Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extremism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A stable atmospheric-pressure plasma for extreme-temperature synthesis

Plasmas can generate ultra-high-temperature reactive environments that can be used for the synthesis and processing of a wide range of materials. However, the limited volume, instability and non-uniformity of plasmas have made it challenging to scalably manufacture bulk, high-temperature materials. Here we present a plasma set-up consisting of a pair of carbon-fibre-tip-enhanced electrodes that enable the generation of a uniform, ultra-high temperature and stable plasma (up to 8,000 K) at atmospheric pressure using a combination of vertically oriented long and short carbon fibres. The long carbon fibres initiate the plasma by micro-spark discharge at a low breakdown voltage, whereas the short carbon fibres coalesce the discharge into a volumetric and stable ultra-high-temperature plasma. As a proof of concept, we used this process to synthesize various extreme materials in seconds, including ultra-high-temperature ceramics (for example, hafnium carbonitride) and refractory metal alloys. Moreover, the carbon-fibre electrodes are highly flexible and can be shaped for various syntheses. In conclusion, this simple and practical plasma technology may help overcome the challenges in high-temperature synthesis and enable large-scale electrified plasma manufacturing powered by renewable electricity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Metals strengthen with increasing temperature at extreme strain rates

The strength of materials depends on the rate at which they are tested, as defects, for example dislocations, that move in response to applied strains have intrinsic kinetic limitations. As the deformation strain rate increases, more strengthening mechanisms become active and increase the strength. However, the regime in which this transition happens has been difficult to access with traditional micromechanical strength measurements. Here, with microballistic impact testing at strain rates greater than 10 6 s −1 , and without shock conflation, we show that the strength of copper increases by about 30% for a 157 °C increase in temperature, an effect also observed in pure titanium and gold. This effect is counterintuitive, as almost all materials soften when heated under normal conditions. This anomalous thermal strengthening across several pure metals is the result of a change in the controlling deformation mechanism from thermally activated strengthening to ballistic transport of dislocations, which experience drag through phonon interactions. These results point to a pathway to better model and predict materials properties under various extreme strain rate conditions, from high-speed manufacturing operations to hypersonic transport.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unified 0.25-degree gridded infrastructure-critical extreme weather for the United States from 1979 to 2100

Extreme weather events can severely disrupt critical infrastructure, triggering cascading effects on power, transportation, and essential services. However, standard weather and climate datasets often lack specialized variables necessary for hazard assessments. We present a unified dataset of infrastructure-critical weather and climate variables across the United States at 0.25° resolution, covering daily or sub-daily intervals from 1979 to 2100. The dataset includes temperature, dew point, wind gusts, precipitation partitioned by rain, snow, and freezing rain or ice pellets, lightning, and wildfire metrics. Historical conditions (1979-2023) are synthesized from observations and reanalysis products, while future projections are derived from 14 CMIP6 global climate models (historical, SSP245, and SSP585 experiments). Physically based and data-driven methods are used to estimate variables not directly provided by existing models. By integrating these variables into a single unified dataset, we enable consistent, high-resolution assessments of weather-related infrastructure risks across past and future periods, supporting wide-ranging applications in energy, transportation, water resources, emergency management, and beyond.

Climate and Earth system modelling↗
DOE OSTI2020

Extreme ultraviolet microscope characterization using photomask surface roughness

We demonstrate a method for characterizing the field-dependent aberrations of a full-field synchrotron-based extreme ultraviolet microscope. The statistical uniformity of the inherent, atomic-scale roughness of readily-available photomask blanks enables a self-calibrating computational procedure using images acquired under standard operation. We characterize the aberrations across a 30-um field-of-view, demonstrating a minimum aberration magnitude of smaller than λ/21 rms averaged over the center 5-um area, with a measurement accuracy better than λ/180 rms. The measured field variation of aberrations is consistent with system geometry and agrees with prior characterizations of the same system. In certain cases, it may be possible to additionally recover the illumination wavefront from the same images. Our method is general and is easily applied to coherent imaging systems with steerable illumination without requiring invasive hardware or custom test objects; hence, it provides substantial benefits when characterizing microscopes and high-resolution imaging systems in situ.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Tropical lacustrine sediment microbial community response to an extreme El Niño event

Salinity can influence microbial communities and related functional groups in lacustrine sediments, but few studies have examined temporal variability in salinity and associated changes in lacustrine microbial communities and functional groups. To better understand how microbial communities and functional groups respond to salinity, we examined geochemistry and functional gene amplicon sequence data collected from 13 lakes located in Kiritimati, Republic of Kiribati (2° N, 157° W) in July 2014 and June 2019, dates which bracket the very large El Niño event of 2015–2016 and a period of extremely high precipitation rates. Lake water salinity values in 2019 were significantly reduced and covaried with ecological distances between microbial samples. Specifically, phylum- and family-level results indicate that more halophilic microorganisms occurred in 2014 samples, whereas more mesohaline, marine, or halotolerant microorganisms were detected in 2019 samples. Functional Annotation of Prokaryotic Taxa (FAPROTAX) and functional gene results (nifH, nrfA, aprA) suggest that salinity influences the relative abundance of key functional groups (chemoheterotrophs, phototrophs, nitrogen fixers, denitrifiers, sulfate reducers), as well as the microbial diversity within functional groups. Accordingly, we conclude that microbial community and functional gene groups in the lacustrine sediments of Kiritimati show dynamic changes and adaptations to the fluctuations in salinity driven by the El Niño-Southern Oscillation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

X-ray microscopy and talbot imaging with the matter in extreme conditions X-ray imager at LCLS

The last decade has shown the great potential that X-ray Free Electron Lasers (FEL) have to study High Energy Density (HED) physics. Experiments at FELs have made significant breakthroughs in Shock Physics and Dynamic Diffraction, Dense Plasma Physics and Warm Dense Matter Science, using techniques such as isochoric heating, inelastic scattering, small angle scattering and X-ray diffraction. In addition, and complementary to these techniques, the coherent properties of the FEL beam can be used to image HED samples with high fidelity. We present new imaging diagnostics and techniques developed at the Matter in Extreme Conditions (MEC) instrument at Linac Coherent Light Source (LCLS) over the last few years. We show results in Phase Contrast Imaging geometry, where the X-ray beam propagates from the target to a camera revealing its phase, as well as in Direct Imaging geometry, where a real image of the sample plane is produced in the camera with a spatial resolution down to 200 nm. Last, we show an implementation of the Talbot Imaging method allowing both X-ray phase and intensity measurements change introduced by a target with sub-micron resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Intercalated chalcogenides Fe 1/4 TaS 2 and Fe 1/3 TaS 2 under extreme pressure—temperature conditions

Intercalation is an important strategy for enhancing functionality in complex chalcogenides. This is because layered materials can be endowed with intriguing properties by filling the van der Waals gap with various ions and molecules, which, in addition to their unique chemistry, break symmetry in new ways. In order to explore the properties of intercalated metal dichalcogenides under extreme pressure-temperature conditions, we combine diamond anvil cell techniques, Raman scattering spectroscopy, magnetic susceptibility, and first-principles calculations to reveal the pressure–temperature phase diagram of Fe 1/3 TaS 2 . This system hosts a compression-driven structural phase transition to a polar state as well as remnant charge density wave signatures deriving from the host lamella of the 2H-parent compound. We also explore the role of different A-site patterns and determine that, by comparison, Fe 1/4 TaS 2 is soft and flexible due to the lower metal density inside the van der Waals gap. These findings open the door to entirely new states of matter with exciting property combinations, including metallicity, polarity, chirality, and altermagnetism – depending upon the conditions – that can support a wide range of spintronics and phononics applications.

Materials science↗
DOE OSTI2025

Extreme shape coexistence observed in 70 Co

The shape of the atomic nucleus is a property that underpins our understanding of nuclear systems, impacts the limits of nuclear existence, and enables probes of physics beyond the Standard Model. Nuclei can adopt a variety of shapes, including spheres, axially deformed spheroids, and pear shapes. In some regions of the nuclear chart where a spherical nucleus would naively be expected, deformed nuclear states can result from the collective action of constituent protons and neutrons. In a small subset of nuclei both spherical and deformed nuclear states have been experimentally observed, a phenomenon termed shape coexistence. We present spectroscopic evidence for the coexistence of J π = 1 + spherical and deformed states in 70 Co, separated by less than 275 keV. This close degeneracy of levels with the same J π and different shapes demonstrates an extreme example of shape coexistence resulting from the interplay of independent particle motion and collective behavior in highly unstable nuclear systems and identifies the Co isotopes as a transition point between deformed ground states observed in the Cr isotopes and spherical configurations observed in the closed-shell Ni isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Photon acceleration of high-intensity vector vortex beams into the extreme ultraviolet

Extreme ultraviolet (XUV) light sources allow for the probing of bound electron dynamics on attosecond scales, interrogation of high-energy-density matter, and access to novel regimes of strong-field quantum electrodynamics. Despite the importance of these applications, coherent XUV sources remain relatively rare, and those that do exist are limited in their peak intensity and spatio-polarization structure. Here, we demonstrate that photon acceleration of an optical vector vortex pulse in the moving density gradient of an electron beam–driven plasma wave can produce a high-intensity, tunable-wavelength XUV pulse with the same vector vortex structure as the original pulse. Quasi-3D, boosted-frame particlein- cell simulations show the transition of optical vector vortex pulses with 800-nm wavelengths and intensities below 10 18 W/cm 2 to XUV vector vortex pulses with 36-nm wavelengths and intensities exceeding 10 20 W/cm 2 over a distance of 1.2 cm. The XUV pulses have sub-femtosecond durations and nearly flat phase fronts. The production of such high-quality, high-intensity XUV vector vortex pulses could expand the utility of XUV light as a diagnostic and driver of novel light–matter interactions.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Quantification of heterogeneous, irreversible lithium plating in extreme fast charging of lithium-ion batteries

Realization of extreme fast charging (XFC, ≤15 minutes) of lithium-ion batteries is imperative for the widespread adoption of electric vehicles. However, dramatic capacity fading is associated with XFC, limiting its implementation. To quantitatively elucidate the effects of irreversible lithium plating and other degradation mechanisms on the cell capacity, it is important to understand the links between lithium plating and cell degradation at both the local and global (over the full cell) scales. Here, we study the nature of local lithium plating after hundreds of XFC cycles (charging C-rates ranging from 4C to 9C) in industrially-relevant pouch cells using spatially resolved X-ray diffraction. Our results reveal a spatial correlation at the mm scale between irreversible lithium plating on the anode, inactive lithiated graphite phases, and local state-of-charge of the cathode. In regions of plated lithium, additional lithium is locally and irreversibly trapped as lithiated graphite, contributing to the loss of lithium inventory (LLI) and to a local loss of active anode material. The total LLI in the cell from irreversibly plated lithium is linearly correlated to the capacity loss in the batteries after XFC cycling, with a non-zero offset originating from other parasitic side reactions. Finally, at the global (cell) scale, LLI drives the capacity fade, rather than electrode degradation. We anticipate that the understanding of lithium plating and other degradation mechanisms during XFC gained in this work will help lead to new approaches towards designing high-rate batteries in which irreversible lithium plating is minimized.

25 ENERGY STORAGE↗
DOE OSTI2024

An Na/TM-site Mg substituted P2-Na 2/3 [Fe 1/3 Mg 1/12 Mn 7/12 ]O 2 cathode with extremely high capacity for sodium-ion batteries

The anionic redox reaction (ARR) has become a hot topic in battery research due to its ability to provide high energy density. Nevertheless, there are still many issues in Na-based layered oxides with the ARR, such as large voltage hysteresis, lattice oxygen loss, irreversible structural changes, and cation migration in the TM layer, resulting in structural collapse and poor electrochemical performance. Herein, a series of Na 2/3 [Fe 1/3 Mg x Mn 2/3–x ]O 2 cathodes are synthesized using a traditional solid-state reaction method. The effectiveness of Mg substitution amounts and site occupancy in regulating the reversibility of the ARR has been explored using various experimental techniques. Surprisingly, the well-designed Na/TM-site Mg substituted P2-Na 2/3 [Fe 1/3 Mg 1/12 Mn 7/12 ]O 2 exhibits an extremely high initial reversible capacity of ~253.21 mA h g –1 , equivalent to ~0.94 e – transfer, which is contributed by both cationic and anionic redox reactions as confirmed by hard X-ray absorption spectroscopy (hXAS) and soft X-ray absorption spectroscopy (sXAS) analyses. In addition, the improved cycling and high-rate performance of the P2-Na 2/3 [Fe 1/3 Mg 1/12 Mn 7/12 ]O 2 are achieved by a well-maintained crystal structure and the highly reversible anionic redox reaction of O 2– /O n– . Finally, these in-depth studies provide crucial knowledge for the development and understanding of cathode materials with a highly reversible ARR for low-cost and high-energy sodium-ion batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Recent efforts of vapour-phase strategies for EUV resist toward high- and hyper-NA extreme ultraviolet lithography

Extreme ultraviolet lithography (EUVL, λ = 13.5 nm) is critical for sub-1 nm technology nodes but remains constrained by inherent trade-offs among resolution, line-edge roughness (LER), and sensitivity. Stochastic effects originating from photon shot noise, low-energy secondary electron blur, and the random distribution of resist components further limit its advancement toward high numerical-aperture (NA, NA = 0.55) and hyper-NA (NA ≥0.75) EUVL. While the optimization of spin-on chemically amplified resists (CARs) continues, metal-oxide resists (MORs) have emerged as strong candidates for next-generation EUVL by incorporating metals with high EUV absorption coefficients, which enhances both resist sensitivity and etch resistance during pattern transfer. Besides spin-coating, recent advances in vapour-phase techniques, such as vapour-phase infiltration (VPI), chemical vapour deposition (CVD), and molecular atomic layer deposition (MALD), offer promising pathways to achieve new resist platforms, such as dry resists, that satisfy the stringent thickness and uniformity requirements of next-generation EUVL. These methods enable the direct incorporation of metal species into existing resist matrices or the formation of hybrid inorganic–organic resist platforms, thereby improving film uniformity, etch durability, and pattern fidelity while mitigating stochastic defects. This review highlights the latest advancements in vapour-phase-synthesized EUV resists, emphasizing material design, lithographic performance, and the underlying exposure mechanisms. Although still emerging, vapour-phase strategies are paving the way for an all-dry integration framework that could improve EUV patterning workflows and meet the demands of future technology nodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural and kinetic characterization of an acetoacetyl-Coenzyme A: acetate Coenzyme A transferase from the extreme thermophile Thermosipho melanesiensis

Family 1 Coenzyme A transferases (CtfAB) from the extremely thermophilic bacterium, Thermosipho melanesiensis, has been used for in vivo acetone production up to 70°C. This enzyme has tentatively been identified as the rate-limiting step, due to its relatively low-binding affinity for acetate. However, existing kinetic and mechanistic studies on this enzyme are insufficient to evaluate this hypothesis. Here, kinetic analysis of purified recombinant T. melanesiensis CtfAB showed that it has a ping-pong bi-bi mechanism typical of Coenzyme A (CoA) transferases with Km values for acetate and acetoacetyl-CoA of 85 mM and 135 μM, respectively. Product inhibition by acetyl-CoA was competitive with respect to acetoacetyl-CoA and non-competitive with respect to acetate. Crystal structures of wild-type and mutant T. melanesiensis CtfAB were solved in the presence of acetate and in the presence or absence of acetyl-CoA. These structures led to a proposed structural basis for the competitive and non-competitive inhibition of acetyl-CoA: acetate binds independently of acetyl-CoA in an apparent low-affinity binding pocket in CtfA that is directly adjacent to a catalytic glutamate in CtfB. Similar to other CoA transferases, acetyl-CoA is bound in an apparent high-affinity binding site in CtfB with most interactions occurring between the phospho-ADP of CoA and CtfB residues far from the acetate binding pocket. This structural-based mechanism also explains the organic acid promiscuity of CtfAB. High-affinity interactions are predominantly between the conserved phospho-ADP of CoA, and the variable organic acid binding site is a low-affinity binding site with few specific interactions.

Biochemistry & Molecular Biology↗
DOE OSTI2022

J-PLUS: Uncovering a large population of extreme [OIII] emitters in the local Universe

Over the past decades, several studies have discovered a population of galaxies that undergo very strong star formation events. They are called extreme emission line galaxies (EELGs). We exploit the capabilities of the Javalambre Photometric Local Universe Survey (J-PLUS), a wide-field multifilter survey, with which 2000 square degrees of the northern sky are already observed. We use it to identify EELGs at low redshift by their [OIII]5007 emission line. We intend to provide a more complete, deep, and less biased sample of local EELGs. We selected objects with an excess of flux in the J-PLUS medium-band J0515 filter, which covers the [OIII] line at z < 0.06. We removed contaminants (stars and higher-redshift systems) using J-PLUS and WISE infrared photometry, with SDSS spectra as a benchmark. We performed spectral energy distribution fitting to estimate the physical properties of the galaxies: line fluxes, equivalent widths (EWs), masses, stellar population ages, and so on. We identify 466 EELGs at z < 0.06 with [OIII] EW over 300 Å and an r-band magnitude below 20, of which 411 were previously unknown. Most show compact morphologies, low stellar masses (log(M • /M ⊙ ) ~ 8.13 –0.58 +0.61 ), low dust extinction (E( B–V ) ~ 0.1 –0.1 +0.2 ), and very young bursts of star formation (3.0 –2.0 +2.7 Myr). Our method is up to ~20 times more efficient in detecting EELGs per Mpc 3 than broadband surveys, and it is as complete as magnitude-limited spectroscopic surveys (but reaches fainter objects). The sample is not directly biased against strong Hα emitters, in contrast with works using broadband surveys. We demonstrate that J-PLUS can identify a large sample of previously unknown EELGs showing unique properties following a clear selection process. A fraction of the EELGs are probably similar to the first galaxies in the Universe, but they are at a much lower redshift, which makes them ideal targets for follow-up studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Extreme Compression for Large Scale Data Store

For the last 5 years Accelogic pioneered and perfected a radically new theory of numerical computing codenamed “Compressive Computing”, which has an extremely profound impact on real-world computer science [1]. At the core of this new theory is the discovery of one of its fundamental theorems which states that, under very general conditions, the vast majority (typically between 70% and 80%) of the bits used in modern large-scale numerical computations are absolutely irrelevant for the accuracy of the end result. This theory of Compressive Computing provides mechanisms able to identify (with high intelligence and surgical accuracy) the number of bits (i.e., the precision) that can be used to represent numbers without affecting the substance of the end results, as they are computed and vary in real time. The bottom line outcome would be to provide a state-of-the-art compression algorithm that surpasses those currently available in the ROOT framework, with the purpose of enabling substantial economic and operational gains (including speedup) for High Energy and Nuclear Physics data storage/analysis. In our initial studies, a factor of nearly x4 (3.9) compression was achieved with RHIC/STAR data where ROOT compression managed only x1.4.In this contribution, we will present our concepts of “functionally lossless compression”, have a glance at examples and achievements in other communities, present the results and outcome of our current, ongoing R&D, as well as present a high-level view of our plan to move forward with a ROOT implementation that would deliver a basic solution readily integrated into HENP applications. As a collaboration of experimental scientists, private industry, and the ROOT Team, our aim is to capitalize on the substantial success delivered by the initial effort and produce a robust technology properly packaged as an open-source tool that could be used by virtually every experiment around the world as means for improving data management and accessibility.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Extreme measurements with Photonic Doppler Velocimetry (PDV)

Photonic Doppler Velocimetry (PDV) is a fiber-based diagnostic for the extreme conditions created by high-speed impact, explosive detonation, electrical pulsed power, and intense laser ablation. PDV is a conceptually simple application of the optical Doppler effect, but measurements above 1 km/s only became practical at the beginning of the twenty-first century. In this work, I discuss the evolution of PDV, its operational details, practical analysis, and outstanding challenges.

47 OTHER INSTRUMENTATION↗