Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYDROCHLORIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Primary photodissociation pathways of epichlorohydrin and analysis of the C-C bond fission channels from an O({sup 3}P)+allyl radical intermediate

This study initially characterizes the primary photodissociation processes of epichlorohydrin, c-(H{sub 2}COCH)CH{sub 2}Cl. The three dominant photoproduct channels analyzed are c-(H{sub 2}COCH)CH{sub 2}+Cl, c-(H{sub 2}COCH)+CH{sub 2}Cl, and C{sub 3}H{sub 4}O+HCl. In the second channel, the c-(H{sub 2}COCH) photofission product is a higher energy intermediate on C{sub 2}H{sub 3}O global potential energy surface and has a small isomerization barrier to vinoxy. The resulting highly vibrationally excited vinoxy radicals likely dissociate to give the observed signal at the mass corresponding to ketene, H{sub 2}CCO. The final primary photodissociation pathway HCl+C{sub 3}H{sub 4}O evidences a recoil kinetic energy distribution similar to that of four-center HCl elimination in chlorinated alkenes, so is assigned to production of c-(H{sub 2}COC)=CH{sub 2}; the epoxide product is formed with enough vibrational energy to isomerize to acrolein and dissociate. The paper then analyzes the dynamics of the C{sub 3}H{sub 5}O radical produced from C-Cl bond photofission. When the epoxide radical photoproduct undergoes facile ring opening, it is the radical intermediate formed in the O({sup 3}P)+allyl bimolecular reaction when the O atom adds to an end C atom. We focus on the HCO+C{sub 2}H{sub 4} and H{sub 2}CO+C{sub 2}H{sub 3} product channels from this radical intermediate in this report. Analysis of the velocity distribution of the momentum-matched signals from the HCO+C{sub 2}H{sub 4} products at m/e=29 and 28 shows that the dissociation of the radical intermediate imparts a high relative kinetic energy, peaking near 20 kcal/mol, between the products. Similarly, the energy imparted to relative kinetic energy in the H{sub 2}CO+C{sub 2}H{sub 3} product channel of the O({sup 3}P)+allyl radical intermediate also peaks at high-recoil kinetic energies, near 18 kcal/mol. The strongly forward-backward peaked angular distributions and the high kinetic energy release result from tangential recoil during the dissociation of highly rotationally excited nascent radicals formed photolytically in this experiment. The data also reveal substantial branching to an HCCH+H{sub 3}CO product channel. We present a detailed statistical prediction for the dissociation of the radical intermediate on the C{sub 3}H{sub 5}O potential energy surface calculated with coupled cluster theory, accounting for the rotational and vibrational energy imparted to the radical intermediate and the resulting competition between the H+acrolein, HCO+C{sub 2}H{sub 4}, and H{sub 2}CO+C{sub 2}H{sub 3} product channels. We compare the results of the theoretical prediction with our measured branching ratios. We also report photoionization efficiency (PIE) curves extending from 9.25 to 12.75 eV for the signal from the HCO+C{sub 2}H{sub 4} and H{sub 2}CO+C{sub 2}H{sub 3} product channels. Using the C{sub 2}H{sub 4} bandwidth-averaged absolute photoionization cross section at 11.27 eV and our measured relative photoion signals of C{sub 2}H{sub 4} and HCO yields a value of 11.6+1/-3 Mb for the photoionization cross section of HCO at 11.27 eV. This determination puts the PIE curve of HCO measured here on an absolute scale, allowing us to report the absolute photoionization efficiency of HCO over the entire range of photoionization energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fragmentation and reactivity in collisions of protonated diglycine with chemically modified perfluorinated alkylthiolate-self-assembled monolayer surfaces

Direct dynamics simulations are reported for quantum mechanical (QM)/molecular mechanical (MM) trajectories of N-protonated diglycine (gly{sub 2}-H{sup +}) colliding with chemically modified perfluorinated octanethiolate self-assembled monolayer (SAM) surfaces. The RM1 semiempirical theory is used for the QM component of the trajectories. RM1 activation and reaction energies were compared with those determined from higher-level ab initio theories. Two chemical modifications are considered in which a head group (-COCl or -CHO) is substituted on the terminal carbon of a single chain of the SAM. These surfaces are designated as the COCl-SAM and CHO-SAM, respectively. Fragmentation, peptide reaction with the SAM, and covalent linkage of the peptide or its fragments with the SAM surface are observed. Peptide fragmentation via concerted CH{sub 2}-CO bond breakage is the dominant pathway for both surfaces. HCl formation is the dominant species produced by reaction with the COCl-SAM, while for the CHO-SAM a concerted H-atom transfer from the CHO-SAM to the peptide combined with either a H-atom or radical transfer from the peptide to the surface to form singlet reaction products is the dominant pathway. A strong collision energy dependence is found for the probability of peptide fragmentation, its reactivity, and linkage with the SAM. Surface deposition, i.e., covalent linkage between the surface and the peptide, is compared to recent experimental observations of such bonding by Laskin and co-workers [Phys. Chem. Chem. Phys. 10, 1512 (2008)]. Qualitative differences in reactivity are seen between the COCl-SAM and CHO-SAM showing that chemical identity is important for surface reactivity. The probability of reactive surface deposition, which is most closely analogous to experimental observables, peaks at a value of around 20% for a collision energy of 50 eV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical diagnostic of bipolar electrical discharges in HCl, KCl, and KOH solutions

In this work, the characteristics of the plasma generated in HCl, KCl, and KOH solutions were analyzed using electrical and optical diagnostic techniques. Electrical discharges were initiated between two tungsten electrodes. Current and voltage characteristics have shown the features of a spark discharge for all of the solutions used in the experiment. The reactive species identified in the optical emission spectra depended on the type of solution used to generate the plasma. The time evolution of the reactive species depended on the nature of the solution and on the polarity of the applied pulse. The absorption spectra of the OH radical (X{sup 2}{Pi}{yields} A{sup 2}{Sigma}{sup +}) were acquired when the voltage pulses were applied to the electrodes, with the intensity being lower in the regions between the pulses. The OH radical density was highest for the HCl solution plasma (2 x 10{sup 17} cm{sup -3}) when positive voltage pulses were applied to the electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Routine production of copper-64 using 11.7MeV protons

Reliable production of copper-64 ({sup 64}Cu) was achieved by irradiating enriched nickel-64 ({sup 64}Ni, >94.8%) in an IBA 18/9 cyclotron. Nickel-64 (19.1 {+-} 3.0 mg) was electroplated onto an Au disc (125{mu}m Multiplication-Sign 15mm). Targets were irradiated with 11.7 MeV protons for 2 hours at 40{mu}A. Copper isotopes ({sup 60,61,62,64}Cu) were separated from target nickel and cobalt isotopes ({sup 55,57,61}Co) using a single ion exchange column, eluted with varying concentration of low HCl alcohol solutions. The {sup 64}Ni target material was recovered and reused. The {sup 64}Cu production rate was 1.46{+-}0.3MBq/{mu}A.hr/mg{sup 64}Ni(n = 10) (with a maximum of 2.6GBq of {sup 64}Cu isolated after 2hr irradiation at 40uA. Radionuclidic purity of the {sup 64}Cu was 98.7 {+-} 1.6 % at end of separation. Cu content was < 6mg/L (n = 21). The specific activity of {sup 64}Cu was determined by ICP-MS and by titration with Diamsar to be 28.9{+-}13.0GBq/{mu}mol[0.70{+-}0.35Ci/{mu}mol]/({mu}A.hr/mg{sup 64}Ni)(n = 10) and 13.1{+-}12.0GBq/{mu}mol[0.35{+-}0.32Ci/{mu}mol]/({mu}A.hr/mg{sup 64}Ni)(n 9), respectively; which are in agreement, however, further work is required.

07 ISOTOPE AND RADIATION SOURCES↗

The influence of translational and vibrational energy on the reaction of Cl with CH{sub 3}D

The reaction of Cl atoms with CH{sub 3}D proceeds either by abstraction of hydrogen to produce HCl + CH{sub 2}D or by abstraction of deuterium to produce DCl + CH{sub 3}. Using Cl atoms with different amounts of translational energy, produced by photolysis of Cl{sub 2} with 309, 355, or 416 nm light, reveals the influence of translational energy on the relative reaction probability for the two channels. These measurements give an estimate of the energy barrier for the reaction for comparison to theory and indicate that tunneling is the dominant reaction mechanism at low collision energies. Adding two quanta of C-H stretching vibration causes the reaction to proceed readily at all collision energies. Detecting the vibrational state of the CH{sub 2}D product shows that vibrational energy initially in the surviving C-H bond appears as vibrational excitation of the product, an example of spectator behavior in the reaction. The reaction produces both stretch and stretch-bend excited products except at the lowest collision energy. A subtle variation in the reaction probability of the lowest energy rotational states with translational energy may reflect the presence of a van der Waals well in the entrance channel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extending molecular simulation time scales: Parallel in time integrations for high-level quantum chemistry and complex force representations

Parallel in time simulation algorithms are presented and applied to conventional molecular dynamics (MD) and ab initio molecular dynamics (AIMD) models of realistic complexity. Assuming that a forward time integrator, f (e.g., Verlet algorithm), is available to propagate the system from time t{sub i} (trajectory positions and velocities x{sub i} = (r{sub i}, v{sub i})) to time t{sub i+1} (x{sub i+1}) by x{sub i+1} = f{sub i}(x{sub i}), the dynamics problem spanning an interval from t{sub 0}…t{sub M} can be transformed into a root finding problem, F(X) = [x{sub i} − f(x{sub (i−1})]{sub i} {sub =1,M} = 0, for the trajectory variables. The root finding problem is solved using a variety of root finding techniques, including quasi-Newton and preconditioned quasi-Newton schemes that are all unconditionally convergent. The algorithms are parallelized by assigning a processor to each time-step entry in the columns of F(X). The relation of this approach to other recently proposed parallel in time methods is discussed, and the effectiveness of various approaches to solving the root finding problem is tested. We demonstrate that more efficient dynamical models based on simplified interactions or coarsening time-steps provide preconditioners for the root finding problem. However, for MD and AIMD simulations, such preconditioners are not required to obtain reasonable convergence and their cost must be considered in the performance of the algorithm. The parallel in time algorithms developed are tested by applying them to MD and AIMD simulations of size and complexity similar to those encountered in present day applications. These include a 1000 Si atom MD simulation using Stillinger-Weber potentials, and a HCl + 4H{sub 2}O AIMD simulation at the MP2 level. The maximum speedup ((serial execution time)/(parallel execution time) ) obtained by parallelizing the Stillinger-Weber MD simulation was nearly 3.0. For the AIMD MP2 simulations, the algorithms achieved speedups of up to 14.3. The parallel in time algorithms can be implemented in a distributed computing environment using very slow transmission control protocol/Internet protocol networks. Scripts written in Python that make calls to a precompiled quantum chemistry package (NWChem) are demonstrated to provide an actual speedup of 8.2 for a 2.5 ps AIMD simulation of HCl + 4H{sub 2}O at the MP2/6-31G* level. Implemented in this way these algorithms can be used for long time high-level AIMD simulations at a modest cost using machines connected by very slow networks such as WiFi, or in different time zones connected by the Internet. The algorithms can also be used with programs that are already parallel. Using these algorithms, we are able to reduce the cost of a MP2/6-311++G(2d,2p) simulation that had reached its maximum possible speedup in the parallelization of the electronic structure calculation from 32 s/time step to 6.9 s/time step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface electronic structure for various surface preparations of Nb-doped SrTiO{sub 3} (001)

High-resolution angle-resolved photoemission spectroscopy (ARPES) was used to study the surface electronic structure of Nb-doped SrTiO{sub 3} (STO) single crystals prepared using a variety of surface preparations. ARPES measurements show that simple degreasing with subsequent anneal in vacuum is not an adequate surface preparation of STO, rather, preparations consisting of etching with buffered HF or HCl, and to a lesser extent, simple water leaching resulted in surfaces with much less disorder. A non-dispersing, mid-gap state was found ∼800 meV above the top of the valence band for samples which underwent etching. This mid-gap state is not present for vacuum-annealed and water-leached samples, as well as for STO thin films grown using molecular beam epitaxy. Theoretical modeling using density functional theory suggests that this mid-gap state is not related to the SrO- and TiO{sub 2}-terminated surfaces, but rather, is due to a partial hydrogenation of the STO surface that occurs during etching.

36 MATERIALS SCIENCE↗

Six-dimensional quantum dynamics study for the dissociative adsorption of HCl on Au(111) surface

The six-dimensional quantum dynamics calculations for the dissociative chemisorption of HCl on Au(111) are carried out using the time-dependent wave-packet approach, based on an accurate PES which was recently developed by neural network fitting to density functional theory energy points. The influence of vibrational excitation and rotational orientation of HCl on the reactivity is investigated by calculating the exact six-dimensional dissociation probabilities, as well as the four-dimensional fixed-site dissociation probabilities. The vibrational excitation of HCl enhances the reactivity and the helicopter orientation yields higher dissociation probability than the cartwheel orientation. A new interesting site-averaged effect is found for the title molecule-surface system that one can essentially reproduce the six-dimensional dissociation probability by averaging the four-dimensional dissociation probabilities over 25 fixed sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-frequency heating technique at the 18 GHz electron cyclotron resonance ion source of the National Institute of Radiological Sciences

The two-frequency heating technique was studied to increase the beam intensities of highly charged ions provided by the high-voltage extraction configuration (HEC) ion source at the National Institute of Radiological Sciences (NIRS). The observed dependences on microwave power and frequency suggested that this technique improved plasma stability but it required precise frequency tuning and more microwave power than was available before 2013. Recently, a new, high-power (1200 W) wide band-width (17.1–18.5 GHz) travelling-wave-tube amplifier (TWTA) was installed. After some single tests with klystron and TWT amplifiers the simultaneous injection of the two microwaves has been successfully realized. The dependence of highly charged ions (HCI) currents on the superposed microwave power was studied by changing only the output power of one of the two amplifiers, alternatively. While operating the klystron on its fixed 18.0 GHz, the frequency of the TWTA was swept within its full limits (17.1–18.5 GHz), and the effect of this frequency on the HCI-production rate was examined under several operation conditions. As an overall result, new beam records of highly charged argon, krypton, and xenon beams were obtained at the NIRS-HEC ion source by this high-power two-frequency operation mode.

43 PARTICLE ACCELERATORS↗

Near-resonant rotational energy transfer in HCl–H{sub 2} inelastic collisions

We present a new four-dimensional (4D) potential energy surface for the HCl–H{sub 2} van der Waals system. Both molecules were treated as rigid rotors. Potential energy surface was obtained from electronic structure calculations using a coupled cluster with single, double, and perturbative triple excitations method. The four atoms were described using the augmented correlation-consistent quadruple zeta basis set and bond functions were placed at mid-distance between the HCl and H{sub 2} centers of mass for a better description of the van der Waals interaction. The global minimum is characterized by the well depth of 213.38 cm{sup −1} corresponding to the T-shape structure with H{sub 2} molecule on the H side of the HCl molecule. The dissociation energies D{sub 0} are 34.7 cm{sup −1} and 42.3 cm{sup −1} for the complex with para- and ortho-H{sub 2}, respectively. These theoretical results obtained using our new PES are in good agreement with experimental values [D. T. Anderson, M. Schuder, and D. J. Nesbitt, Chem. Phys. 239, 253 (1998)]. Close coupling calculations of the inelastic integral rotational cross sections of HCl in collisions with para-H{sub 2} and ortho-H{sub 2} were performed at low and intermediate collisional energies. Significant differences exist between para- and ortho-H{sub 2} results. The strongest collision-induced rotational HCl transitions are the transitions with Δj = 1 for collisions with both para-H{sub 2} and ortho-H{sub 2}. Rotational relaxation of HCl in collision with para-H{sub 2} in the rotationally excited states j = 2 is dominated by near-resonant energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved metal-insulator-transition characteristics of ultrathin VO{sub 2} epitaxial films by optimized surface preparation of rutile TiO{sub 2} substrates

Key to the growth of epitaxial, atomically thin films is the preparation of the substrates on which they are deposited. Here, we report the growth of atomically smooth, ultrathin films of VO{sub 2} (001), only ∼2 nm thick, which exhibit pronounced metal-insulator transitions, with a change in resistivity of ∼500 times, at a temperature that is close to that of films five times thicker. These films were prepared by pulsed laser deposition on single crystalline TiO{sub 2}(001) substrates that were treated by dipping in acetone, HCl and HF in successive order, followed by an anneal at 700–750 °C in flowing oxygen. This pretreatment removes surface contaminants, TiO{sub 2} defects, and provides a terraced, atomically smooth surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ellipsometry characterization of polycrystalline ZnO layers with the modeling of carrier concentration gradient: Effects of grain boundary, humidity, and surface texture

Spectroscopic ellipsometry (SE) has been applied to study the effects of grain boundary, humidity, and surface texture on the carrier transport properties of Al-doped ZnO layers fabricated by dc and rf magnetron sputtering. In the SE analysis, the variation in the free carrier absorption toward the growth direction, induced by the ZnO grain growth on foreign substrates, has been modeled explicitly by adopting a multilayer model in which the optical carrier concentration (N{sub opt}) varies continuously with a constant optical mobility (μ{sub opt}). The effect of the grain boundary has been studied by comparing μ{sub opt} with Hall mobility (μ{sub Hall}). The change in μ{sub Hall}/μ{sub opt} indicates a sharp structural transition of the ZnO polycrystalline layer at a thickness of d ∼ 500 nm, which correlates very well with the structure confirmed by transmission electron microscopy. In particular, below the transition thickness, the formation of the high density grain boundary leads to the reduction in the μ{sub Hall}/μ{sub opt} ratio as well as N{sub opt}. As a result, we find that the thickness dependence of the carrier transport properties is almost completely governed by the grain boundary formation. On the other hand, when the ZnO layer is exposed to wet air at 85 °C, μ{sub Hall} reduces drastically with a minor variation of μ{sub opt} due to the enhanced grain boundary scattering. We have also characterized textured ZnO:Al layers prepared by HCl wet etching by SE. The analysis revealed that the near-surface carrier concentration increases slightly after the etching. We demonstrate that the SE technique can be applied to distinguish various rough textured structures (size ∼ 1 μm) of the ZnO layers prepared by the HCl etching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical study of Raman chirped adiabatic passage by X-ray absorption spectroscopy: Highly excited electronic states and rotational effects

Raman Chirped Adiabatic Passage (RCAP) is an efficient method to climb the vibrational ladder of molecules. It was shown on the example of fixed-in-space HCl molecule that selective vibrational excitation can thus be achieved by RCAP and that population transfer can be followed by X-ray Photoelectron spectroscopy [S. Engin, N. Sisourat, P. Selles, R. Taïeb, and S. Carniato, Chem. Phys. Lett. 535, 192–195 (2012)]. Here, in a more detailed analysis of the process, we investigate the effects of highly excited electronic states and of molecular rotation on the efficiency of RCAP. Furthermore, we propose an alternative spectroscopic way to monitor the transfer by means of X-ray absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectral shapes of Ar-broadened HCl lines in the fundamental band by classical molecular dynamics simulations and comparison with experiments

Spectral shapes of isolated lines of HCl perturbed by Ar are investigated for the first time using classical molecular dynamics simulations (CMDS). Using reliable intermolecular potentials taken from the literature, these CMDS provide the time evolution of the auto-correlation function of the dipole moment, whose Fourier-Laplace transform leads to the absorption spectrum. In order to test these calculations, room temperature spectra of various lines in the fundamental band of HCl diluted in Ar are measured, in a large pressure range, with a difference-frequency laser spectrometer. Comparisons between measured and calculated spectra show that the CMDS are able to predict the large Dicke narrowing effect on the shape of HCl lines and to satisfactorily reproduce the shapes of HCl spectra at different pressures and for various rotational quantum numbers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rotational mode specificity in the Cl + CHD{sub 3} → HCl + CD{sub 3} reaction

By exciting the rotational modes of vibrationally excited CHD{sub 3}(v{sub 1} = 1, JK), the reactivity for the Cl + CHD{sub 3} → HCl + CD{sub 3} reaction is observed enhanced by as much as a factor of two relative to the rotationless reactant. To understand the mode specificity, the reaction dynamics was studied using both a reduced-dimensional quantum dynamical model and the conventional quasi-classical trajectory method, both of which reproduced qualitatively the measured enhancements. The mechanism of enhancement was analyzed using a Franck-Condon model and by inspecting trajectories. It is shown that the higher reactivity for higher J states of CHD{sub 3} with K = 0 can be attributed to the enlargement of the cone of acceptance. On the other hand, the less pronounced enhancement for the higher J = K states is apparently due to the fact that the rotation along the C–H bond is less effective in opening up the cone of acceptance.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effect of magnetic field on copper in various corrosive medium

The effect of applied magnetic field on the corrosion behaviour of copper within various corrosive medium is investigated. The copper coupon is immersed in 0.5 M HCl, 0.5 M NaCl and 0.5 M NaOH with or without applying up to 40 mT magnetic fields for 24 hours. The weight loss of copper coupon in HCl increased up to 96.56% with applied magnetic fields. However, in NaOH medium, only 33.33% more weight loss was observed and no difference were observed for coupons in NaCl when magnetic field is applied. This observation indicates that corrosion behaviour in HCl and NaOH is controlled by mass transport that can be influenced by the induced magneto hydrodynamics effect when magnetic field is applied. There was no change in weight loss of copper in NaCl when magnetic field is applied because the corrosion mechanism of copper in NaCl is governed by electron charge transfer.

36 MATERIALS SCIENCE↗

Hyperfine excitation of linear molecules by para- and ortho-H{sub 2}: Application to the HCl–H{sub 2} system

The determination of hyperfine structure resolved excitation cross sections and rate coefficients due to H{sub 2} collisions is required to interpret astronomical spectra. In this paper, we present several theoretical approaches to compute these data. An almost exact recoupling approach and approximate sudden methods are presented. We apply these different approaches to the HCl–H{sub 2} collisional system in order to evaluate their respective accuracy. HCl–H{sub 2} hyperfine structure resolved cross sections and rate coefficients are then computed using recoupling and approximate sudden methods. As expected, the approximate sudden approaches are more accurate when the collision energy increases and the results suggest that these approaches work better for para-H{sub 2} than for ortho-H{sub 2} colliding partner. For the first time, we present HCl–H{sub 2} hyperfine structure resolved rate coefficients, computed here for temperatures ranging from 5 to 300 K. The usual Δj{sub 1} = ΔF{sub 1} propensity rules are observed for the hyperfine transitions. The new rate coefficients will significantly help the interpretation of interstellar HCl emission lines observed with current and future telescopes. We expect that these new data will allow a better determination of the HCl abundance in the interstellar medium, that is crucial to understand the interstellar chlorine chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

{sup 55}Co separation from proton irradiated metallic nickel

{sup 55}Co with > 97% radionuclidic purity 24 hours after end of bombardment (EoB) was produced from the {sup 58}Ni(p,α) reaction using proton irradiations of 16 MeV on natural nickel. Two-hour irradiations with 25 μA on a 254 μm thick nickel foil generate 0.18 ± 0.01 GBq (n = 3) 24 hours after EoB. The separation of cobalt from the target material and other metallic contaminants present at trace levels is accomplished in HCl medium by two rounds of anion exchange chromatography (AG1-X8) using an automated module driven by a peristaltic pump. 80 ± 5 % (n = 3) of the activity generated at EoB is ready for labeling in 0.1 M HCl one hour after the start of separation. Using 99.999% pure Ni, the reactivity (decay corrected to EoB) with the bifunctional chelator (BFC) DOTA was 8.5 GBq/μmol; enough for radiolabeling BFC conjugated biomolecules at a nmol scale with > 90% yield. Using 99.9% pure Ni the reactivity with DOTA and NOTA was 0.19 +/− 0.09 GBq/μmol and 2.9 +/− 1.7 GBq/μmol (n = 2), respectively. Both cobalt complexes showed 100% in vitro stability in PBS and mouse serum over 41 hours at room temperature. MicroPET images of a miniature Derenzo phantom show excellent resolution where rods of 1.5 mm were separated by two times their diameter.

07 ISOTOPE AND RADIATION SOURCES↗