Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrolyzers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Renewable hydrogen horizon: Geospatial techno-economic feasibility and life cycle greenhouse gas analysis in the Middle East and North Africa

Renewable hydrogen is receiving increasing attention for its potential as a flexible energy carrier in sectors such as transportation and industry. Specific cost and carbon intensity (CI) of renewable hydrogen production vary largely based on the location, owing to differences in renewable energy resources, as well as the supply chain dynamics. This study maps the techno-economic and life cycle greenhouse gas emissions of renewable hydrogen production in the Middle East and North Africa region, leveraging abundant solar and wind resources. The work investigates the variability in hydrogen costs and CI, optimally sizing proton-exchange membrane (PEM) electrolyzers to account for partial and cyclic loading, and explores standalone versus grid-connected systems. PEM capacity ratios of 52 %–63 % for photovoltaic (PV) systems and 28 %–82 % for wind systems were identified as optimal, with hydrogen production costs ranging from $\$3.8$-$\$4.8$/kg for PV and $2.0-$7.0/kg for wind. CIs span from 1.9 to 3.7 kg CO 2 ,eq /kg H 2 for PV and 0.4–7.7 kg CO 2,eq /kg H 2 for wind systems. The study highlights significant cost and CI reductions achievable with technological advancements and co-product revenue from oxygen and excess electricity sales.

Carbon Intensity↗
DOE OSTI2025

Solid oxide electrolysis cell and stack testing best practices

Solid oxide electrolyzer (SOE) technology is an emerging method for hydrogen production, noted for its superior electrical efficiency. Despite the significant progress made in recent years, the broad development of SOE technology is often constrained by the necessary and extensive "skill of the craft" required to successfully test simple single cell test articles. This may be linked to the dearth of practical and pragmatic guidance within the literature for safe, reliable, and performant test equipment and test procedures. Researchers at the Idaho National Laboratory (INL) have been actively testing SOEs ranging from button cells to stacks up to 500 kW, in collaboration with industry and other national laboratories. Based on operational experience, INL has developed system design procedures that ensure safe and reliable operation of SOE systems with the level of support required for each test. This paper presents key aspects of SOE stack and system testing, including safe design procedures, balance of plant components design, and specific implementations at INL. Practical design details of reactants, heat, and power management are presented along with lessons learned from the SOE test facility operations at INL.

08 HYDROGEN↗
DOE OSTI2023

CO 2 electroreduction favors carbon isotope 12 C over 13 C and facilitates isotope separation

We discovered that CO 2 electroreduction strongly favors the conversion of the dominant isotope of carbon ( 12 C) and discriminates against the less abundant, stable carbon 13 C isotope. Both absorption of CO 2 in the alkaline electrolyte and CO 2 electrochemical reduction favor the lighter isotopologue. As a result, the stream of unreacted CO 2 leaving the electrolyzer has an increased 13 C content, and the depletion of 13 C in the product is several times greater than that of photosynthesis. Using a natural abundance feed, we demonstrate enriching of the 13 C fraction to ~1.3% (i.e., +18%) in a single-pass reactor and propose a scalable and economically attractive process to yield isotopes of a commercial purity. Our finding opens pathways to both cheaper and less energy-intensive production of stable isotopes ( 13 C, 15 N) essential to the healthcare and chemistry research, and to an economically viable, disruptive application of electrolysis technologies developed in the context of sustainability transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An economic analysis of the role of materials, system engineering, and performance in electrochemical carbon dioxide conversion to formate

The development of technologies that utilize carbon dioxide is important to mitigating climate change. The electrochemical reduction of carbon dioxide is one technology that can utilize greenhouse gasses that would be otherwise be emitted to the atmosphere by producing chemicals and fuels from carbon dioxide and electricity. Significant progress has been made in the experimental performance of carbon dioxide reduction systems with novel catalyst designs, new materials, and systems engineering; however, no work has linked such changes in stack design and materials to capital costs for the stack itself. In this study, we present an analysis that accounts for and analyzes the impacts of alternative materials and system architectures on manufactured costs of carbon dioxide reduction stacks, thus providing a framework to understand exactly how these advances impact the at-scale capital costs of these systems. Specifically, we consider the impact that the addition of a catholyte buffer layer has on an electrolyzer reducing carbon dioxide to formate, finding that the cost of manufacturing this part only increases stack costs by about $30/m 2 at high manufacturing rates, while previous work finds that this part improves system performance. This work shows that the links between system performance, materials, and costs are nonlinear, and that achieving low-cost scalability requires optimization of not just performance parameters but also the use of low-cost and highly scalable materials. These results bridge experimental and techno-economic analysis of processes for carbon dioxide reduction, informing researchers by providing a quantifiable estimate of the impact of advances in electrochemical carbon dioxide reduction technology on manufactured stack capital costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Scalable fabrication of high activity nanoporous copper powders for electrochemical CO 2 reduction via ball milling and dealloying

Electrochemical CO 2 reduction (ECR) is a promising technology to close the anthropic CO 2 circle using renewable energy to achieve carbon neutrality. Future commercialization of ECR will require the development of new catalyst synthesis routes that will allow significant upscaling of catalyst production from current research-level milligram quantities to the kilogram scale and beyond while maintaining the activity and selectivity demonstrated at the research level. Here, we report on generating and testing submicron-sized nanoporous copper (npCu) particles by using a scalable approach consisting of ball milling brittle Cu-based intermetallics followed by dealloying to add nanoporosity for high surface area. The resulting npCu particles have been tested in an industry-relevant large area (25 cm 2 ) electrolyzer platform and showed Faraday efficiencies (FE) for ethylene up to 34 % at current densities of 75–100 mA/cm 2 while keeping FE for hydrogen less than 30 %. Our results demonstrate that a combination of ball milling and dealloying is a promising approach to generate large quantities of high activity and high surface area npCu particles for ECR at an industry-relevant scale.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Among engineering materials, ceramics are indispensable in energy applications such as batteries, capacitors, solar cells, smart glass, fuel cells and electrolyzers, nuclear power plants, thermoelectrics, thermoionics, carbon capture and storage, control of harmful emission from combustion engines, piezoelectrics, turbines and heat exchangers, among others. Advances in additive manufacturing (AM) offer new opportunities to fabricate these devices in geometries unachievable previously and may provide higher efficiencies and performance, all at lower costs. This article reviews the state of the art in ceramic materials for various energy applications. The focus of the review is on material selections, processing, and opportunities for AM technologies in energy related ceramic materials manufacturing. The aim of the article is to provide a roadmap for stakeholders such as industry, academia and funding agencies on research and development in additive manufacturing of ceramic materials toward more efficient, cost-effective, and reliable energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis

The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Aging gracefully? Investigating iridium oxide ink's impact on microstructure, catalyst/ionomer interface, and PEMWE performance

Here, in this study, we conducted a thorough investigation of the impact of aging iridium oxide (IrO 2 ) perfluorosulfonic acid ionomer ink for up to 14 days on the properties of the ink and the resulting catalyst layers. We examined ink properties, such as zeta potential, dynamic light scattering (DLS), density, surface tension, and rheology, as functions of ink aging time. To evaluate the microstructure and catalyst/ionomer interface, we employed transmission electron microscopy (TEM), X-ray scattering, and X-ray photoelectron spectroscopy (XPS) techniques. Furthermore, we assessed the effect of ink aging on the performance of proton exchange membrane water electrolyzers (PEMWEs). Our findings reveal that most ink properties remain stable for 14 days. The variations in PEMWE cell performance are minimal, and no clear trend is observed in relation to ink aging time. This study demonstrates that the effects of aging the inks for 14 days on ink properties, catalyst layer structure, catalyst/ionomer interface, and PEMWE performance are negligible, indicating a substantial time window after ink preparation without any significant changes in its properties. These insights provide crucial guidance for the commercial production and coating processes of ink, which is necessary for scaling up PEM technologies to meet future demand.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Performance improvement of proton exchange membrane water electrolysis by surface modification of porous transport layers

Proton exchange membrane water electrolysis (PEMWE) is a promising option for hydrogen production from a variety of energy sources. Cost-effective production of hydrogen with PEMWE requires reduction of costly precious metals as well as optimization of the components and interfaces in the cell. The interface between the platinum-coated titanium porous transport layer (PTL) and catalyst layer (CL) significantly impacts the performance of the electrolyzer cell. Here, we report on two PTL modification methods, mechanical abrasion and chemical etching, which we find improve PEMWE performance by lowering the resistance of the PTL/CL interface. The PTL surface modifications enabled performance improvements up to 77 mV at 4 A cm −2 and reduction of the high frequency resistance, demonstrating that the resistance of the PTL/CL interface is a significant factor in the cell performance. The PTL surface roughness was varied using abrasive materials ranging from 0.1 to 140 μm in grain sizes and chemical etching was found to also increase the surface roughness. The surface roughness was quantified using confocal laser microscopy and the surface oxidation was measured using X-ray photoemission spectroscopy. These results demonstrate that both increasing surface roughness and oxide removal contribute to lowering the PTL/CL interfacial resistance and increasing cell performance.

08 HYDROGEN↗
DOE OSTI2021

Chemically Inert Hydrocarbon-Based Slurries for Rapid Laser Sintering of Thin Proton-Conducting Ceramics

The process of rapid laser sintering of thin BaZrO 3 –BaCeO 3 -based proton-conducting electrolytes is being developed for easy fabrication of ceramic fuel cells and electrolyzers. However, cracks on the electrolytes caused by volume change due to chemical reactions between the basic ceramic constituents and the polar solvents during wet processing has been problematic. In order to address this issue, the use of chemically inert saturated-hydrocarbon-based slurries comprised of hexadecane, polybutene, and a long-chain saturated fatty acid were investigated in this work. By optimizing slurry composition and laser sintering conditions, a 20 mm long, 4 mm wide, 13.5-μm-thick and 97%-dense BaCe 0.7 Zr 0.1 Y 0.07 Sm 0.13 O 3-d membrane showing proton conductivity on the order of 10 –4 S•cm –1 at 600 °C was successfully prepared in just three seconds by laser sintering. As a result, the use of saturated-hydrocarbon-based slurries will facilitate wet processing and rapid laser sintering of proton-conducting ceramic electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Catalysts by pyrolysis: Direct observation of chemical and morphological transformations leading to transition metal-nitrogen-carbon materials

Transition metal-nitrogen-carbon materials (M-N-C catalysts) are promising electrocatalysts in polymer electrolyte fuel cells (PEFCs) and electrolyzer applications. High temperature treatment in inert atmosphere (pyrolysis) is the essential, most common method for the synthesis of M-N-C catalysts and critical to achieve high electrocatalytic activity and electronic conductivity. To this day, despite many uses and successful implementations in materials manufacturing, pyrolysis has been an entirely empirical technology, with process control and optimization relying exclusively on “Edisonian” approach. The knowledge gap in the mechanism about how the precursor is being transformed into catalysts hinders further development of the M-N-C catalysts regardless of the precursor class and processing protocols. In this work, we probed the morphological evolution and chemical transformation of a nitrogen-containing charge transfer organic salt, mixed with transition metal (iron) salt and amorphous silica powder (precursor) during the pyrolysis process via a combination of in situ synchrotron and laboratory-based diagnostic techniques. The pyrolysis process is found to be divided into three stages. During a controlled temperature ramp, the selected organic N-C precursor (nicarbazin) began melting and decomposing just below 400 °C, forming a certain number of micrometer-scale pores and pathways. With increase in temperature from 400 °C to 900 °C, amorphous carbon domains started forming, and reduced (metallic) iron nanoclusters appeared, being dispersed uniformly throughout the carbonaceous matrix. When temperature advanced above 900 °C, graphitization of carbon commenced, associated with appearance and evolution of atomically dispersed metal-nitrogen moieties in the carbonaceous matrix. As the graphitization advanced further, a secondary process of agglomeration of metal nanoparticles occurred. Multi-analytical technique observations conducted here provide a base for rational design and optimization of M-N-C electrocatalysts via pyrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Design of non-fluorinated proton exchange membranes from Poly(Terphenyl fluorenyl isatin) with fluorene-linked sulfonate groups and microblock structures

Proton exchange membranes (PEMs) are essential components in energy storage and conversion devices, such as fuel cells and electrolyzers. Here, in this study, we developed a series of non-fluorinated PEMs from poly(terphenyl fluorenyl isatin) with fluorene-pendent disulfonate groups. These polymers feature a microblock structure composed of hydrophobic blocks, hydrophilic blocks, and alternating blocks, arising from the differences in reactivity, concentration, and solubility between the hydrophobic p-terphenyl and hydrophilic disulfonated fluorene monomers. As a result, the sulfonic acid groups are unevenly distributed along the polymer chains, forming densely charged regions (IEC = 3.52 meq/g) with large ion clusters and lightly charged regions (IEC = 2.16 meq/g) with small ion clusters. This microstructure, combined with the degree of sulfonation, significantly influences the overall properties of the membranes, including robust mechanical strength (47.1–63.2 MPa), high thermal stability (up to 270 °C), low swelling ratio (18–25% at 80 °C), and high proton conductivity (136–169 mS/cm in deionized water at 80 °C). The PFLSH60 membrane demonstrated comparable fuel cell performance to Nafion 212. Its hydrogen crossover current density was more than two times lower (0.86 mA/cm 2 for PFLSH60 compared to 1.83 mA/cm 2 for Nafion 212) under testing conditions of 80 °C and 100% RH. This significantly reduced crossover improves fuel utilization in fuel cell stacks. This work offers valuable insights into the design of robust, high-performance PEMs by systematically analyzing the relationships between membrane structure, properties, and performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ionomers for electrochemical energy conversion & storage technologies

We report ionomers, which are used as polymer electrolyte membranes as well as catalyst binders in membrane electrode assemblies, are a key component of electrochemical energy conversion and storage technologies such as fuel cells, electrolyzers, and flow batteries. The use of ionomers in these clean energy technologies has a long history and there has been considerable progress in developing low-cost, high-performance ionomers in recent years. In this review article, we discuss some highlights from recent developments of ionomers with emphasis on chemically stable, mechanically durable, high-performance hydrocarbon ionomers and their state-of-the-art performance in electrochemical energy conversion devices. Future directions of ionomer research that are important to enhance our understanding and the remaining challenges related to device level applications are addressed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis of highly sulfonated 2,6-diphenyl-p-Phenylene oxide: A highly conductive membrane

Highly sulfonated aromatic polymers are desired for the possible highest performance of polymer electrolytes in fuel cells and electrolyzer applications. Here, we reported the method to prepare highly sulfonated 2,6-diphenyl-p-phenylene oxide (SP3O), a commercially available aromatic polymer, with the highest IEC of 4.42 meq/g. Three sulfonation reagents including chlorosulfonic acid (HSO3Cl), concentrated sulfuric acid (conc. H2SO4), and trimethylsilyl chlorosulfonate (TMSCS) were investigated for single and two-step sulfonation reactions. In addition, DMSO-assisted thermal crosslinking method was applied to prepare crosslinked SP3O membranes to improve their mechanical strength and film-forming ability. Proton exchange membrane from crosslinked SP3O displayed a proton conductivity as high as 250 mS/cm at 95 % RH and 60 °C.

Khomein, Piyachai↗
DOE OSTI2025

Understanding the impact of SPMAK and PEGPEA in crosslinked PEGDA membranes: Methanol-carboxylate co-transport behavior and correlating structure-physicochemical-transport properties

Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.

25 ENERGY STORAGE↗
DOE OSTI2025

Confocal Raman Microscopy as an In Situ Probe of Volume Change in Hydration-Sensitive Polymer Membranes

An approach is described for measuring hydration-induced volume change within ion conductive polymer membranes and thin films by adapting the technique of confocal Raman microscopy. With careful consideration of factors that affect excitation and scattering within the confocal probe volume region, material swelling and deswelling were estimated from the intensities of polymer matrix spectral features. A high numerical aperture oil-immersion objective was used to achieve tight focusing within samples and the efficient collection of Raman scattered light. The approach is demonstrated for a fluorinated cation-exchange ionomer (Nafion) and the hydrocarbon anion-exchange ionomer Sustainion. Samples were monitored while under a nitrogen atmosphere that was cycled between dry and humid (∼50% relative humidity, RH) states. The volume changes estimated from the Raman spectra were in close agreement with those derived from conventional measurements. The reported work advances understanding needed to adapt confocal Raman microscopy for quantitative in situ and operando studies of ionomers within electrochemical devices, such as polymer electrolyte membrane fuel cells and electrolyzers, and lays a foundation for broader applications in the study of hydration-induced polymer swelling and the associated molecular level water and polymer framework structural changes.

Absorption↗
DOE OSTI2023

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Proton-conducting oxides are used in intermediate-temperature (300 °C < T < 700 °C) applications of fuel cells, electrolyzers, membrane reactors, hydrogen pumps, and sensors. The proton conductivity of doped ABO 3 perovskites is partly dependent on the proton concentration and hence on the level of material hydration. However, how the material hydration ability is affected by differences in doping is not fully understood. Here, we show the prospect of proton trapping and detrapping that influences material hydration and dehydration. The proton-trapping influence is significant for Sc-doped BaZrO 3 compared to Y-doped BaZrO 3 . Here, our work offers a perspective to understand how defect interaction/associations influence the hydration ability of proton-conducting oxides. Furthermore, positron annihilation lifetime spectroscopy was revealed to be a valuable technique for studying the proton-trapping phenomena and the defect chemistry of dense proton conductors. Density functional theory calculations also showed that a high hydration level in Sc-doped BaZrO 3 boosts proton migration. In contrast, the effect of boosting the proton migration due to increased hydration is limited for Y-doped BaZrO 3 . This effect, in turn, might explain the trend of conductivity with dopant concentration in doped BaZrO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering of a Coupled Nanocomposite as a High-Performance Protonic Ceramic Fuel Cell Cathode

The lack of high-performance cathode catalysts is a salient issue that bedeviled the commercialization of protonic ceramic fuel cells (PCFCs). Here, in this work, we report a remarkable electrocatalytic activity and stability enhancement of cathode electrodes by engineering a coupled nanocomposite. The as-prepared Pr 0.3 (Ba 0.5 Sr 0.5 ) 0.7 Co 0.8 Fe 0.2 O 3−δ nanocomposite possesses a bulk cubic phase on which homogeneous and intimate orthorhombic PrCo 0.5 Fe 0.5 O 3−δ nanoparticles are uniformly decorated. X-ray diffraction and Raman spectroscopy reveal the excellent thermal stability of the nanocomposite. It achieves a high peak power density of 1.02 W cm –2 based on protonic electrolytes at 600 °C. No noticeable structural degradation is observed over ∼210 h at 550 °C according to scanning electron microscopy analysis. This work demonstrates an effective strategy to boost the performance of perovskite oxides for PCFCs via nanocomposite engineering. It may apply to other catalyst designs and discoveries, such as for batteries, electrolyzers, and membrane reactors.

08 - HYDROGEN↗