Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dopants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

CO-promoted low-temperature conversion of CH 4 to hydrogen and carbon nanotubes on Nanocrystalline Cr-doped ferrite catalyst

Catalytic decomposition of methane (CDM) to H 2 and multiwalled carbon nanotubes (MWCNTs) was achieved by a nanocrystalline Cr-doped ferrite (FeCr) catalyst at 500 °C and atmospheric pressure with minor cofed CO. The exothermic Boudouard reaction increased the temperature and H 2 from CDM at catalyst surface that induced Fe 2+ reduction to Fe 0 . The Fe 0 clusters along with the CO-originated surface oxygens enabled transfer of C and H to sustain the surface CDM and CO reactions. The metallic Fe-enabled C transfer led to the formation of MWCNTs. The Cr 6+/3+ dopants facilitated the Fe redox cycles and maintained surface oxygens for high catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Acetate formation on metals via CH 4 carboxylation by CO 2 : A DFT study

Here, density functional theory calculations have been performed to investigate CH 4 activation and coupling to CO 2 forming C 2 carboxylates such as acetate on the close-packed (111) or (0001) surfaces of ten mid-to-late transition and coinage metals (Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, and Au). Consistent with the literature, the activation energy (E a ) for the initial C-H bond scission in CH 4 is mild, being ca. 1 eV or less on all but the coinage metals, of which Ag exhibits the highest E a at 2.13 eV, followed by Au and Cu. E a for the CH 3 -CO 2 coupling step is 0.8 ~ 1.1 eV on Co, Ru, Rh, and Ag, 1.2 ~ 1.5 eV on Ni, Cu, Pd, and Ir, and 1.8 ~ 2.1 eV on Pt and Au. While the two E a are comparable for several metals in terms of DFT total energies, free energy analysis indicates CH 3 -CO 2 coupling to be much more rate-limiting than CH 4 activation. Overcoming it would require over 800 K even on the most active of the metals considered, Ru, which makes the formation of acetate not feasible on the monometallic metal surfaces. Instead, we propose that single atom alloys based on early transition metals doped into a host metal such as Ni(111) could be viable catalysts. The dopant sites serve to stabilize the transition state of C-C coupling while Ni sites continue to activate CH 4 , thereby significantly lowering the required temperature for acetate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2023

Solvent-free and low temperature synthesis of chalcogenide Na superionic conductors for solid-state batteries

Sodium chalcogenide ionic conductors are attractive candidates as solid electrolytes (SEs) in solid-state Na metal batteries. They show the advantages of high ionic conductivity of 10 –4 –10 –2 S cm –1 at room temperature and great chemical stability in air. However, simple, efficient, and scalable approaches for the synthesis of chalcogenide solid electrolytes (SEs) are required. In this work, we report a solvent-free mixing to form dry intermediate products, which are subjected to different treatments (electron-beam assisted method or low temperature heating (≤150 °C)) to produce pure phase of Na 3 SbS 4-y Se y (0 ≤ y < 2) chalcogenides. Heavy Se-doping in Na 3 SbS 4 results in the tetragonal-to-cubic phase transition as well as a significant change of Sb-S bonding in Raman spectra. Among all chalcogenide SEs, Na 3 SbS 3 Se showed the highest ionic conductivity of 3.75 × 10 –4 S cm –1 at room temperature, 47% higher than that of pristine Na 3 SbS 4 . Moreover, the Se-dopant also enhanced the electrochemical stability towards Na metal in solid-state batteries. The solid-state Na||FeS 2 battery with Na 3 SbS 3 Se SE displayed long-term cycling ability up to 1,000 cycles within the voltage window of 1.0–2.7 V and retained a specific capacity of 105 mAh g –1 after 600 cycles. As a result, this technique promotes the practical applications of chalcogenide SEs in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Unraveling the relationship between physicochemical properties of NiFeReOx catalysts and the correlated performance toward electrochemical oxygen evolution reaction

NiFeO x catalysts with single site Re dopants exhibit much higher active and stability toward electrochemical oxygen evolution reaction (OER) compared to traditional NiFeO x catalysts. Nevertheless, the relationship between physicochemical properties of NiFeReO x catalysts and the correlated performance toward OER is unclear, which hampers to enhance the OER performance further. Herein, we prepared a series of NiFeReO x catalysts with different physicochemical properties by treating them at different temperatures (up to 350 °C) and then evaluated their performance toward OER. Here, the results show that heat treatment can convert all metal oxidation states to higher values as well as specific surface areas, which are believed to favor real active site generation and OER activity enhancement. A decrease in activity is observed with the temperature increase at the low current range, and the smallest overpotential of 248 mV at 10 mA cm −2 is achieved with the pristine NiFeReO x catalyst. In contrast, the heat-treated samples possess smaller Tafel slopes and lower charge transfer resistance likely due to enhanced intrinsic activity (from higher oxidation states) and conductivity, which facilitate the reaction kinetics and surpass the pristine sample at a large current density. Additionally, the sample treated at 350 °C exhibits a higher activity at 1000 mA cm −2 (1.68 V vs. RHE compared to pristine sample of 1.92 V vs. RHE); however, it manifests a poorer stability compared to the pristine one due to the imbalance of reconstruction/transformations that occurred on the catalyst surface during OER operation. Our work unravels the relationship between physicochemical properties of NiFeReO x catalysts and the correlated OER performance and provides valuable insights for designing NiFeReO x catalysts with high activity and durability.

Catalyst reconstruction↗
DOE OSTI2021

Comparative study of three yttrium organometallic compounds for the stabilization of the cubic phase in YSZ deposited by PE-CVD

In this work, the efficiencies of three organometallic yttrium precursors used to produce YSZ coatings by plasma-enhanced chemical vapor deposition were studied. Yttrium (III) acetylacetonate, Y (acac) 3 , yttrium (III) hexafluoroacetylacetonate, Y (acacF 6 ) 3 , and yttrium (III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate), Y (tmhd) 3 , were used to stabilize the cubic phase in zirconia deposited at temperatures from 500 to 800 °C. Our results showed that at temperatures between 500 and 600 °C, Y (tmhd) 3 appeared to be the most efficient dopant as it introduced the highest concentration of yttria (1–2.7 mol%) with only 6.4–5.6 at.% carbon. However, at 700 and 800 °C, Y (acac) 3 introduced twice as much yttria (8–15 mol%) as Y (tmhd) 3 with almost the same amount of carbon (5.4–3 at.%). Conversely, Y (acacF6)3 was the least efficient as it maintained a low concentration of yttria of around 0.7–1.8 mol% with 3.6–8.2 at.% carbon for all the deposition temperatures. Among these precursors, only Y (acac) 3 surpassed 8 mol% yttria and achieved a fully stabilized cubic phase at 800 °C, with the remaining samples stabilizing only the tetragonal phase. The tetragonal phase was stabilized due to the formation of crystallites of around 10 nm. The observed difference in the efficiency of the three precursors was correlated to important differences in their decomposition behavior as observed by mass spectrometry and thermogravimetry/differential scanning calorimetry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstructural characterization and equibiaxial flexural strength of CeO 2 and Ti-doped CeO 2

In this study, the synthesis of CeO 2 and titanium dioxide (TiO 2 ) doped CeO 2 (TDC) monoliths are investigated, and their fracture strength is assessed using an equibiaxial flexure testing technique at room temperature. Pellets were synthesized using conventional powder processing and sintering methods to produce the desired characteristics. The TiO 2 dopant concentration was optimized at 0.1 wt % TiO 2 to obtain dense, solid-solution pellets with an enhanced grain microstructure. A ball-on-ring fixture was used to obtain the TRS and Weibull parameters of over 30 pellets for CeO 2 and 0.1 wt % TDC to compare fracture behavior. The TRS of CeO 2 pellets ranged from 88 to 160 MPa and the TRS of 0.1 wt % TDC pellets ranged from 102 to 171 MPa, both being consistent with published values. Weibull parameters, such as characteristic strength and Weibull modulus, were extracted as 129 MPa and 8.5 for CeO 2 and 150 MPa and 9.3 for 0.1 wt % TDC, respectively. Although Hertzian contact damage was observed on compressive surfaces, failure initiation occurred on the tensile surfaces of both types of samples. Fracture surface analysis for CeO 2 indicated a predominantly intergranular fracture while 0.1 wt % TDC had a predominantly transgranular fracture mode. Finally, the TRS of 0.1 wt % TDC resulted in increased Weibull parameters when compared to CeO 2 , indicating sample chemistry and microstructure impact mechanical behavior for these samples.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Engineering intricacies of implementing single-atom alloy catalysts for low-temperature electrocatalytic CO 2 reduction

Catalysts research for electrocatalytic CO 2 reduction reactions (CO 2 R) has undergone rapid growth in the last decade. Single-atom alloy catalysts (SAAs) featuring atomically dispersed metal dopants on host metal surfaces have shown promises in boosting CO 2 R yield by optimizing the structure and synergy of the catalytic metals at the atomic scale. Despite the exciting development of SAAs for CO 2 R in fundamental science, dedicated studies for its engineering implementation have been absent. We use this perspective to discuss our non-exhaustive engineering considerations for implementing SAAs for CO 2 R. Here, the perspective starts with a brief overview of the current research status for SAAs in CO 2 R, followed by focal points on structure uncertainties associated with catalyst manufacturing, catalyst layer degradation during reaction, and possibilities for SAAs to mitigate the salt precipitation issue at the device level. We hope our opinions will engage increasing attention toward the engineering catalysis research for applying SAAs to CO 2 R at scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hierarchical Defect Engineering for LiCoO 2 through Low-Solubility Trace Element Doping

Real-world industry-relevant battery composite electrodes are hierarchically structured. Their structural and chemical complexity is featured by ubiquitous multi-scale porosity and cracks, solid-solid and solid-liquid interfaces, compositional and redox heterogeneity, as well as lattice disordering and deformation. In particular for the active cathode particles, which are the fundamental building blocks for the energy reservoir, it is a consensus that these structural and chemical defects could have a profound impact on the battery performance. An in-depth understanding of the underlying mechanisms could critically inform the cathode material engineering, which would have a tremendous potential but remains a daunting challenge at present. In this work, we tackle this question by studying LiCoO 2 (LCO) with trace doping of Ti, which exhibits a low solubility in the LCO layered lattice. Additionally, we observed the spontaneous and heterogeneous segregation of the dopant (Ti) across a wide range of length scales. In addition to the modification of the particle surface and the buried grain boundaries within the particle, we reveal that the Ti doping has induced a significant amount of lattice distortions, which, in turn, promotes the robustness of the LCO lattice at high state of charge (above 4.5V). Our result formulates a multi-scale defect engineering strategy that could be applicable to the synthesis of a broad range of energy materials for applications in batteries and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controlled catalyst-transfer polymerization in graphene nanoribbon synthesis

Exercising direct control over the unusual electronic structures arising from quantum confinement effects in graphene nanoribbons (GNRs) is intimately linked to geometric boundary conditions imposed by the structure of the ribbon. Besides composition and position of substitutional dopant atoms, the symmetry of the unit cell, width, length, and termination of a GNR govern its electronic structure. Here, we present a rational design that integrates each of these interdependent variables within a modular bottom-up synthesis. Our hybrid chemical approach relies on a catalyst-transfer polymerization that establishes excellent control over length, width, and end groups. Complemented by a surface-assisted cyclodehydrogenation step, uniquely enabled by matrix-assisted direct (MAD) transfer protocols, geometry and functional handles encoded in a polymer template are faithfully mapped onto the structure of the corresponding GNR. Bond-resolved scanning tunneling microscopy (BRSTM) and spectroscopy (STS) validate the robust correlation between polymer template design and GNR electronic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Production of graphene-derivatives using organic molecules for supercapacitors and beyond

Graphene is rapidly expanding for applications ranging from nanoelectronics to space exploration. A material with such enormous potential requires a variety of synthesis methods. Here, we report a library of relatively sustainable redox-active organic molecules for the reduction of graphene oxide (GO) namely N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), 7,7,8,8-tetracyanoquinodimethane (TCNQ), ferrocene (Ferro), and decamethylferrocene (DFerro). Among them, the reduction of GO using TMPD starts even with simple hand-shaking for just a few minutes. By controlling the sonication time under ambient conditions, one can control the electronic properties of the reduced graphene oxide (rGO). The resulting free-standing films delivered a capacitance of 185 F/g when tested them as supercapacitor electrodes. We also demonstrated that TMPD can exfoliate graphite into few-layer graphene sheets with simple sonication. Here, we further show that under mild heating, these molecules can serve as dopants during the reduction process to produce nitrogen-doped graphene. Our results may guide researchers to explore sustainable organic molecules for the large-scale production of graphene-based materials for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

SPACE: 3D parallel solvers for Vlasov-Maxwell and Vlasov-Poisson equations for relativistic plasmas with atomic transformations

A parallel, relativistic, three-dimensional particle-in-cell code SPACE has been developed for the simulation of electromagnetic fields, relativistic particle beams, and plasmas. In addition to the standard second-order Particle-in-Cell (PIC) algorithm, SPACE includes efficient novel algorithms to resolve atomic physics processes such as multi-level ionization of plasma atoms, recombination, and electron attachment to dopants in dense neutral gases. SPACE also contains a highly adaptive particle-based method, called Adaptive Particle-in-Cloud (AP-Cloud), for solving the Vlasov-Poisson problems. It eliminates the traditional Cartesian mesh of PIC and replaces it with an adaptive octree data structure. The code's algorithms, structure, capabilities, parallelization strategy, and performance have been discussed. Additionally, typical examples of SPACE applications to accelerator science and engineering problems are described.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

The interaction of acetonitrile with H-terminated and depassivated (100) diamond surfaces

Molecular adsorption on reactive semiconductor surfaces may enable novel surface functionalisation and atomically-precise dopant formation. In this work synchrotron-based x-ray photoelectron spectroscopy and near edge x-ray absorption spectroscopy are used to examine the interaction between acetonitrile and diamond (100) surfaces under ultrahigh vacuum (UHV) conditions. We observe two surface-bound nitrogen species on hydrogen terminated surfaces after thermal depassivation or following synchrotron radiation and subsequent exposure to acetonitrile, but find no evidence of nitrogen adsorption on the hydrogen-terminated diamond surface, at room temperature. Subsequent measurements explore the stability of the surface-bound nitrogen under various temperature conditions and with atmospheric exposure. While the nitrogen coverage achieved in this study is low, this study serves as a proof-of-concept demonstration of a UHV molecular dosing approach to selective nitrogen functionalisation of diamond surfaces as an alternative to plasma-based approaches. This development may be critical for proposed surface-based fabrication workflows using atomic placement of nitrogen-vacancy centres to create quantum devices.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Energy-Dispersive X-ray Spectroscopy and Atom-probe Tomography Data Quantifying Component-Ratios of Multicomponent Nano-Precipitates in Ion-Irradiated Ceria

Samples of ~1 µm films of CeO2 doped with 2 wt% Mo, 1.5 wt% Ru, 0.75 wt% Pd, 0.5 wt% Re and 0.25 wt% Rh grown with pulsed laser deposition were irradiated with I2+ ions (610°C and 730°C, 1016 and 5×1016 I2+/cm2). For selected samples post-irradiation heat treatment was conducted (900°C, 1100°C). The specimens were sectioned with focussed ion beam milling and characterized in a transmission electron microscope with energy dispesive x-ray spectroscopy, and with atom-probe tomography. Energy dispersive x-ray spectroscopy was used to obtain elemental maps showing the distribution of dopants in the specimen after exposure. Some of these maps are discussed in detail in our companion article “Formation of multicomponent alloy particles in doped ceria under I2+ ion irradiation and thermal annealing” in the Journal of Nuclear Materials [REF]. Advanced computational analysis could be used to more accurately quantify local compositions. Data is provided for additional regions of interest and one additional irradiation condition. The doped Ceria film that was heat treated at 1100 °C delaminated from the substrate in most places. Samples were extracted from the underside of a delaminated piece and analyzed with atom-probe tomography. The resulting data show Ceria and a Mo-rich particle and demonstrate that this approach is feasable in principle to study local compositions in a sample exposed to such extreme conditions.

multicomponent alloys, epsilon phase, EDS, atom pr↗
DOE OSTI2021

Evaluation of electrochemical performance and redox activity of Fe in Ti doped layered P2-Na0.67Mn0.5Fe0.5O2 cathode for sodium ion batteries

Here, we report a wet synthesis-based titanium doping strategy to improve the structural stability and electrochemical performances, such as cycling stability and rate capability, of P2-type Na 0.67 Fe 0.5 Mn 0.5 O 2 layered oxide cathodes. Through Ti 4+ doping aimed at replacing some of the Mn and Fe atoms in the crystal structure, effective mitigation of the Jahn Teller distortion caused by active Mn 3+ before charging and Fe 4+ after charging was achieved. X-ray diffraction (XRD), Raman spectroscopy, Electrochemical Impedance Spectroscopy (EIS) and Mössbauer spectroscopy were used to investigate the effects of the Ti 4+ dopant before and after cycling. It was observed that Ti 4+ doping increased the Na layer thickness, minimized the lattice volume strain, showed better structural stability, minimally decreased Fe migration to the Na layer, and lowered charge transfer resistance in these P2-type cathodes. Overall, our reported synthesis methodology and electrochemical characterizations highlight the feasibility of Ti doping in sodium layered oxide P2-type cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: Progress, challenges, and perspectives

High-nickel layered oxides are enabling extraordinary growth of electric vehicles market due to its high energy density. Nonetheless, leading battery manufacturers are trying to cut down the manufacturing costs further by eliminating the dependency on cobalt in cathode materials. In this perspective, we explore several aspects that need to be considered to develop cobalt-free high-Ni layered oxides by reviewing the fundamental properties of LiNiO2. Furthermore, critical key factors for exploring alternative dopants and substituents are discussed for designing stable and inexpensive Co-free high-Ni layered oxides from a viewpoint of materials science and electrochemistry. Lastly, a perspective on the future research direction on Co-free high-Ni layered oxides are highlighted with respect to practical considerations.

25 ENERGY STORAGE↗
DOE OSTI2023

Lithium promotion of Pt/m-ZrO 2 catalysts for low temperature water-gas shift

Low temperature water-gas shift (LTS) is an important reaction occurring in a fuel processor for producing and purifying hydrogen. Platinum supported on m-ZrO 2 belongs to a family of catalysts consisting of metal nanoparticles and an active partially reducible oxide, with the catalysis proposed to occur at the boundary between metal particles and the support. In this investigation, increasing the loading of lithium dopant increased the LTS rate up to 0.54 wt % lithium, where conversion was 2.4 times that of the unpromoted catalyst at 260°C. Further increases in lithium loading up to 1.5 wt % decreased the rate, although it remained higher than that of the unpromoted catalyst. Infrared spectroscopy and CO 2 temperature programmed desorption experiments showed three effects with increasing lithium loading: (1) lithium promoter weakened the C–H bond of formate, the proposed rate limiting step of the interfacial surface formate mechanism; (2) high levels of lithium suppressed the platinum site capacity required for hydrogen transfer; and (3) high levels of lithium increased catalyst basicity. Aspects (2) and (3) tended to inhibit desorption of product CO 2 , an acidic molecule the removal of which is metal-catalyzed. XANES and XPS experiments revealed that electron transfer to enrich Pt nanoparticles is unlikely the root cause of C–H bond weakening in formate. However, other electronic effects (e.g., electrostatic effects or molecular rearrangement due to enhanced basicity) were not ruled out.

08 HYDROGEN↗
DOE OSTI2021

Nickel B-site substitution in bulk Sr 1-x Ca x FeO 3 perovskite oxygen carriers: Benefits and limitations

We report oxygen (O 2 ) storage materials often rely on the presence of cobalt (Co) to reduce the thermodynamic penalty and increase the kinetics necessary for efficient O 2 storage and release. In this work, we investigate nickel (Ni) as an alternative B-site dopant in Sr 1-x Ca x FeO 3 to identify Co-free carriers that still show improved kinetics at low temperatures. In fact, we show a substantial increase in the reversible O2 release rate through mild Ni B-site substitution (y = 0.06) in select Sr 1-x Ca x Fe 1-y Ni y O 3 systems at 400 to 500 °C, reaching 2.00 wt.% O 2 release up to approximately 75% faster than Ni-free systems. To explain the role of Ni in these systems, we use density functional theory to calculate the O 2 vacancy (V O ) formation energy from separate metal-oxygen (M-O) bonding and relaxation components. We computationally show elongated Ni-O bonds are directly responsible for the decrease in V O upon Ni substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗