Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IGNEOUS ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Temporal relationships among lunar crustal rocks

Temporal relationships among the three most common suites of lunar crustal rocks have been investigated by obtaining new high precision ages on Felsic/Alkali-suite Quartz monzodiorite Clast B from breccia 15405 and Magnesian-suite norite 78235/6/8/55/56 and comparing them to previously dated ferroan anorthosite sample 60025. The weighted average age of 4337.19 ± 0.49 Ma of 15405 Clast B is defined by zircon U-Pb and Pb-Pb ages as well as mineral isochron Sm-Nd and Nd-Nd ages. It is identical to the weighted average age for Apollo 17 norite 78235/6/8/55/56 of 4334.1 ± 3.5 Ma which is defined by Pb-Pb ages measured on baddeleyites in this investigation and less precise Pb-Pb and Sm-Nd ages reported in the literature. Both ages are ∼ 25 Ma younger than the weighted average of Sm-Nd and Pb-Pb ages reported in the literature on ferroan anorthosite 60025 of 4359.3 ± 2.3 Ma. The fact that ages of all three samples are defined by multiple U-Pb, Pb-Pb, Sm-Nd, and 142 Nd- 143 Nd chronometers provide confidence that they record the igneous crystallization history of the samples and do not represent disturbances or mixing lines with no temporal significance. Here, the extent to which these three ages represent broader scale magmatism is difficult to evaluate. Nevertheless, the age defined for 15405 Clast B, 78235/6/8/55/56, and 60025 are contemporaneous with the peak of ages observed in detrital zircons from the Apollo 12, 14, 15, and 17 landing sites (4340 ± 20 Ma), a Mg-suite Sm-Nd whole rock isochron defined by samples from Apollo 14, 15, 16, and 17 landing sites (4348 ± 25 Ma), and a Ferroan Anorthosite-suite Sm-Nd whole rock isochron defined by samples from the Apollo 15 and 16 landing sites (4354 ± 29 Ma). This implies that Ferroan Anorthosite-suite magmatism is temporally distinct and earlier than magmatism associated with the Mg-suite and the Felsic/Alkali-suite, as predicted by the lunar magma ocean model of lunar differentiation. The short 35 ± 10 Ma interval between primary ferroan anorthosite magmatism and secondary magmatism suggests that the lunar crust formed over a limited period of time. Although heat from decay of long-lived isotopes, large impacts, tidal heating associated with interactions between the Earth and Moon, and density driven overturn of the magma ocean have all been invoked to explain production of ancient secondary crustal magmatism, only tidal heating and cumulate overturn are consistent with the apparent short duration of secondary crustal magmatism and the great depth of crystallization implied for some Mg-suite samples. The initial ε 143 Nd values derived from the 15405 Clast B and 78238 Mg-suite norite isochrons, as well as a Mg-suite whole rock isochron are −0.23 ± 0.11, −0.27 ± 0.74, and −0.25 ± 0.09, respectively. They are identical within uncertainty indicating that Mg-suite and Felsic/Alkali-suite magmas were derived from materials that had the same time averaged Sm/Nd ratios since the formation of the solar system. This, combined with the contemporaneous nature of 15405 Clast B and 78235/6/8/55/56 Mg-suite norite, is consistent with evolution of both samples, and likely both magma suites, from a common source through closed system fractional crystallization or partial melting processes.

Chronology↗
DOE OSTI2020

Intrinsic Elastic Anisotropy of Westerly Granite Observed by Ultrasound Measurements, Microstructural Investigations, and Neutron Diffraction

Westerly granite (WG) has been generally accepted as an isotropic homogeneous rock. Here, we return to WG and observe significant elastic anisotropy using multidirectional ultrasonic sounding on spherical samples at pressures up to 400 MPa. Thermal treatment of WG leads to formation of microcracks that reduce elastic wave velocities and increase its elastic anisotropy. The 3D distribution of P-wave velocities at low pressure is close to orthorhombic symmetry. Application of hydrostatic pressure closes most of thermally induced microcracks and decreases elastic anisotropy of WG, but at high pressure the anisotropy is practically reversed compared to low pressure: maximum P-wave velocity direction at low pressures is near minimum velocity direction at high pressure and vice versa. To understand this effect, microstructures of the rock were investigated by optical and scanning electron microscopy. Preferred orientations of four major rock-forming minerals—quartz, orthoclase, plagioclase, and biotite—were measured by time-of-flight neutron diffraction, which confirms significant crystal alignment. All these data were used to numerically model anisotropic elastic properties of WG. It is shown that WG possesses weak intrinsic elastic anisotropy related mainly to the preferred orientation of feldspars formed during igneous crystallization. Observed microcracks are mostly related to the cleavage planes of feldspars and biotite, and thus also demonstrate preferred orientation. Higher preheating temperatures produce larger quantity of longer microcracks. A numerical model shows that these microcracks act against the weak intrinsic elastic anisotropy of WG, and define the elastic anisotropy at low pressures.

58 GEOSCIENCES↗
NASA NTRS2006

Mineralogy of nakhlite Martian meteorites: Implications for their relative burial depths

Nakhlites are Martian cumulate rocks mainly composed of augite with variable amounts of olivine and groundmass (mesostasis). Currently seven samples are known: Nakhla (Nak), Governador Valadares (GV), Lafayette (Laf), NWA817, Y000593 (Y), NWA998 and MIL03346 (MIL). All the nakhlites show a similar unbrecciated cumulate texture, and their identical crystallization and exposure ages suggest that they originated from the same igneous body on Mars and were ejected by the same impact event. It is important to study difference of their mineralogy to reconstruct the igneous body from which nakhlites originated. Augite grains in all nakhlites have a nearly identical core composition (En39Fs22Wo39) and have thin Fe-rich rims. These Fe-rich rims are zoned to Ca-poor pyroxene compositions and the degree of chemical zoning varies from one sample to another. NWA998 has the most Mg-rich edge composition. The edge composition becomes more Fe-rich in the order of Laf, Nak/GV, Y and NWA817. Unlike other samples, the Fe-rich edge of MIL augite is zoned to the hedenbergite composition. Olivine grains in all samples except Laf and NWA998 show extensive chemical zoning whose degree is clearly related to the chemical zoning of pyroxenes. MIL and NWA817 have the widest compositional ranges (Fa54-93). Y has a slightly narrower compositional range of Fa58-85. Nak and GV have even narrower ranges (Fa58-72). In contrast to these samples, olivines in Laf and NWA998 are homogeneous (Fa66-67 and Fa61-62, respectively). Such chemical zoning (Fa and Ca) can be used to quantitatively estimate their cooling rates (burial depths) because it was clearly formed by interaction with the intercumulus melt. The obtained burial depths are 1-2 m for NWA817, 4 m for MIL, 7 m for Y, approx.10 m for Nak and GV, and >30 m for Laf and NWA998. This order is clearly related to the degree of pyroxene chemical zoning. The abundance and mineralogy of nakhlite groundmass are also consistent with this order. In Nak, GV and Laf, the groundmass abundance is about 7-8%. Y and NWA998 have a slightly higher abundance (10%), while NWA817 and MIL have much higher abundance (20-24%). The groundmass texture is also related to its abundance. The groundmass of Nak, GV, Laf and Y is mainly composed of feldspar laths. In contrast, NWA817 and MIL have glassy mesostasis without feldspar crystals. In NWA998, feldspar is a large blocky crystal with clear twinning, suggesting that it is even deeper than Laf.

Mikouchi, T.↗
NASA NTRS1976

Apollo 17, Station 6 boulder sample 76255 - Absolute petrology of breccia matrix and igneous clasts

The matrix of 76255 is the finest-grained, most clast-laden, impact-melt polymict breccia sampled from the Station 6 boulder. The paper speculates on how the matrix of 76255 fits into and enhances existing thermal models of breccia lithification. Emphasis is on the detailed petrology of five lithic clasts, two of which display mineralogical and textural affinities to mare basalts, while three, a gabbro, a norite, and a troctolite are considered primitive plutonic rocks.

Warner, J. L.↗
NASA NTRS1999

Experimental Studies of Mars-Analog Brines

Evaporite deposits may represent significant sinks of mobile cations (e.g., those of Ca, N, Mg, and Fe) and anions (e.g., those of C, N, S, and Cl) among the materials composing the Martian surface and upper crust. Carbon and nitrogen are especially interesting because of their role as atmospheric gases which can become incorporated into crustal rocks. However, the nature of evaporite precursor brines formed under Martian conditions is poorly understood. To date, only a very limited number of laboratory investigations have been reported which have any bearing on a better understanding of various processes related to brine or evaporite formation on Mars. Here we report on preliminary laboratory experiments that exposed igneous minerals analogous to those in Martian (Shergottites, Nakhlites, and Chassigny (SNC) group) meteorites to a simulated Martian atmosphere and pure, deoxygenated water. Analysis of the water over intervals of time approaching 1 year showed that atmospheric gases dissolved to form carbonate and nitrate ions while minerals dissolved to form sulfate and chloride along with various cations. On an annual basis, ion formation gave a carbonate/sulfate ratio that is comparable to the ratio found among salts in SNC meteorites. The sulfate/chloride ratio of the experimental brines is higher than in SNC meteorites but lower than in surface soils measured at the Viking and Pathfinder landing sites.

Moore, Jeffrey M.↗
NASA NTRSDate not supplied

Phase Transitions and Melting in the Venusian Basaltic Crust: Implications for Crustal Recycling

Understanding phase transitions and melting in the Venusian crust and the associated changes in density are critical to constrain crustal thickness, recycling, and remelting processes. For example, average surface conditions on Venus of 92 bars and 460 °C correspond to low-grade metamorphic conditions on Earth equivalent to hornfels- and greenschist-facies. Further, the primary igneous mineralogy in the Venusian crust should be replaced by metamorphic minerals over time and potentially melt, as temperatures and pressures increase with depth along geothermal gradients. Here, we use Perple_X (Connolly, 2005), a Gibbs free energy minimization program to calculates table phase equilibria over a range of pressure and temperature conditions for whole-rock compositions of a dry basalt, alkali basalt, and peridotite. Further, we extract mineral abundancies along five geotherms of 5, 10, 15, 20 and 25 °C/km and calculate the rock density after the extraction of melt. On the coldest geotherm of 5 °C/km, melting would start at ~ 197 km and ~121 km in the basalt and alkali basalt, respectively, and therefore at depths that significantly exceed the estimated thickness of the Venusian crust (8-25 km). A density cross-over, where the crustal density would exceed that of the mantle could potentially induce delamination and is estimated to occur at ~ 40 km for both compositions. On the 10 °C/km geotherm, melting of the basalt starts at 65 km and melt extraction only causes a gradual densification due the formation of initially lower melt proportions. In contrast, the alkali basalt starts to melt at a depth of ~ 57 km and the subsequent densification of the residual composition could trigger delamination at ~ 60km depth. For hotter geotherms (i.e., 25 °C/km gradient), melting would occur at shallower depths of 21 – 23 km. However, the basalt will not get significantly denser than the mantle while the residuum of the alkali basalt would reach a density cross-over at 30 km. Hence, differences in Venusian crustal compositions can significantly influence the thickness of the crust on individual geotherms. Our results demonstrate that phase transitions and melting are strongly dependent on the assumed geotherm and could, combined with geodynamic models, further constrain crustal parameters.

Julia Semprich↗
NASA NTRS2014

Gale Crater and Impact Processes - Curiosity's First 364 Sols on Mars

Impact processes at all scales have been involved in the formation and subsequent evolution of Gale crater. Small impact craters in the vicinity of the Curiosity MSL landing site and rover traverse during the 364 Sols after landing have been studied both from orbit and the surface. Evidence for the effect of impacts on basement outcrops may include loose blocks of sandstone and conglomerate, and disrupted (fractured) sedimentary layers, which are not obviously displaced by erosion. Impact ejecta blankets are likely to be present, but in the absence of distinct glass or impact melt phases are difficult to distinguish from sedimentary/volcaniclastic breccia and conglomerate deposits. The occurrence of individual blocks with diverse petrological characteristics, including igneous textures, have been identified across the surface of Bradbury Rise, and some of these blocks may represent distal ejecta from larger craters in the vicinity of Gale. Distal ejecta may also occur in the form of impact spherules identified in the sediments and drift material. Possible examples of impactites in the form of shatter cones, shocked rocks, and ropy textured fragments of materials that may have been molten have been observed, but cannot be uniquely confirmed. Modification by aeolian processes of craters smaller than 40 m in diameter observed in this study, are indicated by erosion of crater rims, and infill of craters with aeolian and airfall dust deposits. Estimates for resurfacing suggest that craters less than 15 m in diameter may represent steady state between production and destruction. The smallest candidate impact crater observed is ∼0.6 m in diameter. The observed crater record and other data are consistent with a resurfacing rate of the order of 10 mm/Myr; considerably greater than the rate from impact cratering alone, but remarkably lower than terrestrial erosion rates.

Curiosity↗
NASA NTRS1988

Growth of the lower continental crust

One of the largest uncertainties in crustal composition and growth models is the nature of the lower continental crust. Specifically, by what processes is it formed and modified, and when is it formed, particularly in reference to the upper crust? The main reason for this lack of information is the scarcity of lower crustal rock samples. These are restricted to two types: rocks which outcrop in granulite facies terrains and granulite facies xenoliths which are transported to the earth's surface by young volcanics. The important conclusions arising from the xenolith studies are: the majority of mafic lower crustal xenoliths formed through cumulate process, resitic xenoliths are rare; and formation and metamorphism of the deep crust is intimately linked to igneous activity and/or orogeny which are manifest in one form or another at the earth's surface. Therefore, estimates of crustal growth based on surface exposures is representative, although the proportion of remobilized pre-existing crust may be significantly greater at the surface than in the deep crust.

Rudnick, Roberta L.↗
NASA NTRS2014

Supervolcanoes Within an Ancient Volcanic Province in Arabia Terra, Mars

Several irregularly shaped craters located within Arabia Terra, Mars represent a new type of highland volcanic construct and together constitute a previously unrecognized martian igneous province. Similar to terrestrial supervolcanoes, these low-relief paterae display a range of geomorphic features related to structural collapse, effusive volcanism, and explosive eruptions. Extruded lavas contributed to the formation of enigmatic highland ridged plains in Arabia Terra. Outgassed sulfur and erupted fine-grained pyroclastics from these calderas likely fed the formation of altered, layered sedimentary rocks and fretted terrain found throughout the equatorial region. Discovery of a new type of volcanic construct in the Arabia volcanic province fundamentally changes the picture of ancient volcanism and climate evolution on Mars. Other eroded topographic basins in the ancient Martian highlands that have been dismissed as degraded impact craters should be reconsidered as possible volcanic constructs formed in an early phase of widespread, disseminated magmatism on Mars.

Mars↗
NASA NTRS2023

Science and Science-Enabling Activities of the SHERLOC and WATSON Imaging Systems in Jezero Crater, Mars

During its first year of operation, the Perseverance rover explored the cratered and fractured floor of Jezero crater on Mars. Here, we report the use of the Scanning Habitability Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) imaging system that includes two high-resolution cameras, the Autofocus and Contextual Imager (ACI) and Wide Angle Topographic Sensor for Operations and eNgineering (WATSON). ACI is a fixed focus gray scale imager with a resolution of 10.1 μm/pixel whereas WATSON is a variable field of view, variable focus imager capable of resolution down to 14 μm/pixel. WATSON is a reflight of the MArs Hand Lens Imager (MAHLI) imager and has similar capabilities. During first-time activities, WATSON was used to support both science and engineering operations related to sample and abrasion patch assessment and sample collection and caching. WATSON also documented the deployment of the Ingenuity helicopter. The Crater Floor Campaign identified two primary rock units, the Máaz formation and the Séítah formation, which have been interpreted as lava flows and an olivine cumulate, respectively. Interpretation of rock textures with WATSON and ACI images was limited to abraded surfaces because unmodified outcrop surfaces (herein termed “natural surfaces”) show high degrees of dust covering, wind abrasion, and coating by secondary mineral products. WATSON and ACI images support the hypothesis that the material of both the Máaz and Séítah formations consists of largely aqueously altered mafic materials with varying igneous origins.

WATSON↗
NASA NTRS2012

The Grand Geochemistry of 4 Vesta: First Results

On 12-Dec-2011, the Dawn spacecraft commenced low altitude mapping of the giant asteroid, 4 Vesta (264-km mean radius). Dawn's roughly circular, polar, low altitude mapping orbit (LAMO) has a mean radius of 470 km, placing the spacecraft within about 210 km of Vesta's surface. At these altitudes, Dawn s Gamma Ray and Neutron Detector (GRaND) is sensitive to Vesta's elemental com-position (Fig. 1). GRaND will acquire data in LAMO for up to 16 weeks, which is sufficient to map the elemental composition of the entire surface of Vesta. The timing of LAMO enables us to report the first results of our geochemistry investigation at this conference. In this abstract, we present an overview of our initial observations, based on data acquired at high altitude and during the first weeks of LAMO. GRaND overview. A detailed description of the GRaND instrument, science objectives and prospective results is given in [1]. At low altitudes, GRaND is sensitive to gamma rays and neutrons produced by cosmogenic nuclear reactions and radioactive decay occurring within the top few decimeters of the surface and on a spatial scale of a few hundred kilometers. From these nuclear emissions, the abundance of several major- and minor-elements, such as Fe, Mg, Si, K, and Th can be determined. Assuming the howardite, eucrite, and diogenite (HED) meteorites are representative of Vesta s crustal composition [2], then GRaND will be able to map the mixing ratios of whole-rock HED end-members, enabling the determination of the relative proportions of basaltic eucrite, cumulate eucrite, and diogenite as well as the proportions of mafic and plagioclase minerals [1,3]. GRaND will also search for compositions not well-represented in the meteorite collection, such as evolved, K-rich lithologies [4], and outcrops of olivine from Vesta s mantle or igneous intrusions in major impact basins [5]. The search for a possible mesosiderite source region is described in [6]. GRaND will globally map the abundance of H, providing constraints on the delivery of H by solar wind and the infall of carbonaceous chondrite materials.

Prettyman, T. H.↗
NASA NTRS2005

Hadean Crustal Processes Revealed from Oxygen Isotopes and U-Th-Pb Depth Profiling of Pre-4.0 Ga Detrital Zircons from Western Australia

Because physical and chemical processes of the past are determined from analysis of a preserved geologic record, little is known about terrestrial crustal processes of the first 500 Ma during the so-called Hadean Eon. What is known from direct measurements has been derived almost exclusively from the study of greater than 4.0 Ga detrital zircons from the Jack Hills, Western Australia. The geochemistry of these zircons has direct application to understanding the origin and evolution of the rocks during the Hadean because: (i) U-Th-Pb age determinations by ion microprobe suggests the presence of crust as early as 4.37 Ga, or shortly after lunar formation; (ii) high-resolution U-Th-Pb zircon depth profiles reported here reveal several episodes of zircon growth in the Hadean previously unrecognized; (iii) core regions of pre-4.0 Ga zircons with igneous compositions are enriched in O-18 and contain metaluminous and peraluminous mineral inclusions, both features indicative of S-type grainitod protoliths. Study of these ancient zircons provides a unique window into the first half billion years that permits assessment of the potential of the Hadean Earth to host an emergent biosphere.

Trail, D.↗
NASA NTRS2017

The Effect of Shock on the Amorphous Component in Altered Basalt

Investigation of the geochemical and mineralogical composition of the Martian surface provides insight into the geologic history of the predominantly basaltic crust. The Chemistry and Mineralogy (CheMin) instrument onboard the Curiosity rover has returned the first X-Ray diffraction data from the Martian surface. However, large proportions (27 +/- 14 with some estimates as high as 50 weight percentage) of an amorphous component have been reported. As a remedy to this problem, mass balance equations using geochemistry, volatile chemistry, and mineralogy have been employed to constrain the geochemistry of the amorphous component. However, "the nature and number of amorphous phases that constitute the amorphous component is not unequivocally known". Multiple hypotheses have been proposed to explain the origin of this amorphous component: Allophane (Al2O); Basaltic glass (Volcanic and impact); Palagonite (Altered basaltic glass); Hisingerite (Fe (sup 3 plus)-bearing phyllosilicate); S/Cl-rich component (sulfates and/or akaganeite); Nanophase ferric oxide component (npOx). Establishing a multi-phase amorphous component from a basaltic precursor that has undergone physical and chemical weathering within geochemical constraints is of paramount importance to better understand the composition of a large portion of the Martian surface (up to 50 weight percentage). Shocked basalts from Lonar Crater in India are valuable analogs for the Martian surface because it is a well-preserved impact crater in a basaltic target. Having undergone pre- and post-shock aqueous alteration, these rocks provide crucial data regarding the effect of shock on the amorphous component in altered basalt. By conducting mass balance equations similar to what has been performed for Gale crater materials, we attempt to calculate the geochemistry of the amorphous component in altered basalts ranging from unshocked to Class 5 (Table 1). This has the potential to reveal the nature and origin (i.e. primary igneous, shock metamorphic, and/or aqueous alteration occurring before or after the impact event) of the amorphous component in shocked basalt with the goal of unravelling the history of the Martian surface.

Eckley, S. A.↗
NASA NTRS1978

Nucleation and growth of plagioclase and the development of textures in a high-alumina basaltic melt

Detailed experiments on the nucleation and growth of plagioclase from an igneous melt are carried out to characterize the magma prior to cooling. It is shown that the nature of the melt directly preceding cooling has a strong effect on texture development, regardless of the origin of the melt. The number, size, and shape of the crystals present in a melt upon extrusion can have a drastic effect on the final textures present in the resulting rocks. Conditions necessary for the formation of poikilitic, intersertal, and porphyritic textures in basaltic rocks are defined.

Nabelek, P. I.↗
NASA NTRS1973

Experimental petrology and origin of rocks from the Descartes Highlands

Petrographic studies of Apollo 16 samples indicate that rocks 62295 and 68415 are crystallization products of highly aluminous melts. 60025 is a shocked, crushed and partially annealed plagioclase cumulate. 60315 is a recrystallized noritic breccia of disputed origin. 60335 is a feldspathic basalt filled with xenoliths and xenocrysts of anorthosite, breccia, and anorthite. The Fe/(Fe+Mg) of plagioclase appears to be a relative crystallization index. Low pressure melting experiments with controlled Po2 indicate that the igneous samples crystallized at oxygen fugacities well below the Fe/FeO buffer. Crystallization experiments at various pressures suggest that the 62295 and 68415 compositions were produced by partial or complete melting of lunar crustal materials, and not by partial melting of the deep lunar interior.

Walker, D.↗
NASA NTRS2008

What We Might Know About Gusev Crater if the Mars Exploration Rover Spirit Mission were Coupled with a Mars Sample Return Mission

The science instruments on the Mars Exploration Rover (MER) Spirit have provided an enormous amount of chemical and mineralogical data during more than 1450 sols of exploration at Gusev crater. The Moessbauer (MB) instrument identified 10 Fe-bearing phases at Gusev Crater: olivine, pyroxene, ilmenite, chromite, and magnetite as primary igneous phases and nanophase ferric oxide (npOx), goethite, hematite, a ferric sulfate, and pyrite/marcusite as secondary phases. The Miniature Thermal Emission Spectrometer (Mini-TES) identified some of these Fe-bearing phases (olivine and pyroxene), non- Fe-bearing phases (e.g., feldspar), and an amorphous high-SiO2 phase near Home Plate. Chemical data from the Alpha Particle X-Ray Spectrometer (APXS) provided the framework for rock classification, chemical weathering/alteration, and mineralogical constraints. APXS-based mineralogical constraints include normative calculations (with Fe(3+)/FeT from MB), elemental associations, and stoichiometry (e.g., 90% SiO2 implicates opalline silica). If Spirit had cached a set of representative samples and if those samples were returned to the Earth for laboratory analysis, what value is added by Mars Sample return (MSR) over and above the mineralogical and chemical data provided by MER?

Morris, Richard V.↗
NASA NTRS2019

Unravelling Complex Geologic Histories Using U–Pb and Trace Element Systematics of Titanite

Unravelling the spatio-temporal evolution of orogenic terranes requires a comprehensive understanding of the duration and extent of metamorphic events and hydrothermal alteration. Commonly used minerals such as zircon and monazite may not fully record geological histories in complex tectonic settings because their elemental constituents do not react under many metamorphic and metasomatic conditions. Here, we complement the current geochronological record of the Capricorn Orogen, Western Australia, with titanite U–Pb geochronology and geochemistry of felsic intrusive rocks to draw conclusions about the use of titanite in understanding the evolution of orogenic terranes. Because titanite usually incorporates common-Pb and may be variably reset by multiple metamorphic and hydrothermal events, a workflow is provided here for the systematic and robust interpretation of titanite U-Pb data. The addition of trace element data in titanite is particularly effective for differentiating whether a grain is igneous, recrystallized or metamorphic. We have developed several petrogenetic indices to differentiate these three types of titanite using Zr-in-titanite temperature, Th/U, Th/Pb, Al/(Al + Fe), light to heavy rare earth element ratio, and Eu anomalies. The addition of trace element geochemistry can also highlight anomalously radiogenic (sup 207)Pb/(sup 206)Pb reservoirs. Utilization of our workflow in the Capricorn Orogen reveals that titanite ages from the same samples as published zircon U–Pb data range from coeval to several hundreds of Myr of age difference between the two minerals. Titanite geochronology and trace element geochemistry indicates ~20 Myr of previously unrecognized prolonged cooling for the Capricorn Orogeny to ca. 1750 Ma. The spatial extent of the ca. 1210–1170 Ma part of the Mutherbukin Tectonic Event is also broadened significantly farther north and south than previously recognized. Incorporating titanite geochronology and trace geochemistry with more commonly used techniques (e.g., zircon and monazite petrochronology) extends our ability to resolve the complete history of large-scale orogenic terranes.

Hugo K. H. Olierook↗
NASA NTRS1986

Geochemical and isotopic constraints on the tectonic setting of Serra dos Carajas belt, eastern Para, Brazil

The lower part of the Serra dos Carajas belt is the metavolcanic and metasedimentary Grao para Group (GPG). The GPG is thought to unconformably overlie the older (but undated) Xingu Complex, composed of medium and high-grade gneisses and amphibolite and greenstone belts. The geochemical data indicate that the GPG has many features in common with ancient and modern volcanic suites erupted through continental crust. The mafic rocks clearly differ from those of most Archean greenstone belts, and modern MORB, IAB, and hot-spot basalts. The geological, geochemical, and isotopic data are all consistent with deposition on continental crust, presumably in a marine basin formed by crustal extension. The isotopic data also suggest the existence of depleted mantle as a source for the parent magmas of the GPG. The overall results suggest a tectonic environment, igneous sources, and petrogenesis similar to many modern continental extensional basins, in contrast to most Archean greenstone belts. The Hammersley basin in Australia and the circum-Superior belts in Canada may be suitable Archean and Proterozoic analogues, respectively.

Olszewski, W. J., Jr.↗