Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Gas flow and fluidization in a thick dynamic regolith: A new mechanism for the formation of chondritic meteorites

We have previously shown that size and density sorting in a regolith which has been 'fluidized' by the passage or gases from the interior or the body can quantitatively explain metal-silicate fractionation, an important property of ordinary chondrites. Here we discuss whether the flow rates and flux or volatiles expected from a primitive parent body are likely to be sufficient for this mechanism. Many meteorite parent bodies may have contained volatiles. From a consideration of heat diffusion and fluid mechanics, we calculate the gas flow rate of volatiles (e.g., water) in the regolith of an asteroid-sized object heated by Al-26. Our calculations show that the flow velocities and flux of water vapor are sufficient to produce conditions suitable for fluidization. Other heat sources have yet to be considered, but literature work suggests that they may be equally effective.

Huang, Shaoxiong↗
NASA NTRS2004

Experimental Investigation of Diffuser Hub Injection to Improve Centrifugal Compressor Stability

Results from a series of experiments to investigate whether centrifugal compressor stability could be improved by injecting air through the diffuser hub surface are reported. The research was conducted in a 4:1 pressure ratio centrifugal compressor configured with a vane-island diffuser. Injector nozzles were located just upstream of the leading edge of the diffuser vanes. Nozzle orientations were set to produce injected streams angled at 8, 0 and +8 degrees relative to the vane mean camber line. Several injection flow rates were tested using both an external air supply and recirculation from the diffuser exit. Compressor flow range did not improve at any injection flow rate that was tested. Compressor flow range did improve slightly at zero injection due to the flow resistance created by injector openings on the hub surface. Leading edge loading and semi-vaneless space diffusion showed trends similar to those reported earlier from shroud surface experiments that did improve compressor flow range. Opposite trends are seen for hub injection cases where compressor flow range decreased. The hub injection data further explain the range improvement provided by shroud-side injection and suggest that different hub-side techniques may produce range improvement in centrifugal compressors.

Skoch, Gary J.↗
NASA NTRS2000

An Overview of Combustion Mechanisms and Flame Structures for Advanced Solid Propellants

Ammonium perchlorate (AP) and cyclotretamethylenetetranitramine (HMX) are two solid ingredients often used in modern solid propellants. Although these two ingredients have very similar burning rates as monopropellants, they lead to significantly different characteristics when combined with binders to form propellants. Part of the purpose of this paper is to relate the observed combustion characteristics to the postulated flame structures and mechanisms for AP and HMX propellants that apparently lead to these similarities and differences. For AP composite, the primary diffusion flame is more energetic than the monopropellant flame, leading to an increase in burning rate over the monopropellant rate. In contrast the HMX primary diffusion flame is less energetic than the HMX monopropellant flame and ultimately leads to a propellant rate significantly less than the monopropellant rate in composite propellants. During the past decade the search for more energetic propellants and more environmentally acceptable propellants is leading to the development of propellants based on ingredients other than AP and HMX. The objective of this paper is to utilize the more familiar combustion characteristics of AP and HMX containing propellants to project the combustion characteristics of propellants made up of more advanced ingredients. The principal conclusion reached is that most advanced ingredients appear to burn by combustion mechanisms similar to HMX containing propellants rather than AP propellants.

Beckstead, M. W.↗
NASA NTRS1983

Experimental limits of the extreme ultraviolet background

Photometric observations of the diffuse extreme ultraviolet background with two photometers having bandpasses of 750-940 A and 1040-1080 A are reported. The payload, which was flown aboard an ARIES sounding rocket in June 1982, is described, including the electron detectors, filters, and calibration. The operation of the probe during the experiment, including its motions, are described. The primary experiment involved spectroscopic observation of the hot white dwarf HZ43. The photometer count rate is shown and the measurements of the diffuse background are compared with theoretical predictions. Despite the lower limits obtained using a narrowband detector, the measurements are not sensitive enough to draw any relevant astrophysical conclusions.

Wulf-Mathies, C.↗
NASA NTRS1985

Destabilization of yttria-stabilized zirconia induced by molten sodium vanadate-sodium sulfate melts

The extent of surface destabilization of ZrO2 - 8 wt percent Y2O3 ceramic disks was determined after exposure to molten salt mixtures of sodium sulfate containing up to 15 mole percent sodium metavanadate (NaVO3) at 1173 K. The ceramic surface was observed to transform from the cubic/tetragonal to monoclinic phase, concurrent with chemical changes in the molten salt layer in contact with the ceramic. Significant attack rates were observed in both pure sulfate and metavanadate sulfate melts. The rate of attack was found to be quite sensitive to the mole fraction of vanadate in the molten salt solution and the partial pressure of sulfur trioxide in equilibrium with the salt melt. The observed parabolic rate of attack is interpreted to be caused by a reaction controlled by diffusion in the salt that penetrates into the porous layer formed by the destabilization. The parabolic rate constant in mixed sodium metavanadate - sodium sulfate melts was found to be proportional to the SO3 partial pressure and the square of the metavanadate concentration. In-situ Raman spectroscopic measurements allowed simultaneous observations of the ceramic phases and salt chemistry during the attack process.

Nagelberg, A. S.↗
NASA NTRS1995

One-dimensional hybrid satellite track model for the Dynamics Explorer 2 (DE 2) satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. (1985) satellite track code but also includes elements of Roble et al. (1987b) global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the Mass Spectrometer Incoherent Scatter 1990 (MSIS-90) model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule heating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗
NASA NTRS1995

One-Dimensional Hybrid Satellite Track Model for the Dynamics Explorer 2 (DE 2) Satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. satellite track code but also includes elements of Roble et al. global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the MSIS-90 model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule beating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗
NASA NTRS1946

Performance of the Modified V-1710-93 Engine-Stage Supercharger with a Constant-Area Vaneless Diffuser

As part of an investigation to increase the power output of the V-1710-93 engine at altitude, the engine-stage supercharger was combined with a constant-area vaneless diffuser designed to improve the performance of the engine-stage supercharger at the rated engine operating point. The performance of the modified supercharger was investigated in a variable-component supercharger test rig and compared with that of the standard supercharger with an 8-vaned diffuser. A separate evaluation of the component efficiencies and a study of the flow characteristics of the modified supercharger was made possible by internal diffuser instrumentation. At the volume flow required by the engine for rated operating conditions, the modified supercharger increased the over-all adiabatic efficiency 0.05 and the over-all pressure coefficient 0.035. Furthermore, the capacity of the engine-stage supercharger was increased by replacing the standard 8-vaned diffuser with the vaneless diffuser. The peak over-all adiabatic efficiency for the modified supercharger, however, was 0.05 to 0.07 lower than that of the standard unit over the range of tip speeds investigated. The improved performance of the modified supercharger at rated engine operating conditions resulted from a shift of the point of peak adiabatic efficiency and pressure coefficient of the standard supercharger to a higher flow. The energy loss through the vaneless diffuser was found to be small. Because of the restricted diffuser diameter, however, diffusion was inadequate, which resulted in a relatively small static-pressure rise through the diffuser, high diffuser-exit velocities, and excessive collector-case losses.

Douglas, John E.↗
NASA NTRS1988

Diffusional transport during the cyclic oxidation of gamma + beta, Ni-Cr-Al(Y, Zr) alloys

The cyclic oxidation behavior of several cast gamma + beta, Ni-Cr-Al(Y, Zr) alloys and one low-pressure plasma spraying gamma + beta, Ni-Co-Cr-Al(Y) alloy was studied. Cyclic oxidation was found to result in a decreasing Al concentration at the oxide-metal interface due to a high rate of Al consumption coupled with oxide scale cracking and spalling. Diffusion paths plotted on the ternary phase diagram showed higher Ni concentrations with increasing cyclic oxidation exposures. The alloy with the highest rate of Al consumption and the highest Al content underwent breakaway oxidation following 500 1-hr cycles at 1200 C.

Nesbitt, J. A.↗
NASA NTRS1977

Prediction of laminar and turbulent boundary layer flow separation in V/STOL engine inlets

The paper provides a theoretical description of the development of the boundary layer on the lip and diffuser surface of a subsonic inlet at arbitrary operating conditions of mass flow rate, freestream velocity and incidence angle. Both laminar separation on the lip and turbulent separation in the diffuser are discussed. The agreement of the theoretical results with model experimental data illustrates the capability of the theory to predict separation. The effects of throat Mach number, inlet size, and surface roughness on boundary-layer development and separation are illustrated.

Chou, D. C.↗
NASA NTRS2022

Biofilm Study Under Simulated Microgravity

The goal of this study was to understand biofilm formation under microgravity (µg), in support of biofilm mitigation efforts in exploration water recovery systems. The technical approach was to conduct a mass transfer and bacterial culture study under both simulated µg and ambient gravity. The aim was to correlate nutrient consumption to gene expression to better understand biofilm formation. A representative species of bacteria that is commonly cultured from the International Space Station (ISS) Water Processor Assembly (WPA) was cultured in a WPA influent water ersatz formulation that is tailored for microbiology studies. A mass transfer rate study was carried out using the ersatz WPA influent water by introducing a water-soluble dye to represent dissolved nutrients and nutrient particles. Imaging of dye diffusion over time allowed for the comparison of mass transport rates under a series of rotation per minute (RPM) speeds for the High Aspect Ratio Vessels (HARVs) on a Rotating Wall Vessel (RWV). This was done to determine the speed that will most accurately simulate the low convective rates experienced under actual µg conditions. Three biological replicates of the Burkholderia contaminans (B. contaminans) microbe were cultured under simulated µg with a rotating (R) control in the horizontal plane at the determined optimal RPM of 15, along with a stationary (S) reference culture. At T=0, and then at T=1,2,3 (in exponential phase) and T=4 (in S phase), the bacterial culture and ersatz were harvested for transcriptomic and nutrient content analysis, respectively. The experimental results illustrated that phosphate is a limiting nutrient in the WPA ersatz formula. Nutrient analysis illustrated that the µg treatment culture took up essential nutrients more rapidly than the R and S control cultures, yet non-essential nutrients remained higher in the µg treatment than in the controls at later timepoints. The rapid uptake and subsequent starvation of phosphate in the culture under µg conditions is further illustrated in the transcriptomic response when compared to that of the R control condition. The subsequent starvation response may serve as one element to explain a moderate enhancement of biofilm formation in the µg treatment. One implication of this work is that biofilm mitigation in the ISS environment could be supported by ensuring a steady flow of water as a vehicle for phosphate within the WPA to avoid complete phosphate consumption, which occurs in times of no flow and leads to undesired biofilm formation.

Aubrie O’Rourke↗
NASA NTRS2017

Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO

Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches.

turbomachinery↗
NASA NTRS1995

Convergence properties of finite-difference hydrodynamics schemes in the presence of shocks

We investigate the asymptotic convergence of finite-difference schemes for the Euler equations when the limiting solution contains shocks. The Lax-Wendroff theorem guarantees that certain conservative schemes converge to correct, physically valid solutions. We focus on two one-dimensional operator-split schemes with explicit artificial-viscosity terms. One, an internal-energy scheme, does not satisfy the assumptions of Lax-Wendroff; the other, a conservative total-energy scheme, does. With viscous lengths chosen proportional to the grid size, we find that both schemes converge to their zero-grid-size limits at the theoretically expected rate, but only the conversative scheme converges toward correct solutions of the inviscid fluid equations. We show that the difference in their behaviors results directly from the presence of shocks in the limiting solution. Empirically, we find that when the viscous lenghts tend toward zero more slowly than the grid size, however the nonconservative scheme also converges toward correct solutions. We characterize the asymptotic behavior of the total-energy scheme in a particular problem in which a shock forms. As the grid is refined, a Cauchy error approaches the expected rate of change slowly. We show that the changes in the artificial viscosity alter the diffusion of small-amplitude waves. The differences associated with such waves make the dominant contribution to the Cauchy error. We formulate an analytic model to relate the rate of approach to the effect of varying diffusion in waves and find quantitative agreement with our numerical results.

Kimoto, Paul A.↗
NASA NTRS1977

Photochemistry of the Martian atmosphere

A critical analysis is carried out for models which may be fine tuned to give agreement with observational constraints for O2, CO, and O3 in the Martian lower atmosphere and which are in accord also with upper atmospheric data for O and CO. The models have a number of features in common: dynamic mixing must be exceedingly rapid at heights above 90 km; if heterogeneous processes are not assumed to play a major role in the removal of atmospheric CO and O2, mixing must be rapid at heights between 30 and 40 km. The value implied for the diffusion coefficient in this region depends on the assumptions made regarding the rates for reaction of OH with HO2 to form H2O and the rate of reaction of HO2 with itself to form H2O2. If these reaction rates are taken to have values similar to those used in current models of the earth's stratosphere, the eddy diffusion coefficient at 40 km above the Martian surface should be about 5 by 10 to the seventh power sq cm/sec.

Kong, T. Y.↗
NASA NTRS1977

Prediction of Laminar and Turbulent Boundary Layer Flow Separation in V/STOL Engine Inlets

A description is presented of the development of the boundary layer on the lip and diffuser surface of a subsonic inlet at arbitrary operating conditions of mass flow rate, free stream velocity and incidence angle. Both laminar separation on the lip and turbulent separation in the diffuser are discussed. The agreement of the theoretical results with model experimental data illustrates the capability of the theory to predict separation. The effects of throat Mach number, inlet size, and surface roughness on boundary layer development and separation are illustrated.

Chou, D. C.↗
NASA NTRS1989

Proposed uses of laser light scattering instruments for polymerization studies

Microgravity offers a unique environment for studying polymer diffusion and polymer polymerization reactions. The absence of convection currents, which are the major mode of mixing at the molecular level on Earth, are eliminated or reduced in the microgravity environment. More importantly, the prediction of unique copolymer composition development in microgravity allows controlled formation of new compositions of matter. The absence of mixing at the molecular level should produce unique short block copolymers available for the first time for comonomer compositions which normally lead to random or long block copolymer under good mixing. The investigation of fundamental polymer diffusion and polymer polymerization processes in microgravity is proposed. This effort will involve fundamental studies of monomer and polymer diffusion; their effects on initiation, propagation, and especially termination kinetics rate constant; and the accurate evaluation of copolymerization reactivity ratios in microgravity. The experimental design is presented for these studies along with an evaluation technique for in situ monitoring of polymer diffusion and polymerization kinetics.

Mathias, Lon J.↗
NASA NTRS1994

DIBS independent of accretion in T Tauri stars

The examination of high resolution spectra (5200 - 7000 Angstroms) of 36 T Tauri stars ranging in accretion rates was performed. Only the lambda lambda 5780, 5797, and 6613 bands were found detectable to within an equivalent width of 10 micro Angstroms. They are strongest in DG Tau, DR Tau, Dl Tau, and AS 353A. DR Tau was monitored over the course of four years; during this time, the accretion rate varied by a factor of five, but the equivalent widths of the DIB's (Diffuse Interstellar Bands) remained constant. The lack of correlation of the strength of the bands with the accretion rates implies that the bands are not directly produced by UV radiation from the accretion process. The bands have line strengths and ratios characteristic of the diffuse interstellar medium, from which we conclude that the diffuse interstellar bands seen in the spectra of T Tauri stars do not originate in the stars' immediate environment. Instead, they are part of a foreground extinction, probably due to the parent molecular cloud.

Ghandour, Louma↗
NASA NTRS1991

Heat Transfer to a Thin Solid Combustible in Flame Spreading at Microgravity

The heat transfer rate to a thin solid combustible from an attached diffusion flame, spreading across the surface of the combustible in a quiescent, microgravity environment, was determined from measurements made in the drop tower facility at NASA-Lewis Research Center. With first-order Arrhenius pyrolysis kinetics, the solid-phase mass and energy equations along with the measured spread rate and surface temperature profiles were used to calculate the net heat flux to the surface. Results of the measurements are compared to the numerical solution of the complete set of coupled differential equations that describes the temperature, species, and velocity fields in the gas and solid phases. The theory and experiment agree on the major qualitative features of the heat transfer. Some fundamental differences are attributed to the neglect of radiation in the theoretical model.

Bhattacharjee, S.↗