Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Ionizing mechanisms in a cesium plasma irradiated with a ruby laser

A cesium filled diode--laser plasmadynamic converter was built to investigate the feasibility of converting laser energy to electrical energy at large power levels. Experiments were performed with a pulsed ruby laser to determine the quantity of electrons and cesium ions generated per pulse of laser beam and to determine the output voltage. A current density as high as 200 amp/sq cm from a spot of approximately 1 sq mm area and an open circuit voltage as high as 1.5 volts were recorded. A qualitative theory was developed to explain these results. In the operation of the device, the laser beam evaporates some of the cesium and ionizes the cesium gas. A dense cesium plasma is formed to absorb further the laser energy. Results suggest that the simultaneous absorption of two ruby laser photons by the cesium atoms plays an important role in the initial ionization of cesium. Inverse bremsstrahlung absorption appears to be the dominant mechanism in subsequent processes. Recombinations of electrons and cesium ions appear to compete favorably with the simultaneous absorption of two photons.

Shimada, K.↗
NASA NTRS1975

Review of aircraft noise propagation

The current state of knowledge about the propagation of aircraft noise was reviewed. The literature on the subject is surveyed and methods for predicting the most important and best understood propagation effects are presented. Available empirical data are examined and the data's general validity is assessed. The methods used to determine the loss of acoustic energy due to uniform spherical spreading, absorption in a homogeneous atmosphere, and absorption due to ground cover are presented. A procedure for determining ground induced absorption as a function of elevation angle between source and receiver is recommended. Other factors that affect propagation, such as refraction and scattering due to turbulence, which were found to be less important for predicting the propagation of aircraft noise, are also evaluated.

Putnam, T. W.↗
NASA NTRS1979

Cosmic ray ionization of the Jovian atmosphere

An approximate form of the Boltzmann equation has been used to obtain local ionization rates due to the absorption of galactic cosmic rays in the Jovian atmosphere. It is shown that the muon flux component of the cosmic-ray-induced cascade may be especially important in ionizing the atmosphere at levels where the total number density exceeds 10 to the 19th per cu cm (well below the ionospheric layers produced by solar EUV). A model containing both positive and negative ion reactions has been employed to compute electron and ion number densities. Peak electron number densities of the order of 1000 per cu cm may be expected even at relatively low magnetic latitudes. The dominant positive ions are NH4(+) and CnHm(+) cluster ions, with n at least 2; it is suggested that the absorption of galactic cosmic-ray energy at such relatively high pressures in the Jovian atmosphere (M about 10 to the 18th to 10 to the 20th per cu cm) and the subsequent chemical reactions may be instrumental in the local formation of complex hydrocarbons.

Capone, L. A.↗
NASA NTRS1979

Electromagnetic power absorber

A structure is presented with a surface portion of dielectric material which passes electromagnetic radiation and with a portion below the surface which includes material that absorbs the radiation, the face of the structure being formed with numerous steep ridges. The steepness of the dielectric material results in a high proportion of the electromagnetic energy passing through the surface for absorption by the absorbing material under the surface. A backing of aluminum or other highly heat-conductive and reflective material lies under the face and has very steep protuberances supporting the absorbing and dielectric materials.

Iwasaki, R. S.↗
NASA NTRS1983

Heavy-ion total and absorption cross sections above 25 MeV/nucleon

Within the context of a double-folding optical potential approximation to the exact nucleus-nucleus multiple-scattering series, eikonal scattering theory is used to generate tables of heavy ion total and absorption cross sections at incident kinetic energies above 25 MeV/nucleon for use in cosmic ray high-energy heavy ion transport and shielding studies. Comparisons of predictions with nucleus-nucleus experimental data show excellent agreement except at the lowest energies, where the eikonal approximation may not be completely valid. Even at the lowest energies, however, agreement is typically within 20 percent.

Townsend, L. W.↗
NASA NTRS1984

The effect of direct and reflected radiation on the temperatures of space structures

As an orbiting structure passes from the bright side to the dark side of the earth, substantial differences in surface heating may take place due to direct sunlight and albedo. Most structures are built of convex curved elements to spread out the reflected energy. A change in the shortwave absorptivity and emissivity maintains the temperature of electronic components within a narrow range. Temperature extremes may also be reduced by the use of thermal capacity of the system or by shielding the surface from direct sunlight. For an instrument deployed from a Shuttle, a temperature must be established for it in the cargo bay before deployment. The effect of obstructed views by surfaces such as the Shuttle arm complicates solar flux computations because of the object's mobility. For typical orbits, the earth's albedo and the direct long wavelength radiation may be as much as 30 percent of the direct solar flux. Irradiation due to direct and reflected solar, long wave radiation and reflected radiation from earth, and from Shuttle surfaces is largely dependent on the specular reflection from the radiators as the Shuttle rolls and its surfaces block the sun. Through a judicious choice of surface properties, thermal capacitance and orbit attitude programming, the temperature response of a system can be controlled.

Emery, A. F.↗
NASA NTRS1989

The UV photochemistry of C2N2

The absorption, emission, and photodissociation yield spectra of C2N2 were measured in the 220 and 210 nm region near the 4(0)1 and 1(0)1 4(0)1 bands of the A 1 sigma + from the X 1 sigma + system. The emission spectrum showed very few lines which appeared in the absorption spectrum. Moreover, the emission had 660 ns lifetime and, at 210 nm a very large electronic emission quenching rate. Laser induced fluorescence was used to measure the relative yield of CN radicals as a function of photolysis wavelength. This spectrum seemed to follow the absorption spectrum below the dissociation threshold. Energy in the CN fragments appeared to be statistically distributed.

Halpern, Joshua B.↗
NASA NTRS1991

Persistence and change in the soft X-ray spectrum of the quasar PG 1211 + 143

The present study examines two Einstein and three Exosat observations of PG 1211 + 143 over a 6-yr baseline which show that strong steep-spectrum low-energy X-ray emission is a persistent feature of this quasar. Exosat observations of PG 1211 + 143 detected an increase of a factor of 2.3 in its steep soft X-ray flux during 18 days. It is concluded that the bulk of the soft X-ray emission of PG 1211 + 143 comes from a region less than 5 x 10 to the 16th cm across. In another interval of 193 days, the soft X-rays decreased by a factor of 3.7. In the same interval the hard X-rays decreased by a factor of 1.6 + or - 0.05, which suggests a connection between the two energy regimes and argues against variable absorption causing the soft X-ray variations. It is contended that in order to decrease in luminosity so rapidly, a thermal source in PG 1211 + 143 would have to be optically thick to both electron scattering and free-bound absorption.

Elvis, Martin↗
NASA NTRS1992

Measurements of induced radioactivity in some LDEF samples

Twenty-six stainless steel trunnion samples, five aluminum end support retainer plate samples, two aluminum keel plate samples, and two titanium clips were analyzed. The shielded high purity germanium detectors used had efficiencies of 33, 54, and 80 percent at 1332 keV. Detector efficiencies as a function of energy and corrections for self-absorption in the samples were determined with calibrated sources and unactivated control samples. Several measurements were made on most samples. In the trunnion samples, Mn-54 and Co-57 were seen and limits were obtained for other isotopes. The results agree well with 1-D activation calculations for an anisotropic trapped proton model. In the aluminum and titanium samples, Na-22 was detected. Other results are presented.

Moss, C. E.↗
NASA NTRS1991

Satellite sweeping of energetic particles at Neptune

The calculation of the absorption rate of charged particles by planetary satellites introduced by Paonessa and Cheng (1987) is generalized to include an arbitrary offset of the dipole center from the planet center, appropriate for Neptune. The absorption rates calculated for particles of fixed L shell, energy, and pitch angle reflect the features of the complicated geometry of the dipole and the moons. This absorption probability is found to be insignificant compared with that of the rings at L shells to which both sets of absorbers map. However, at larger radii the sweeping rate is controlled by the moons, and the corresponding absorption features provide a starting point for understanding the Voyager energetic particle observations.

Paranicas, C. P.↗
NASA NTRS1992

Modelling of IR emission of interstellar clouds. I - Emission of isolated clouds and dust abundance variations

A model for the IR emission and extinction properties of small dust particles is used here to compute the IR emissions in the IRAS photometric bands for a set of isolated, spherical, and nonhomogeneous clouds heated by the local interstellar radiation field. It is predicted that the IR limb brightening (LB) in the IRAS photometric bands caused by selective absorption of UV photons of different energies in the cloud generally happens for central extinctions over 4 mag at 12 microns and greater than 10 mag at 100 microns and intermediate extinctions for the other IRAS bands. The surface brightness in the four IRAS bands is limited to about 0.4, 0.6, 3, and 10 MJy/sr at 12, 25, 60, and 100 microns respectively when no strong density discontinuity is present at the cloud edge.

Bernard, J. P.↗
NASA NTRS1992

Analysis of gamma-ray burst spectra with cyclotron lines

Motivated by the recent developments in the cyclotron resonance upscattering of soft photons or CUSP model of Gamma Ray Burst (GBR) continuum spectra, we revisit a select database of GRBs with credible cyclotron absorption features. We measure the break energy of the continuum, the slope below the break and deduce the soft photon energy or the electron beam Lorentz factor cutoff. We study the correlation (or lack of) between various parameters in the context of the CUSP model. One surprise result is that there appears to be marginal correlation between the break energy and the spectral index below the break.

Kargatis, Vincent↗
NASA NTRS1994

Optically Addressable Spatial Light Modulators

Integrated multiple-quantum-well/Fabry-Perot structure provides high-contrast variation of reflection of reading beam, under control of writing beam. Periodic potential barriers separate photogenerated electrons from holes, leading to long recombination lifetimes and large concentrations of free charge carriers. Concentrations quench excitons or fill energy bands in quantum wells, altering absorption of reading beam.

Maserjian, Joseph↗
NASA NTRS2002

Chandra Observations of Cygnus X-1 at Different Spectral States and Different Orbital Phases

Cygnus X-1 has been observed in different spectral states and at different orbit phases with the Chandra High Energy Transmission Grating Spectrometer. The observed absorption line and edge features are different in these observations. These differences may be caused by the variations of the column density at different orbit phases in a photoionized-wind accretion system. The variations of the absorption features observed in different states may also provide information about changes in the configuration of the corona and accretion disk around the black hole. We present results of our data analysis and discuss the physical implications of these results.

Feng, Yixin↗
NASA NTRS1995

Theoretical nuclear database for high-energy, heavy-ion (HZE) transport

Theoretical methods for estimating high-energy, heavy-ion (HZE) particle absorption and fragmentation cross-sections are described and compared with available experimental data. Differences between theory and experiment range from several percent for absorption cross-sections up to about 25%-50% for fragmentation cross-sections.

NASA Discipline Radiation Health↗
NASA NTRS2011

Excitation/Detection Strategies for OH Planar Laser-Induced Fluorescence Measurements in the Presence of Interfering Fuel Signal and Absorption Effects

Planar laser-induced fluorescence (PLIF) excitation/detection methods have been applied to obtain spatial distributions of the hydroxyl [OH] reacting intermediary and hydrocarbon [HC] primary species in laminar and turbulent combustion reactions. In this report, broadband and narrowband excitation/filtering techniques are explored to identify an optimal experimental configuration yielding significant fluorescent signal with low absorption losses. The combustion environments analyzed include 1) a laminar non-premixed methane/air flame and 2) a turbulent, non-premixed Jet-A/air fueled flame within a lean flame tube combustor. Hydrocarbon-based fuel and OH were excited via the R1 (1), R1(10) and R2(7) transitions of the A(sup 2)Epsilon(+) X(sup 2)pi(1,0) band using a broadband Nd:YAG pumped optical parametric oscillator (OPO) and narrowband Nd:YAG/dye laser with ultraviolet frequency extension (UVX) package. Variables tested for influence on fluorescent signal and absorption characteristics were excitation line, laser energy, exciting linewidth, combustion reactants, and test flow conditions. Results are intended to guide the transition from a dye/UVX laser to an OPO system for performing advanced diagnostics of low-emission combustion concepts.

Heath, Christopher M.↗
NASA NTRS2011

Complete Hard X-Ray Surveys, AGN Luminosity Functions and the X-Ray Background

AGN are believed to make up most of the Cosmic X-Ray Background (CXB) above a few keV, but this background cannot be fully resolved at energies less than 10 keV due to absorption. The Swift/BAT and INTEGRAL missions are performing the first complete hard x-ray surveys with minimal bias due to absorption. The most recent results for both missions will be presented. Although the fraction of the CXB resolved by these surveys is small, it is possible to derive unbiased number counts and luminosity functions for AGN in the local universe. The survey energy range from 15-150 keV contains the important reflection and cutoff spectral features dominate the shape of the AGN contribution to the CXB. Average spectral characteristics of survey detected AGN will be presented and compared with model distributions. The numbers of hard x-ray blazars detected in these surveys are finally sufficient to estimate this important component's contribution the cosmic background. Constraints on CXB models and their significance will be discussed.

Tueller, Jack↗
NASA NTRS2026

Optimization of X-ray Absorbers for High-Resolution TES Detectors in NewATHENA X-IFU

NewATHENA’s X-ray Integral Field Unit (X-IFU) uses a large-format array of Transition Edge Sensor (TES) microcalorimeters coupled with absorbers made of gold and bismuth providing 4 eV FWHM resolution up to 7 keV in the 0.2- 12 keV band. X-ray absorbers must be thick enough for photon absorption, maintain low heat capacity for energy resolution, and have good thermalization properties. The X-IFU requires total Quantum Efficiency (QE) of 96%, 87%, and 63% at 1, 7, and 9.5 keV, respectively. Optimal thicknesses are 1.05 µm gold and 5.5 µm bismuth to achieve 0.731 pJ/K at 90 mK and 87% QE at 7 keV. While typical TES absorbers are 3-4 µm thick, producing the required 5.5 µm Bi absorbers via standard electroplating creates enlarged grains and surface roughness. The increased roughness and grain size variability produced with our standard recipe have resulted in instances of 1) low energy spectral tails 2) spectral broadening of the energy resolution and 3) thermal shorts between pixels when a large grain bridges the gap between absorbers. In this study, we have introduced a new fabrication process and altered the morphology of the thick Bi through changes in the electroplating process. The process changes are intended to address all three issues as well as reduce particulate contamination observed on the finished detector arrays.

Absorber↗