Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FILM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Signatures of polarized chiral spin disproportionation in rare earth nickelates

In rare earth nickelates (RENiO 3 ), electron-lattice coupling drives a concurrent metal-to-insulator and bond disproportionation phase transition whose microscopic origin has long been the subject of active debate. Of several proposed mechanisms, here we test the hypothesis that pairs of self-doped ligand holes spatially condense to provide local spin moments that are antiferromagnetically coupled to Ni spins. These singlet-like states provide a basis for long-range bond and spiral spin order. Using magnetic resonant X-ray scattering on NdNiO 3 thin films, we observe the chiral nature of the spin disproportionated state, with spin spirals propagating along the crystallographic (101) ortho direction. These spin spirals are found to preferentially couple to X-ray helicity, establishing the presence of a hitherto-unobserved macroscopic chirality. The presence of this chiral magnetic configuration suggests a potential multiferroic coupling between the noncollinear magnetic arrangement and improper ferroelectric behavior as observed in prior studies on NdNiO 3 (101) ortho films and RENiO 3 single crystals. Experimentally constrained theoretical double-cluster calculations confirm the presence of an energetically stable spin-disproportionated state with Zhang-Rice singlet-like combinations of Ni and ligand moments

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Deconstruction of the Anisotropic Magnetic Interactions from Spin‐Entangled Optical Excitations in van der Waals Antiferromagnets

Magneto-optical excitations in antiferromagnetic d systems can originate from a multiplicity of light-spin and spin-spin interactions, as the light and spin degrees of freedom can be entangled. This is exemplified in van der Waals systems with attendant strong anisotropy between in-plane and out-of-plane directions, such as MnPS 3 and NiPS 3 films studied here. The rich interplay between the magnetic ordering and sub-bandgap optical transitions poses a challenge to resolve the mechanisms driving spin-entangled optical transitions, as well as the single-particle bandgap itself. Here, a high-fidelity ab initio theory is applied to find a realistic estimation of the bandgap by elucidating the atom- and orbital-resolved contributions to the fundamental sub-bands. It is further demonstrated that the spin-entangled excitations, observable as photoluminescence and absorption resonances, originate from an on-site spin-flip transition confined to a magnetic atom (Mn or Ni). The evolution of the spin-flip transition in a magnetic field is used to deduce the effective exchange coupling and anisotropy constants.

2D materials↗
NASA NTRS2001

A New Concept for Non-Volatile Memory: The Electric-Pulse Induced Resistive Change Effect in Colossal Magnetoresistive Thin Films

A novel electric pulse-induced resistive change (EPIR) effect has been found in thin film colossal magnetoresistive (CMR) materials, and has shown promise for the development of resistive, nonvolatile memory. The EPIR effect is induced by the application of low voltage (< 4 V) and short duration (< 20 ns) electrical pulses across a thin film sample of a CMR material at room temperature and under no applied magnetic field. The pulse can directly either increase or decrease the resistance of the thin film sample depending on pulse polarity. The sample resistance change has been shown to be over two orders of magnitude, and is nonvolatile after pulsing. The sample resistance can also be changed through multiple levels - as many as 50 have been shown. Such a device can provide a way for the development of a new kind of nonvolatile multiple-valued memory with high density, fast write/read speed, low power-consumption, and potential high radiation-hardness.

Liu, S. Q.↗
DOE OSTI2024

A high-frequency, low-power resonant radio-frequency neutron spin flipper for high-resolution spectroscopy

Here, we present a resonant-mode, transverse-field, radio-frequency (rf) neutron spin flipper design that uses high-temperature superconducting films to ensure sharp transitions between uniform magnetic field regions. Resonant mode allows for low-power, high-frequency operation but requires strict homogeneity of the magnetic fields inside the device. This design was found to efficiently flip neutrons at 96.6 ± 0.6% at an effective frequency of 4 MHz in bootstrap configuration with a beam size of 2.4 × 2.5 cm 2 and a wavelength of 0.4 nm. The high frequency and efficiency enable this device to perform high-resolution neutron spectroscopy with comparable performance with currently implemented rf flipper designs. The limitation of the maximum frequency was found due to the field homogeneity of the device. We numerically analyze the maximum possible efficiency of this design using a Bloch solver simulation with magnetic fields generated from finite-element simulations. We also discuss future improvements of the efficiency and frequency to the design based on the experimental and simulation results.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Hardware, methodology and applications of 2 + D backscatter Mössbauer spectroscopy with simultaneous x-ray and γ-ray detection

Abstract A unique method is presented for the acquisition and analysis of 57 Fe backscatter Mössbauer spectra with simultaneous detection of the resonant 14.4 keV γ -rays and the characteristic 6.4 keV x-rays, using a custom-built multi-parameter analyser constructed on the basis of commercial analogue to digital converters and high-speed digital latches. The system allows for the simultaneous registration of Doppler-modulation velocities and photon energies, with up to 4096 and 8192 digital channels respectively. This arrangement is in contrast to most related systems, which detect at a single narrow energy window per detector. Samples of arbitrary atomic structure, morphology and surface topography can be studied without altering the setup or the analysis procedure, provided that the samples are at least micrometre sized. The hardware and software that are used to acquire data with minimal dead time are described and the custom and self-contained methods for post-measurement energy discrimination, background correction and velocity-axis folding are discussed. The data are fit using a general Hamiltonian model for the nuclear energy levels of 57 Fe and a quantum mechanical description of the angular momentum coupling is utilised, with consideration of the crystalline and chemical disorder of the sample under examination. Three examples of distinct magnetic systems, with thicknesses ranging from 5 μ m to 6 mm, that were studied using this method are presented, these are: an amorphous CoFeB-based ribbon with ultra-soft coercivity for high-frequency applications, magnetically hard Nd-Fe-B thick films on Si substrates, examined in both as-deposited and annealed states, and a sample from the nickel-rich iron meteorite NWA 6259 that contains the atomically ordered, elevated coercivity, L 1 0 phase of FeNi, tetrataenite. The wide applicability and usefulness of this method is thus demonstrated on three distinct sample morphologies that required little to no surface preparation prior to examination.

Engineering↗
DOE OSTI2021

Design of flexible proton beam imaging energy spectrometers (PROBIES)

A simple repeating step-filtered structure has been designed and deployed for the detection of MeV-energy proton beams produced from high-intensity short-pulse laser-driven experiments. Due to the diagnostic's ability to recover energy-resolved images of proton beams, it is called the proton beam imager and energy spectrometer (or PROBIES). The flexible design has two useful applications. First, it can be fielded in a configuration with a scintillator and imaging setup in order to collect proton beam information in high-repetition rate experiments. Here we show a configuration that collects the equivalent of a nine-film radiochromic film (RCF) stack, and a technique for using a neural network (NN) to rapidly analyze the images on millisecond time-scales. Second, when using RCF stacks as the detector, the energy resolution capability is greatly increased compared to traditional RCF stacks, while simultaneously reducing the total number of films required to make each measurement. We demonstrate a configuration that provides up to 90 spatially- and energy-resolved datapoints using just ten films. Both designs presented here can be easily customized for anticipated experimental outputs and manufactured at low cost. Such designs allow for rapid prototyping using modern high-accuracy 3D printers or on-demand computer numerical control machining to reduce the reliance on time-consuming film media, analysis, or bulky electro-magnetically dispersing spectrometers. The analysis of data is discussed and a methodology for constructing a NN that is capable of rapidly analyzing data on-the-fly with greater than 95% accuracy is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quasi-one-dimensional Ising-like antiferromagnetism in the rare-earth perovskite oxide TbScO 3

The rare-earth perovskite TbScO 3 has been widely used as a substrate for the growth of epitaxial ferroelectric and multiferroic thin films, while its detailed low-temperature magnetic properties were rarely reported. In this paper, we performed detailed magnetization, specific heat, and single crystal neutron scattering measurements, along with the crystalline electric field calculations to study the low-temperature magnetic properties of TbScO 3. All our results suggest the magnetic Tb 3+ has an Ising-like pseudo-doublet ground state at low temperatures. Due to the constrain of local point symmetry, these Tb 3+ Ising moments are confined in the ab plane with a tilt angle of φ=±48° to the a axis. In zero field, the system undergoes an antiferromagnetic phase transition at T N =2.53 K, and forms a G x A y noncollinear magnetic structure below T N . Here, we find the dipole-dipole interactions play an important role to determine the magnetic ground state, which are also responsible for the quasi-one-dimensional magnetism in TbScO 3 . The significant anisotropic diffuse scatterings further confirm the quasi-one-dimensional magnetism along the c axis. The magnetic phase diagram with the field along the easy b axis is well established. In addition to the G x A y antiferromagnetic state, there is an exotic field-induced phase emerged near the critical field B c ≃0.7 T, where three-dimensional magnetic order is suppressed but strong one-dimensional correlations may still exist.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Low-Field EMR Studies of Permalloy Films and Gratings

Flat and profile-modulated permalloy films have been studied by the electron magnetic resonance (EMR) method. In addition to ferromagnetic and spin-wave resonances, the structures demonstrate low-field EMR signals of an unusual shape, which form a hysteresis loop in sweeping fields. The low-field signals are attributed to a fast reorientation of magnetic domains. The low-field EMR behavior is comparable to the behavior in magneto-dependent photovoltage previously observed in the optical experiments. The shapes of the loops and typical values of the switching fields depend on the profile modulation parameters confirming the possibility of controlling magnetic properties and the coupling of magnetic and optical effects with nanoscale geometry.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Laser recording on MnBi films

The results of laser recording experiments in which a magnetic field controls the magnetization distribution along Curie-point switched micron-wide tracks are described. These experiments showed that analog as well as digital information may be recorded in this manner.

Lewicki, G.↗
NASA NTRS1976

Analog data recording on MnBi film

High coercive-force films have reduced sensitivity to wall-domain motion and can record at higher spatial frequencies. Tracks switched in high coercive-force films have track widths independent of applied magnetic field. Upper spatial frequency limit recorded by Curie-point switching in alternating field is greater.

Guisinger, J. E.↗
NASA NTRS1999

High Temperature Superconductor/Semiconductor Hybrid Microwave Devices and Circuits

Contents include following: film deposition technique; laser ablation; magnetron sputtering; sequential evaporation; microwave substrates; film characterization at microwave frequencies; complex conductivity; magnetic penetration depth; surface impedance; planar single-mode filters; small antennas; antenna arrays phase noise; tunable oscillations; hybrid superconductor/semiconductor receiver front ends; and noise modeling.

Romanofsky, Robert R.↗
NASA NTRS2006

Electromagnetic energy coupling mechanism with matrix architecture control

The present invention relates generally to reconfigurable, solid-state matrix arrays comprising multiple rows and columns of reconfigurable secondary mechanisms that are independently tuned. Specifically, the invention relates to reconfigurable devices comprising multiple, solid-state mechanisms characterized by at least one voltage-varied parameter disposed within a flexible, multi-laminate film, which are suitable for use as magnetic conductors, ground surfaces, antennas, varactors, ferrotunable substrates, or other active or passive electronic mechanisms.

Knowles, Gareth↗
NASA NTRS2013

Motor for High Temperature Applications

A high temperature motor has a stator with poles formed by wire windings, and a rotor with magnetic poles on a rotor shaft positioned coaxially within the stator. The stator and rotor are built up from stacks of magnetic-alloy laminations. The stator windings are made of high temperature magnet wire insulated with a vitreous enamel film, and the wire windings are bonded together with ceramic binder. A thin-walled cylinder is positioned coaxially between the rotor and the stator to prevent debris from the stator windings from reaching the rotor. The stator windings are wound on wire spools made of ceramic, thereby avoiding need for mica insulation and epoxy/adhesive. The stator and rotor are encased in a stator housing with rear and front end caps, and rear and front bearings for the rotor shaft are mounted on external sides of the end caps to keep debris from the motor migrating into the bearings' races.

Roopnarine↗
DOE OSTI2019

Magnetoelastically actuated MEMS device and methods for its manufacture

A magnetoelastically actuated device includes a microscale cantilever arm supported at a standoff distance from a substrate. The cantilever arm is formed as a laminar magnetic actuator configured to bend when it is subjected to a magnetic field. The cantilever arm includes a film of magnetostrictive material. Also provided is a method for fabricating the magnetoelastically actuated device. The method includes defining an actuator mold in a layer of photoresist on a structural layer of the cantilever arm and electrodepositing a layer of a magnetostrictive alloy containing cobalt and iron onto the structural layer within the actuator mold.

36 MATERIALS SCIENCE↗
DOE OSTI2020

STRUCTURAL STABILITY OF MAGNETIC TUNNEL JUNCTION BASED MOLECULAR SPINTRONICS DEVICES (MTJMSD)

Harnessing the exotic properties of molecular level nanostructures to produce novel sensors, metamaterials, and futuristic computer devices can be technologically transformative. In addition, connecting the molecular nanostructures to ferromagnetic electrodes bring the unprecedented opportunity of making spin property based molecular devices. We have demonstrated that magnetic tunnel junction based molecular spintronics device (MTJMSD) approach to address numerous technological hurdles that have been inhibiting this field for decades. MTJMSD approach is based on producing a capacitor like a testbed where two metal electrodes are separated by an ultrathin insulator and subsequently bridging the molecule nanostructure across the insulator to transform a capacitor into a molecular device. Our prior work showed that MTJMSDs produced extremely intriguing phenomenon such as room temperature current suppression by six orders, spin photovoltaic effect, and evolution of new forms of magnetic metamaterials arising due to the interaction of the magnetic a molecule with two ferromagnetic thin films. However, making robust and reproducible electrical connections with exotic molecules with ferromagnetic electrodes is full of challenges and requires attention to MTJMSD structural stability. This paper focuses on MTJMSD stability by describing the overall fabrication protocol and the associated potential threat to reliability. MTJMSD is based on microfabrication methods such as (a) photolithography for patterning the ferromagnetic electrodes, (b) sputtering of metallic thin films and insulator, and (c) at the end electrochemical process for bridging the molecules between two ferromagnetic films separated by ~ 2nm insulating gap.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Disorder driven variations in magnetoresistance and planar Hall effect in Bi 2 Te 3 thin films

The degenerately doped sesquichalcogenide Bi 2 Te 3 , a well-known thermoelectric material, has attracted much attention in recent years as a topological insulator in which conducting surface states lead to exotic electronic transport. Here, in this study, we report the observation of anisotropic magnetoresistance (AMR) and planar Hall effect (PHE) in polycrystalline thin films of Bi 2 Te 3 over a broad range of temperature and magnetic field strength. The values of AMR, PHE and the Hall mobility (μ H ) are compared with results of similar measurements on single crystals and epitaxial films of Bi 2 Te 3 , where these properties are understood in the framework of electronic transport in the topologically protected conducting surface states. Our textured polycrystalline films show a robust metallic character with a carrier density (n s ) and mobility μ H of 9×10 20 cm -3 and 16.7 cm 2 V -1 s -1 respectively. This carrier density is higher and the mobility lower by an order of magnitude compared to the reported values of n s and μ H in epitaxial films and single crystals. However, we see a comparable AMR and PHE in our films for which the concept of conducting surface states is ill-defined due to their polycrystallinity and disordered structure. We suggest that an anisotropic backscattering of charge carriers in the strongly spin – orbit coupled electronic states of this heavy-metal-based non-magnetic compound may lead to the measured resistivity anisotropy. The observation of AMR and PHE in polycrystalline films may be important for scalable production of Bi 2 Te 3 based AMR and PHE sensors of magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Comparison of Metal Adhesion Layers for Au Films in Thermoplasmonic Applications

If thermoplasmonic applications such as heat-assisted magnetic recording are to be commercially viable, it is necessary to optimize both thermal stability and plasmonic performance of the devices involved. In this work, a variety of different adhesion layers were investigated for their ability to reduce dewetting of sputtered 50 nm Au films on SiO 2 substrates. Traditional adhesion layer metals Ti and Cr were compared with alternative materials of Al, Ta, and W. Film dewetting was shown to increase when the adhesion material diffuses through the Au layer. An adhesion layer thickness of 0.5 nm resulted in superior thermomechanical stability for all adhesion metals, with an enhancement factor of up to 200X over 5 nm thick analogues. The metals were ranked by their effectiveness in inhibiting dewetting, starting with the most effective, in the order Ta > Ti > W > Cr > AI. Finally, the Au surface-plasmon polariton response was compared for each adhesion layer, and it was found that 0.5 nm adhesion layers produced the best response, with W being the optimal adhesion layer material for plasmonic performance.

36 MATERIALS SCIENCE↗