Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Chemical preintercalation of magnesium ions into ⍺-MoO 3 structure for improved electrochemical stability in Li-ion cells

Chemical preintercalation of layered materials, used as electrodes in intercalation-based energy storage devices, represents a promising strategy to enhance electrochemical stability and extend cycle life. However, standardized synthesis approaches for the chemical preintercalation of diverse ions into various layered materials are lacking, necessitating the development of specific synthesis routes for each ion and layered phase combination. In this study, we present the first successful demonstration of Mg 2+ ion chemical preintercalation into the interlayer region of α-MoO 3 , revealing its stabilizing effect during cycling in non-aqueous Li-ion cells. Using ethanol during hydrothermal treatment facilitated molybdenum reduction, which was critical for Mg 2+ ion preintercalation. Interestingly, we found that Mg preintercalation was accompanied by the incorporation of water. Mg-preintercalated α-MoO 3 exhibited enhanced charge storage capacity, electrochemical stability, and power capability compared to pristine α-MoO 3 electrodes. This improved performance is attributed to the structural stabilization provided by Mg 2+ pillars, which prevent undesirable phase transformations during repeated Li intercalation/deintercalation, and increased Li + ion diffusion due to the shielding of electrostatic interactions between electrochemically cycled ions and the α-MoO 3 lattice, enabled by structural water. In conclusion, our study offers new insights into developing chemical preintercalation synthesis approaches that can be broadly applied to a wide range of pillaring ions and layered material hosts.

25 ENERGY STORAGE↗

Decreased Sensitivity to Changes in the Concentration of Metal Ions as the Basis for the Hyperactivity of DtxR(E175K)

The metal-ion-activated diphtheria toxin repressor (DtxR) is responsible for the regulation of virulence and other genes in Corynebacterium diphtheriae. A single point mutation in DtxR, DtxR(E175K), causes this mutant repressor to have a hyperactive phenotype. Mice infected with Mycobacterium tuberculosis transformed with plasmids carrying this mutant gene show reduced signs of the tuberculosis infection. Corynebacterial DtxR is able to complement mycobacterial IdeR and vice versa. To date, an explanation for the hyperactivity of DtxR(E175K) has remained elusive. In an attempt to address this issue, we have solved the first crystal structure of DtxR(E175K) and characterized this mutant using circular dichroism, isothermal titration calorimetry, and other biochemical techniques. The results show that although DtxR(E175K) and the wild type have similar secondary structures, DtxR(E175K) gains additional thermostability upon activation with metal ions, which may lead to this mutant requiring a lower concentration of metal ions to reach the same levels of thermostability as the wild-type protein. The E175K mutation causes binding site 1 to retain metal ion bound at all times, which can only be removed by incubation with an ion chelator. The crystal structure of DtxR(E175K) shows an empty binding site 2 without evidence of oxidation of Cys102. The association constant for this low-affinity binding site of DtxR(E175K) obtained from calorimetric titration with Ni(II) is K{sub a} = 7.6 {+-} 0.5 x 10{sup 4}, which is very similar to the reported value for the wild-type repressor, K{sub a} = 6.3 x 10{sup 4}. Both the wild type and DtxR(E175K) require the same amount of metal ion to produce a shift in the electrophoretic mobility shift assay, but unlike the wild type, DtxR(E175K) binding to its cognate DNA [tox promoter-operator (toxPO)] does not require metal-ion supplementation in the running buffer. In the timescale of these experiments, the Mn(II)-DtxR(E175K)-toxPO complex is insensitive to changes in the environmental cation concentrations. In addition to Mn(II), Ni(II), Co(II), Cd(II), and Zn(II) are able to sustain the hyperactive phenotype. These results demonstrate a prominent role of binding site 1 in the activation of DtxR and support the hypothesis that DtxR(E175K) attenuates the expression of virulence due to the decreased ability of the Me(II)-DtxR(E175K)-toxPO complex to dissociate at low concentrations of metal ions.

36 MATERIALS SCIENCE↗

Kr Ion Irradiation Study of the Depleted-Uranium Alloys

Fuel development for the Reduced Enrichment Research and Test Reactor program is tasked with the development of new low-enriched uranium nuclear fuels that can be employed to replace existing highly enriched uranium fuels currently used in some research reactors throughout the world. For dispersion-type fuels, radiation stability of the fuel/cladding interaction product has a strong impact on fuel performance. Three depleted uranium alloys are cast for the radiation stability studies of the fuel/cladding interaction product using Kr ion irradiation to investigate radiation damage from fission products. SEM analysis indicates the presence of the phases of interest: U(Si, Al)3, (U, Mo)(Si, Al)3, UMo2Al20, U6Mo4Al43, and UAl4. Irradiations of TEM disc samples were conducted with 500 keV Kr ions at 200ºC to ion doses up to 2.5 × 1015 ions/cm2 (~ 10 dpa) with an Kr ion flux of 1012 ions/cm2-sec (~ 4.0 × 10-3 dpa/sec). Microstructural evolution of the phases relevant to fuel-cladding interaction products was investigated using transmission electron microscopy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Temperature-dependent void formation and growth at ion-irradiated nanocrystalline CeO 2 –Si interfaces

Ceria is a thermally stable ceramic that has numerous applications in the nuclear industry, including use in nuclear fuels and waste forms. Recently, interest has surged in nanostructured ceria due to its increased mechanical properties and electronic conductivity in comparison with bulk ceria and its ability to self-heal in response to energetic ion bombardment. Here, nanocrystalline ceria thin films grown over a silicon substrate are irradiated to fluences of up to ~4 × 10 16 ions/cm 2 under different irradiation conditions: with differing ion species (Si + and Ni + ), different ion energies (1.0–1.5 MeV), and at varying temperatures (160–600 K). Finally, while the nanocrystalline ceria is found to exhibit exceptional radiation resistance under all tested conditions, severe ion irradiation-induced mixing, void formation, and void growth are observed at the ceria/silicon interface, with the degree of damage proving to be temperature dependent.

Environmental Molecular Sciences Laboratory↗

Serpentine Ultralong Path with Extended Routing (SUPER) High Resolution Traveling Wave Ion Mobility-MS using Structures for Lossless Ion Manipulations

Ion mobility (IM) separations have a broad range of analytical applications, but insufficient resolution limits many applications. Here we report on traveling wave (TW) ion mobility (IM) separations in a Serpentine Ultra-long Path with Extended Routing (SUPER) Structures for Lossless Ion Manipulations (SLIM) module in conjunction with mass spectrometry (MS). The extended routing utilized multiple passes was facilitated by the introduction of a lossless ion switch at the end of the ion path that either directed ions to the MS detector or to another pass through the serpentine separation region, providing theoretically unlimited TWIM path lengths. Ions were confined in the SLIM by rf fields in conjunction with a DC guard bias, enabling essentially lossless TW transmission over greatly extended paths (e.g., ~1094 meters over 81 passes through the 13.5 m serpentine path). In this multi-pass SUPER TWIM provided resolution approximately proportional to the square root of the number of passes (or path length). More than 30-fold higher IM resolution for Agilent tuning mix m/z 622 and 922 ions (~340 vs. ~10) was achieved for 40 passes compared to commercially available drift tube IM and other TWIM-based platforms. An initial evaluation of the isomeric sugars Lacto-N-hexaose and Lacto-N-neohexaose showed the isomeric structures to be baseline resolved, and a new conformational feature for Lacto-N-neohexaose was revealed after 9 passes. The new SLIM SUPER high resolution TWIM platform has broad utility in conjunction with MS and is expected to enable a broad range of previously challenging or intractable separations.

Environmental Molecular Sciences Laboratory↗

Lowering the Activation Barriers for Lithium-Ion Conductivity through Orientational Disorder in the Cyanide Argyrodite Li6PS5CN

Rapid advancements in safe and high-energy-density energy storage are predicated on identifying new solid-state ion conductors with low activation energies and high ionic conductivities for all-solid-state battery technologies. Halide argyrodites are among some of the top candidates for solid-state electrolytes, as they can achieve ionic conductivities that approach liquid electrolytes. Incorporating dynamic pseudohalide species in argyrodite solid electrolytes presents an exciting opportunity to exploit lattice dynamics as a design principle to modulate the ion conduction properties of solid-state ion conductors. In the present study, we have prepared the new argyrodite Li 6 PS 5 CN containing orientationally disordered cyanide ions. The new cyanide argyrodite Li 6 PS 5 CN exhibits an activation barrier to Li-ion transport of 471 ± 25 meV and a room-temperature ionic conductivity of 6(2) × 10 –5 S cm –1 in comparison to the activation barrier of 502 ± 16 meV and an ionic conductivity of 2.3(1) × 10 –4 S cm –1 measured for the bromide analogue Li 6 PS 5 Br. Structural studies of both compounds by high-resolution X-ray diffraction indicate that Li 6 PS 5 CN and Li 6 PS 5 Br adopt nearly identical crystal structures with similar lattice parameters, which indicates that lower activation barriers in Li 6 PS 5 CN arise due to the cyanide ion itself rather than due to changes in the geometry of conduction pathways in the local lithium environment. The orientational disorder of the quadrupolar cyanide ion in Li 6 PS 5 CN points to a complex interplay of lattice polarizability and molecular dynamics that lower the activation barrier for lithium-ion conductivity in the cyanide argyrodite.

25 ENERGY STORAGE↗

Evolution of Ion–Ion Interactions and Structures in Smectic Ionic Liquid Crystals

Mixture of ionic liquid, 1,3-dimethylimidazolium 2-methoxy(2-ethoxy(2-ethoxy(2-ethoxy)))ethylphosphite ([DMIm][MPEGP]), and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), which forms an ionic liquid crystal with a superior ionic conductivity, evolves a smectic structure through ion–ion interactions as a function of LiTFSI concentration. Here, nuclear magnetic resonance (NMR) spectroscopy and pulsed field gradient (PFG) NMR examinations showed that the morphology of the structures and the strength of ion–ion interactions are closely related to the ratio of Li + /[MPEGP] – . The results revealed structures composed of Li + : [MPEGP] – : TFSI – (≈ 3 : 4 : 1) mainly by the Coulombic interactions between Li + cations and phosphite head groups in [MPEGP] – anions. NMR diffraction on PFG-echo profiles revealed a cluster size of ~ 2 µm, inversely proportional to the number of mobile [MPEGP] – anions, and an ion diffusion on the cluster surfaces that is 1000 times faster than that in the bulk liquid. These observations suggest that the superior ionic conductivity in the mixture is mainly due to the fast ion transport on the cluster surfaces of smectic ionic liquid crystals. The variations of diffusion ratios between mobile Li + , TFSI – , [DMIm] + , and [MPEGP] – ions indicate that these mobile ions remaining in the voids of structures preserve the bulk ionic liquid properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive Enhancement of Nanostructured Lithium-Ion Battery Cathode Materials via Conformal Graphene Dispersion

Efficient energy storage systems based on lithium-ion batteries represent a critical technology across many sectors including consumer electronics, electrified transportation, and a smart grid accommodating intermittent renewable energy sources. Nanostructured electrode materials present compelling opportunities for high-performance lithium-ion batteries, but inherent problems related to the high surface area to volume ratios at the nanometer-scale have impeded their adoption for commercial applications. Here, we demonstrate a materials and processing platform that realizes high-performance nanostructured lithium manganese oxide (nano-LMO) spinel cathodes with conformal graphene coatings as a conductive additive. The resulting nanostructured composite cathodes concurrently resolve multiple problems that have plagued nanoparticle-based lithium-ion battery electrodes including low packing density, high additive content, and poor cycling stability. Moreover, this strategy enhances the intrinsic advantages of nano-LMO, resulting in extraordinary rate capability and low temperature performance. With 75% capacity retention at a 20C cycling rate at room temperature and nearly full capacity retention at -20 degrees C, this work advances lithium-ion battery technology into unprecedented regimes of operation.

25 ENERGY STORAGE↗

Efficient generation of energetic ions in multi-ion plasmas by radio-frequency heating

Here we describe a new technique for the efficient generation of high-energy ions with electromagnetic ion cyclotron waves in multi-ion plasmas. The discussed ‘three-ion’ scenarios are especially suited for strong wave absorption by a very low number of resonant ions. To observe this effect, the plasma composition has to be properly adjusted, as prescribed by theory. We demonstrate the potential of the method on the world-largest plasma magnetic confinement device, JET (Joint European Torus, Culham, UK), and the high-magnetic-field tokamak Alcator C-Mod (Cambridge, USA). The obtained results demonstrate efficient acceleration of 3 He ions to high energies in dedicated hydrogen–deuterium mixtures. Simultaneously, effective plasma heating is observed, as a result of the slowing-down of the fast 3 He ions. The developed technique is not only limited to laboratory plasmas, but can also be applied to explain observations of energetic ions in space-plasma environments, in particular, 3 He-rich solar flares.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusioosmotic flow reversals due to ion–ion electrostatic correlations

Existing theories of diffusioosmosis have neglected ion–ion electrostatic correlations, which are important in concentrated electrolytes. Here, we develop a mathematical model to numerically compute the diffusioosmotic mobilities of binary symmetric electrolytes across low to high concentrations in a charged parallel-plate channel. We use the modified Poisson equation to model the ion–ion electrostatic correlations and the Bikerman model to account for the finite size of ions. We report two key findings. First, ion–ion electrostatic correlations can cause a unique reversal in the direction of diffusioosmosis. Such a reversal is not captured by existing theories, occurs at ≈ 0.4 M for a monovalent electrolyte, and at a much lower concentration of ≈ 0.003 M for a divalent electrolyte in a channel with the same surface charge. This highlights that diffusioosmosis of a concentrated electrolyte can be qualitatively different from that of a dilute electrolyte, not just in its magnitude but also its direction. Second, we predict a separate diffusioosmotic flow reversal, which is not due to electrostatic correlations but the competition between the underlying chemiosmosis and electroosmosis. This reversal can be achieved by varying the magnitude of the channel surface charge without changing its sign. However, electrostatic correlations can radically change how this flow reversal depends on the channel surface charge and ion diffusivity between a concentrated and a dilute electrolyte. Furthermore, the mathematical model developed here can be used to design diffusioosmosis of dilute and concentrated electrolytes, which is central to applications such as species mixing and separation, enhanced oil recovery, and reverse electrodialysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of different plasma species (atomic N, metastable N{sub 2}*, and ions) on the optical properties of dilute nitride materials grown by plasma-assisted molecular-beam epitaxy

This letter studies the effects of atomic N, metastable N{sub 2}*, and ionic species on the optical properties of dilute nitride materials. Ga{sub 0.8}In{sub 0.2}N{sub 0.01}As{sub 0.99} was grown using a 1% N{sub 2} in Ar gas mix from an Applied-Epi Unibulb rf plasma source. Isonitrogen samples with and without ions were studied using various plasma operating conditions. Optical emission spectrometry was used to characterize relative proportions of different active nitrogen plasma species (atomic N and metastable N{sub 2}*). Samples grown without ions and with a higher proportion of atomic N resulted in the best overall material quality, although this improvement was observed at high annealing temperatures. At lower annealing temperatures, increased blueshifts were observed for samples grown with a higher proportion of atomic N; however, there was no noticeable influence of ions on blueshift regardless of whether atomic N or metastable N{sub 2}* was the dominant species present in the plasma. The key implication of this work is that it helps to elucidate a possible reason for some of the contradictory reports in the literature. The ions are not solely responsible for the commonly reported ''plasma damage.'' Furthermore, we demonstrate herein that atomic N and metastable N{sub 2}* each have different effects on the optical properties of dilute nitride materials grown by plasma-assisted molecular-beam epitaxy.

36 MATERIALS SCIENCE↗

Surface Production of Negative Ions by Positive Ions and Atoms in the Electron Suppressor Region

A simple model of the production of negative ions by positive ions and atoms from the source plasma striking a caesiated surface is presented. The model combines calculated flux rates for the ions and atoms at a surface with negative ion yields to determine the surface production rates. The model takes into account the relative potential between the plasma and the electron suppressor in calculating the surface production rates. By making the assumption that the surface production rates can be directly compared with the extracted beam current then the model is compared with data where the beam current has been measured as a function of electron suppressor bias and knowledge of the plasma parameters of the source also exists. At high bias voltages relative to the plasma potential only volume produced negative ions can be extracted as negative ions created on the surface cannot cross the sheath. The model reproduces features of the ion current dependence on electron suppressor bias. At high bias voltages where negative ions cannot leave the surface there is still an enhancement of the non-caesiated performance which may be attributed to volume production enhancement due to the presence of caesium in the plasma. This has implications for the replacement of caesium with other low work function materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-acoustic shocks with self-regulated ion reflection and acceleration

Here, an analytic solution describing an ion-acoustic collisionless shock, self-consistently with the evolution of shock-reflected ions, is obtained. The solution extends the classic soliton solution beyond a critical Mach number, where the soliton ceases to exist because of the upstream ion reflection. The reflection transforms the soliton into a shock with a trailing wave and a foot populated by the reflected ions. The solution relates parameters of the entire shock structure, such as the maximum and minimum of the potential in the trailing wave, the height of the foot, as well as the shock Mach number, to the number of reflected ions. This relation is resolvable for any given distribution of the upstream ions. In this paper, we have resolved it for a simple “box” distribution. Two separate models of electron interaction with the shock are considered. The first model corresponds to the standard Boltzmannian electron distribution in which case the critical shock Mach number only insignificantly increases from M ≈ 1:6 (no ion reflection) to M ≈ 1:8 (substantial reflection). The second model corresponds to adiabatically trapped electrons. They produce a stronger increase, from M ≈ 3:1 to M ≈ 4:5 . The shock foot that is supported by the reflected ions also accelerates them somewhat further. A self-similar foot expansion into the upstream medium is described analytically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of nanoparticle-ion and nanoparticle-polymer interactions on ion transport and viscoelastic properties of polymer electrolytes

We use atomistic simulations to probe the ion conductivities and mechanical properties of polyethylene oxide electrolytes containing Al{sub 2}O{sub 3} nanoparticles. We specifically study the influence of repulsive polymer-nanoparticle and ion-nanoparticle interactions and compare the results with those reported for electrolytes containing the polymorph β-Al{sub 2}O{sub 3} nanoparticles. We observe that incorporating repulsive nanoparticle interactions generally results in increased ionic mobilities and decreased elastic moduli for the electrolyte. Our results indicate that both ion transport and mechanical properties are influenced by the polymer segmental dynamics in the interfacial zones of the nanoparticle in the ion-doped systems. Such effects were seen to be determined by an interplay between the nanoparticle-polymer, nanoparticle-ion, and ion-polymer interactions. In addition, such interactions were also observed to influence the number of dissociated ions and the resulting conductivities. Within the perspective of the influence of nanoparticles on the polymer relaxation times in ion-doped systems, our results in the context of viscoelastic properties were consistent with the ionic mobilities. Overall, our results serve to highlight some issues that confront the efforts to use nanoparticle dispersions to simultaneously enhance the conductivity and the mechanical strength of polymer electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li + solvation and kinetics of Li + –BF 4 - /PF 6 - ion pairs in ethylene carbonate. A molecular dynamics study with classical rate theories

Using our polarizable force-field models and employing classical rate theories of chemical reactions, we examine the ethylene carbonate (EC) exchange process between the first and second solvation shells around Li+ and the dissociation kinetics of ion pairs Li+-[BF4] and Li+-[PF6] in this solvent. We calculate the exchange rates using transition state theory and correct them with transmission coefficients computed by the reactive flux; Impey, Madden, and McDonald approaches; and Grote-Hynes theory. We found the residence times of EC around Li+ ions varied from 70 to 450 ps, depending on the correction method used. We found the relaxation times changed significantly from Li+-[BF4] to Li+-[PF6] ion pairs in EC. Our results also show that, in addition to affecting the free energy of dissociation in EC, the anion type also significantly influence the dissociation kinetics of ion pairing. This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. The calculations were carried out using computer resources provided by the Office of Basic Energy Sciences.

Chang, Tsun-Mei↗

Probing ion species separation and ion thermal decoupling in shock-driven implosions using multiple nuclear reaction histories

Simultaneously measured DD, DT, and D 3 He reaction histories are used to probe the impacts of multi-ion physics during the shock phase of inertial confinement fusion implosions. In these relatively hydrodynamiclike (burn-averaged Knudsen number ⟨N K ⟩ ~0.3) shock-driven implosions, average-ion hydrodynamic DUED simulations are able to reasonably match burnwidths, nuclear yields, and ion temperatures. However, kinetic-ion FPION simulations are able to better simulate the timing differences and time-resolved reaction rate ratios between DD, DT, and D 3 He reactions. FPION simulations suggest that the D 3 He/DT reaction rate ratio is most directly impacted by ion species separation between the 3 He and T ions, whereas the D 3 He/DD reaction rate ratio is affected by both ion species separation and ion temperature decoupling effects.

Hydrodynamic codes↗

Electrical conductivity, ion pairing, and ion self-diffusion in aqueous NaCl solutions at elevated temperatures and pressures

We have performed classical molecular dynamics (MD) simulations of aqueous sodium chloride (NaCl) solutions from 298 to 674 K at 200 bars to understand the influence of ion pairing and ion self-diffusion on electrical conductivity in high-temperature/high-pressure salt solutions. Conductivity data obtained from the MD simulation highlight an apparent anomaly, namely, a conductivity maximum as temperature increases along an isobar, which has been also observed in experimental studies. By examining both velocity autocorrelation and cross-correlation terms of the Green-Kubo integral, we quantitatively demonstrate that the conductivity anomaly arises mainly from a competition between the single-ion self-diffusion and the contact ion pair formation. The velocity autocorrelation function in conjunction with structural analysis suggests that diffusive motion of ions is suppressed at high temperatures due to the persistence of an inner hydration shell. Here, the contribution of velocity cross-correlation functions between oppositely charged ions becomes significant at the onset of the conductivity decrease. Structural analysis based on Voronoi tessellation and pair correlation functions indicates that the fraction of contact ion pairs increases as temperature increases. Spatial decomposition of the electrical conductivity also indicates that the formation of contact ion pairs significantly decreases the electrical conductivity compared to Nernst-Einstein conductivity, but the contribution of distant opposite charges cannot be ignored except at the highest temperature due to unscreened long-range interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗