Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIBS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An ultrathin solid-state electrolyte film coated on LiNi 0.8 Co 0.1 Mn 0.1 O 2 electrode surface for enhanced performance of lithium-ion batteries

We report layered Ni-rich oxide is a promising cathode material for lithium-ion batteries (LIBs) of high energy density, yet its poor electrochemical stability induced by electrode-electrolyte interfacial degradation has still needed to be addressed. Surface coating is one of the powerful techniques to tackle this issue, nevertheless, it has been extensively used on particle but not electrode regarding a larger area of protection. Herein, we have covered a nano-scaled layer of lithium phosphorus oxynitride (LiPON) on the electrode level of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM) surface and found lower impedance, longer cycle life, and better safety for treated battery. Most notably, such an NCM-LiPON based 1.3 Ah pouch cell delivers an energy density of 364.4 Wh kg -1 (based on positive and negative materials), along with the retention of 80.0% over 745 cycles at 0.5 C-rate, which is 1.3 times longer than the bare one. This results from modification of both superficial cathode-electrolyte interphase (CEI) and structure stabilization of general particle surface, therefore, role of conformal coating upon electrode surface should be highlighted.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Artificial cathode electrolyte interphase for improving high voltage cycling stability of thick electrode with Co-free 5 V spinel oxides

Spinel-type cathode LiNi 0.5 Mn 1.5 O 4 (LNMO) has intrigued the transportation industry due to its high operating voltage and total elimination of the expensive cobalt element. However, LNMO cathode with high mass loading (> 3 mAh/cm 2 in areal capacity) has suffered from excessive capacity degradation upon long cycling. Here, a robust Al 2 O 3 surface layer is introduced to the thick LNMO electrode via atomic layer deposition (ALD). The capacity retention in full cells with the graphite anode is improved from 46.3% to 75.3% after 300 cycles with cutoff voltage up to 4.85 V, while enabling average Coulombic efficiency of 99.9% during the cycling. The post-mortem analyses reveal that the Al 2 O 3 surface layer would convert to Al-O-F /Al-F species upon cycling, offering stable interphase to protect the cathode material. Furthermore, these results demonstrate the significance of surface modification enabling high voltage cathode for next-generation LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Modeling the 4D discharge of lithium-ion batteries with a multiscale time-dependent deep learning framework

The lithium-ion battery (LIB) field is moving towards the direction of investigating spatially resolved physical phenomena in the 3D porous microstructure of electrodes. These pore-scale simulations give new insights into the local dynamics of lithiation/de-lithiation and charge transport, Nevertheless, the computational time of these simulations limits the integration of these models in optimization workflows of cycling conditions or electrode manufacturing processes. Machine learning models present a way of assessing in real-time the performance of materials. While several successful techniques for replicating simulations with machine learning have been proposed, this case study presents a more demanding problem, due to the necessity of understanding the behavior of heterogeneous 3D local data, as it evolves in time: this poses both a scientific and a technical challenge. To this end, we propose an autoregressive multiscale convolutional neural network model to predict relevant quantities at the pore-scale in the solid phase: the lithium concentration (in the active material) and potential (in the active material and carbon binder). Here, these are ultimately used to reconstruct the battery discharge curve. 3D images of the electrode microstructures are the input to the network, trained with a dataset of finite element method simulations to predict the discharge behavior of the cathode side in lithium ion batteries. We propose this machine learning model as a proof-of-concept of the applicability of multiscale networks for time-dependent physics problems. The trained model exhibits very high accuracy (with errors lower than 2 %) in forecasting the discharge behavior of new unseen cathodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Networks of electrochemical oxidation of common lithium-ion Battery solvents revealed by NMR spectroscopy

Raising the upper cutoff voltage of lithium-ion batteries (LIBs) to increase energy density often exceeds the electrolyte’s anodic stability limit, accelerating degradation and creating a major durability tradeoff. Designing electrolytes that can sustain long-term high-voltage cycling requires a clearer understanding of the fundamental mechanisms occurring when commercial carbonate solvents oxidize. Here, to this end, simplified single-salt, single-solvent formulations of LiClO 4 and LiPF 6 in dimethyl carbonate (DMC), ethylene carbonate (EC), or ethyl methyl carbonate (EMC) were anodically electrolyzed on inert electrodes and monitored for extended periods of time using 1 H, 13 C, 19 F, and 35 Cl nuclear magnetic resonance (NMR) spectroscopy. The controlled environment of the experiments, coupled to the unique sensitivity of NMR, unveiled novel metastable intermediates and the formation of branching networks of products with temporal evolution. Oxidation of the pristine solvent primarily proceeds through a radical pathway that also produces highly reactive protons but faces competition from a second pathway involving a radical carbocation intermediate. In all cases, the intermediates follow a variety of downstream pathways that can intersect with each other. The concomitant network of reactions represents a significant increase in complexity compared to common descriptions in the literature, yet, critically, it helps explain the wide range of products typically identified in electrolyte oxidation in complete cells. The results highlight the need for refocusing fundamental research on anodic stability to analysis of the hierarchy of reaction networks to better inform efforts to mitigate the detrimental effects on battery performance, including prevention and harvesting of proton and radical products.

Electrolytes↗
DOE OSTI2023

Safety perceptions of solid-state lithium metal batteries

Safety concerns hamper the wide application of lithium-ion batteries (LIBs) in the fields of electric vehicles and stationary energy storage. As the blame of the battery thermal runway was widely cast on the flowable, volatile, and flammable nature of liquid organic electrolytes, solid-state lithium batteries with solid and nonflammable electrolytes are highly praised for potentially better safety characteristics. Furthermore, solid-state lithium metal batteries (SS-LMBs) may become an ultimate solution for safe, high-energy density batteries. Whether SS-LMBs are safe enough to meet emerging demands remains unclear, as recent publications have presented serious safety concerns at both the material and device levels. In conclusion, this review summarizes recent investigations into SS-LMB safety, and systematic analysis and discussion are provided in this discussion of the safety concerns of SS-LMBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Selective leaching and solvent extraction of Lithium from spent batteries

Pre-extracting Li from spent lithium-ion batteries (LIBs) is crucial because the recovery efficiency of Li is low after other critical metals have been extracted. Traditional methods involving black mass roasting followed by water leaching have resulted in the extraction of 76 % Li and 61 % Al. However, pre-leaching Li from pretreated black mass using an oxalic acid solution at both ambient and elevated temperatures significantly improved results, achieving 98.1 % Li, 99.5 % Al, and 100 % Fe extraction while leaving Ni, Co, Mn, and Cu behind under optimal conditions. Oxalic acid crystals were recovered by refrigerating the leach solution at temperatures below 5 °C and were reused with nearly identical leaching efficiency. Selective extraction of Li from the oxalate leach solution was achieved using Cyanex® 936P under optimal conditions. Here, due to its extremely low Li extraction efficiency, Dichloromethane proved unsuitable as a diluent. Comparative extraction tests using Cyanex® 936P, Cyanex® 272, and DEHPA in kerosene demonstrated that Cyanex® 936P is an excellent extractant for Li, effectively separating it from other impurities. Under optimal conditions, 98.8 % of available Li was extracted using 20 % Cyanex® 936P, compared to 51.1 % with Cyanex® 272 and 39.9 % with DEHPA in kerosene. Additionally, stripping Li from Cyanex® 936P using H 2 SO 4 and HCl was explored, with HCl yielding the best performance.

Black mass↗
DOE OSTI2026

Extraction of lithium from battery recycling wastewater using synergistic D2EHPA and TBP

The recycling of spent lithium-ion batteries (LIBs) poses significant challenges, including the generation of large volumes of chemically complex wastewater. The composition of this wastewater is influenced by both the intrinsic chemistry of the batteries and the specific recycling processes employed. Notably, this wastewater contains economically valuable components, such as lithium, which can be recovered. Here, in this study, a solvent extraction (SX) process was investigated as a method to recover lithium from battery recycling wastewater, especially from anode-washing stage. Initially, various commercial extractants were evaluated, including di(2-ethylhexyl)phosphoric acid (D2EHPA), mono-2-ethylhexyl (2-ethylhexyl)phosphonate (PC88A), bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272), 2-hydroxy-5-nonylacetophenone oxime (LIX 84-I), tri-butyl phosphate (TBP), and their combinations. Among these, D2EHPA + TBP demonstrated a synergism to advance and maximize the lithium extraction. Subsequently, the effects of key parameters, including D2EHPA concentration, TBP concentration, contact time, initial pH, and aqueous-to-organic (A/O) phase ratio, were systematically investigated and optimized. A two-stage SX approach was employed to enhance lithium recovery. Under the optimized conditions of 30.0 vol% D2EHPA, 10.0 vol% TBP, 10 min of contact time, and a 1:1 A/O phase ratio, a lithium extraction efficiency of more than 88% in a two-stage solvent extraction was achieved. Lithium was subsequently stripped from the loaded organic solution using sulfuric acid (H 2 SO 4 ). Using 2.0 M H 2 SO 4 , lithium stripping was achieved after two counter-current stripping stages at an organic-to-aqueous (O/A) phase ratio of 6:1. This stripping process enriched the lithium concentration by a factor of four compared to the original lithium concentration in the anode-washing wastewater. The recyclability of the synergistic D2EHPA + TBP system was also evaluated over four extraction-stripping cycles. The results demonstrated that the system maintained high extraction and stripping efficiencies.

D2EHPA↗
DOE OSTI2020

Concentration dependent properties and plastic deformation facilitate instability of the solid-electrolyte interphase in Li-ion batteries

Lithium-ion batteries (LIBs) often suffer from capacity fading and poor cyclic performance due to mechanical degradation of the solid-electrolyte interphase (SEI). Here we perform numerical simulations and theoretical analysis to elucidate the role of plasticity in wrinkling and ratcheting behaviors of an SEI/electrode system. A coupled diffusion and finite deformation framework is formulated and numerically implemented as a user-element subroutine (UEL) to describe transient lithium diffusion and accompanying elastic–viscoplastic deformation of the electrode. It is found that concentration dependent properties and plastic deformation facilitate wrinkling in such a system. A wrinkled morphology may further lead to ratcheting and related failure under cycling. A phase diagram of four types of cyclic behaviorsis identified in terms of the charging rate and time. Our analysis suggests several potential strategies to avoid wrinkling and ratcheting instabilities, such as charging/discharging the electrode at a sufficiently slow rate, and/or introducing a thick artificial SEI with a pre-tension.

25 ENERGY STORAGE↗
DOE OSTI2020

Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes

Lithium-ion battery (LIB) production can benefit both economically and environmentally from aqueous processing. Although these electrodes have the potential to surpass electrodes conventionally processed with N -methyl-2-pyrrolidone (NMP) in terms of performance, significant issues still exist with respect to ultra-thick cathodes ($\gg$4 mAh/cm 2 areal capacities). A major concern for these types of electrodes with high-nickel active material stems from lithium leaching from active material, which drives the pH of the dispersion in excess of 12 and subsequently corrodes the current collector interface. As this corrosion reaction proceeds, hydrogen generation at the interface creates bubbles which cause severe cracking in the dried electrode surface. When areal loadings are increased, this effect becomes more pronounced and is detrimental to both mechanical and electrochemical properties of these electrodes. In this work, a technique for mitigating corrosion at the current collector by adjusting the pH of the dispersion with the addition of phosphoric acid is investigated. Phosphoric acid was added in 0.5 wt% increments between 0.0 and 1.5 wt%, and effects on rheology, adhesion, corrosion, and electrochemical performance were investigated. A technique is reported for producing aqueous processed cathodes with areal loadings of 6–8 mAh/cm 2 with reduced surface cracking and superior high-rate discharge capacity (i.e. high-power performance) for this class of cathode loadings.

25 ENERGY STORAGE↗
DOE OSTI2022

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Atomic-scale tuned interface of nickel-rich cathode for enhanced electrochemical performance in lithium-ion batteries

The Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC6 22 ) is one promising cathode for lithium-ion batteries (LIBs), but suffers from poor cycling stability under high cutoff potentials. The performance degradation was reflected as capacity fading and voltage drop, having their roots in instable interface of NMC622. Aimed at improving interfacial stability, in this study, we deposited nanoscale ZrO 2 coatings conformally over NMC622 cathodes using atomic layer deposition (ALD). We found that, under a high cutoff voltage (4.5 V), the ALD ZrO 2 coatings evidently improved the performance of NMC622 cathode, showing better cyclability and higher sustainable capacity. In addition, the ALD coatings dramatically boosted the rate capability of NMC622. All these compelling performance results are ascribed to the atomic-scale tunable ZrO 2 coatings via ALD, which create stable interface and thereby inhibit unfavorable evolutions. In the study, we utilize a suite of characterization tools and various analyses to clarify the effects of ALD ZrO 2 coatings. This study will be helpful for improving the performance of nickel-rich cathodes via interfacial engineering using ALD.

25 ENERGY STORAGE↗
DOE OSTI2022

Interaction of beryllium with 316H stainless steel in molten Li 2 BeF 4 (FLiBe)

The increased demand in renewable energy resources has led to a renewed interest in nuclear reactors including a new generation of molten salt reactors. One of the issues encountered in handling of molten chloride or fluoride salts is the inability of metals to form and retain a protective oxide surface layer, generally chromium oxide. The low chromium content, nickel-based alloy INOR-8, later marketed as Hastelloy N, was specifically developed to contain molten fluorides. This alloy had some deficiencies, but its composition resulted in it incurring far less chromium depletion by the molten fluoride salts than alloys like 316 stainless steel. For the next generation of molten salt reactors, an alloy with pressure vessel code approval and higher temperature capability than Hastelloy N is required. Consequently, several reactor designers have reportedly chosen to build the reactor containment vessel from 316H stainless steel. In order to minimize corrosion of the stainless steel by the molten fluoride salt (2LiF-BeF 2 ), it is proposed to add beryllium metal to the salt to react with impurities and provide a means to lower the oxidation potential thus making the salt less corrosive. Even so, there is a concern whether the beryllium would react with components of the stainless steel. To address this concern, static capsule tests were conducted in which selected amounts of beryllium were added to capsules containing 2LiF-BeF 2 (FLiBe) salt and 316H stainless steel and Hastelloy N samples. Following exposure, the samples were cleaned and examined using a variety of analysis techniques including, optical microscopy, SEM-EDS, XPS, LIBS, XRD and EPMA. Tensile samples were also exposed in capsules, and those were subjected to tensile testing. Notably, It was found that for the level of beryllium additions used in this study, intermetallic compounds were formed which could be detrimental to the long-term performance of the 316H stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Battery aging mode identification across NMC compositions and designs using machine learning

A comprehensive understanding of lithium-ion battery (LiB) lifespan is the key to designing durable batteries and optimizing use protocols. Although battery lifetime prediction methods are flourishing, diagnosis of the root causes of aging and degradation have not yet been well developed nor studied for a broad mixture of designs and use cases. Here, we create a machine-learning (ML)-based framework that distinguishes aging modes using multiple electrochemical signatures recorded cycle-by-cycle. The predominant aging behaviors include a combination of loss of active materials in cathode (LAMPE) and a loss of Li inventory (LLI) in Li plating or solid electrolyte interphase (SEI) formation, manifested from 44 batteries representing two cathode chemistries, two electrode loadings, and five charging rates. Here, the aging mode classification accuracy is 86% using features within the first 50 cycles and increases to 88% beyond 225 cycles. The same features can quantify the percentage of end-of-life LAMPE with only 4.3% of error.

25 ENERGY STORAGE↗
DOE OSTI2023

Roll-to-roll solvent-free manufactured electrodes for fast-charging batteries

In response to the growing demand for lithium-ion batteries (LIBs), we demonstrate a solvent-free manufacturing technology that can avoid toxic organic solvents and form unique electrode structures to overcome the bottlenecks in low costs and fast charging. The lower tortuosity achieved by the open pores in the dry-printed (DP) electrode allows for a shorter Li+ diffusion pathway, which leads to better rate performance. The DP pouch cells exhibit higher capacity retention of 78% and 69% at 3C and 4C, respectively, compared with 67% and 52% for the slurry cast (SL) cells at the same rates. Moreover, the coating layer on the surface of active materials prevents the excess side reaction between active materials and electrolytes, which prolongs the cycle life of the DP cells. This manufacturing process is a roll-to-roll system with immense potential to be scaled up, providing a more efficient and economical way for battery manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evolution of the Rate-Limiting step: From Thin Film to Thick Ni-rich Cathodes

Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) has the attributes of high specific capacity (greater than 180 mAh g-1), high operating voltage (ca. 3.8 V) and low cost, which is therefore deemed as one of the most promising cathode candidates for next-generation high-energy Li-ion batteries (LIBs). However, challenges exist before the large-scale commercialization of Ni-rich cathode such as gas generation, capacity degradation especially at high rate or elevated temperatures. From thin film to densely pack high loading cathode, this work investigates the rate-limiting steps in Ni-rich cathodes e.g., phase structure, electronic and ionic conductivity to understand the reaction kinetics at different scales. This work provides new insights in understanding the electrochemical properties of Ni-rich cathode at different levels to inspire revolutionary ideas to address the fundamental issues of Ni-rich cathode from materials to relevant electrode levels.

Hu, Jiangtao↗
DOE OSTI2020

New Synthesis Strategies to Improve Co-Free LiNi0.5Mn0.5O2 Cathodes: Early Transition Metal d0 Dopants and Manganese Pyrophosphate Coating

In this work, we report solution-based doping and coating strategies to improve the electrochemical performance of the Co-free layered oxide cathode LiNi0.5Mn0.5O2 (LNMO). Small amounts of d0 dopants (e.g., Mo6+and Ti4+, 0.5-1 at. %) increase the cathode’s specific capacity, cycling stability, and rate capability. More specifically, a Mo-doped cathode with the nominal composition LiNi0.495Mn0.495Mo0.01O2 achieves a high reversible capacity of 180 mAh/g at 20 mA/g with good retention at higher rates (e.g., 120 mAh/g at 100 mA/g). Effects of 1 at.% Mo dopant on the cathode structure were studied using a suite of characterization tools including X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM). These measurements demonstrate that Mo6+ reduces Li+/Ni2+cation mixing and mitigates undesirable phase transformations near the cathode surface during cycling. This work also reports the use of an inorganic Mn2P2O7 coating which enhances cycling stability, presumably through formation of a stable cathode electrolyte interphase (CEI) layer. Overall, the synthesis approaches reported herein are quite general and can potentially be expanded to other high voltage LIB cathodes.

Co-free cathodes, d0 cation, pyrophosphate coating↗
DOE OSTI2021

Probing the electrolyte/electrode interface with vibrational sum frequency generation spectroscopy: A review

Over the past decades, Lithium-ion batteries have seen extensive improvements, and as a result are now the primary choice in many applications for their power, energy, and durability. In recent years, battery cost has reduced by orders of magnitude through adoption of new materials and processes. Despite these advances, interfaces in these battery systems are yet to be fully understood. This is seen as a major limitation to further increase cycle life, calendar life, abuse tolerance, and performances. A major obstacle is a lack of comprehensive understanding of the complex dynamic chemical processes occurring at the electrolyte/electrode interface. In this context, vibrational sum frequency generation (vSFG) spectroscopy possesses the unique capability of probing a molecularly thin interfacial layer to obtain molecular-level information through nonlinear optical interaction. Probing the molecular level processes at the interfaces using such a versatile technique would be a game changer in the advancement of current battery research knowledge. This review article summarizes recent vSFG studies on the electrolyte/electrode interface of various electrode materials and nonaqueous electrolytes for LIBs and discusses future research perspectives. Finally, overall, this focused review highlights the advantages and versatility of vSFG that can be used to further advance present-day battery research.

25 ENERGY STORAGE↗
DOE OSTI2021

Lithium substituted poly(amic acid) as a water-soluble anode binder for high-temperature pre-lithiation

Multifunctional binders hold great promise in advanced electrode designs for both fundamental research and practical utilization of lithium-ion batteries (LIBs). The reactions between Si/SiO x -dominated anodes with lithium are expected to be exothermic in principle, while the thermal tolerance along with the volume change makes high-temperature binders attractive for large scale roll-to-roll manufacturing. For instance, if a high temperature binder is also water soluble, it can be compatible with the current graphite-based anode manufacturing process. In this work, we present a water-soluble poly(amic acid)-based binder, which can withstand high temperature for industrial pre-lithiation process and effectively hold active materials together during repeated charge and discharge cycles. This lithium substituted poly(amic acid) binder (denoted as Li-Pa) can serve as a drop-in replacement for environmentally friendly electrode fabrication in large scale by providing aqueous solubility, exceptional thermal stability and mechanical flexibility.

25 ENERGY STORAGE↗