SEARCH · Engineering Papers

Results for “EXPECTATION VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Hall effect in LaCrGe 3 at pressures up to 24 kbar and a 𝐻−𝑇 phase diagram of the pressure-induced magnetic phase

LaCrGe 3 is a metallic, itinerant ferromagnet with 𝑇 𝐶 ≈ 86K and an easy magnetic direction along its hexagonal 𝑐 axis. Here we present studies of the 𝐻 ∥ 𝑐 Hall effect in LaCrGe 3 at ambient pressure and under pressures up to 24 kbar. At ambient pressure the anomalous Hall conductivity in the ferromagnetic state reaches a large value of ∼520 Ω − 1 cm −1 . The overall data are consistent with the behavior expected for a ferromagnet with magnetic field applied along its easy axis. Measurements under pressure yield an 𝐻 = 0, 𝑃−𝑇 phase diagram consistent with earlier publications with 𝑇 𝐶 being suppressed with pressure and nonferromagnetic phases appearing for 𝑃 >15 kbar. The data suggest that the observed 𝑇 𝐶 suppression is due to the pressure-dependent exchange interactions rather than suppression of the size of the magnetic moment. Field-dependent Hall resistivity in the higher-pressure, nonferromagnetic state is consistent with the net moment being zero for 𝐻=0. In a finite field there is a sharp anomaly comparable to the one associated with a spin-flip metamagnetic transition. The 𝐻−𝑇 phase diagrams corresponding to a pressure-induced magnetic phase are constructed for several pressures. In conclusion, the Hall data suggest the possibility of the pressure-induced nonferromagnetic phase being a combination of multiple small regions of antiferromagnetic phases with different wave vectors.

Bud'ko, Sergey L. [Ames Laboratory, and Iowa State↗

DOE OSTI2023

A Review of Sensing Technologies for New, Low Global Warming Potential (GWP), Flammable Refrigerants

Commercial refrigeration systems currently utilize refrigerants with global warming potential (GWP) values ranging from 1250 to 4000. The advent of low GWP alternatives (GWP <150) is expected to significantly curtail direct emissions from this segment and greatly influence the ongoing electrification and decarbonization efforts. Most of the low GWP alternatives exhibit flammability risk and hence require robust sensing solutions for a reliable and safe operation of the equipment. This review article aims to provide an overview of different sensing mechanisms suitable for potential applications in systems employing flammable refrigerants, particularly those designated as A2L class. A summary of different A2L refrigerants and their properties is provided followed by a broad review of different classes of sensors, their working principle, transduction method, features, advantages, and limitations. Additionally, key performance characteristics of accuracy, selectivity, sensitivity, dynamic characteristic, and durability among other properties are discussed. Finally, areas of improvement and corresponding approaches are suggested for potential sensors in the successful adoption of A2L class refrigerants.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Experimental study of the partitioning of some platinum group elements (Pd and Ir) between orthopyroxene and silicate melt

Past experiments and observations on natural samples have largely focused on the roles of olivine and chromite in controlling the behaviour of the platinum-group elements (PGE) during melting and solidification, whereas other phases, such as pyroxene, have gone largely uncharacterized. Here, to address this, experiments have been done to measure the partitioning of Pd (with a subset of results for Ir), between orthopyroxene and silicate melt at 1340 °C, 0.1 MPa and log fO 2 of FMQ - 1 to FMQ + 6 (FMQ = Fayalite-Magnetite-Quartz). The X-ray Absorption Near-Edge Structure (XANES) was measured in a subset of experiment glasses. Glass concentrations of Pd (corrected to unit Pd activity) increase from ~6 to ~650 ug/g over the fO 2 range of experiments. The slope of the solubility-fO 2 relation is consistent with Pd 1+ as the dominant oxidation state, with evidence for Pd 0 and Pd 2+ at the lowest and highest experiment fO 2 , respectively. Consistent with this result, the XANES reveal spectral features similar to Pd 0 and Pd 2+ spectral reference materials (specRM) at the most reduced and oxidized synthesis conditions, respectively. Other lines of evidence require the presence of a third melt species, here interpreted to be Pd 1+ . Values of orthopyroxene/melt partition coefficients for Pd (D Pd Opx/melt ) are 0.0051 (+/-0.006) at log fO 2 < ΔFMQ + 3, increasing with fO 2 to a maximum of 0.013 at ~FMQ + 6. Sodium partition coefficients, expected to be similar to Pd, range from 0.0061 (+/-0.00061) at FMQ + 3, increase to 0.007–0.009 at higher fO 2 , but with no clear systematic trend. A value for D Ir Opx-melt of ~0.6 was measured at ~FMQ + 4, indicating significantly more compatible behaviour for Ir relative to Pd. Partitioning results are interpreted in the context of the Blundy-Wood elastic strain model in which the variation in partitioning is related to ionic radius mismatch to an optimal crystallographic site size. Based on the trend in ionic radius with oxidation state, the estimated ionic radius of Pd 1+ in octahedral coordination is similar to Na 1+ , and comparison to previous orthopyroxene-melt partitioning experiments suggests D Pd1+ opx/melt and DNaopx/melt should be nearly identical, consistent with the results of this study. The ionic radius of VI-fold Pd 2+ is close to the optimal M2 site size, so an increased proportion of this species with fO 2 accounts for the larger values of D Pd opx/melt at the highest fO 2 investigated. The much larger partition coefficient for Ir is consistent with the presence of Ir 2+ , whose estimated ionic radius is close to Fe 2+ and Mg 2+ , as well as predictions for the optimal M1 site size. With the assumption that D Pd opx/melt = D Na opx/melt , combined with a revised value for the Pd content of the primitive mantle, a melting model is presented that better reproduces the Pd concentration of high degree melts from sulfide-free mantle sources.

58 GEOSCIENCES↗

DOE OSTI2025

Timeouts Best Practices

This study investigates common timeouts encountered in the electric vehicle (EV) charging communications process. Many different timeouts are defined within the EV charging communications protocols. These timeouts can either be a fixed value or a defined range of values. In both cases, the timeout defines the duration of time for which one or both parties in the communications session are expected to wait for some action or process to complete before terminating the charge attempt. These timeout-based terminations are intended to prevent the charging process from becoming stuck indefinitely in any particular step. These terminations also enable a retry of the terminated charging session to begin. However, misaligned timeout values can have a significant negative impact on the user experience. Premature termination of charging sessions due to inappropriate timeout settings can lead to charging failures, causing inconvenience, wasted time, and frustration for users. These disruptions can degrade the overall user experience, making it essential to carefully manage and align timeout values with the relevant actions and processes to ensure reliable and satisfactory EV charging sessions. The core objective of this study is to boost reliability and enhance user experience by conducting a thorough review of timeout-based issues in EV charging and delivering a set of recommendations to modify these existing timeouts. These recommendations are informed by feedback gathered from multiple EV charging partners. This document is intended to inform electric vehicle supply equipment (EVSE) and EV manufacturers, EV charging infrastructure developers, and policymakers responsible for designing and implementing EV charging protocols and systems.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

Probabilistic Assessment and Uncertainty Analysis of CO2 Storage Capacity of the Morrow B Sandstone—Farnsworth Field Unit

This paper presents probabilistic methods to estimate the quantity of carbon dioxide (CO2) that can be stored in a mature oil reservoir and analyzes the uncertainties associated with the estimation. This work uses data from the Farnsworth Field Unit (FWU), Ochiltree County, Texas, which is currently undergoing a tertiary recovery process. The input parameters are determined from seismic, core, and fluid analyses. The results of the estimation of the CO2 storage capacity of the reservoir are presented with both expectation curve and log probability plot. The expectation curve provides a range of possible outcomes such as the P90, P50, and P10. The deterministic value is calculated as the statistical mean of the storage capacity. The coefficient of variation and the uncertainty index, P10/P90, is used to analyze the overall uncertainty of the estimations. A relative impact plot is developed to analyze the sensitivity of the input parameters towards the total uncertainty and compared with Monte Carlo. In comparison to the Monte Carlo method, the results are practically the same. The probabilistic technique presented in this paper can be applied in different geological settings as well as other engineering applications.

03 NATURAL GAS↗

DOE OSTI2023

Product Consistency Test Results for the LAW HPVR Glasses

This report summarizes the chemical analysis of Product Consistency Test (PCT) leachates received from Pacific Northwest National Laboratory (PNNL). The leachates are from a series of simulated nuclear waste glasses designated Low-Activity Waste High PCT and VHT Response (LAW HPVR) glasses that were designed and fabricated at PNNL. The glasses included both quenched and canister centerline cooled glasses. The reported data will be used in the development, validation, and implementation of enhanced property/composition models for waste glass vitrification at Hanford. The elemental release for the study glasses is reported as normalized concentration (NC i ). NC i of several elements was computed for both the target and measured glass compositions, which were similar, resulting in no significant differences when computing the NC i values. The majority of the glasses exhibited NC B , NC Na , and NC Si values that were greater than the Hanford Tank Waste Treatment Plant (WTP) low-activity waste constraint of 4 g/L. Several blank solutions included with the study glasses had K, Na, and Si concentrations above the analytical detection limit. Additionally, several of the reference glasses that were included with the study glasses had Na concentrations that were higher than expected. The unexpected analyte concentrations in the reference glass and blank solutions were insignificant with respect to the reported NC i values, and are noted for completeness and their experimental relevance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Derisking Superhot Geothermal Plays with Value of Information: Utilizing Play Fairway Analysis, Geophysics and Technoeconomics

This paper describes a methodology for evaluating how the play fairways analysis (e.g., favorability) can improve our chances of making geothermal development decisions. We make statistical resource assessments and couple them with technoeconomic analysis utilizing previous favorability work performed for the Newberry Volcano. We demonstrate how the favorability can be used in a decision analysis framework because the Newberry favorability also estimated an associated uncertainty. The specific decision considered is how large of a power plant to build, which is difficult given the uncertainty about the resource size. Our results focus on two resource types, hydrothermal and enhanced geothermal systems, and they demonstrate how estimates of the minimum, most likely, and maximum estimates of the geothermal resource (denoted as the P10, P50, and P90, respectively) can be used in a decision analysis framework. Lastly, the value of information results explore using favorability with and without the magnetotelluric and gravity data from the Newberry Volcano. As expected, the favorability is more reliable, according to our methodology, at indicating the resource size when it includes the two geophysical models.

enhanced geothermal system↗

DOE OSTI2024

Search for the Chiral Magnetic Effect with charge-dependent azimuthal correlations in Xe–Xe collisions at s NN = 5.44 TeV

Charge-dependent two- and three-particle correlations measured in Xe–Xe collisions at $\sqrt{s_{NN}}$ = TeV are presented. Results are obtained for charged particles in the pseudorapidity range |η| and transverse momentum interval 02. ≤ p T < GeV/c for different collision centralities. The three-particle correlator γ αβ ≡ $\langle$cos(φ α + φ β - 2Ψ a )$\rangle$, calculated for different combinations of charge sign α and β, is expected to be sensitive to the presence of the Chiral Magnetic Effect (CME). Its magnitude is similar to the one observed in Pb–Pb collisions in contrast to a smaller CME signal in Xe–Xe collisions than in Pb–Pb collisions predicted by Monte Carlo (MC) calculations including a magnetic field induced by the spectator protons. These observations point to a large non-CME contribution to the correlator. Furthermore, the charge dependence of γ αβ can be described by a blast wave model calculation that incorporates background effects and by the Anomalous Viscous Fluid Dynamics model with values of the CME signal consistent with zero. The Xe–Xe and Pb–Pb results are combined with the expected CME signal dependence on the system size from the MC calculations including a magnetic field to obtain the fraction of CME contribution in γ αβ , $f$ CME . The CME fraction is compatible with zero for the 30% most central events in both systems and then becomes positive. This yields an upper limit of 2% (3%) and 25% (32%) at 95% (99.7%) confidence level for the CME signal contribution to γ αβ in the 0–70% Xe–Xe and Pb–Pb collisions, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Methyl α‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside and methyl β‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside: Glycosidic linkage conformation determined from MA'AT analysis

Abstract MA'ATanalysis has been applied to two biologically‐importantO‐glycosidic linkages in two disaccharides, α‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (3) and β‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (4). Using density functional theory (DFT) to obtain parameterized equations relating a group of trans‐O‐glycosidic NMR spin‐couplings to eitherphi(ϕ') orpsi(ψ'), and experimental 3 J COCH , 2 J COC , and 3 J COCC spin‐couplings measured in aqueous solution in 13 C‐labeled isotopomers, probability distributions ofϕ'andψ'in each linkage were determined and compared to those determined by aqueous 1‐μs molecular dynamics (MD) simulation. Good agreement was found between theMA'ATand single‐state MD conformational models of these linkages for the most part, with modest (approximately <15°) differences in the mean values ofϕ'andψ', although the envelope of allowed angles (encoded in circular standard deviations or CSDs) is consistently larger forϕ'determined fromMA'ATanalysis than from MD for both linkages. TheMA'ATmodel of the α‐Galp‐(1→3)‐β‐Galplinkage agrees well with those determined previously using conventional NMR methods ( 3 J COCH values and/or 1 H‐ 1 H NOEs), but some discrepancy was observed for the β‐Galp‐(1→3)‐β‐Galplinkage, which may arise from errors in the conventions used to describe the linkage torsion angles. Statistical analyses of X‐ray crystal structures show ranges ofϕ'andψ'for both linkages that include the mean angles determined fromMA'ATanalyses, although both angles adopt a wide range of values in the crystalline state, withϕ'in β‐Galp‐(1→3)‐β‐Galplinkages showing greater‐than‐expected conformational variability.

Chemistry↗

DOE OSTI2021

Toward predictive permeabilities: Experimental measurements and multiscale simulation of methanol transport in Nafion

A polymer membrane's permeability to solutes determines its suitability for various applications: a permeability value is essential for predicting performance in diverse contexts. Using aqueous methanol permeation through Nafion as an example, we describe a methodology for determining membrane permeability that accounts for boundary layer effects and the possibility of swelling. For the materials and apparatus used herein, analysis of a permeance measurement and computational fluid dynamics simulations show that the mass transfer boundary layer is on the order of ones to tens of microns. Additionally, the data are used to develop and validate a multiscale model describing solute permeation through a hydrated membrane as a series of physical mechanistic steps: reversible adsorption from solution at the membrane interface, diffusion driven by a concentration gradient within the membrane, and reversible desorption into solution at the opposite membrane interface. The validated model is used to predict methanol transport across a solar-driven CO 2 reduction device and to assess the impact of polymer changes on the measured value. The approach of combining experimental data, computational fluid dynamics, and the mechanistic multiscale model is expected to provide more accurate analysis of membrane permeation data in cases with polymer swelling or unusual device geometries, among others.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

High-yield growth kinetics and spatial mapping of single-walled carbon nanotube forests at wafer scale

Emerging commercial applications of vertically aligned, single-walled carbon nanotube (SWCNT) “forests” require synthesis that minimizes nanotube diameter while maximizing number density across substrate areas exceeding centimeter scale. To address this need, we synthesized SWCNT forests on full silicon wafers with notable reproducibility and uniformity, and co-optimized growth for small diameters and high densities across large areas to access new territory in this 3D parameter space. We mapped the spatial uniformity of key structural features using Raman microscopy, synchrotron X-ray scattering, and Rutherford backscattering spectrometry. Low C 2 H 2 flux over sub-nm Fe/Mo catalysts produced small-diameter SWCNTs (2.1 nm) at high number densities (2.26 × 10 12 cm -2 ) on wafers up to 6 in. Although removing Mo resulted in larger SWCNT diameters and lower densities (<0.7 × 10 12 cm -2 ), mass conversion rates from C 2 H 2 to SWCNT product were high and remarkably invariant for catalyst compositions and densities (i.e., 47.7% or 1.30 × 10 6 % g-catalyst -1 on 4-in. wafers). These carbon conversion efficiencies far exceed typical benchtop reactors and are on par with the best reported literature values. Our detailed elucidation of correlations among structural characteristics within this resource-efficient process is expected to guide future scale-up efforts of SWCNT forest growth beyond wafer scale.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Establishing an isoelectronic line ratio temperature diagnostic for soft X-ray absorption spectroscopy

For diagnosing temperatures of high-energy-density plasmas, relying on the ratio of a pair of isoelectronic spectral lines provides the alternative of ‘‘matched charge-state transits in different elements’’ to the more conventional, ‘‘unmatched charge-state transits in the same-element’’ spectral-line-ratio technique. In contrast to a novel previous establishment of isoelectronic emission-line ratio determination of plasma temperature, this report determines plasma temperature from the ratio of isoelectronic absorption spectral line pairs. Here, the feasibility of this technique is assessed from experimentally acquired transmission spectra, spanning the 7– 15 Å range, through a 0.4 μm MgO-NaF foil, tamped with CH, x-ray-radiation heated by a z-pinch dynamic hohlraum (ZPDH), and backlit by the brief X-ray burst upon imploding-wire stagnation on the Z pulsed-power facility at Sandia National Laboratories. As expected from the slight difference between interstage and isoelectronic absorption processes, a quantitative comparison between the value of isoelectronic-absorption-derived temperature and the value of inter-stage-absorption-derived temperature is shown to yield a well correlated, slight difference in inferred values of plasma temperature associated with local thermodynamic equilibrium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Electrification and decarbonization of spent Li-ion batteries purification by using an electrochemical membrane reactor

The expanding electric vehicle market brings with it exponential growth in the use of lithium (Li)-ion batteries (LIB) for which a wave of spent LIB is expected to come within the next 5 to 10 years. Due to the economic and strategic value imbedded within the metals contained in LIB, different recycling technologies, including hydrometallurgy, pyrometallurgy and direct recycling, are under development. Being different from previous hydrometallurgical methods, which may have high chemical consumption and negative environmental impact, an electrochemical membrane reactor is designed and validated for the first time, to electrify and decarbonize the impurity removal process. This reactor electroplates copper (Cu) and electrochemically precipitates aluminum (Al) and iron (Fe) from simulated spent LIB leachates, by consuming only air, water, and electricity, and the impurities are reduced to <1 ppm. The purified leachate maintains 99.5 % of the nickel (Ni), 95.4 % of the cobalt (Co) and 99.14 % of manganese (Mn) from the original leachate solution, and then can be directly applied for cathode precursor synthesis. Additionally, the purification process doesn’t introduce extra impurity, and the reactor restoration process generates valuable by-product hydro sulfate (H2SO4). This electrochemical process can reduce the cost, because of the much less chemical consumption and the valuable by-product generation, and mitigates the waste emissions, because of no extra impurity introduced and no greenhouse gas (GHG) produced. In conclusion, the chemical precipitation method uses significant amount of NaOH, which induced GHG emission during the manufacturing process.

25 ENERGY STORAGE↗

DOE OSTI2021

Characterizing uncertainties in ground “truth” of precipitation over complex terrain through high-resolution numerical modeling

Ground observation of precipitation over complex terrain is subject to large uncertainties due to inadequate sampling. This study explores a method that combines limited gauge data and a high-resolution numerical simulation to quantify the precipitation uncertainties in central Himalaya. Specifically, the Coefficient of spatial Variability (CV) of precipitation and the minimum Number of Required Stations (NRS) to obtain areal-mean precipitation ground truth values within a 0.25-degree area are investigated using fine-scale meteorological simulation at 1.5 km grid spacing. Evaluation over a densely-gauged area demonstrates comparable CV and NRS values between station observations and simulations. The simulated CV and NRS values in a larger area show a strong and positive dependence on each other and an expected positive (negative) correlation with topographic complexity (temporal scale). The proposed method sheds lights on evaluating precipitation products and holds promise for informing the layout of rain gauge networks in complex terrain.

Ouyang, Lin↗

DOE OSTI2021

Collisionless losses of fast ions in the Divertor Tokamak Test due to toroidal field ripple

In this paper we analyze fast ion motion in the Divertor Tokamak Test device. DTT is planned to be heated through a mix of 45 MW heating power, including 15 MW negative-ion-based Neutral Beam heating (NNBI) which is currently being developed by Consorzio RFX in Padova, Italy. An issue for DTT is that a Toroidal Field (TF) ripple with a maximum value of about 0.42% (with respect to the on-axis magnetic field $B_0$) is expected on the low-field side (LFS), and this ripple interacts with fast ions through rather well-known phenomena of ripple-precession resonances, in addition to prompt losses of ions which do not complete a full orbit in the poloidal plane. We will show that, with the planned geometry of NNBI, prompt losses are negligible, and ripple-precession losses amount to a maximum 0.15%. The calculations are performed with the guiding center code ORBIT using two different equilibria, and a beam with energy 400 keV and injection angle $\alpha_{inj} = 40^{\circ}$ (measured w.r.t. the first wall), which corresponds to a pitch of injected particles $\lambda = v_{\parallel}/v \approx \sin{\alpha_{inj}} = 0.65$. Main resonances are of the form $\omega_b - n N \omega_d = 0$, $\omega_b$ and $\omega_d$ being the bounce and precession frequency, respectively, $N=18$ the ripple periodicity and $3 \le n \le 6$ are the toroidal wavenumbers of the resonances. Although collisionless interaction with the TF ripple does not pose a serious threat to the NNBI project, an open question remains whether the presence of these resonances will interact with fast particles accelerated by \alfven eigenmodes, and if stochastization of the resonances is possible in DTT, as it was observed in the past in TORE SUPRA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Heuristic predictions of RMP configurations for ELM suppression in ITER burning plasmas and their impact on divertor performance

Abstract A subspace of resonant magnetic perturbation (RMP) configurations for edge localized mode (ELM) suppression is predicted for H-mode burning plasmas at 15 MA current and 5.3 T magnetic field in ITER. Perturbations to the core plasma can be reduced by a factor of 2 for equivalent edge stability proxies, while the perturbed plasma boundary geometry remains mostly resilient. The striated domain of perturbed field lines connecting from the main plasma (normalized poloidal flux < 1 ) to the divertor targets is found to be significantly larger than the expected heat load width in the absence of RMPs. This facilitates heat load spreading with peak values at an acceptable level below 10 MW m − 2 on the outer target already at moderate gas fueling and low Ne seeding for additional radiative dissipation of the 100 MW of power into the scrape-off layer (SOL). On the inner target, however, re-attachment is predicted away from the equilibrium strike point due to increased upstream heat flux, higher downstream temperature and less efficient impurity radiation.

3D plasma boundary modeling↗

DOE OSTI2020

Tomographic constraints on gravity from angular redshift fluctuations in the late Universe

Fluctuations in sky maps of galaxy redshifts, dubbed angular redshift fluctuations (ARF), contain precise information about the growth rate of structures and the nature of gravity in the Universe. Specifically, ARFs constrain the combination of cosmological parameters H/H 0 fσ 8 (z), while being an intrinsically tomographic probe and largely insensitive to many observational systematic errors, all without requiring the assumption of any redshift-to-distance relation under a given fiducial cosmology. We present the first cosmological constraints derived from ARF by using Baryon Oscillation Spectroscopic Survey (BOSS) LOWZ(Low redshift(Z))+CMASS(Constant MASS) DR12(Data Release 12) galaxy samples, obtaining 7 per cent accurate constraints on H/H 0 fσ 8 (z) at more than 20 redshifts over the range z ϵ [0.26, 0.72]. Our best-fitting value is 10 per cent larger, but compatible at the 1.4σ level, than the ΛCDM expectation set by Planck observations of cosmic microwave background (CMB) radiation. In conclusion, our tomographic measurements, combined with these CMB data, provide one of the strongest constraints on the gravity index γ, $\gamma =0.44^{+0.09}_{-0.07}$, which lies within 2σ of the prediction of General Relativity (γGR ≃ 0.55).

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Measurements of production cross sections of the Higgs boson in the four-lepton final state in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $

Production cross sections of the Higgs boson are measured in the H $\to$ ZZ $\to$ $4\ell$ ($\ell$ $=$ e, $\mu$) decay channel. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV, collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137 fb$^{-1}$ is used. The signal strength modifier $\mu$, defined as the ratio of the Higgs boson production rate in the $4\ell$ channel to the standard model (SM) expectation, is measured to be $\mu$ $=$ 0.94 $\pm$ 0.07 (stat) ${}^{+0.09}_{-0.08}$ (syst) at a fixed value of $m_H$ = 125.38 GeV. The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H $\to$ $4\ell$ process is measured to be 2.84 $^{+0.23}_{-0.22}$ (stat) ${}^{+0.26}_{-0.21}$ (syst) fb, which is compatible with the SM prediction of 2.84 $\pm$ 0.15 fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗