Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact Scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Anharmonic Exciton‐Phonon Coupling in Metal‐Organic Chalcogenides Hybrid Quantum Wells

Abstract In contrast to inorganic quantum wells, hybrid quantum wells (HQWs) based on metal‐organic semiconductors are characterized by relatively soft lattices, in which excitonic states can strongly couple to lattice phonons. Therefore, understanding the lattice's impact on exciton dynamics is essential for harnessing the optoelectronic potential of HQWs. Beyond 2D metal halide perovskites, layered metal‐organic chalcogenides (MOCs), which are an air‐stable, underexplored material class hosting room‐temperature excitons, can be exploited as photodetectors, light emitting devices, and ultrafast photoswitches. Here, the role of phonons in the optical transitions of the prototypical MOC [AgSePh] ∞ is elucidated. Impulsive stimulated Raman scattering (ISRS) allows the detection of coherent exciton oscillations driven by Fröhlich interaction with low‐energy optical phonons. Steady state absorption and Raman spectroscopies reveal a strong exciton‐phonon coupling (Huang‐Rhys parameter ≈1.7) and its anharmonicity, manifested as a nontrivial temperature‐dependent Stokes shift. The ab initio calculations support these observations, hinting at an anharmonic behavior of the low‐energy phonons <200 cm −1 . These results untangle complex exciton‐phonon interactions in MOCs, establishing an ideal testbed for room‐temperature many‐body phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Complexion dictated thermal resistance with interface density in reactive metal multilayers

Multilayers composed of aluminum (A1) and platinum (Pt) exhibit a non-monotonic trend in thermal resistance with bilayer thickness as measured by time domain thermoreflectance. The thermal resistance initially increases with reduced bilayer thickness only to reach a maximum and then decrease with further shrinking of the multilayer period. These observations are attributed to the evolving impact of an intermixed amorphous complexion approximately 10 nm in thickness, which forms at each boundary between Al- and Pt-rich layers. Scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy find that the elemental composition of the complexion varies based on bilayer periodicity as does the fraction of the multilayer composed of this interlayer. These variations in complexion mitigate boundary scattering within the multilayers as shown by electronic transport calculations employing density functional theory and non-equilibrium Green's functions on amorphous structures obtained via finite temperature molecular dynamics. The lessening of boundary scattering reduces the total resistance to thermal transport leading to the observed non-monotonic trend thereby highlighting the central role of complexion on thermal transport within reactive metal multilayers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Neutron capture-induced nuclear recoils as background for CE$v$⁢NS measurements at reactors

Nuclear reactors represent a promising neutrino source for CE⁢v⁢NS (coherent-elastic neutrino-nucleus scattering) searches. However, reactor sites also come with high ambient neutron flux. Neutron capture-induced nuclear recoils can create a spectrum that strongly overlaps the CEv⁢NS signal for recoils ≲100 eV for nuclear reactor measurements in silicon or germanium detectors. This background can be particularly critical for low-power research reactors providing a moderate neutrino flux. Here, in this work we quantify the impact of this background and show that, for a measurement 10 m from a 1 MW reactor, the effective thermal neutron flux should be kept below ~7 × 10 –4 ⁢n/cm 2 s so that the CE⁢v⁢NS events can be measured at least at a 5⁢σ level with germanium detectors in 100 kg yr exposure time. This flux corresponds to 60% of the sea-level flux but needs to be achieved in a nominally high-flux (reactor) environment. Improved detector resolution can help the measurements, but the thermal flux is the key parameter for the sensitivity of the experiment. For silicon detectors, the constraint is even stronger and thermal neutron fluxes must be near an order of magnitude lower. This constraint highlights the need of an effective thermal neutron mitigation strategy for future low threshold CEv⁢NS searches. In particular, the neutron capture-induced background can be efficiently reduced by active veto systems tagging the deexcitation gamma following the capture.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Impact of further-range exchange and cubic anisotropy on magnetic excitations in the fcc kagome antiferromagnet IrMn 3

Here, this work investigates the effects of further neighbor exchange and cubic anisotropy on the magnetic excitations of the fcc kagome antiferromagnet IrMn 3 . Spin wave frequencies are calculated using the torque equation and the dynamical structure factor S(Q,ω) is determined by a Green's function method as an extension of our previous work [LeBlanc et al. Phys. Rev. B 90, 144403 (2014)]. These spin wave calculations are compared with inelastic neutron scattering data of polycrystalline IrMn 3 , where magnetic Mn ions occupy lattice sites of ABC-stacked kagome planes. The data are best explained by a spin wave model including exchange interactions up to fourth nearest neighbor and strong cubic anisotropy, as previously predicted by density functional theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Impact of Two-Body Currents on Semi-Exclusive Lepton-Nucleus Reactions

We generalize the spectral-function formalism to describe two-nucleon knockout processes in exclusive kinematics. Significant improvements are introduced both in the treatment of the current operators entering the $Δ$-current contribution and in the modeling of correlations between the two struck nucleons, including a consistent treatment of isospin dependence and the explicit incorporation of angular correlations. The framework is validated through comparisons with relativistic Fermi-gas calculations and with semi-exclusive electron-nucleus scattering data. Our results demonstrate that an accurate description of nuclear dynamics plays a crucial role in modeling this reaction mechanism. We further present a study of selected electroweak observables relevant to neutrino-scattering experiments.

Rocco, N. [Fermilab; Valencia U., IFIC] (ORCID:000↗
DOE OSTI2026

Impact of Two-Body Currents on Semi-Exclusive Lepton-Nucleus Reactions

We generalize the spectral-function formalism to describe two-nucleon knockout processes in exclusive kinematics. Significant improvements are introduced both in the treatment of the current operators entering the $Δ$-current contribution and in the modeling of correlations between the two struck nucleons, including a consistent treatment of isospin dependence and the explicit incorporation of angular correlations. The framework is validated through comparisons with relativistic Fermi-gas calculations and with semi-exclusive electron-nucleus scattering data. Our results demonstrate that an accurate description of nuclear dynamics plays a crucial role in modeling this reaction mechanism. We further present a study of selected electroweak observables relevant to neutrino-scattering experiments.

Rocco, N. [Fermilab; Valencia U., IFIC] (ORCID:000↗
DOE OSTI2026

Impact of Two-Body Currents on Semi-Exclusive Lepton-Nucleus Reactions

We generalize the spectral-function formalism to describe two-nucleon knockout processes in exclusive kinematics. Significant improvements are introduced both in the treatment of the current operators entering the $Δ$-current contribution and in the modeling of correlations between the two struck nucleons, including a consistent treatment of isospin dependence and the explicit incorporation of angular correlations. The framework is validated through comparisons with relativistic Fermi-gas calculations and with semi-exclusive electron-nucleus scattering data. Our results demonstrate that an accurate description of nuclear dynamics plays a crucial role in modeling this reaction mechanism. We further present a study of selected electroweak observables relevant to neutrino-scattering experiments.

Rocco, N. [Fermilab; Valencia U., IFIC] (ORCID:000↗
DOE OSTI2026

Impact of Two-Body Currents on Semi-Exclusive Lepton-Nucleus Reactions

We generalize the spectral-function formalism to describe two-nucleon knockout processes in exclusive kinematics. Significant improvements are introduced both in the treatment of the current operators entering the $Δ$-current contribution and in the modeling of correlations between the two struck nucleons, including a consistent treatment of isospin dependence and the explicit incorporation of angular correlations. The framework is validated through comparisons with relativistic Fermi-gas calculations and with semi-exclusive electron-nucleus scattering data. Our results demonstrate that an accurate description of nuclear dynamics plays a crucial role in modeling this reaction mechanism. We further present a study of selected electroweak observables relevant to neutrino-scattering experiments.

Rocco, N. [Fermilab; Valencia U., IFIC] (ORCID:000↗
DOE OSTI2021

Remote Sensing of Electric Fields Observed Within Winter Precipitation During the 2020 Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) Field Campaign

Aircraft electric fields from NASA's Lightning Instrument Package (LIP) were coupled with other airborne and ground-based, and in situ measurements to understand electrification in winter clouds that did not produce lightning. The measurements were made during seven research flights by a NASA ER-2 during the 2020 Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) campaign. Observed total electric field magnitudes were as high as 80 V m -1 and variability in the electric field was observed along the flight path of the ER-2, indicating horizontal and/or vertical inhomogeneity in the cloud's electrical structure. X-band airborne radar data indicated 20-dBZ echo tops above 5 km in regions where electrification exceeded 10 V m -1 . In these regions, 85-GHz brightness temperatures (TB) from an airborne radiometer were lower than 265 K, with the lowest T B (~210 K) associated with ice scattering collocated with the strongest electric fields. In situ microphysical measurements from the NASA P-3 aircraft on February 7 indicated that regions near strong electric field contained supercooled water, rimed ice hydrometeors, ice water p- content as high as 1 g m -3 , liquid water content as high as 0.15 g m -3 , and supersaturation as high as 3.5%. Furthermore, these observations support the role of mixed phase microphysics in the generation of electric fields in clouds. In three case studies, ground based S-band polarimetric radar observed depolarization streaks in differential reflectivity near areas where the strongest electrification was observed. This observation reinforces the utility of depolarization streaks to identify areas of electrification prior to lightning occurrence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Validating the simulation of beam-ion charge exchange in MAST Upgrade

Abstract Simulation of the impact of charge-exchange (CX) reactions on beam ions in the Mega Amp Spherical Tokamak (MAST) Upgrade was compared to measurements carried out with a fission chamber (neutron fluxes) and a fast ion deuterium-alpha (FIDA) diagnostic. A simple model was developed to reconstruct the outer-midplane neutral density based on measurements of deuterium-alpha emission from edge neutrals, and on Thomson scattering measurements of electron density and temperature. The main computational tools used were the ASCOT orbit-following code and the FIDASIM code for producing synthetic FIDA signals. The neutral density reconstruction agrees qualitatively with SOLPS-ITER modelling and yields a synthetic passive FIDA signal that is consistent with measurement. When CX losses of beam ions are accounted for, predicted neutron emission rates are quantitatively more consistent with measurement. It was necessary to account for CX losses of beam ions in simulations to reproduce the measured passive FIDA signal quantitatively and qualitatively. The results suggest that the neutral density reconstruction is a good approximation, that CX with edge neutrals causes significant beam-ion losses in MAST Upgrade, typically 20% of beam power, and that the ASCOT fast-ion CX model can be used to accurately predict the redistribution and loss of beam ions due to CX.

Physics↗
DOE OSTI2022

The Dark Energy Survey Supernova Program results: type Ia supernova brightness correlates with host galaxy dust

ABSTRACT Cosmological analyses with type Ia supernovae (SNe Ia) often assume a single empirical relation between colour and luminosity (β) and do not account for varying host-galaxy dust properties. However, from studies of dust in large samples of galaxies, it is known that dust attenuation can vary significantly. Here, we take advantage of state-of-the-art modelling of galaxy properties to characterize dust parameters (dust attenuation AV, and a parameter describing the dust law slope RV) for 1100 Dark Energy Survey (DES) SN host galaxies. Utilizing optical and infrared data of the hosts alone, we find three key aspects of host dust that impact SN cosmology: (1) there exists a large range (∼1–6) of host RV; (2) high-stellar mass hosts have RV on average ∼0.7 lower than that of low-mass hosts; (3) for a subsample of 81 spectroscopically classified SNe there is a significant (>3σ) correlation between the Hubble diagram residuals of red SNe Ia and the host RV that when corrected for reduces scatter by $\sim 13{{\ \rm per\ cent}}$ and the significance of the ‘mass step’ to ∼1σ. These represent independent confirmations of recent predictions based on dust that attempted to explain the puzzling ‘mass step’ and intrinsic scatter (σint) in SN Ia analyses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Comparison of methods to estimate aerosol effective radiative forcings in climate models

Abstract. Uncertainty in the effective radiative forcing (ERF) of climate primarily arises from the unknown contribution of aerosols, which impact radiative fluxes directly and through modifying cloud properties. Climate model simulations with fixed sea surface temperatures but perturbed atmospheric aerosol loadings allow for an estimate of how strongly the planet's radiative energy budget has been perturbed by the increase in aerosols since pre-industrial times. The approximate partial radiative perturbation (APRP) technique further decomposes the contributions to the direct forcing due to aerosol scattering and absorption and to the indirect forcing due to aerosol-induced changes in cloud scattering, amount, and absorption, as well as the effects of aerosols on surface albedo. Here we evaluate previously published APRP-derived estimates of aerosol effective radiative forcings from these simulations conducted in the sixth phase of the Coupled Model Intercomparison Project (CMIP6) and find that they are biased as a result of two large coding errors that – in most cases – fortuitously compensate. The most notable exception is the direct radiative forcing from absorbing aerosols, which is more than 40 % larger averaged across CMIP6 models in the present study. Correcting these biases eliminates the residuals and leads to better agreement with benchmark estimates derived from double calls to the radiation code. The APRP method – when properly implemented – remains a highly accurate and efficient technique for diagnosing aerosol ERF in cases where double radiation calls are not available, and in all cases it provides quantification of the individual contributors to the ERF that are highly useful but not otherwise available.

58 GEOSCIENCES↗
DOE OSTI2023

Probing single-chain conformation and its impact on the optoelectronic properties of donor–accepter conjugated polymers

The chain conformation of donor–acceptor conjugated polymers (D–A CPs) is critical to their optical and electronic properties. However, probing the conformation of D–A CPs (e.g., persistence length and contour length) at a single-chain level is challenging due to the formation of aggregates in dilute solution, even in a good solvent. In this work, we studied the chain conformation and corresponding optical spectra for high-performance D–A CPs in the single-chain state by multimodal variable-temperature scattering and spectroscopy techniques, as well as by molecular dynamics simulations. Here we found a critical role of the side-chain length and branch point in the persistence length and optical absorption due to steric effects. Hence, it is important to consider both the chain rigidity and coplanarity of the polymer backbone to achieve desirable optoelectronic properties. Our findings bridge the fundamental knowledge gaps to design new CPs with desired optoelectronic properties via molecular engineering for next-generation electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Wet Brush Homopolymers as “Smart Solvents” for Rapid, Large Period Block Copolymer Thin Film Self-Assembly

The spontaneous formation of periodic nanopatterns through the self-assembly of block copolymer (BCP) thin films offers an enticing path to engineer functional material properties over large areas, but the prohibitively slow ordering of ultrahigh molecular weight BCPs that generate large pattern periods (>100 nm) severely restricts the design space in which BCPs may be used. Here, we demonstrate that blending lamellae-forming polystyrene-block-poly(methyl methacrylate) diblock copolymers with very low molecular weight polystyrene and poly(methyl methacrylate) homopolymers can reduce by an order-of-magnitude the times required to form ordered large period patterns through solvent vapor annealing. Using in situ grazing-incidence small-angle X-ray scattering and ex situ electron microscopy, we show that the added homopolymer plasticizers act as a “smart solvent”: They increase the mobility of the long BCP chains by amplifying the dilution effect during solvent vapor annealing but segregate to like domains during subsequent thermal annealing to produce high-quality patterns with periods that may exceed 200 nm, which are readily transferred to other materials. The dramatic impact of homopolymer plasticizers may help extend the use of BCPs into new areas, particularly for visible light photonic applications that demand larger period nanopatterns.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Clash of Titans: the impact of cluster mergers in the galaxy cluster red sequence

ABSTRACT Merging of galaxy clusters are some of the most energetic events in the Universe, and they provide a unique environment to study galaxy evolution. We use a sample of 84 merging and relaxed SPT galaxy clusters candidates, observed with the Dark Energy Camera in the 0.11 < z < 0.88 redshift range, to build colour–magnitude diagrams to characterize the impact of cluster mergers on the galaxy population. We divided the sample between relaxed and disturbed, and in two redshifts bin at z = 0.55. When comparing the high-z to low-z clusters we find the high-z sample is richer in blue galaxies, independently of the cluster dynamical state. In the high-z bin, we find that disturbed clusters exhibit a larger scatter in the red sequence, with wider distribution and an excess of bluer galaxies compared to relaxed clusters, while in the low-z bin we find a complete agreement between the relaxed and disturbed clusters. Our results support the scenario in which massive cluster halos at z < 0.55 galaxies are quenched as satellites of another structure, i.e. outside the cluster, while at z ≥ 0.55 the quenching is dominated by in situ processes.

Aldás, Franklin (ORCID:0000000290215114)↗
DOE OSTI2023

Arctic Aerosol Sources and Mixing States Field Campaign Report

The Arctic is warming at a faster rate than anywhere else on Earth, with rapidly shrinking sea ice extent transforming the region. Depending on chemical and physical properties, atmospheric aerosols directly scatter and/or absorb radiation, serve as cloud droplet and/or ice crystal nuclei, and/or reduce the reflectiveness of the snow surface, thereby altering the atmospheric energy budget. There is a wide spread in the magnitude of simulated arctic aerosol radiative forcing, and significant differences in aerosol concentration levels and seasonal cycles often exist between models and observations. Increasing local natural and anthropogenic emissions are significant, with uncertain climate impacts due to complex feedbacks. Model evaluations, however, are limited by the dearth of arctic aerosol observations available and an inadequate understanding of arctic aerosol processes. The majority of previous arctic aerosol observations have been made through intensive spring/summer field campaigns, with few intensive measurement studies focused on the fall-winter transition, a period when freeze-up is occurring later and thinning sea ice is resulting in wintertime ice fracturing. Aerosol monitoring at arctic coastal stations has provided knowledge of long-term seasonal trends in aerosol concentrations. The completed ARM field campaign addresses observational and knowledge gaps through detailed aerosol size and chemical composition measurements during the fall-winter transition in the coastal Arctic and through the entire annual cycle in the central Arctic. The observations are improving our understanding of the sources and processes controlling the aerosol population in the rapidly changing Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Examining the EMC effect using the ${F}_{2}^{n}$ neutron structure function

The persistently mysterious deviations from unity of the ratio of nuclear target structure functions to those of deuterium as measured in deep inelastic scattering (often termed the “EMC effect”) have become the canonical observable for studies of nuclear medium modifications to free nucleon structure in the valence regime. The structure function of the free proton is well known from numerous experiments spanning decades. The free neutron structure function, however, has remained difficult to access. Recently it has been extracted in a systematic study of the global data within a parton distribution function extraction framework and is available from the CTEQ–Jefferson Lab (CJ) Collaboration. Here, we leverage the latter to introduce a new method to study the EMC effect in nuclei by reexamining existing data in light of the the magnitude of the medium modifications to the free neutron and proton structure functions independently. From the extraction of the free neutron from world data, it is possible to examine the nuclear effects in deuterium and their contribution to our interpretation of the EMC effect. In this study, we observe that the ratio of the deuteron to the sum of the free neutron and proton structure functions has some x B and Q 2 dependencies that impact the magnitude of the EMC effect as typically observed. Specifically, different EMC slopes are obtained when data from different x B and Q 2 values are utilized. Furthermore, while a linear correlation persists between the EMC and short range correlation effects, the slope is modified when deuteron nuclear effects are removed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Solute diffusion behavior during heat treatment and its impact in Sc-microalloyed Al-Cu system

Scandium (Sc) is a promising microalloying element that enhances the strength and thermal stability of aluminum (Al) alloys. However, these benefits are not fully realized in aluminum-copper (Al-Cu) systems, and corrosion resistance often declines due to the complex phase evolution and diffusion behavior of Cu and Sc. Here, to clarify this, solute diffusion behavior and Cu-Sc interaction during heat treatment (HT) were investigated using in situ synchrotron-based transmission x-ray microscopy (TXM), wide-angle x-ray scattering (WAXS), and x-ray absorption near-edge structure (XANES) spectroscopy. The results, supported by electron microscopy, reveal strong Cu-Sc bonding that significantly impedes solute diffusion, leading to inhomogeneous solute distribution and non-uniform precipitation. Moreover, the Al-Cu-Sc eutectic phase exhibits high thermal stability, resisting dissolution even near the matrix liquidus. These findings quantitatively elucidate the sluggish diffusion kinetics of Cu and Sc, which can help redesign HT schedules to improve both mechanical properties and corrosion resistance in Sc-microalloyed Al-Cu alloys.

36 MATERIALS SCIENCE↗