Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distributed wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Transient Stability Analysis for Offshore Wind Power Plant Integration Planning Studies - Part II: Long Term Faults

Here, this paper addresses the transient stability (also called large-signal stability) analysis of power systems for offshore wind power plant integration planning studies. In particular, this study develops a comprehensive practical methodology to assess transient stability of power systems, including rotor angle stability, voltage stability, and frequency response for large scale power systems. This methodology considers variability of the offshore wind power plants as well as the type of any faulted system' components present and is applicable to the study of both short term and long term faults. Part I of this research discussed the short term faults whereas as Part II, the present paper, discusses long term faults. This research considers the integration of offshore wind power plants into existing power systems and demonstrates the utility of this methodology through the examination of the specific case of integrating 1,000 MW of offshore wind power into the FirstEnergy/PJM service territory using a realistic model of 63k-bus test system that represents the U.S. Eastern Interconnection.

17 WIND ENERGY↗

Transient Stability Analysis for Offshore Wind Power Plant Integration Planning Studies - Part I: Short Term Faults

Power system planning is the process of forecasting load demand and ensuring sufficient generation and reserve capacities over some planning horizon. This process includes investigation of steady-state and dynamic operation of power system of interest. This paper addresses the transient stability (also known as large-signal stability) analysis of power systems for offshore wind power plant integration planning studies. In particular, this study develops a comprehensive practical methodology to assess transient stability of power systems, including rotor angle stability, voltage stability and frequency response for all fault types for large scale power systems. This methodology considers variability of the offshore wind power plants as well as the type of any faulted components present and is applicable to the study of both short term and long term faults, though only short term faults are considered here (long term faults are treated sequentially in a companion paper). Furthermore, this paper considers the integration of offshore wind power plants into existing power systems and demonstrates the utility of this methodology through the examination of the specific case of integrating 1,000MW of offshore wind power into the FirstEnergy/PJM service territory using a realistic model of 63k-bus test system that represents the U.S. Eastern Interconnection.

17 WIND ENERGY↗

The recovery of asteroid 2008 TC[subscript 3]

On October 7, 2008, asteroid 2008 TC{sub 3} impacted Earth and fragmented at 37 km altitude above the Nubian Desert in northern Sudan. The area surrounding the asteroid's approach path was searched, resulting in the first recovery of meteorites from an asteroid observed in space. This was also the first recovery of remains from a fragile 'cometary' PE = IIIa/b type fireball. In subsequent searches, over 600 mostly small 0.2-379 g meteorites (named 'Almahata Sitta') with a total mass 10.7 kg were recovered from a 30 x 7 km area. Meteorites fell along the track at 1.3 kg km{sup -1}, nearly independent of mass between 1 and 400 g, with a total fallen mass of 39 {+-} 6 kg. The strewn field was shifted nearly 1.8 km south from the calculated approach path. The influence of winds on the distribution of the meteorites, and on the motion of the dust train, is investigated. The majority of meteorites are ureilites with densities around 2.8 g cm{sup -3}, some of an anomalous (porous, high in carbon) polymict ureilite variety with densities as low as 1.5 g cm{sup -3}. In addition, an estimated 20-30% (in mass) of recovered meteorites were ordinary, enstatite, and carbonaceous chondrites. Their fresh look and matching distribution of fragments in the strewn field imply that they were part of 2008 TC{sub 3}. For that reason, they are all referred to as 'Almahata Sitta.' No ureilite meteorites were found that still held foreign clasts, suggesting that the asteroid's clasts were only loosely bound.

79 ASTRONOMY AND ASTROPHYSICS↗

H2Integrate [SWR-23-31]

H2Integrate(H2I) is an open-source Python package for hybrid systems engineering design and technoeconomic analysis. It models and optimizes hybrid energy plants that produce electricity, hydrogen, ammonia, steel, and other products. H2Integrate is designed to be flexible and extensible, allowing users to create their own components and models for various energy systems. The tool currently includes distributed energy generation (wind, solar, wave, tidal), battery storage, hydrogen, ammonia, methanol, and steel technologies. Other elements such as desalination systems, pipelines, compressors, and storage systems can also be included as developed by users. Some modeling capabilities in H2Integrate are provided by integrating existing tools, such as HOPP, PySAM, ORBIT, and ProFAST. The H2Integrate tool is built on top of NASA's OpenMDAO framework, which provides a powerful and flexible environment for modeling and optimization.

King, Jennifer [National Renewable Energy Laborato↗

Quantum Stochastic Programming [SWR-26-040]

The Quantum Stochastic Programming tool contains quantum computing algorithms for two-stage stochastic optimization, with a focus on the Unit Commitment (UC) problem in power systems. The algorithms combine Discrete Quantum Annealing (DQA) with Quantum Amplitude Estimation (QAE) to compute expected-value objective functions over a probability distribution of wind-power scenarios. Based on: arXiv 2402.15029 - "Quantum algorithms for the two-stage stochastic unit commitment problem"

Maack, Jonathan [National Laboratory of the Rockie↗

NREL Confirms Large Potential for Grid Integration of Wind, Solar Power (Fact Sheet)

To fully harvest the nation's bountiful wind and solar resources, it is critical to know how much electrical power from these renewable resources could be integrated reliably into the grid. To inform the discussion about the potential of such variable sources, the National Renewable Energy Laboratory (NREL) launched two key regional studies, examining the east and west sections of the U.S. power grid. The studies show that it is technically possible for U.S. power systems to integrate 20%-35% renewable electricity if infrastructure and operational improvements can be made.

14 SOLAR ENERGY↗

Improved Tools for Wind Resource Assessment with Remote Sensing Sodar Device: Cooperative Research and Development Final Report, CRADA Number: CRD-09-363

Under this Agreement, NREL will work with the Participant to characterize wind resource assessment measurement systems needed for the design, construction, and integration of wind energy conversion systems to produce electricity for utility grid applications. This work includes, but is not limited to, research and development of hardware and software systems needed to advance wind energy resource assessment technology at speed and scale for use by electric utilities and wind power system integrators.

17 WIND ENERGY↗

Scanning ARM Cloud Radar—Advanced—Velocity Azimuth Display Value-Added Product

Spatial distribution of horizontal winds is an important meteorological property to understand mesoscale and cloud scale dynamics of cloud and precipitation systems. The most popular wind measurement is performed by soundings. The sounding observation is generally conducted 1-4 times per day, which may not be enough to observe detailed in-cloud structure. Doppler weather and cloud radars can perform frequent measurements of radial velocities of cloud/precipitation particles in clouds. The weather radar community has historically used the Velocity-Azimuth Display (VAD) technique to retrieve in-cloud wind properties (direction and speed) from radial velocity (e.g., Lhermitte and Atlas, 1961). The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Ka- and W-band Scanning ARM Cloud Radars (SACRs) collect volume observations of mean Doppler velocity with horizon-to-horizon range height indicator (HSRHI) scans every 30-60 minutes. The SACR ADVanced Velocity-Azimuth Display (SACR-ADV-VAD) Value-Added Product (VAP) extends the VAD technique to cloud radar observations. The VAP provides time series of vertical profiles of in-cloud wind fields at higher temporal and vertical resolutions, which can augment sounding wind measurements.

47 OTHER INSTRUMENTATION↗

Evaluating the Grid Impact of Oregon Offshore Wind

This analysis used high resolution offshore wind data and a detailed production cost model of the Western Interconnection to explore the value and operational impact of integrating offshore wind along Oregon's coastline. Leveraging local technical stakeholder expertise and input, we determined a set of scenarios to explore. These scenarios varied offshore wind penetrations and explored the differences of integrating offshore wind in the current grid and a potential future grid. This allowed us to determine how changes to the rest of the system and increasing penetrations of offshore wind affected our findings. We identified a number of key findings from the analysis, including that 2.6 GW of nameplate capacity offshore wind could be integrated into the Oregon power system with minimal curtailment due to transmission congestion or other factors. The range of system value provided by offshore wind ranges between $\$$65/MWh and $\$$85/MWh across the various scenarios considered. We also examined the influence offshore wind had on the trans-Cascade power flow, where we determined a strong correlation between offshore wind generation and reduction in flow across the Cascades. Finally, we also determined that offshore wind could serve between 84 - 93% of Coastal Oregon loads depending on the scenario.

17 WIND ENERGY↗

Evaluating the Grid Impact of Oregon Offshore Wind [Slides]

This analysis used high-resolution offshore wind data and a detailed production cost model (PCM) of the Western Interconnection to explore the value and operational impact of integrating offshore wind along Oregon's coastline. Leveraging local technical stakeholder expertise and input, we determined a set of scenarios to explore. These scenarios vary both offshore wind capacities and the Western Interconnection generation and transmission infrastructure. From the scenario modeling and analysis, we identified the following key findings. In addition, we simulated a subset of the scenarios for a range of historical weather years (2007-2013), to understand the robustness of our findings to different weather conditions. Trans-coastal transmission constraints and congestion are the key drivers to the curtailment of Oregon offshore wind. Once power can be delivered into the Willamette Valley, there are few system constraints that lead to a significant curtailment of offshore wind off the coast of Oregon. Approximately 2.6 GW of installed offshore wind capacity can be integrated into Oregon's power system without major upgrades to trans-coastal transmission while avoiding significant curtailment. The system value provided by offshore wind ranges between $\$65$ /MWh and $\$85$ /MWh across the various scenarios considered. Offshore wind heavily influences the flow of the cross Cascade transmission. Across all scenarios, we found a robust relationship of approximately 500-550 MW decrease in the hourly flow of the cross Cascade transmission for every 1,000 MW of hourly offshore wind generation. However, we also found there was not a strong relationship between the highest cross-Cascade transmission flow hours and high offshore wind generation, limiting the extent to which offshore wind can be considered a non-wires alternative to cross cascade transmission. Depending on the meteorological year, 880-1,580 MW and 1,650-3,100 MW can be counted on to serve coastal loads with 2.6 GW and 5 GW of offshore wind capacity, respectively. Offshore wind allows for more optimal daily and hourly scheduling of hydropower, while still complying with various technical and regulatory constraints on the water resource. Oregon offshore wind has the potential to contribute to the evening net load peak in California (i.e., mitigate duck curve challenges), however transmission congestion between California and Oregon limits this contribution. Co-located storage at the point of interconnection for offshore wind reduces curtailment when trans-coastal transmission is not upgraded, providing a non-wires alternative to increase offshore wind capacity beyond 2.6 GW.

17 WIND ENERGY↗

REopt Lite Tutorial: International Locations

NREL’s REopt Lite web tool helps users evaluate the economic viability of distributed photovoltaic (PV), wind, battery storage, combined heat and power, and thermal energy storage systems. REopt Lite was designed for locations within the United States; however, with appropriate adjustments, it is possible to use most of its features for international locations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FLOWERS AEP: An Analytical Model for Wind Farm Layout Optimization

Annual energy production (AEP) is commonly used in objective functions for wind farm layout optimization. AEP is proportional to wind farm power production integrated over an annual distribution of free-stream wind conditions. Physics-based estimates of wind farm power production typically rely on low-fidelity engineering wake models that approximate the steady-state wind farm flow field. AEP estimates are then obtained by performing independent simulations for discrete wind conditions and using rectangular quadrature to account for each condition's expected frequency of occurrence. Depending on the number of simulated discrete wind conditions, this numerical integral could be hampered by poor accuracy or high computational costs. The FLOWERS AEP model instead poses an analytical integral of the engineering wake model over the variable wind conditions, yielding a closed-form, analytical function for wind farm AEP. This paper derives the analytical functions for FLOWERS AEP and its derivatives with respect to turbine position, which are useful for gradient-based wind farm layout optimization, in nondimensional form. We then analyze the benefits of the FLOWERS AEP model over conventional reference models, focusing on its low cost, adequate wake loss predictions, and smooth design space. Although the FLOWERS approach is found to predict the exact value of AEP with some error relative to the reference model (within 14% on average), it dramatically reduces computation time by an order of magnitude, produces a qualitatively similar design space at relatively low resolution, and yields comparable optimal layouts. This significant speed improvement is critical in layout optimization applications, where determining an optimal layout in an efficient manner is more important than precise AEP prediction.

17 WIND ENERGY↗

Device Access Abstractions for Resilient Information Architecture Platform for Smart Grid

An open application platform distributes the intelligence and control capability to local endpoints (or nodes) reducing total network traffic, improving speed of local actions by avoiding latency, and improving reliability by reducing dependencies on numerous devices and communication interfaces. The platform must be multi-tasking and able to host multiple applications running simultaneously. Given such a system, the core functions of power grid control systems include grid state determination, low level control, fault intelligence and reconfiguration, outage intelligence, power quality measurement, remote asset monitoring, configuration management, power and energy management (including local distributed energy resources, such as wind, solar and energy storage) can be eventually distributed. However, making this move requires extensive regression testing of systems to prove out new technologies, such as phasor measurement units (PMU). Additionally, as the complexity of the systems increase with the inclusion of new functionality (especially at the distribution and consumer levels), hidden coupling issues becomes a challenge with possible N-way interactions known and not known by device and application developers. Therefore, it is very important to provide core abstractions that ensure uniform operational semantics across such interactions. Here in this paper, we describe the pattern for abstracting device interactions we have developed for the RIAPS platform in the context of a microgrid control application we have developed.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Evaluation of the wind farm parameterization in the Weather Research and Forecasting model (version 3.8.1) with meteorological and turbine power data

Forecasts of wind-power production are necessary to facilitate the integration of wind energy into power grids, and these forecasts should incorporate the impact of wind-turbine wakes. Our paper focuses on a case study of four diurnal cycles with significant power production, and assesses the skill of the wind farm parameterization (WFP) distributed with the Weather Research and Forecasting (WRF) model version 3.8.1, as well as its sensitivity to model configuration. After validating the simulated ambient flow with observations, we quantify the value of the WFP as it accounts for wake impacts on power production of downwind turbines. We also illustrate with statistical significance that a vertical grid with approximately 12 m vertical resolution is necessary for reproducing the observed power production. Further, the WFP overestimates wake effects and hence underestimates downwind power production during high wind speed, highly stable, and low turbulence conditions. We also find the WFP performance is independent of the number of wind turbines per model grid cell and the upwind–downwind position of turbines. Rather, the ability of the WFP to predict power production is most dependent on the skill of the WRF model in simulating the ambient wind speed.

17 WIND ENERGY↗

Short-Term Forecasting Across a Network for the Autonomous Wind Farm: Preprint

In an autonomous wind farm, turbines will use information from nearby turbines to achieve wind farm-level objectives such as optimizing the overall performance of a wind farm, ensuring resiliency when other sensors fail, and adapting to changing local conditions. In this paper, the wind farm can be modeled as a network within which turbines (nodes) share information across designated communication channels, with a focus on turbines at the outside of the wind farm capturing local effects and sharing that information with downstream turbines. Understanding of varied inflow conditions can be especially important in complex terrain. This information can be used to monitor turbines, self-organize turbines into groups, and predict the power performance of a wind farm. In particular, this paper describes an autonomous wind farm that incorporates information from local sensors in real time to predict wind speed and wind direction at each turbine over a short-term horizon. Results indicate that the estimate of wind direction can be used to improve the knowledge of the wind speed and direction over the persistence method on a 10- 15-minute time horizon. These short-term forecasts can also be used to facilitate advanced control methods such as feedforward control within a wind farm.

17 WIND ENERGY↗

Short-Term Forecasting Across a Network for the Autonomous Wind Farm

In an autonomous wind farm, turbines will use information from nearby turbines to achieve wind farm-level objectives such as optimizing the overall performance of a wind farm, ensuring resiliency when other sensors fail, and adapting to changing local conditions. In this paper, the wind farm can be modeled as a network within which turbines (nodes) share information across designated communication channels, with a focus on turbines at the outside of the wind farm capturing local effects and sharing that information with downstream turbines. Understanding of varied inflow conditions can be especially important in complex terrain. This information can be used to monitor turbines, self-organize turbines into groups, and predict the power performance of a wind farm. In particular, this paper describes an autonomous wind farm that incorporates information from local sensors in real time to predict wind speed and wind direction at each turbine over a short-term horizon. Results indicate that the estimate of wind direction can be used to improve the knowledge of the wind speed and direction over the persistence method on a 10-15-minute time horizon. These short-term forecasts can also be used to facilitate advanced control methods such as feedforward control within a wind farm.

17 WIND ENERGY↗

Wind Plant Collector System Fault Protection and Coordination

This paper presents a summary of the most important protection and coordination considerations for wind power plants. Short-circuit characteristics of both aggregate wind plant and individual wind turbine genera- tors, as well as general interconnection protection requirements are discussed. Many factors such as security, reliability, and safety are considered for proper conservative protection of the wind power plant and individual turbines.

17 WIND ENERGY↗

Multidimensional Distributional Neural Network Output Demonstrated in Super‐Resolution of Surface Wind Speed

Accurate quantification of uncertainty in neural network predictions remains a central challenge for scientific applications involving high-dimensional, correlated data. While existing methods capture either aleatoric or epistemic uncertainty, few offer closed-form, multidimensional distributions that preserve spatial correlation while remaining computationally tractable. In this work, we present a framework for training neural networks with a multidimensional Gaussian loss, generating a closed-form predictive distribution over outputs informed by non-identically distributed training data. Our approach captures aleatoric uncertainty by iteratively estimating the means and covariance matrices, and is demonstrated on a super-resolution example out-of-training-sample. We leverage a Fourier representation of the covariance matrix to stabilize network training and preserve spatial correlation. We introduce a novel regularization strategy—referred to as information sharing—that interpolates between image-specific and global covariance estimates, enabling convergence of the super-resolution downscaling network trained on image-specific distributional loss functions. This framework allows for efficient sampling, explicit correlation modeling, and extensions to more complex distribution families all without disrupting prediction performance. We demonstrate the method on a surface wind speed downscaling task and discuss its broader applicability to uncertainty-aware prediction in scientific models.

17 WIND ENERGY↗