ASTRONOMY AND ASTROPHYSICS↗

Deconvoluting the Magnetic Structure of the Commensurately Modulated Quinary Zintl Phase Eu 11– x Sr x Zn 4 Sn 2 As 12

The structure, magnetic properties, and 151 Eu and 119 Sn Mössbauer spectra of the solid-solution Eu 11– x Sr x Zn 4 Sn 2 As 12 are presented. A new commensurately modulated structure is described for Eu 11 Zn 4 Sn 2 As 12 ( R 3 m space group, average structure) that closely resembles the original structural description in the monoclinic C 2/ c space group with layers of Eu, puckered hexagonal Zn 2 As 3 sheets, and Zn 2 As 6 ethane-like isolated pillars. The solid-solution Eu 11– x Sr x Zn 4 Sn 2 As 12 (0 < x < 10) is found to crystallize in the commensurately modulated R 3 space group, related to the parent phase but lacking the mirror symmetry. Eu 11 Zn 4 Sn 2 As 12 orders with a saturation plateau at 1 T for 7 of the 11 Eu 2+ cations ferromagnetically coupled (5 K) and shows colossal magnetoresistance at 15 K. The magnetic properties of Eu 11 Zn 4 Sn 2 As 12 are investigated at higher fields, and the ferromagnetic saturation of all 11 Eu 2+ cations occurs at ~8 T. The temperature-dependent magnetic properties of the solid solution were investigated, and a nontrivial structure–magnetization correlation is revealed. The temperature-dependent 151 Eu and 119 Sn Mössbauer spectra confirm that the europium atoms in the structure are all Eu 2+ and that the tin is consistent with an oxidation state of less than four in the intermetallic region. The spectral areas of both Eu(II) and Sn increase at the magnetic transition, indicating a magnetoelastic effect upon magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cosmic-ray parallel and perpendicular transport in turbulent magnetic fields

A correct description of cosmic-ray (CR) diffusion in turbulent plasma is essential for many astrophysical and heliospheric problems. This paper aims to present the physical diffusion behavior of CRs in actual turbulent magnetic fields, a model of which has been numerically tested. We perform test particle simulations in compressible magnetohydrodynamic turbulence. We obtain scattering and spatial diffusion coefficients by tracing particle trajectories. We find no resonance gap for pitch-angle scattering at 90°. Our result confirms the dominance of mirror interaction with compressible modes for most pitch angles, as revealed by the nonlinear theory. For cross-field transport, our results are consistent with normal diffusion predicted earlier for large scales. The diffusion behavior strongly depends on the Alfvénic Mach number and the particle's parallel mean free path. We, for the first time, numerically derive the dependence of M{sub A}{sup 4} for the perpendicular diffusion coefficient with respect to the mean magnetic field. We conclude that CR diffusion coefficients are spatially correlated to the local turbulence properties. On scales smaller than the injection scale, we find that CRs are superdiffusive. We emphasize the importance of our results in a wide range of astrophysical processes, including magnetic reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗

The effects of flow-inhomogeneities on molecular cloud formation: Local versus global collapse

Observational evidence from local star-forming regions mandates that star formation occurs shortly after, or even during, molecular cloud formation. Models of molecular cloud formation in large-scale converging flows have identified the physical mechanisms driving the necessary rapid fragmentation. They also point to global gravitational collapse driving supersonic turbulence in molecular clouds. Previous cloud formation models have focused on turbulence generation, gravitational collapse, magnetic fields, and feedback. Here, we explore the effect of structure in the flow on the resulting clouds and the ensuing gravitational collapse. We compare two extreme cases, one with a collision between two smooth streams, and one with streams containing small clumps. We find that structured converging flows lead to a delay of local gravitational collapse ({sup c}ore formation{sup )}. Hence, the cloud has more time to accumulate mass, eventually leading to a strong global collapse, and thus to a high core formation rate. Uniform converging flows fragment hydrodynamically early on, leading to the rapid onset of local gravitational collapse and an overall low core formation rate. This is also mirrored in the core mass distribution: the uniform initial conditions lead to more low-mass cores than the clumpy initial conditions. Kinetic (E{sub k} ) and gravitational energy (E{sub g} ) budgets suggest that collapse is only prevented for E{sub k} >> E{sub g} , which occurs for large scales in the smooth flow, and for small scales for the clumpy flow. Whenever E{sub k} ≈ E{sub g} , we observe gravitational collapse on those scales. Signatures of chemical abundance variations evolve differently for the gas phase and for the stellar population. For smooth flows, the forming cloud is well mixed, while its stellar population retains more information about the initial metallicities. For clumpy flows, the gas phase is less well mixed, while the stellar population has lost most of the information about its origin.

79 ASTRONOMY AND ASTROPHYSICS↗

Near-infrared spectroscopy for burning plasma diagnostic applications

Ultraviolet and visible (UV-VIS, 200-750 nm) atomic spectroscopy of neutral and ionized fuel species (H, D, T, and Li) and impurities (e.g., He, Be, C, and W) is a key element of plasma control and diagnosis on International Thermonuclear Experimental Reactor and future magnetically confined burning plasma experiments (BPXs). Spectroscopic diagnostic implementation and performance issues that arise in the BPX harsh nuclear environment in the UV-VIS range, e.g., degradation of first mirror reflectivity under charge-exchange atom bombardment (erosion) and impurity deposition, permanent and dynamic loss of window, and optical fiber transmission under intense neutron and {gamma}-ray fluxes, are either absent or not as severe in the near-infrared (NIR, 750-2000 nm) range. An initial survey of NIR diagnostic applications has been undertaken on the National Spherical Torus Experiment. It is demonstrated that NIR spectroscopy can be used for machine protection and plasma control applications, as well as contribute to plasma performance evaluation and physics studies. Emission intensity estimates demonstrate that NIR measurements are possible in the BPX plasma operating parameter range. Complications in the NIR range due to the parasitic background emissions are expected to occur at very high plasma densities, low impurity densities, and at high plasma-facing component temperatures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Toyota beamline (BL33XU) at SPring-8

The Toyota beamline (BL33XU) at SPring-8 is an undulator beamline developed to assist in the study of various automotive-related materials. The light source is a tapered in-vacuum undulator that provides a variable energy band width as well as a high brilliance X-ray beam. Two different optical arrangements are available: Optics 1 and Optics 2. Optics 1 is dedicated to time-resolved X-ray absorption spectroscopy (XAFS), and consists of two channel-cut crystal monochromators and four water-cooled flat Si mirrors. The Si(111) and Si(220) monochromator crystals cover an energy range of 4.0–46.0 keV and are driven by high-speed AC servo motors. These monochromators, in conjunction with the tapered undulator, enable high-quality XAFS data acquisition with a temporal resolution of 10 ms. Optics 2 is optimized for X-ray diffraction, scattering and imaging and includes a recently installed double crystal monochromator, two water-cooled flat Si mirrors and Kirkpatrick-Baez (KB) focusing mirrors. The monochromator incorporates parallel mounted Si(111) and Si(311) crystals and covers an energy range of 4.5–70 keV. The beamline provides two experimental stations: Exp. Hutch 2 and Exp. Hutch 3. The gas supply system and mass spectrometers installed in Exp. Hutch 2 allow in-operando measurements under various atmospheres. The scanning three-dimensional X-ray diffraction (scanning 3DXRD) microscopy instrumentation developed and installed in Exp. Hutch 3 enables non-destructive orientation and stress mapping of 1 mm-thick steel specimens using a high energy microbeam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Solar wind magnetic fluctuations and electron non-thermal temperature anisotropy: survey of Wind-SWE-VEIS observations

The solar wind electron velocity distribution function (eVDF) exhibits a variety of non-thermal features that deviate from thermal equilibrium. These deviations from equilibrium provide a local source for electromagnetic fluctuation emissions, including the commonly observed electron whistler-cyclotron and firehose instabilities. We present a systematic analysis of Wind-SWE-VEIS observations of solar wind electron plasma and associated Wind-MFI observed magnetic fluctuations. For the first time using the full solar wind electron distribution and its moments, without separation of the various electron components, we show clear evidence that the temperature anisotropy threshold of the parallel electron cyclotron anisotropic instability bounds solar wind electrons during slow solar wind periods. We also demonstrate that during periods of slow solar wind, collisions—while infrequent—are the dominant mechanism by which solar wind electrons are constrained, leading to isotropization. During fast solar wind periods, magnetic fluctuations and solar wind anisotropies are enhanced above the parallel whistler anisotropic threshold boundary and collisional effects are significantly reduced. Preliminary calculations further show that the oblique electron whistler mirror anisotropic instability bounds both the slow and fast solar wind. Regardless of speed, the solar wind electron thermal anisotropy appears globally bounded by the parallel electron firehose instability for anisotropies T{sub e⊥}/T{sub e||}<1. Our results indicate that collisions, while infrequent, play a necessary role in regulating the solar wind eVDFs. In striking contrast to solar wind ions, solar wind electron plasma, when considered globally as a single eVDF, is only marginally stable with respect to parallel propagating instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗

Design study of an edge current density diagnostic using new high-performance single-channel beam emission spectrometers at DIII-D

A novel Motional Stark Effect spectroscopy system has been designed for application at the DIII-D tokamak. The system is optimized for studies of the poloidal and toroidal magnetic field in the plasma pedestal region with frame rates of up to 10 kHz. Further, light from an existing high-photon-throughput collection lens is analyzed using four single-channel f/2.8 Czerny–Turner spectrometers that use custom-made lens systems instead of mirrors. Each spectrometer has two separate outgoing legs and is operated in a positive grating order, which allows for simultaneous observations of D-alpha and D-beta spectra. Forward modeling using the code FIDASIM shows a radial resolution of the system close to 0.6 cm and sufficiently good spectral resolution when masking the high throughput light collection lens in the horizontal direction to avoid overly strong Doppler broadening of beam emission lines. Moreover, a detailed sensitivity study considering realistic levels of readout and photon noise shows that the poloidal and toroidal magnetic field strengths can be inferred with an uncertainty of less than 1%, which will allow the inference of changes of the plasma current during transient events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A compact, high resolution energy, and emittance diagnostic for electron beams using active plasma lenses

High-resolution (sub-%), single-shot energy distribution, and emittance measurements of GeV-class electron beams generated by laser plasma accelerators (LPAs) have been enabled through the use of an active plasma lens combined with relatively short dipole magnets. This setup, with only 60 cm between the LPA source and the final diagnostic screen, was facilitated through the use of a replenishable ∼20–40 nm thick liquid crystal plasma mirror to separate remnant laser radiation from the electron beam without emittance degradation. As LPAs capable of generating GeV-class electron beams at cm-scale distances become increasingly ubiquitous, there is a need to supplement these compact accelerators with equally compact diagnostics.

Barber, S. K. (ORCID:0000000172518755)↗

Alpha Channeling in Mirror Machines

This Final Report for DE-FG02-06ER54851, Alpha Channeling in Mirror Machines, was in fact submitted on April 9, 2010. Some confusion arose because it was submitted as an initial progress report on a related grant, Alpha Channeling in Open- System Magnetic Devices. The original text is reproduced below, except that the publication record is undated. Note that the articles published in 2009 and 2010 reflect work in fact done under DE-FG02-06ER54851.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ACCELERATION OF THE SOLAR WIND BY ALFVEN WAVE PACKETS

A scale separation kinetic model of the solar wind acceleration is presented. The model assumes an isotropic Maxwellian distribution of protons and a constant influx of outward propagating Alfven waves with a single exponent Kolmogorov-type spectrum at the base of a coronal acceleration region ({approx}2 R {sub Sun }). Our results indicate that nonlinear cyclotron resonant interaction taking energy from Alfven waves and depositing it into mostly perpendicular heating of protons in initially weakly expanding plasma in a spherically non-uniform magnetic field is able to produce the typical fast solar wind velocities for the typical plasma and wave conditions after expansion to about 5-10 solar radii R {sub Sun }. The acceleration model takes into account the gravity force and the ambipolar electric field, as well as the mirror force, which plays the most important role in driving the solar wind acceleration. Contrary to the recent claims of Isenberg, the cold plasma dispersion only slightly slows down the acceleration and actually helps in obtaining the more realistic fast solar wind speeds.

79 ASTRONOMY AND ASTROPHYSICS↗

Theory for Cd 3 As 2 thin films in the presence of magnetic fields

Here we present a theory for thin films of the Dirac semimetal Cd 3 ⁢As 2 in the presence of magnetic fields. We show that, above a critical thickness, specific subbands n of thin film Cd 3 ⁢As 2 are in a quantum spin Hall insulator regime and study their response to in- and out-of-plane magnetic fields. We find that sufficiently large in-plane Zeeman fields drive the system toward a 2D Dirac semimetal regime, provided the field is directed perpendicular to a high-symmetry mirror plane. For other directions, we find the Dirac points to be weakly gapped. We further investigate how the system responds to finite out-of-plane field components, both starting from the quantum spin Hall regime at small in-plane fields and from the 2D Dirac semimetal regimes at larger in-plane fields, addressing recent experimental observations in A. C. Lygo et al. [Phys. Rev. Lett. 130, 046201 (2023)] and B. Guo et al. [Phys. Rev. Lett. 131, 046601 (2023)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Projected sensitivities of the LUX-ZEPLIN experiment to new physics via low-energy electron recoils

LUX-ZEPLIN is a dark matter detector expected to obtain world-leading sensitivity to weakly-interacting massive particles interacting via nuclear recoils with a ∼7-tonne xenon target mass. This paper presents sensitivity projections to several low-energy signals of the complementary electron recoil signal type: 1) an effective neutrino magnetic moment, and 2) an effective neutrino millicharge, both for 𝑝⁢𝑝-chain solar neutrinos, 3) an axion flux generated by the Sun, 4) axionlike particles forming the Galactic dark matter, 5) hidden photons, 6) mirror dark matter, and 7) leptophilic dark matter. World-leading sensitivities are expected in each case, a result of the large 5.6 t 1000 d exposure and low expected rate of electron-recoil backgrounds in the <100 keV energy regime. A consistent signal generation, background model and profile-likelihood analysis framework is used throughout.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Weyl semimetal in the rare-earth hexaboride family supporting a pseudonodal surface and a giant anomalous Hall effect

Rare-earth hexaborides offer a rich tapestry for exploring the interplay of topological orders, magnetism, and electron-correlation effects associated with protected quantum phenomena. Using first-principles modeling, we identify in cerium hexaboride (CeB 6 ) a topological state that harbors a pseudonodal surface (PNS) along with double-Weyl fermions. An analysis of the electronic states in the vicinity of the Fermi level reveals the presence of M z -mirror-symmetry-protected band crossings that involve itinerant (d) and localized (f) states of Ce. These band crossings are found to remain nearly gapless as one goes away from the mirror plane, driving the formation of PNS states. We also demonstrate the presence of coexisting double-Weyl fermions with chiral charges of ±2 on the C 4z rotational axis. By analyzing the Berry curvature field associated with the topological states, we predict that CeB 6 supports a giant anomalous Hall conductivity of -1840Ω -1 cm -1 in the slightly electron-doped regime, which would be larger than the values reported to date in magnetic Weyl semimetals. Our study thus indicates that CeB 6 , which combines ferromagnetic order with topological physics in a heavy-fermion matrix, would provide a promising playground for investigating topological magnetic states with giant anomalous Hall responses.

36 MATERIALS SCIENCE↗

Dynamics of Bottlebrush Polymers in Solution by Neutron Spin Echo Spectroscopy

In this work, we present dynamical and morphological studies on poly(dimethylsiloxane) (PDMS)-based bottlebrush polymers in solution. A combination of small-angle neutron scattering (SANS), pulsed field gradient nuclear magnetic resonance (PFG NMR), and neutron spin echo (NSE) spectroscopy was used to identify structural changes inherent in changing the side-chain length while keeping the backbone constant. These morphological changes are mirrored in the diffusion coefficient determined by PFG NMR, resulting in two coefficients for the elongated and one for the more spherical sample. Faster motions are tracked by NSE using the advantage of time- and length-scale resolutions with the diffusion coefficient predetermined by PFG NMR. Hereby, the sample with short side chains relaxes like wormlike micelles considering the longitudinal direction, whereas the dynamics along the radial extension shows a much stronger Q-dependence as known from any theory. The dynamical behavior within the blob region, covered with the more spherical sample, follows the predictions of Zimm as well as of Zilman and Granek (ZG).

36 MATERIALS SCIENCE↗

Spectrum of Weak Magnetohydrodynamic Turbulence

Turbulence of magnetohydrodynamic waves in nature and in the laboratory is generally cross-helical or nonbalanced, in that the energies of Alfven waves moving in opposite directions along the guide magnetic field are unequal. Based on high-resolution numerical simulations it is proposed that such turbulence spontaneously generates a condensate of the residual energy E{sub v}-E{sub b} at small field-parallel wave numbers. As a result, the energy spectra of Alfven waves are generally not scale invariant in an inertial interval of limited extent. In the limit of an infinite Reynolds number, the universality is asymptotically restored at large wave numbers, and both spectra attain the scaling E(k)propor tok{sub perpendicular}{sup -2}. The generation of a condensate is apparently related to the breakdown of mirror symmetry in nonbalanced turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostics: Chapter 8 of the special issue: on the path to tokamak burning plasma operation

This chapter presents the activity conducted by the ITPA topical group (TG) on Diagnostics over about the last 15 years. Following a general introduction of the ITER Diagnostics led by their measurement roles, the document is organized in several subchapters detailing the design support, research and development activity conducted by each of the specialist working groups (WGs) of the TG. Please note that the magnetic diagnostics were supported at the TG without a specific WG. Their status is included in the general introduction. In the following some highlights of the subchapter’s contents are provided. Recent advances in ITER first wall (FW) diagnostics for the measurements of plasma-metallic wall interaction in support of the ITER research plan are reported. An InfraRed imaging Video Bolometer for ITER has been developed and tested on several tokamaks to measure the radiated power loss. A laser-induced breakdown spectroscopy (LIBS) technique which utilizes a pulsed laser beam to ablate locally by forming a crater, will measure local tritium inventory in the FW material. Real-time Residual Gas Analyzers will measure the neutral gas composition in a divertor port and an equatorial port during plasma operation. Due to the full metallic FW environment, the plasma-wall interaction in ITER will face several challenges such as the compromised radiated power and divertor heat flux measurements by reflection. Ray tracing and analysis codes have been developed to eliminate and correct the effects of reflection in the measurements. The characteristics of the reflecting surfaces depending on the roughness and angle of the incidence have been measured by dedicated experiments, and the results were applied to the reflection elimination. For the measurement of the metallic impurity radiation induced by eroded metallic atoms, a vacuum ultraviolet spectrometer has been developed and tested. An extensive thermonuclear diagnostic suite will be required to support the operation of ITER and the planned experimental program for future burning plasma experiments. Due to the harsh environmental conditions, the implementation of diagnostic systems in ITER is a major challenge. These conditions include high levels of neutron and gamma fluxes, neutron heating, particle bombardment. Therefore, the selection and design of diagnostic systems must take into account a number of phenomena previously unseen in diagnostic design. For this reason, the measurement of neutrons and confined or lost fast ions, with particular emphasis on alpha particles, is critical to ITER. The diagnostics associated with these measurements will be important for future plasma-burning experiments at ITER. The high neutron emission and very large plasma size in ITER make neutron diagnostics the main diagnostic method used to measure plasma parameters such as fusion power, fusion power density, ion temperature, energy of fast ions and their spatial distributions in the plasma core. Active spectroscopy techniques are methods where a neutral particle beam is injected into the plasma and information on plasma parameters is extracted from the measurement of line emission resulting from the beam-plasma interaction, either by plasma ions or by beam atoms. Spatial localization is achieved by crossing the beamline and multiple observation lines. The ITER plasma will be a high temperature, moderately dense, fully ionized collisional plasma. The plasma facing surfaces are principally metallic being fashioned from beryllium or tungsten but many other elements, arising from either structural or from operational needs, may enter this plasma. The energy range of the emitted photons range from meV (infra-red) to multi keV (x-rays) and originate from all areas of the plasma volume. The primary role of passive emission diagnostics is to identify what is in the plasma from spectral signatures. Extracting quantitative information from these measurements such as impurity content, ion temperature, rotation, degree of detachment and radiated power depends on calibrated instruments, a physics model of the atomic and molecular processes and plasma transport and an analysis workflow that takes into account environmental effects such as reflections. The particular needs for ITER have prompted a multi-machine, many-year effort to address all these aspects and this chapter reviews the work on diagnostic design, experiments and new analysis techniques. An overview of the laser diagnostics to be implemented on ITER is also provided in this paper. This includes descriptions of the Thomson scattering in the core, edge and divertor regions, polarimetry and interferometry diagnostics used for measuring plasma density and also measurements of helium density in the divertor using Laser Induced Flourescence. Techniques which can allow improvements on current measurements are also addressed in particular expanding poloidal polarimetry measurements to measure field fluctuations and proposed use of dispersion interferometery which has a number of advantages over existing methods. This paper identifies particular areas where further research and testing on existing tokamaks is useful even at this advanced stage to inform the design of diagnostics for ITER. Outstanding areas of concern for the implementation of laser diagnostics, in particular with a view to reliable operation are identified. An overview of the latest developments of microwave diagnostic systems and techniques is given. The primary focus is the contributions for ITER—the next step burning plasma experiment—which is supplemented by describing recent progress of techniques applicable for fusion experiments beyond ITER. The contributions are intentionally kept concise, and are being supplemented by a rich list of references for further studies. Radiation induced effects are receiving continuous and well-deserved attention of the ITER diagnostic community and they are in many cases one of the primary design drivers of the ITER diagnostic systems. The paper summarizes recent progress in this area focusing primarily on the ITER diagnostics but in some cases provides also outlook for the possible solutions for even more demanding radiation environment of fusion reactors beyond ITER. Despite advancements in the area of modeling and simulation of various radiation induced effects, experimental testing in a nuclear environment as close as possible to the target one is still seen as unavoidable for proper qualification of particular diagnostic functional elements. Recent advancement within three diagnostic areas: optical diagnostics, magnetics and bolometers is covered. Encouraging results on qualification of silica glass vacuum window assemblies are presented. In the area of magnetic sensors, progress of irradiation tests performed on ITER in-vessel LTCC inductive sensors is presented with outlook for novel technological approaches to inductive sensors utilizing thick printing and photolithography technologies being highlighted. Summary of advancements in the area of steady state magnetic field sensors based on Hall effect is given. New results of neutron irradiation test of the ITER borosilicate glass inserts for vacuum electrical feedthroughs are summarized finding negligible swelling at target level of neutron fluence. Off-line irradiation tests of fiber optic current sensors for plasma current measurement demonstrated that both for gamma doses up to 5 MGy and a total neutron fluence up to 10 15 cm −2 , radiation induced changes are still compatible with required measurement accuracy on ITER. The ITER bolometers are given as an example how considering radiation effects may influence the diagnostic design. Finally, outlook for future main R&D directions is outlined. All optical and laser-based diagnostics in ITER will be using mirrors to guide plasma radiation toward detectors, cameras and sensors. In the hostile plasma, radiation and particle environment the optical characteristics of diagnostic mirrors will degrade directly affecting the entire performance of involved diagnostic systems. An assessment of factors affecting mirror performance is provided. Among the prime adverse factors are deposition of plasma impurities, sputtering of mirror surface and steam ingress in the vicinity of mirrors. Within the International Tokamak Physics Activity with active support by ITER central team and domestic agencies, the structured research and development (R&D) program on mitigation of risks for diagnostic mirrors is underway. Within this program the mirror material development, the passive mitigation of mirror degradation by using diagnostic ducts and shutters along with an active mirror recovery program comprising the in-situ mirror cleaning and calibration is underway. Recent developments in diagnostic mirror R&D are described in this Chapter along with an example of their implementation of R&D solutions in ITER Infrared Thermography diagnostic. An assessment of still open engineering and physics questions, considerations on mirror risks during an early phase of ITER operation are given along with an overview of diagnostic mirror evolution in the late ITER operation stage toward the demonstration fusion power plant. Several crucial areas of diagnostic R&D outlined in ITER Research Plan are addressed. The basic control groups in a fusion reactor can be broken-down in five categories: (1) plasma position, magnetic configuration, and plasma current control, (2) profile control and confinement optimization, (3) MHD control and suppression, (4) edge dissipation control, radiation and plasma exhaust control and (5) break-down optimization. These categories are coupled via the physics (a control action in one domain will affect the other domains) and via shared actuators (e.g. ECRH for impurity accumulation avoidance, current density distribution control and MHD suppression). Consequently, a supervisory control system should determine the priority of the various control tasks, their couplings, and the interfaces with the safety and interlock system. For the systematic development of the various controllers taking the complexity of the plasma and the control system into account, a model-based approach is required. A short historical overview is given of the developments in systems and control theory and control engineering with special emphasis on those developments that are most relevant for Nuclear Fusion research and operation. An overview is given of the state of the field of fusion plasma control for the control categories. It will be shown how synthetic diagnostics are being developed in ITER and how they are used in diagnostic design and design validation and how they can be in model-based controller synthesis using relatively simple models. In modern control methods, multiple diagnostics are used to constrain relatively simple models. The constrained models provide an estimate for the state. This opens the route to state controllers, such as model predictive control. A major challenge in nuclear fusion research is the coherent combination of data from heterogeneous diagnostics and modeling codes for machine control and safety as well as physics studies. Measured data from different diagnostics often provide information about the same subset of physical parameters. Additionally, information provided by some diagnostics might be needed for the analysis of other diagnostics. A joint analysis of complementary and redundant data allows, e.g. to improve the reliability of parameter estimation, to increase the spatial and temporal resolution of profiles, to obtain synergistic effects, to consider diagnostics interdependencies and to find and resolve data inconsistencies. Physics-based modeling and parameter relationships provide additional information improving the treatment of ill-posed inversion problems. A coherent combination of all kind of available information within a probabilistic framework allows for improved data analysis results. The concept of integrated data analysis (IDA) in the framework of Bayesian probability theory is outlined and contrasted with conventional data analysis. Components of the probabilistic approach are summarized and specific ingredients beneficial for data analysis at fusion devices are discussed.

ITER↗