Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Mechanical and morphological properties of kenaf powder filled natural rubber latex foam

This research is carried out by incorporate kenaf powder with natural rubber latex (NRL) compound and is foamed to make natural rubber latex foam (NRLF) by using a well known technique called Dunlop method. Different loading of kenaf powder was added to NRL compound and was foamed to make NRLF. The tensile properties, and morphology of kenaf filled NRLF was studied. Increase in kenaf loading reduced the tensile strength and elongation at break and of a compound. Modulus at 100% elongation of the compound increased with increased in filler loading. The morphological and micro structural characterization has been performed by using scanning electron microscopy (SEM)

36 MATERIALS SCIENCE↗

Mechanical & morphological properties of attapulgite/NR composites: Effect of mixing time variation

The development of composite material based on attapulgite clay (ATP) as a filler and natural rubber (NR) matrices were prepared by combination of melt mixing and latex compounding methods. Sonication technique was chosen in this work to disperse the attapulgite suspension. 6 phr of attapulgite loading was fabricated using different time of mixing ranging from 30 minutes until 2 hours and sonication time was kept constant at 15 minutes. Then, co-coagulating HA latex with attapulgite clay suspension through latex compounding method produced the masterbatch. The masterbatch was compounded with natural rubber by melt mixing method. The mechanical and morphological characteristics were investigated in this work. From mechanical testing, M1 showed the highest value of tensile and tear strength. By comparing with M30 and M2, M1 shows high 300% tensile modulus and lower crosslink density. However, when the time of mixing was prolonged to 2 hours, the results for tensile strength, elongation at break and tear strength were decreased. This is due to flocculation of attapulgite particles. Sonication techniques also proved that the tensile strength and elongation at break of these three samples were higher compared to gum NR (NR) and attapulgite compounded with NR using a conventional method (in-situ 6). From field emission scanning electron microscope (FESEM) results, it revealed that M1 had good dispersion in the NR system. It is proved that the higher tensile strength was due to good dispersion of attapulgite clay in the NR matrix. It was also supported from crosslink density, which is lower than NR and in-situ 6 results. It showed that the penetration of toluene solvent into rubber compound was restricted. The optimum time, M1 give the best results, which can be compared to control the sample.

36 MATERIALS SCIENCE↗

Highly stretchable carbon nanotube transistors enabled by buckled ion gel gate dielectrics

Deformable field-effect transistors (FETs) are expected to facilitate new technologies like stretchable displays, conformal devices, and electronic skins. We previously demonstrated stretchable FETs based on buckled thin films of polyfluorene-wrapped semiconducting single-walled carbon nanotubes as the channel, buckled metal films as electrodes, and unbuckled flexible ion gel films as the dielectric. The FETs were stretchable up to 50% without appreciable degradation in performance before failure of the ion gel film. Here, we show that by buckling the ion gel, the integrity and performance of the nanotube FETs are extended to nearly 90% elongation, limited by the stretchability of the elastomer substrate. The FETs maintain an on/off ratio of >10{sup 4} and a field-effect mobility of 5 cm{sup 2} V{sup −1} s{sup −1} under elongation and demonstrate invariant performance over 1000 stretching cycles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-principles study of crystalline and amorphous AlMgB{sub 14}-based materials

We report first-principles investigations of crystalline and amorphous boron and M1{sub x}M2{sub y}X{sub z}B{sub 14−z} (M1, M2 = Al, Mg, Li, Na, Y; X = Ti, C, Si) phases (so-called “BAM” materials). Phase stability is analyzed in terms of formation energy and dynamical stability. The atomic configurations as well as the electronic and phonon density states of these phases are compared. Amorphous boron consists of distorted icosahedra, icosahedron fragments, and dioctahedra, connected by an amorphous network. The presence of metal atoms in amorphous BAM materials precludes the formation of icosahedra. For all the amorphous structures considered here, the Fermi level is located in the mobility gap independent of the number of valence electrons. The intra-icosahedral vibrations are localized in the range of 800 cm{sup −1}, whereas the inter-icosahedral vibrations appear at higher wavenumbers. The amorphization leads to an enhancement of the vibrations in the range of 1100–1250 cm{sup −1}. The mechanical properties of BAM materials are investigated at equilibrium and under shear and tensile strain. The anisotropy of the ideal shear and tensile strengths is explained in terms of a layered structure of the B{sub 12} units. The strength of amorphous BAM materials is lower than that of the crystalline counterparts because of the partial fragmentation of the boron icosahedra in amorphous structures. The strength enhancement found experimentally for amorphous boron-based films is very likely related to an increase in film density, and the presence of oxygen impurities. For crystalline BAM materials, the icosahedra are preserved during elongation upon tension as well as upon shear in the (010)[100] slip system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE ROTATING OUTFLOW, ENVELOPE, AND DISK OF THE CLASS-0/I PROTOSTAR [BHB2007] no. 11 IN THE PIPE NEBULA

We present the results of observations toward a low-mass Class-0/I protostar [BHB2007] no. 11 (B59 no. 11) in the nearby (d = 130 pc) star-forming region Barnard 59 (B59), in the Pipe Nebula. We utilize the Atacama Submillimeter Telescope Experiment (ASTE) 10 m telescope ({approx}22'' resolution), focusing on the CO(3-2), HCO{sup +}, H{sup 13}CO{sup +}(4-3), and 1.1 mm dust-continuum emission transitions. We also show Submillimeter Array (SMA) data with {approx}5'' resolution in {sup 12}CO, {sup 13}CO, C{sup 18}O(2-1), and 1.3 mm dust-continuum emission. From ASTE CO(3-2) observations, we found that B59 no. 11 is blowing a collimated outflow whose axis lies almost on the plane of the sky. The outflow traces well a cavity-like structure seen in the 1.1 mm dust-continuum emission. The results of SMA {sup 13}CO and C{sup 18}O(2-1) observations have revealed that a compact and elongated structure of dense gas is associated with B59 no. 11; the structure is oriented perpendicular to the outflow axis. There is a compact dust condensation with a size of 350 Multiplication-Sign 180 AU seen in the SMA 1.3 mm continuum map, and the direction of its major axis is almost the same as that of the dense gas elongation. The distributions of {sup 13}CO and C{sup 18}O emission also show velocity gradients along their major axes, which are thought to arise from the envelope/disk rotation. From detailed analysis of the SMA data, we infer that B59 no. 11 is surrounded by a Keplerian disk with a radius of less than 350 AU. In addition, the SMA CO(2-1) image shows a velocity gradient in the outflow in the same direction as that of the dense gas rotation. We suggest that this velocity gradient indicates rotation in the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

The shape of X-ray cavities in galaxy clusters: Probing jet properties and viscosity

X-ray observations of galaxy clusters have detected numerous X-ray cavities, evolved from the interaction of active galactic nucleus (AGN) jets with the intracluster medium (ICM) and providing compelling evidence for the importance of jet-mode AGN feedback. Here we argue for the physical importance of the cavity shape, which we characterize with two geometric parameters: radial elongation τ and top wideness b. We study the cavity shape with 16 hydrodynamic jet simulations in two representative clusters, and find that the shapes of young cavities are mainly determined by various jet properties. Our simulations successfully reproduce two observed types of young cavities elongated along either the jet (τ>1; type-II) or the perpendicular (τ⩽1; type-I) direction. Bottom-wide type-I cavities are produced by very light internally subsonic jets, while top-wide type-II cavities are produced by heavier, internally supersonic jets, which may also produce center-wide cavities with τ∼1 if the jets are only slightly supersonic. Bottom-wide type-II cavities can be produced by very light jets with very long durations and cylindrical cavities are produced by very light internally supersonic jets. While not appreciably affecting the shapes of young cavities, viscosity significantly affects the long-term cavity evolution, suppressing both interface instabilities and the formation of torus-like morphology. We encourage observers to study the shapes of young and old X-ray cavities separately, the former probing the properties of AGN jets and the latter potentially probing the ICM viscosity level.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional multi-probe analysis of the galaxy cluster A1689

We perform a three-dimensional multi-probe analysis of the rich galaxy cluster A1689, one of the most powerful known lenses on the sky, by combining improved weak-lensing data from new wide-field BVR{sub C}i′z′ Subaru/Suprime-Cam observations with strong-lensing, X-ray, and Sunyaev–Zel’dovich effect (SZE) data sets. We reconstruct the projected matter distribution from a joint weak-lensing analysis of two-dimensional shear and azimuthally integrated magnification constraints, the combination of which allows us to break the mass-sheet degeneracy. The resulting mass distribution reveals elongation with an axis ratio of ∼0.7 in projection, aligned well with the distributions of cluster galaxies and intracluster gas. When assuming a spherical halo, our full weak-lensing analysis yields a projected halo concentration of c{sub 200c}{sup 2D}=8.9±1.1 (c{sub vir}{sup 2D}∼11), consistent with and improved from earlier weak-lensing work. We find excellent consistency between independent weak and strong lensing in the region of overlap. In a parametric triaxial framework, we constrain the intrinsic structure and geometry of the matter and gas distributions, by combining weak/strong lensing and X-ray/SZE data with minimal geometric assumptions. We show that the data favor a triaxial geometry with minor–major axis ratio 0.39±0.15 and major axis closely aligned with the line of sight (22°±10°). We obtain a halo mass M{sub 200c}=(1.2±0.2)×10{sup 15} M{sub ⊙} h{sup −1} and a halo concentration c{sub 200c}=8.4±1.3, which overlaps with the ≳1σ tail of the predicted distribution. The shape of the gas is rounder than the underlying matter but quite elongated with minor–major axis ratio 0.60 ± 0.14. The gas mass fraction within 0.9 Mpc is 10{sub −2}{sup +3}%, a typical value for high-mass clusters. The thermal gas pressure contributes to ∼60% of the equilibrium pressure, indicating a significant level of non-thermal pressure support. When compared to Planck's hydrostatic mass estimate, our lensing measurements yield a spherical mass ratio of M{sub Planck}/M{sub GL}=0.70±0.15 and 0.58 ± 0.10 with and without corrections for lensing projection effects, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent JET experiments on Alfven eigenmodes with intermediate toroidal mode numbers: measurements and modelling of n=3 toroidal Alfven eigenmodes with the TAEFL code

This paper reports the results of recent experiments performed on the JET tokamak on Alfven eigenmodes (AEs) with toroidal mode number (n) in the range n = 3-15. The stability properties of these medium-n AEs are investigated experimentally using a new set of compact in-vessel antennas, providing a direct and real-time measurement of the frequency, damping rate and amplitude for each individual toroidal mode number. We report here the quantitative analysis of the measurements of the damping rate for stable n = 3 toroidal AEs as a function of the edge plasma elongation, and the theoretical analysis of these data with the TAEFL code. The TAEFL results are in excellent qualitative agreement with the measurements, reproducing well the experimental scaling of increasing damping rate versus increasing edge elongation, and in many cases are also quantitatively correct, with a difference with respect to the measurements below 30%, particularly for magnetic configurations that have a larger edge magnetic shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE SIZE, SHAPE, AND DENSITY OF DWARF PLANET MAKEMAKE

A recent stellar occultation by the dwarf planet Makemake provided an excellent opportunity to measure the size and shape of one of the largest objects in the Kuiper belt. The analysis of these results provided what were reported to be precise measurements of the lengths of the projected axes, the albedo, and even the density of Makemake, but these results were, in part, derived from qualitative arguments. We reanalyzed the occultation timing data using a quantitative statistical description, and, in general, found the previously reported results on the shape of Makemake to be unjustified. In our solution, in which we use our inference from photometric data that Makemake is being viewed nearly pole-on, we find a 1{sigma} upper limit to the projected elongation of Makemake of 1.02, with measured equatorial diameter of 1434 {+-} 14 km and a projected polar diameter of 1422 {+-} 14 km, yielding an albedo of 0.81{sup +0.01}{sub -0.02}. If we remove the external constraint on the pole position of Makemake, we find instead a 1{sigma} upper limit to the elongation of 1.06, with a measured equatorial diameter of 1434{sup +48}{sub -18} km and a projected polar diameter of 1420{sup +18}{sub -24} km, yielding an albedo of 0.81{sup +0.03}{sub -0.05}. Critically, we find that the reported measurement of the density of Makemake was based on the misapplication of the volatile retention models. A corrected analysis shows that the occultation measurements provide no meaningful constraint on the density of Makemake.

79 ASTRONOMY AND ASTROPHYSICS↗

Inducing changes in the bond length of diatomic molecules by time-symmetric chirped pulses

We show numerically that it is possible to change the structure of a simple molecule, that is, a diatomic molecule, where the bond length is modified at a precise timing with symmetrically chirped laser pulses. In the adiabatic regime, the process is fully time reversible, making it possible to design slow vibrations with large bond elongations. The scheme relies on the preparation of a separable state of both nuclear and electronic degrees of freedom with predominant amplitude on the dissociative (antibonding) electronic wave function. Shorter laser pulses can be used to dynamically induce larger bond elongations, preparing a highly excited vibrational wave packet in the ground potential as the laser is switched off.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shape transformation of Sn nanocrystals induced by swift heavy-ion irradiation and the necessity of a molten ion track

We report on the spherical to rodlike shape transformation of Sn nanocrystals (NCs) embedded in amorphous SiO{sub 2} following irradiation with 185 MeV Au ions. Consistent with previous reports for other metals, transmission electron microscopy demonstrates that under irradiation, Sn NCs larger than a critical size (11 nm) elongate parallel to the incident ion direction, while smaller particles remain spherical. Irradiation-induced NC dissolution is significant, as evident from the formation of smaller NCs in place of their original larger counterparts. Using formation conditions that yield Sn NCs at the amorphous-SiO{sub 2}/crystalline-Si interface, we show that the irradiation-induced shape change occurs only within the SiO{sub 2} layer, in the direction opposite to that of the incident ions. We suggest this demonstrates the necessity of a molten ion track and provides further evidence for an elongation process involving NC melting and flow.

36 MATERIALS SCIENCE↗

The architecture of amyloid-like peptide fibrils revealed by X-ray scattering, diffraction and electron microscopy

The aggregation process and the fibril state of an amyloidogenic peptide suggest monomer addition to be the prevailing mechanism of elongation and a model of the peptide packing in the fibrils has been obtained. Structural analysis of protein fibrillation is inherently challenging. Given the crucial role of fibrils in amyloid diseases, method advancement is urgently needed. A hybrid modelling approach is presented enabling detailed analysis of a highly ordered and hierarchically organized fibril of the GNNQQNY peptide fragment of a yeast prion protein. Data from small-angle X-ray solution scattering, fibre diffraction and electron microscopy are combined with existing high-resolution X-ray crystallographic structures to investigate the fibrillation process and the hierarchical fibril structure of the peptide fragment. The elongation of these fibrils proceeds without the accumulation of any detectable amount of intermediate oligomeric species, as is otherwise reported for, for example, glucagon, insulin and α-synuclein. Ribbons constituted of linearly arranged protofilaments are formed. An additional hierarchical layer is generated via the pairing of ribbons during fibril maturation. Based on the complementary data, a quasi-atomic resolution model of the protofilament peptide arrangement is suggested. The peptide structure appears in a β-sheet arrangement reminiscent of the β-zipper structures evident from high-resolution crystal structures, with specific differences in the relative peptide orientation. The complexity of protein fibrillation and structure emphasizes the need to use multiple complementary methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formability of Al 5xxx Sheet Metals Using Pulsed Current for Various Heat Treatments

Previous studies have shown that the presence of a pulsed electrical current, applied during the deformation process of an aluminum specimen, can significantly improve the formability of the aluminum without heating the metal above its maximum operating temperature range. The research herein extends these findings by examining the effect of electrical pulsing on 5052 and 5083 Aluminum Alloys. Two different parameter sets were used while pulsing three different heat treatments (As Is, 398°C, and 510°C) for each of the two aluminum alloys. For this research, the electrical pulsing is applied to the aluminum while the specimens are deformed, without halting the deformation process (a manufacturing technique known as Electrically-Assisted Manufacturing). The analysis focuses on establishing the effect the electrical pulsing has on the aluminum alloy’s various heat treatments by examining the displacement of the material throughout the testing region of dogbone-shaped specimens. The results from this research show that pulsing significantly increases the maximum achievable elongation of the aluminum (when compared to baseline tests conducted without electrical pulsing). Another beneficial effect produced by electrical pulsing is that the engineering flow stress within the material is considerably reduced. The electrical pulses also cause the aluminum to deform non-uniformly, such that the material exhibits a diffuse neck where the minimum deformation occurs near the ends of the specimen (near the clamps) and the maximum deformation occurs near the center of the specimen (where fracture ultimately occurs). This diffuse necking effect is similar to what can be experienced during superplastic deformation. However, when comparing the presence of a diffuse neck in this research, electrical pulsing does not create as significant of a diffuse neck as superplastic deformation. Electrical pulsing has the potential to be more efficient than traditional methods of incremental forming since the deformation process is never interrupted. Overall, with the greater elongation and lower stress, the aluminum can be deformed quicker, easier, and to a greater extent than is currently possible.

36 MATERIALS SCIENCE↗

An integral approach to considering the evolution of a microwave streamer

We present a model of a microwave streamer based on analytical relations that allows its evolution to be described both during its elongation along the external electric field and after its stop. The equations for the electric field amplitude at the streamer center, the equations that describe the dynamics of the longitudinal and transverse sizes, and the equations of plasma chemical kinetics are self-consistently solved in terms of this model. Comparison with numerical 2D simulations of the electrostatic stage in air is made. We derive simple analytical relations that allow the power released in a plasma channel to be estimated on the fly. Almost the entire energy contribution is shown to be made after the termination of the streamer elongation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geodesic acoustic modes in noncircular cross section tokamaks

The influence of the shape of the plasma cross section on the continuous spectrum of geodesic acoustic modes (GAMs) in a tokamak is analyzed in the framework of the MHD model. An expression for the frequency of a local GAM for a model noncircular cross section plasma equilibrium is derived. Amendments to the oscillation frequency due to the plasma elongation and triangularity and finite tokamak aspect ratio are calculated. It is shown that the main factor affecting the GAM spectrum is the plasma elongation, resulting in a significant decrease in the mode frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of commercial proton exchange membrane materials after exposure to beta and gamma radiation

Proton Exchange Membrane (PEM) type electrolysis cells have a potential use for tritium removal and heavy water upgrading. AECL is currently exposing various commercial PEM materials to both gamma (Cobalt-60 source) and beta (tritiated water) radiation to study the effects of radiation on these materials. This paper summarizes the testing methods and results that have been collected to date. The PEM materials that are or have been exposed to radiation are: Nafion 112, 212, 117 and 1110. Membrane characterization pre- and post- exposure consists of non-destructive inspection (FTIR, SEM/XPS), mechanical (tensile strength, percentage elongation, and modulus), electrical (resistance), or chemical (ion-exchange capacity - IEC). It has appeared that the best characterization techniques to compare exposed versus unexposed membranes were IEC, ultimate tensile strength and percent elongation. These testing techniques are easy and cheap to perform. The non-destructive tests, such as SEM and FTIR did not provide particularly useful information on radiation-induced degradation. Where changes in material properties were measured after radiation exposure, they would be expected to result in poorer cell performance. However, for modest γ-radiation exposure, all membranes showed a slight decrease in cell voltage (better performance). In contrast, the one β-radiation exposed membrane did show the expected increase in cell voltage. The counterintuitive trend for γ-radiation exposed membranes is not yet understood. Based on these preliminary results, it appears that γ- and β-radiation exposures have different effects.

07 ISOTOPE AND RADIATION SOURCES↗

Characterization of Tensile Strength of Glovebox Gloves

A task was undertaken to compare various properties of different glovebox gloves, having various compositions, for use in gloveboxes at the Savannah River Site (SRS). One aspect of this project was to determine the tensile strength (TS) of the gloves. Longitudinal tensile samples were cut from 15 different gloves and tensile tested. The stress, load, and elongation at failure were determined. All of the gloves that are approved for glovebox use and listed in the glovebox procurement specification met the tensile and elongation requirements. The Viton * compound gloves are not listed in the specification, but exhibited lower tensile strengths than permissible based on the Butyl rubber requirements. Piercan Polyurethane gloves were the thinnest samples and exhibited the highest tensile strength of the materials tested.

36 MATERIALS SCIENCE↗