Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect of Laser Beam Profile on Rotating Lattice Single Crystal Growth in Sb2S3 Model Glass

Laser heating of chalcogenide glasses has successfully produced rotating lattice single crystals through a solid-solid transformation. To better understand the nature of complex, orientation-dependent lattice rotation, we designed heat profiles of the continuous wave laser by beam shaping, fabricated larger Sb2S3 crystal dots in Sb2S3 glass, and investigated the lattice rotation where the crystal could grow in all radial directions under a circular thermal gradient. The results show that the rate of lattice rotation is highly anisotropic and depends on crystallographic direction. The nature of this rotation is the same in crystals of different orientation relative to the surface. The growth directions that align with the slip planes show the highest rate of rotation and the rotation rate gradually decreases away from this direction. Additionally, the presence of multiple growth directions results in a complicated rotation system. We suggest that the growth front influences the density of dislocations introduced during growth under confinement and thus affects the lattice rotation rate in these crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of Bone Growth in Additive-Manufactured Pedicle Screw Implant by Using Ti-6Al-4V and Bioactive Glass Powder Composite

In this study, we optimized the geometry and composition of additive-manufactured pedicle screws. Metal powders of titanium-aluminum-vanadium (Ti-6Al-4V) were mixed with reactive glass-ceramic biomaterials of bioactive glass (BG) powders. To optimize the geometry of pedicle screws, we applied a novel numerical approach to proposing the optimal shape of the healing chamber to promote biological healing. We examined the geometry and composition effects of pedicle screw implants on the interfacial autologous bone attachment and bone graft incorporation through in vivo studies. The addition of an optimal amount of BG to Ti-6Al-4V leads to a lower elastic modulus of the ceramic-metal composite material, effectively reducing the stress-shielding effects. Pedicle screw implants with optimal shape design and made of the composite material of Ti-6Al-4V doped with BG fabricated through additive manufacturing exhibit greater osseointegration and a more rapid bone volume fraction during the fracture healing process 120 days after implantation, per in vivo studies.

stress-shielding effect↗
DOE OSTI2020

A Deep Neural Network for Accurate and Robust Prediction of the Glass Transition Temperature of Polyhydroxyalkanoate Homo- and Copolymers

The purpose of this study was to develop a data-driven machine learning model to predict the performance properties of polyhydroxyalkanoates (PHAs), a group of biosourced polyesters featuring excellent performance, to guide future design and synthesis experiments. A deep neural network (DNN) machine learning model was built for predicting the glass transition temperature, Tg, of PHA homo- and copolymers. Molecular fingerprints were used to capture the structural and atomic information of PHA monomers. The other input variables included the molecular weight, the polydispersity index, and the percentage of each monomer in the homo- and copolymers. The results indicate that the DNN model achieves high accuracy in estimation of the glass transition temperature of PHAs. In addition, the symmetry of the DNN model is ensured by incorporating symmetry data in the training process. The DNN model achieved better performance than the support vector machine (SVD), a nonlinear ML model and least absolute shrinkage and selection operator (LASSO), a sparse linear regression model. The relative importance of factors affecting the DNN model prediction were analyzed. Sensitivity of the DNN model, including strategies to deal with missing data, were also investigated. Compared with commonly used machine learning models incorporating quantitative structure–property (QSPR) relationships, it does not require an explicit descriptor selection step but shows a comparable performance. The machine learning model framework can be readily extended to predict other properties.

quantitative structure–property relationship (QSPR↗
DOE OSTI2024

Uncovering the Network Modifier for Highly Disordered Amorphous Li‐Garnet Glass‐Ceramics

Abstract Highly disordered amorphous Li 7 La 3 Zr 2 O 12 (aLLZO) is a promising class of electrolyte separators and protective layers for hybrid or all‐solid‐state batteries due to its grain‐boundary‐free nature and wide electrochemical stability window. Unlike low‐entropy ionic glasses such as Li x PO y N z (LiPON), these medium‐entropy non‐Zachariasen aLLZO phases offer a higher number of stable structure arrangements over a wide range of tunable synthesis temperatures, providing the potential to tune the LBU‐Li + transport relation. It is revealed that lanthanum is the active “network modifier” for this new class of highly disordered Li + conductors, whereas zirconium and lithium serve as “network formers”. Specifically, within the solubility limit of La in aLLZO, increasing the La concentration can result in longer bond distances between the first nearest neighbors of Zr─O and La─O within the same local building unit (LBU) and the second nearest neighbors of Zr─La across two adjacent network‐former and network‐modifier LBUs, suggesting a more disordered medium‐ and long‐range order structure in LLZO. These findings open new avenues for future designs of amorphous Li + electrolytes and the selection of network‐modifier dopants. Moreover, the wide yet relatively low synthesis temperatures of these glass‐ceramics make them attractive candidates for low‐cost and more sustainable hybrid‐ or all‐solid‐state batteries for energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Birefringent Glass‐Engraved Quasi‐Linear Nanograting Metasurface Based on Self‐Organizing Process for Large Aperture High Power Laser Applications

All-glass metasurface “nanograting” structures that exhibit birefringence in the formed layer are reported. The key enabler of this work is ion beam processing at an angle sufficiently off-normal incidence, inducing self-assembly of a deposited metal layer into quasi-linear metallic features that can function as an etching mask. As a result, a fused silica metasurface, monolithic to the underlying substrate, is demonstrated at 375 nm wavelength to exhibit a phase delay angle of 30° between the principal axes. The capability of an angled etch mask replenishment process is also demonstrated for achieving deeper etch depth and for increasing the grating period, another first – to the best of the knowledge. This is the first display of a technology capable of fabricating glass-engraved near-linear grating structure with a feature-to-feature period as small as 118.6 nm. Furthermore, this technology has the potential to generate grating-like structures with periods as small as 12.4 nm, as demonstrated here with reactive ion beam processing assisted mask assembly. Furthermore, these structures are shown to have reflectivity < 0.4% across the wavelength band 350 nm – 1000 nm. Such a technology can enable laser-durable grating structures for the deep-UV and even down to soft X-ray wavelengths.

Ray, Nathan J. [Lawrence Livermore National Labora↗
DOE OSTI2022

Thermal conductivity of salvaged fused cast alumina used in the glass industry

Fused cast alumina (FCA) has been and continues to be used as a refractory material in energy intensive industries such as glass melting and chemical processing. In-service degradation due to high temperature exposure in harsh environment affects the designed furnace thermal profiles and energy consumption. Phase transformation may occur at the refractory hot face during glass melting altering the properties. Three FCA blocks recovered from industrial furnaces were investigated in this study. The as-received FCA consists primarily of a mixture of alpha (α) and beta (β) alumina that has a thermal conductivity value of 5–6 W/mK. The Hot Disk method was used to obtain thermal conductivity directly on the refractory blocks. At the hot face, a transformation from β to α alumina occurred and was confirmed by an X-ray diffraction study. Thermal conductivity measurements as a function of position also showed a clear transition from β to α alumina at both ends of a complete block with no voids. Thermal conductivity of the α alumina tripled compared to β alumina. This study provides important information of heat transfer and thermal conductivity evolution to refractory manufacturers and users.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Identifying Suitable Front Contacts for High‐Efficiency Cd(Se,Te) Solar Cells on Space‐Qualified Cover Glass

Deployment of photovoltaics in space requires devices that combine high-efficiency, low areal mass, and resilience to harsh environments. Historically, high-efficiency multijunction III–V materials have dominated space power systems; however, their high cost and limited manufacturing throughput motivate the exploration of scalable alternatives. While CdTe-based thin-film photovoltaics offer an attractive option, their performance on non-conventional substrates can suffer from front contact instability under higher-temperature processing. Here, the role of front contact chemistry in limiting cell performance is investigated using CdTe-based devices fabricated on 150 μm thick Ceria-doped space-qualified 0214 Corning glass. A matrix of four transparent conducting oxides (TCOs: CTO, AZO, ITO, IZO) combined with two n-type emitters (MZO, IGO) reveals chemical stability at the front interface—rather than absorber composition alone—governs recombination losses, voltage deficits, and device reproducibility. Chemically stable front contact combinations suppress elemental diffusion and interfacial degradation, resulting in significantly improved carrier lifetimes and junction quality. These insights are validated through record-certified Cd(Se,Te) cell efficiencies of 18.4% under AM1.5G and 16.2% under AM0 illumination on ultra-thin glass. Beyond CdTe, this work provides a general framework for the rational selection of TCO/emitter interfaces in superstrate thin-film photovoltaics, including emerging technologies like metal halide perovskites, while enabling high-efficiency, lightweight photovoltaics for space applications.

14 SOLAR ENERGY↗
DOE OSTI2022

3D printing of void-free glass monoliths: rheological and geometric considerations

Direct ink writing (DIW) is a versatile additive manufacturing technique capable of printing 3D architectures from a broad range of materials. The key advantage of DIW is the ability to spatially control both the architecture and the composition of the printed part, which enables the production of components with previously unachievable combinations of functionalities. One emergent application space for DIW has been in additively manufactured glass optics, where a “green body” is patterned layer-by-layer by extruding a silica-based slurry through a microfluidic nozzle and then thermally consolidated to transparent glass. A critical aspect of the process is ensuring that the printed part is completely free of voids that can occur in the interstitial spaces between the extruded filaments. This outcome is governed by the interplay between ink rheology and strains imposed by the printing process and geometric packing of the filaments. Here, we explore the strain- and rate-dependent deformation events in the DIW process to determine conditions that enable the printing of void-free monoliths without sacrificing shape fidelity. We focus on yield stress fluids consisting of fumed silica nanoparticles dispersed in organic solvents at varied volume fractions to control the rheological properties. We investigate the printability of these ink materials as a function of print process variables and devise the appropriate dimensionless parameters that capture the geometry-dependent and rate-dependent effects on the deformation of the extruded ink. Lastly, we use these scaling arguments to construct a phase diagram for void-free monolith printability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A method and tool to determine the colorimetric and photobiological properties of light transmitted through glass and other optical materials

Here we describe a framework and provides a computational tool to characterize the color quality and biological potential of light that is transmitted through glass and other optical materials. The IES TM-30 framework and Excel computation tool were adapted to evaluate color quality, with measures from CIE S 026, UL 24480, and the WELL Building Standard v2 added to evaluate biological potential. The user selects a pre-transmittance spectral power distribution (SPD), such as for a CIE D-Series Illuminant, Planckian radiation, electric lamp, or measurement of daylight at a building site. The tool allows a user to populate a database with spectral data for glazing or other optical materials, comprising spectral transmission and the spectral reflectance of both sides. The user creates a unit with one, two, or three panes of glazing or other optical materials, and the tool calculates the composite spectral transmittance accounting for reflections between materials. The tool computes the transmitted SPD, then determines colorimetric and photobiological outputs using the transmitted SPD as the test source. Glass, window, and skylight manufacturers can employ the tool to optimize glazing spectral transmission to achieve intentional colorimetric and photobiological performance with transmitted light. Electric lighting manufacturers, designers, and researchers can use the tool to evaluate the impact of glazing units and other optical materials on the color quality and biological potential of transmitted light.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synergistic foam stabilization and transport improvement in simulated fractures with polyelectrolyte complex nanoparticles: Microscale observation using laser etched glass micromodels

Inaccessibility to direct pore scale observation in hydrocarbon recovery of tight shale formations poses a great challenge to water-energy nexus initiatives and necessitates the use of high throughput technologies to emulate environmentally friendly processes. Herein, we employ a precise glass micromodel fabrication and visualization method to isolate the supercritical CO 2 bubbles surrounded by CO 2 -water lamella prepared in saline produced water stabilized with molecular complexation of zwitterionic surfactants (ZS) and polyelectrolyte complex nanoparticles (PECNP). The Selective Laser Enhanced Etching (SLE) technique was selected for micromodel simulation of high-pressure flow. Two representative designs, (1) fracture/micro-crack network 28 and (2) fracture/matrix were etched on fused silica glass with a laser printing machine and scCO 2 foam was injected to study the foamability, propagation, stability, and fluid loss properties. The highly monodispersed and uniformly distributed array of scCO 2 bubbles were detected in flow of scCO 2 foam in highly saline brine containing ionic complexes of positively charged PECNPs and ZS, whereas foam flow with the lamella containing ZS in fractures offered a noticeably large and polydisperse array of scCO 2 bubbles. scCO 2 bubble motion and deformation were traced, and local description of foam flow was visually examined. The confined array of scCO 2 bubbles stabilized by ZS in microcracks was affected by bubble growth and coalescence, whereas the super-populated array of monodispersed scC O2 bubbles with lamella containing complexes of PECNP and ZS were able to fill the channels with stable configurations within the timeframe of comparative stability measurements. The ability of complex fluid to prevent the formation damage was evaluated through fluid loss visualization in micromodels. Probing scCO 2 foam transport in homogenous porous media revealed smaller volume leak-off for scCO 2 foam containing PECNP-ZS ionic complexes.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2025

Equilibrium Fe isotope fractionation between olivine, pyroxene, spinel and MORB glass: Implications for mantle partial melting to generate MORBs

Primitive mid-ocean ridge basalts (MORBs) exhibit Fe isotopic compositions heavier than the upper mantle by +0.074 ± 0.028 ‰ for δ 56 Fe. The processes responsible for this isotopic difference remain unclear. Modeling of Fe isotope fractionation during mantle partial melting requires reliable equilibrium Fe isotope fractionation factors between minerals and melts, for which consistent data are still lacking. Here, in this study, we used Nuclear Resonant Inelastic X-ray Scattering (NRIXS) technique to measure Fe force constants for a MORB glass (ALV 519-4-1) and natural mantle minerals (olivine, orthopyroxene, clinopyroxene, and spinel) to determine the equilibrium Fe isotope fractionation factors between them. The force constants determined in this study, in increasing order, are 167 ± 26 N/m for spinel, 175 ± 17 N/m for olivine, 176 ± 20 N/m for MORB glass, 205 ± 26 N/m for clinopyroxene, and 219 ± 36 N/m for orthopyroxene. We evaluated the previously proposed mechanisms for the heavy Fe isotopic composition of MORBs, including (i) mantle partial melting, (ii) mantle lithological heterogeneity, with pyroxenite in the source, (iii) mantle metasomatism by low-degree melts, and (iv) fractional crystallization of olivine from melts. For (i), we used the pMELTS program to simulate adiabatic decompression melting of mantle peridotites, and calculated Fe isotope fractionation based on Fe 3+ –Fe 2+ equilibrium-controlled fractionation, where Fe 3+ forms stronger bonds and is more incompatible than Fe 2+ . At 10 wt% peridotite melting, corresponding to MORB generation, only +0.03 ‰ Fe isotope fractionation between the melt and the original bulk composition (Δ 56 Fe = δ 56 Fe melt - δ 56 Fe 0 ) was produced, insufficient to account for the observed MORB-upper mantle difference. For (ii), melting of pyroxenites yields smaller Fe isotope fractionation than melting of peridotites, making it unlikely the cause for the MORB-upper mantle isotopic difference. For (iii), both the Fe 3+ /ΣFe ratio and the δ 56 Fe of melts increase with the degree of partial melting, indicating that low-degree melts are not isotopically heavy enough to significantly alter the isotopic composition of lithospheric mantle through metasomatism. For (iv), equilibrium isotope fractionation between olivine and melt is near zero. These results suggest that equilibrium Fe isotope fractionation alone cannot explain the MORB isotopic signature, highlighting the potential role of kinetic isotope fractionation. Using a diffusion model, we calculated kinetic Fe and Mg isotope fractionations associated with (iv) olivine crystallization from a melt, and found that the predicted Fe and Mg isotope fractionations were inconsistent with observations in MORBs. Qualitatively, two processes could have induced kinetic Fe isotope fractionation during MORB generation: (a) Fe-Mg interdiffusion between melt and solid during melt migration and (b) reactive melt-rock interactions during melt focusing. However, a quantitative understanding of their role in modifying the melt isotopic composition remains limited and requires further investigation.

Fe isotopes↗
DOE OSTI2021

New interaction potentials for alkaline earth silicate and borate glasses

New interaction potentials were developed for molecular dynamics simulations to study the role of Mg and Ca in modifying the structure and properties of alkaline earth silicates and borates. Competition between the depolymerization of the silica network and the formation of new bonds between oxygen atoms and modifiers leads to the enhancement of the elastic moduli with increasing modifier content in alkaline earth silicate glasses. Compared with calcium silicate, the higher elastic moduli of magnesium silicate result from a higher connectivity of the overall glass network due to the incorporation of fourfold coordinated magnesium and a more rigid connection between oxygen atoms and modifiers. In contrast to the silicates, the effect of modifier on the elastic moduli of alkaline earth borates is dominated by the formation of fourfold coordinated boron (N 4 ). Calcium borate with higher N 4 shows a more rigid network structure and higher elastic moduli.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Achieving 5.9% elastic strain in kilograms of metallic glasses: Nanoscopic strain engineering goes macro

The ideal elastic limit is the upper bound of the achievable strength and elastic strain of solids. However, the elastic strains that bulk materials can sustain are usually below 2%, due to the localization of inelastic deformations at the lattice scale. In this study, we achieved >5% elastic strain in bulk quantity of metallic glass, by exploiting the more uniform and smaller-magnitude atomic-scale lattice strains of martensitic transformation as a loading medium in a bulk metallic nanocomposite. The self-limiting nature of martensitic transformation helps to prevent lattice strain transfer that leads to the localization of deformation and damage. This lattice strain egalitarian strategy enables bulk metallic materials in kilogram-quantity to achieve near-ideal elastic limit. This concept is verified in a model in situ bulk amorphous (TiNiFe)-nanocrystalline (TiNi(Fe)) composite, in which the TiNiFe amorphous matrix exhibits a maximum tensile elastic strain of similar to 5.9%, which approaches its theoretical elastic limit. As a result, the model bulk composite possesses a large recoverable strain of similar to 7%, a maximum tensile strength of above 2 GPa, and a large elastic resilience of similar to 79.4 MJ/m 3 . The recoverable strain and elastic resilience are unmatched by known high strength bulk metallic materials. This design concept opens new opportunities for the development of high-performance bulk materials and elastic strain engineering of the physiochemical properties of glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Sol-gel derived silicate-phosphate glass SiO 2 –P 2 O 5 –CaO–TiO 2 : The effect of titanium isopropoxide on porosity and thermomechanical stability

Despite of several decades lasting extensive research of bioactive and bioresorbable glasses the systematic parametrization and determination of the key factors affecting porosity and thermomechanical characteristics still remains challenging. Here, we present silica-phosphate glasses, with the composition 70SiO 2 - 20P 2 O 5 - (10-x)CaO-xTiO 2 (mol%; x = 0, 2.5, 5, and 7.5), prepared by sol -gel method and reinforced by titanium dioxide via titanium isopropoxide (TTIP) incorporation which demonstrated tunable variation of porosity from micro-to macro -region and superb mechanical integrity during the calcination process. The presence of 7.5 mol% TiO 2 promotes dimensional stability up to 1000°C as investigated by thermomechanical analysis. The XRD showed the dominant presence of silicon phosphate [Si(P 2 O 7 )], titanium phosphate [Ti(P 2 O 7 )] and calcium phosphates [β-Ca(P 2 O 6 ) and γ- Ca 2 (P 2 O 7 )]. The effect of TiO 2 doping on the multiscale morphology and porosity was investigated by means of SEM, MIP, μCT, N 2 adsorption and USAXS/SAXS. Increasing TiO 2 content leads to the formation of open porosity up to 70vol% and drives the formation of a refined interconnected macroporosity of 2-30 μm. In contrast, mesoporosity with a dominance of 3-6nm pores decreases in all samples with increasing TiO 2 content. USAXS/SAXS revealed an increase in primary particle size with increasing TiO 2 content which is in good agreement with the nitrogen physisorption analysis showing that microporosity decreases with increasing TiO2 content.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Comparative study on the overall energy performance between photovoltaic and Low-E insulated glass units

In this report a novel semi-transparent building integrated photovoltaic (BIPV) laminate was developed and introduced in this paper. It was produced by cutting standard mono-crystalline silicon solar cells into small strips and then making electrical connections between each strip before laminating the cells between two layers of glass. The overall energy performance and energy saving potential of the BIPV insulated glass unit (IGU) under real world conditions were identified through a side by side comparative study. Compared to the reference IGU, the BIPV IGU had lower solar heat gain coefficient (SHGC) but much higher U-factor. The average HVAC electricity saving of the BIPV IGU was about 10% relative to the reference IGU. Daylighting measurement and analysis were carried out to evaluate the trade-offs associated with the BIPV IGU between daylight, glare, and lighting energy use. The results indicated that the BIPV IGU is better than the reference IGU in reducing discomfort glare. However, if the most conservative viewpoint near the window is used for the assessment, a lower transmittance BIPV IGU is required to bring the overall discomfort levels below the perceptible level. Lastly, the net energy saving potential associated with the novel BIPV IGU was identified based on the power, thermal and daylighting performance. On average, the BIPV IGU saved 16.8% of the total electricity use of the room. Further studies and improvement on the energy conversion efficiency of solar cells, the optimal transmittance as well as the thermal properties would make this technology more energy-efficient and affordable.

14 SOLAR ENERGY↗
DOE OSTI2022

Photothermal Atomic Force Microscopy Coupled with Infrared Spectroscopy (AFM-IR) Analysis of High Extinction Coefficient Materials: A Case Study with Silica and Silicate Glasses

Photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) brings significant value as a spatially resolved surface analysis technique for disordered oxide materials such as glasses, but additional development and fundamental understanding of governing principles is needed to interpret AFM-IR spectra, since the existing theory described for organic materials does not work for materials with high extinction coefficients for infrared (IR) absorption. This paper describes theoretical calculation of a transient temperature profile inside the IR-absorbing material considering IR refraction at the interface as well as IR adsorption and heat transfer inside the sample. Furthermore, this calculation explains the differences in peak positions and amplitudes of AFM-IR spectra from those of specular reflectance and extinction coefficient spectra. It also addresses the information depth of the AFM-IR characterization of bulk materials. AFM-IR applied to silica and silicate glass surfaces has demonstrated novel capability of characterizing subsurface structural changes and surface heterogeneity due to mechanical stresses from physical contacts, as well as chemical alterations manifested in surface layers through aqueous corrosion.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Medium-Range Ordering in the Ionic Glass Electrolytes LiPON and LiSiPON

In this work, we provide an in-depth structural characterization of the amorphous ionic glasses LiPON and LiSiPON with high Li content. Based on ab initio molecular dynamics simulations, the structure of these materials is an inverted structure with either isolated polyanion tetrahedra or polyanion dimers in a Li+ matrix. Based on neutron scattering data, this type of inverted structure leads to a significant amount of medium-range ordering in the structure, as demonstrated by two sharp diffraction peaks and a periodic structural oscillation in the density function G(r). While this medium-range ordering is commonly observed in liquids and metallic glasses, it has not previously been observed in oxides. On a local scale, adding N and Si increases the number of anion bridges and polyanion dimer structures, leading to higher ionic conductivity. In the medium-range ordering, the addition of Si leads to more disorder in the polyanion substructure but a significant increase in the ordering of the O substructure. Finally, we demonstrate that this inverted structure with medium-range ordering results in a glassy material that is both mechanically stiff and ductile on the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Spin-Glass-like State and Reversible Room-Temperature Magnetocaloric Effect in Double Distorted Perovskites Nd(Cu 3– x Mn x )Mn 4 O 12

The preparation, complex magnetic properties and room-temperature magnetocaloric effect in Nd(Cu 3–x Mn x )Mn 4 O 12 with cation distribution (Nd 3+ ) A (Cu 3–x 2+x Mn x 3+ ) A' (Mn 1+x 3+ Mn 3–x 4+ ) B O 12 2– (x = 1 and 1.5) have been reported. Both compounds show a sharp paramagnetic-ferromagnetic (FM) transition at T C of 300 and 280 K, respectively. The substitution of Cu by Mn at the A' site induces the emergence of a spin glass state below ≈63 K for x = 1 and ≈72 K for x = 1.5 compound. Another antiferromagnetic-like magnetic transition is also observed in both compounds at 23 and 28 K, respectively, which is discussed as the antiferromagnetic coupling between Nd 3+ at the A' site and (Mn 3+ /Mn 4+ ) at the B site. These two compounds exhibit room-temperature magnetocaloric effect. For a small field of 2 T, the maximum magnetic entropy changes –ΔS M are 1.5 J/kg K at 300 K and 1.4 J/kg K at 280 K, respectively. Furthermore, the –ΔS M (T) curves show an asymmetric distribution, resulting in high refrigerant capacity values for both compounds. We further demonstrate the distinct roles of the A'- and B-site spins on the magnetic properties and the origin of the spin-glass-like state in double distorted perovskites Ln(Cu 3–x Mn x )Mn 4 O 12 family of compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗