Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Bio‐Based Piezo‐ and Thermoresistive Photocurable Sensing Materials from Acrylated Epoxidized Soybean Oil

Abstract Bio‐based photocurable polymers are increasingly in demand as environmentally friendly materials for advanced applications. Together with functional fillers, these represent a next step for the generation of functional and active smart materials, compatible with additive manufacturing technologies. Herein, acrylated epoxidized soybean oil (AESO) mixed with different amounts of reduced graphene oxide (rGO) up to 6 wt% in order to obtain UV‐curable piezoresistive and thermoresistive materials, is reported. It is shown that the addition of rGO to AESO hinders the curing process, but always maintains double bond conversions higher than 50%. Composites are characterized by a good dispersion of micrometric filler clusters. Further, the thermal stabilities are close to 300 °C and crosslinking degrees are above 1.75 mmol cm –3 . The Young modulus of the composites decreases with the addition of the rGO fillers, in particular for the higher filler contents, and electrical conductivities up to 0.13 S m –1 are obtained for the composites with the highest rGO content. UV‐curable composites with piezoresistive and thermoresistive responses suitable for applications are thus obtained, characterized by gauge factors around 26 for deformations up to 2% and maximum thermoresistive sensitivity of S = 0.43, values similar to the values obtained for petroleum‐based materials.

Mendes‐Felipe, Cristian↗
DOE OSTI2022

Atomically Resolved Electrically Active Intragrain Interfaces in Perovskite Semiconductors

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples. These intragrain interfaces include composition boundaries formed by heterogeneous ion distribution, stacking faults resulted from wrongly stacked crystal planes, and symmetrical twinning boundaries. The atomic-scale imaging of these intragrain interfaces enables us to build unequivocal models for the ab initio calculation of electronic properties. Our results suggest that these structure interfaces are generally electronically benign, whereas their dynamic interaction with point defects can still evoke detrimental effects. This work paves the way toward a more complete fundamental understanding of the microscopic structure-property-performance relationship in metal halide perovskites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Repetitively pulsed nanosecond discharge plasma decay in propane–oxygen gas mixture in the presence of a heating electric field

Plasma decay in the afterglow of a repetitively pulsed nanosecond discharge in a stoichiometric propane–oxygen mixture was experimentally investigated when a weak heating DC electric field was applied and in its absence. The discharge was ignited at room gas temperature and a pressure of 1–2 Torr and was characterized by low specific energy inputs (<0.004 eV per molecule in one pulse). Using microwave interferometry, the temporal evolution of the electron density during plasma decay was studied, and the effective recombination coefficients were obtained from data processing. It was shown that the rate of plasma decay behaved in a non-monotonic manner with increasing degree of propane oxidation; at first the decay rate grew, then passed through a maximum, fell and saturated in the limit of a large (~2000) number of pulses. In this limit, the effect of the heating DC electric field on the plasma decay decreased with approaching chemical equilibrium. Numerical simulation of the observed effects was performed for low and high oxidation degrees of propane taking into account changes in the composition of positive ions in the plasma. Good agreement was obtained between measurements and calculations of the electron density during plasma decay in these cases. Here it was shown that the formation of cluster ions in the discharge afterglow plays a fundamental role. The plasma decay was controlled by electron recombination with hydrocarbon cluster ion at low oxidation degree of propane and with water cluster (hydrated) ions at high oxidation degree. A hypothesis was proposed to explain the observed nonmonotonic behavior of the plasma decay rate with an increase in the propane oxidation in the discharge, based on the formation of hydrated hydrocarbon ions C x H y + (H 2 O) k at moderate oxidation degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemical Compensation Challenges in Processing Antiferroelectric PbZrO 3 Thin Films

The electric field-induced antipolar-to-polar phase transition in antiferroelectric materials is accompanied by large changes in the structural and functional response, making them attractive for many applications ranging from pulsed energy capacitors to high-strain-high (blocking-)force actuators, solid-state heating and cooling systems, and optoelectronic devices. PbZrO 3 , as an end member of the PZT, (x)PbZr 1–x Ti x O 3 , solid solution, has been the subject of many studies. However, processing of perovskite PbZrO 3 is extremely challenging due to phase instabilities induced by Pb loss at the temperatures necessary for perovskite crystallization. Here, we discuss the challenges associated with Pb loss, as well as its compensation through bulk Pb overstoichiometry and interfacial PbO additions, in chemical solution processed, highly oriented PbZrO 3 thin films. For both 042 o - and 001 o -oriented (o-orthorhombic distortion) PbZrO 3 thin films, the crystallization interfaces are the most important contributors to Pb loss and off-stoichiometric outcomes, and no single approach was sufficient to address these challenges. Pb-rich and Pb-deficient nonperovskite phases including ZrO x were only observable through microscopic characterization, and X-ray diffraction alone could not rule out the presence of such secondary phases. “Ideal” macroscopic antiferroelectric polarization-electric field double hysteresis curves were observed despite (at times) the large presence of secondary phases. However, reduced saturation polarization and increased phase transition electric fields were observed concomitantly with the presence of secondary phase(s) and tentatively assigned to the voltage drop across the ZrO x nanocrystals. Based on these results, it is imperative that the presence of secondary phases always be addressed (beyond X-ray diffraction spectra) in order to correctly evaluate the properties of antiferroelectric films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Dilute Magnetism in a Topological Insulator

Three-dimensional (3D) topological insulator (TI) has emerged as a unique state of quantum matter and generated enormous interests in condensed matter physics. The surfaces of a 3D TI consist of a massless Dirac cone, which is characterized by the Z 2 topological invariant. Introduction of magnetism on the surface of a TI is essential to realize the quantum anomalous Hall effect and other novel magneto-electric phenomena. Here, by using a combination of first-principles calculations, magneto-transport and angle-resolved photoemission spectroscopy (ARPES), we study the electronic properties of gadolinium (Gd)-doped Sb 2 Te 3 . Our study shows that Gd doped Sb 2 Te 3 is a spin-orbit-induced bulk band-gap material, whose surface is characterized by a single topological surface state. Our results provide a new platform to investigate the interactions between dilute magnetism and topology in magnetic doped topological materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Topological Materials for Functional Optoelectronic Devices

The recent realization of topology as a mathematical concept in condensed matter systems has shattered Landau's widely accepted classification of phases by spontaneous symmetry breaking as he famously said, “a particular symmetry property exists or does not exist.” Topological materials (TMs) such as topological insulators and topological semimetals, are characterized by properties that depend on the topology of the band structure. Such dependence has drastic implications on the optical, electrical, and thermal properties of the material. Fundamental physics of TMs is currently under active research in condensed matter, materials science, and high energy physics. Here, recent advances in exploiting the unique properties of TMs to realize functional optoelectronic devices are surveyed. Current and future applications that are, or may be, enabled by their unique properties are discussed. Although many theoretical ideas have been proposed over the past decade or so on using TMs in optoelectronic applications, the focus will be on experimentally realized devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-pressure synthesis, crystal structure, and magnetic properties of the Shastry-Sutherland-lattice oxides BaL n 2 ZnO 5 (L n = Pr, Sm, Eu)

BaPr 2 ZnO 5 , BaSm 2 ZnO 5 , and BaEu 2 ZnO 5 – a series of 4f magnetic insulators comprising the Shastry-Sutherland lattice – were synthesized via a solid-state reaction under high-pressure and high-temperature conditions. The magnetic behaviors are well characterized by the localized 4f electrons of each Ln 3+ (= Pr, Sm, Eu) under the influence of the crystal-electric field of the surrounding ions. The magnetic susceptibility and heat capacity measurements of BaPr 2 ZnO 5 (Pr 3+ ; 4f 2 3 H 4 ) indicate the splitting of the ground state J-multiplet due to the crystal-electric field. BaSm 2 ZnO 5 (Sm 3+ ; 4f 5 6 H 5/2 ) is a strong Van Vleck paramagnet, while BaEu 2 ZnO 5 is non-magnetic due to the 7 F 0 ground state (Eu 3+ ; 4f 6 7 F 0 ). The series of new oxides enriches a group of the Shastry-Sutherland lattice materials and helps to develop a range of two-dimensional quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗
DOE OSTI2021

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

Extreme fast charging (XFC, =15 min charging time) of Li-ion batteries (LIBs) has been proposed as an immediate target to increase the commercial appeal of electric vehicles. However, XFC of LIBs is associated with the degradation of battery performance and safety concerns. Quantitative and simultaneous characterization of various components during cell degradation represents a major experimental challenge. In this work, we outline a methodology for the use of spatially resolved, high-energy X-ray diffraction as a quantitative, in situ method of mapping the degradation of LIBs. We use this approach to study the battery cell capacity loss, both locally (mm scale) and globally over the entire cell (cm scale). Specifically, our workflow allows us to quantify the total amount of plated Li on the anode, as well as its spatial correlation to the structural properties of the anode and cathode. The method complements existing optical methods to resolve the spatial heterogeneity of local degradation mechanisms such as Li plating and provides simultaneous insights into concomitant anode state-of-charge variability. We apply it to commercially relevant single-layer pouch cells with the graphite anode and the LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode. Our results show that Li plating occurs heterogeneously on the graphite anode and that it is spatially correlated to the extent of anode lithiation. In this work, we anticipate that the described workflow will allow for understanding multiscale degradation in energy-storage devices beyond LIBs, where quantitative analysis at a local and global length scale can be performed without the necessity to tear down the device, due to the applicability of high-energy X-rays to probe in situ degradation.

25 ENERGY STORAGE↗
DOE OSTI2025

Efficient Measurement of Length Distribution of 1D Nanoparticles in Solution via Optical Polarimetry

The efficient measurement of the length distribution of nanotubes, nanowires, and other one-dimensional (1D) nanoparticles in solution is important to enable their incorporation into materials and devices and to optimize their processing for properties of interest, such as thermal/electrical conductivity or mechanical strength, in suspensions and composites. We report an electric-field (E-field)-assisted optical-polarimetry technique to measure the length distribution of ensembles of high-aspect-ratio particles in dilute suspension. The degree of alignment of polarizable 1D particles suspended in a fluid under Brownian motion explicitly depends on the E-field strength and the particle length. We show that it is possible to extract the length distribution of 1D nanoparticles suspended in an insulating fluid by applying a range of E-fields and using optical polarimetry to measure the corresponding alignment order parameter. Notably, the method is relatively insensitive to the diameter of the 1D particles, which can be poorly known or vary within a sample. The technique is validated with silver nanowires and carbon nanotubes of known lengths, as well as polymer-depletion-length-separated single-wall carbon nanotube samples with length distributions independently measured with analytical ultracentrifugation. Finally, we demonstrate the ability of the optical-polarimetry technique to quantify changes in the length distribution of ultranarrow, sub-nanometer-diameter single-wall carbon nanotubes under different types and durations of ultrasonication. Within its range of applicability (polarizable 1D nanoparticles in the 0.5 to 15 μm length range, constrained by the voltage stability of the media and the suspended particles), the E-field-assisted optical-polarimetry method is a particularly efficient and accurate method to measure the length distribution of nanowires and nanotubes in suspension.

1D nanoparticles↗
DOE OSTI2021

Methods for tuning plasmonic and photonic optical resonances in high surface area porous electrodes

Abstract Surface plasmons have found a wide range of applications in plasmonic and nanophotonic devices. The combination of plasmonics with three-dimensional photonic crystals has enormous potential for the efficient localization of light in high surface area photoelectrodes. However, the metals traditionally used for plasmonics are difficult to form into three-dimensional periodic structures and have limited optical penetration depth at operational frequencies, which limits their use in nanofabricated photonic crystal devices. The recent decade has seen an expansion of the plasmonic material portfolio into conducting ceramics, driven by their potential for improved stability, and their conformal growth via atomic layer deposition has been established. In this work, we have created three-dimensional photonic crystals with an ultrathin plasmonic titanium nitride coating that preserves photonic activity. Plasmonic titanium nitride enhances optical fields within the photonic electrode while maintaining sufficient light penetration. Additionally, we show that post-growth annealing can tune the plasmonic resonance of titanium nitride to overlap with the photonic resonance, potentially enabling coupled-phenomena applications for these three-dimensional nanophotonic systems. Through characterization of the tuning knobs of bead size, deposition temperature and cycle count, and annealing conditions, we can create an electrically- and plasmonically-active photonic crystal as-desired for a particular application of choice.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Two-fluid and kinetic transport physics of Kelvin–Helmholtz instabilities in nonuniform low-beta plasmas

Hall-magnetohydrodynamic (Hall-MHD) theory, two-fluid simulations, and kinetic simulations are used in this work to investigate the cross-field transport properties of Kelvin–Helmholtz instabilities in nonuniform low-beta collisionless plasmas. Hall-MHD analysis shows how the linear properties of the instability are modified by density gradients and magnetization. High-order accurate two-fluid and kinetic simulations, with complete dynamics of finite-mass electrons and ions, are applied to a suite of parameter cases to systematically assess the effects of diamagnetic drift, magnetization, charge separation, and finite Larmor motion. Initialization of exact two-species kinetic equilibria facilitates the study of isolated physical effects and enables detailed cross-comparisons between two-fluid and kinetic simulations, including for cases where ion gyroradii are comparable to gradient scale lengths. For nonuniform plasmas with significant space charge, the results of two-fluid and kinetic simulations are found to disagree with Hall-MHD predictions. Kelvin–Helmholtz instability growth rates, per unit shear, are shown to be smaller when ion diamagnetic drift and $E \times B$ drift are parallel and larger when the two drifts are antiparallel. The effect is attributed to polarization drift in the shear layer, which leads to redistribution of charge, alters the electric field that drives plasma advection, and consequently modifies growth rates. Instability-induced mass transport for different parameters is characterized in terms of the flux across the shear layer and a simplified diffusion model. Distribution functions from kinetic simulations are shown to deviate substantially from Maxwellian reconstructions, indicating the importance of kinetic physics during the nonlinear phase of the instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

TRANSIENT THERMAL MODELING OF THE HIGH BURNUP DEMONSTRATION RESEARCH PROJECT CASK USING STAR-CCM+ AND COBRA-SFS

The Department of Energy in collaboration with the Electric Power Research Institute is in the process of conducting the High Burnup Demonstration Project. Where the objective is to characterize the performance of high-burnup fuel in long term storage. As part of this demonstration, a TN-32B dry storage cask was instrumented and loaded with spent nuclear fuel at North Anna Nuclear Generating Station in November 2017. The project cask provides a unique opportunity to gain information on spent fuel and cask performance from an in-service operational system. The cask was instrumented with thermocouples inside of the fuel assemblies, then loaded and dried using normal procedures. After the drying process a thermal soak period where the cask was left indoors was used to obtain steady temperatures for model comparison along with surface temperatures. This paper details thermal modeling validation work that was done to model both the steady state and transient cases. Two modeling tools were used to predict temperatures in the cask. The general purpose CFD and heat transfer code STAR-CCM+ was used with both a detailed pin-by-pin model was used along with a more efficient k-effective simplification. The other code is COBRA-SFS, a purpose-built detailed thermal modeling tool developed and maintained at PNNL. Results from all the modeling tools were compared blind to the test data. Each model utilized general design information and compared reasonably well to the blind steady state data using convection and surface temperature boundary conditions. Post-test adjustments were later made to better reflect the “as built” conditions of the cask. Based on lessons learned from the steady state analysis the vacuum drying process was modeled in both codes. Utilizing the measured loading conditions the transient models were able to compare very well with the measured data. Overall the project showed an ability to model spent fuel storage conditions very well and future work is planned to generalize the methodology used for vacuum drying.

Thermal Analysis, Spent Fuel, Dry Storage↗
DOE OSTI2025

Advanced Diagnosis and Accelerated Testing of Balance of System Components for Utility Scale PV Installations: October 1, 2022-September 30, 2024

A study of the durability of PV Balance of System components was performed. Specifically, wire cable jackets and cable connectors were examined within the direct current (DC) PV Power Transmission Chain (PTC). Degraded and failed samples have been obtained from utility PV installations to provide feedback on the degradation modes and the related damage-enabling considerations in today's PV systems. An industry interface group (including system owners, system inspectors, component manufacturers, and test labs) was used to help identify and obtain field-failed samples, for feedback (including samples and experimental design), and to facilitate the subsequent dissemination of the results of this study. Samples were empirically studied using accelerated stress testing with steady-state conditions (cable jackets) in addition to combined-accelerated stress testing (cable jackets, connectors and uncapped connectors). Steady-state accelerated testing has been performed using at least one applied stressor (e.g. UV light) to aid understanding of jacket durability relative to its application. Component- and material-focused failure analysis was conducted to develop an understanding and advise the PV industry. In-depth characterization will be applied selectively to field- and artificially aged-samples, to gain scientific understanding of the structural, chemical, electrical, mechanical, and thermal properties enabling degradation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Spatiotemporal Structure in Intense THz Pulsed Beams

Optically generated terahertz radiation, with gigavolt per meter (GV/m) electric fields accessible in tabletop experiments, provides a promising source of accelerating gradients for future particle accelerator applications. Manipulation and characterization of radiation is essential for efficiently producing high fields and effectively delivering them to an accelerating structure or interaction region. The talk will cover a method of generating and characterizing high quality and structured terahertz pulsed laser beams for compact particle acceleration.

Hine, George↗
DOE OSTI2024

Frozen Freedom: Unleashing Grocery Store Demand Flexibility: Preprint

Grocery stores consumed approximately 3% of total electricity used by commercial buildings in the U.S. in 2018 (EIA 2018), representing a unique end-use load profile characterized by the critical use of refrigerated display cases. Exploring demand response (DR) scenarios in grocery stores presents an opportunity to enhance the efficiency and sustainability of surrounding communities. In addition, recent studies demonstrate that implementing control algorithms considering demand flexibility strategies can lead to load and peak reductions in standalone refrigerated display cases. Because small business grocery stores operate on thin margins, the energy bill cost savings DR might provide could make a positive difference toward continued operations. Still, uncertainty remains about the extent of demand flexibility potential controls could provide when coupling refrigeration with whole building operation. To enhance economic viability and grid stability, it is essential to quantify the load flexibility capability of grocery stores. Advanced controls can optimize energy consumption by responding to load shedding, shifting, and DR events, as well as daily Time-of-Use (TOU) rates without compromising food safety. Using both quantitative data and interviews with community-based organizations, we developed a full-size store model and two small store models with controlled refrigerated cases, HVAC, and lighting systems based on actual grocery store properties. Through simulations, we have assessed load flexibility strategies with varied DR events. The results highlight potential for energy and peak reduction with advanced or basic controls. However, interviews and data indicate that more support is needed to make DR strategies consistently accessible to small grocery stores.

demand flexibility↗
DOE OSTI2026

Strategies for Flood Resilience and Grid Investment Among Iowa's Electric Distribution Utilities

Flooding poses a growing threat to Iowa's electric distribution system, yet utilities face significant data and modeling challenges in planning effective resilience investments. This report provides a foundational assessment of how distribution utilities in Iowa, investor-owned, municipal, and cooperative, approach resilience planning, with a focus on flood risk. It combines hazard characterization, review of state and utility practices, and application of NLR's Energy Resilience Analysis for Distribution Systems (ERAD) and Capacity Expansion Decision Support for Distribution Networks (CADET) tools. Using FEMA floodplains, Iowa Flood Center depth grids, and utility infrastructure data, the analysis quantifies asset exposure, simulates outage risks, and evaluates resilience strategies such as pole hardening, undergrounding, and substation protection. Results indicate that while feeder-level upgrades provide incremental benefits, the most significant reductions in outage risk are achieved through targeted substation interventions. The report highlights key data gaps, such as limited elevation data and fragility functions, and underscores the need for probability-weighted investment frameworks to address both frequent and catastrophic flood events. These insights aim to support utilities, state agencies, and federal partners in prioritizing resilience investments that safeguard Iowa's electric grid against future flooding.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Grid Value Proposition of Marine Energy

Marine energy technologies convert the energy of ocean waves, and tidal, river, and ocean currents into electricity and other forms of usable energy. The marine energy resource potential in the United States is significant and geographically diverse, with a study commissioned by the U.S. Department of Energy estimating that the nation’s annual marine energy potential is approximately 2,300 TWh/year across the 50 states, or greater than 57 percent of U.S. electricity generation in 2019. However, the marine energy industry still faces hurdles to commercialization. While high costs relative to wind and solar remain a key challenge, other hurdles relate to marine energy’s value streams not being well characterized and not captured by traditional energy comparison metrics like the levelized cost of energy. To address this challenge, this project undertakes several types of analyses to identify and illustrate value propositions for marine energy resources. It provides a fresh framework for considering electric system benefits based on unique marine energy attributes, and provides analyses illustrating and quantifying those benefits. The authors find many opportunities for the deployment of marine energy technologies both in the near term and within typical utility planning timeframes (i.e. up to 20 years). From a resource and technology perspective, marine energy resources can deliver distinct and valuable benefits to different configurations of the grid, whether the bulk system, isolated distribution systems, or remote communities, islands, and microgrids. Marine energy resources can be valuable in increasing technology diversity in a generation portfolio, providing energy where it is otherwise difficult to come by, supporting local resiliency, complementing and being complemented by other resources including solar, wind, and energy storage, and avoiding land constraints.

16 TIDAL AND WAVE POWER↗