SEARCH · Engineering Papers

Results for “Embedded”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Shear-stress intensity factors for elastic sheets with cover plates

Shear stress intensity factors are calculated for three problems concerning inextensible cover plates either bonded to or embedded in an elastic sheet which is under uniaxial tension. The stress intensity factors are small when the ratio of sheet thickness to cover plate length is small and, as the ratio increase, rapidly approach their asymptotic values for infinite sheet thickness. In the problem of the embedded cover plate, the stress intensity factor also depends on the Poisson's ratio of the sheet material. The dependence on Poisson's ratio, however, is significant only when the ratio of sheet thickness to cover plate length is small. Some possible implications of the present results for debonding of reinforced sheets under cyclic loading are briefly discussed.

Fichter, W. B.↗

NASA NTRS1976

Carbon recombination line observations of the sharpless 140 region

Carbon recombination-line emission has been detected at two frequencies from a dark cloud contiguous with the small H II region Sharpless 140. The observations show the dark cloud to be of unusually low temperature and to have a markedly inhomogeneous density distribution, with localized region of high density surrounding one or more embedded stars. The carbon is probably ionized by photons from both the exciting star of S140 and the embedded stars. The dark cloud and S140 apparently represent two stages of star formation which have occurred over a period of at least 500,000 years in adjacent regions of the same dark cloud.

Knapp, G. R.↗

NASA NTRS1977

Supersonic flow about circular cones at large angles of attack - A floating discontinuity approach

The technique of floating shock fitting is adapted to the computation of the inviscid flowfield about circular cones in a supersonic free stream at angles of attack that exceed the cone half-angle. In those regions in which the governing conical equations are mixed elliptic-hyperbolic, the fully hyperbolic form is obtained by the addition of the temporal derivative. The resulting equations are applicable over the complete range of free-stream Mach numbers, angles of attack and cone half-angles for which the bow shock is attached. An explicit finite-difference algorithm is used to obtain the solution by an unsteady relaxation approach. The bow shock, embedded crossflow shock, and vortical singularity in the leeward symmetry plane are all treated as floating discontinuities in a fixed computational mesh. The method yields excellent results for the bow and embedded shocks, however, the solution in the leeward symmetry plane exhibits viscous-like effects and does not appear to adequately predict the behavior of the vortical singularity.

Daywitt, J.↗

NASA NTRS1979

Method for fabricating solar cells having integrated collector grids

A heterojunction or Schottky barrier photovoltaic device comprising a conductive base metal layer compatible with and coating predominately the exposed surface of the p-type substrate of the device such that a back surface field region is formed at the interface between the device and the base metal layer, a transparent, conductive mixed metal oxide layer in integral contact with the n-type layer of the heterojunction or Schottky barrier device having a metal alloy grid network of the same metal elements of the oxide constituents of the mixed metal oxide layer embedded in the mixed metal oxide layer, an insulating layer which prevents electrical contact between the conductive metal base layer and the transparent, conductive metal oxide layer, and a metal contact means covering the insulating layer and in intimate contact with the metal grid network embedded in the transparent, conductive oxide layer for conducting electrons generated by the photovoltaic process from the device.

Evans, J. C., Jr.↗

NASA NTRS1979

A shock capturing application of the finite element method

The paper is concerned with the development of finite element algorithms for the solution of viscous compressible flow problems with possible embedded shocks and recirculation regions. As a first step, the calculation in Cartesian coordinates of uniform flow on a rectangular region which encounters an embedded oblique shock with known turning angle is considered. A code is developed which is then used for computation of the boattail plume simulator problem in cylindrical coordinates. Oblique shock calculations are performed and the results are compared with a known finite difference solution.

Cooke, C. H.↗

NASA NTRS1980

Influence of auditory fatigue on masked speech intelligibility

Intelligibility of PB word lists embedded in simultaneous masking noise was evaluated before and after fatiguing-noise exposure, which was determined by observing the number of words correctly repeated during a shadowing task. Both the speech signal and the masking noise were filtered to a 2825-3185-Hz band. Masking-noise leves were varied from 0- to 90-dB SL. Fatigue was produced by a 1500-3000-Hz octave band of noise at 115 dB (re 20 micron-Pa) presented continuously for 5 min. The results of three experiments indicated that speed intelligibility was reduced when the speech was presented against a background of silence but that the fatiguing-noise exposure had no effect on intelligibility when the speech was made more intense and embedded in masking noise of 40-90-dB SL. These observations are interpreted by considering the recruitment produced by fatigue and masking noise.

Parker, D. E.↗

NASA NTRS1982

Retractor Tool for Brain Surgery

Proposed brain-surgery tool has an octogonal fixture for positioning latex tube over incision. Eight stainless-steel wires embedded in latex extend to hold positioning fixture. Another eight are also embedded in the latex. Concentric sleeves are successively inserted into expandable latex tube. The first sleeve is placed over a solid rod. Last sleeve is a stainless-steel tube 1 inch in diameter. It is overcoated with Teflon (or equivalent) material.

Helms, R.↗

NASA NTRS1980

Hybrid-finite-element analysis of some nonlinear and 3-dimensional problems of engineering fracture mechanics

In this paper, efficient numerical methods for the analysis of crack-closure effects on fatigue-crack-growth-rates, in plane stress situations, and for the solution of stress-intensity factors for arbitrary shaped surface flaws in pressure vessels, are presented. For the former problem, an elastic-plastic finite element procedure valid for the case of finite deformation gradients is developed and crack growth is simulated by the translation of near-crack-tip elements with embedded plastic singularities. For the latter problem, an embedded-elastic-singularity hybrid finite element method, which leads to a direct evaluation of K-factors, is employed.

Atluri, S. N.↗

NASA NTRS1981

Detection of acoustic emission in composites by optical fiber interferometry

Acoustic emission in prestressed composite panels using embedded single mode optical fiber was detected. Static loading of the composite matrix produces acoustic emission events, pulsed ultrasonic waves, which mechanically modulate the embedded fiber geometry and phase modulate the transmitted optical field. The modulation is detected by optical interferometry and Fourier optical processing techniques to produce an electronic signal proportional to acoustic field amplitude integrated along the length of the fiber in the specimen. Static and dynamic calibration of the detection system is discussed and frequency domain characterization of the acoustic field interaction with the fiber is presented.

Wade, J. C.↗

NASA NTRS1982

Inverse transonic airfoil design methods including boundary layer and viscous interaction effects

A body-fitted grid embedment technique applicable to inviscid transonic airfoil flow field analysis was developed and verified through a series of tests. Test cases used to verify the technique show that the accuracy of the solution was increased by grid embedding. This enhancement of the solution is especially true when small supercritical zones occur which cannot be adequately described using the main grid only. Results obtained with the SKANFP full potential program are considered with regard to the massive separated flow and high lift and the undesirable unrealistic 'bump' in the vicinity of the separation point due to a mismatch between the unseparated and separated pressure distributions. Techniques used to eliminate this feature are discussed.

Carlson, L. A.↗

NASA NTRS1981

4-8 micron spectrophotometry of OH 0739-14

Spectrophotometry of the dust-embedded late-type star OH 0739-14 shows an absorption feature at 6.0 microns characteristic of H2O ice at temperatures significantly lower than 150 K, confirming the identification of H2O ice in the circumstellar shell in this source. The differences in the infrared spectra of HO 0739-14 and embedded molecular cloud sources are attributed to the different cloud lifetimes and temperature regimes in which the molecules are formed. A lower limit to the mass loss rate of 0.0001 solar mass per year is derived, based on the column density of ice and the size and the expansion velocity of the circumstellar cloud.

Soifer, B. T.↗

NASA NTRS1982

Transonic potential flow and coordinate generation for bodies in a wind tunnel

An accurate method has been developed for computation of transonic potential flow about a 2-D lifting airfoil or an axisymmetric body in a wind tunnel. The computational mesh is nearly orthogonal everywhere and is generated by a sequence of Schwarz-Christoffel transformations and shearings to obtain an '0' grid near the body. A conservative finite-volume scheme for the full-potential equation and exact boundary conditions is used together with 'retarded' density to solve efficiently transonic flow with embedded shocks and large regions of supersonic flow. Supersonic free-stream flows are also solved with captured bow shocks and embedded subsonic regions.

Doria, M. L.↗

NASA NTRS1982

High resolution far-infrared observations of the evolved H II region M16

A balloon-borne telescope was used to map NGC 6611, and three far-IR sources embedded in an extended ridge of emission were detected. It is found that Source I is an unresolved far-IR source, embedded in a molecular cloud, which despite the association of an H2O maser with its source does not exhibit radio continuum emissions. Far-IR sources II and III are associated with ionized gas-molecular cloud interfaces, with the far-IR radiation arising from dust at the boundary heated by the OB cluster. These observations are consistent with models of the later stages of evolution of an H II region.

Mcbreen, B.↗

NASA NTRS1982

New members of the infrared cluster in the Orion Molecular Cloud

Near-infrared high-resolution scans (3.5 arcsec) of the core of the Orion Molecular Cloud (no. 1) have revealed 26 sources. Eleven of these are identified with faint visible stars. The remainder are thought to be highly reddened stars embedded in the molecular cloud and include at least two of the previously known infrared cluster members. Comparison of the distribution of infrared and visible stars on the plane of the sky and in an infrared color-magnitude diagram shows that the obscured infrared sources form a separate cluster of stars. The newly discovered sources appear to fall into two categories: (1) optically identified stars probably on the front surface of the cloud and associated with the Trapezium cluster; and (2) unidentified infrared stars probably associated with the molecular cloud and the embedded infrared cluster. It is plausible that the newly discovered infrared sources in the OMC-1 region are stars less massive than the previously known members and younger than visible stars of similar mass in Orion Association.

Lonsdale, C. J.↗

NASA NTRS1983

TAS: A Transonic Aircraft/Store flow field prediction code

A numerical procedure has been developed that has the capability to predict the transonic flow field around an aircraft with an arbitrarily located, separated store. The TAS code, the product of a joint General Dynamics/NASA ARC/AFWAL research and development program, will serve as the basis for a comprehensive predictive method for aircraft with arbitrary store loadings. This report described the numerical procedures employed to simulate the flow field around a configuration of this type. The validity of TAS code predictions is established by comparison with existing experimental data. In addition, future areas of development of the code are outlined. A brief description of code utilization is also given in the Appendix. The aircraft/store configuration is simulated using a mesh embedding approach. The computational domain is discretized by three meshes: (1) a planform-oriented wing/body fine mesh, (2) a cylindrical store mesh, and (3) a global Cartesian crude mesh. This embedded mesh scheme enables simulation of stores with fins of arbitrary angular orientation.

Thompson, D. S.↗

NASA NTRS1984

Rodent CNS neuron development: Timing of cell birth and death

Data obtained from a staged series of single paired injections of tritiated thymidine to pregnant Wistar rats or C57B16/j mice on selected embryonic days and several postnatal times are reported. All injected specimens were allowed to come to term, each litter culled to six pups and specimens were sacrificed on PN28, with fixation and embedding for paraffin and plastic embedding. The results are derived from serial paraffin sections of PN28 animals exposed to autoradiographic processing and plotted with respect to heavily labelled cell nuclei present in the selected brain stem nuclei and sensory ganglia. Counts from each time sample/structure are totalled and the percentage of cells in the total labelled population/structure represented by each injection time interval plotted.

Keefe, J. R.↗

NASA NTRS1984

Heads up display

A heads up aircraft display which allows the pilot to view the display without diverting his attention from the scene ahead is disclosed. The display is designed for use on propeller driven aircraft comprised of a radially disposed row of lamps embedded in the rear surface of a propeller. Measurements of flight data are made by conventional means and converted into digital signals. These digital signals are applied to graphic generators which control lamp drivers which in turn control lamps through slip rings. The lamps are lit at the appropriate times during each revolution of the propeller to display the flight data in graphic form to the pilot. The combination of graphic generators and radially disposed lamps embedded in an aircraft propeller enables the pilot to view the display without diverting his attention from the scene ahead.

Garner, H. D.↗

NASA NTRS1983

Forecasting trends in NASA flight software development tools

The experience gained in the design and development of Shuttle flight and ground support embedded software systems along with projections of increasing role and size of software in the proposed Space Station and other future NASA projects provides the basis for forecasting substantial changes in the tools and methodologies by which embedded software systems are developed and acquired. Similar changes in software architectures and operator interfaces will lead to substantial changes in the approach and techniques involved in software test and system integration. Increasing commonality among different flight systems and between flight and supporting ground systems is projected, along with a more distributed approach to software acquisition in highly complex projects such as Space Station.

Garman, J. R.↗