Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Issues in ATM Support of High-Performance, Geographically Distributed Computing

This report experimentally assesses the effect of the underlying network in a cluster-based computing environment. The assessment is quantified by application-level benchmarking, process-level communication, and network file input/output. Two testbeds were considered, one small cluster of Sun workstations and another large cluster composed of 32 high-end IBM RS/6000 platforms. The clusters had Ethernet, fiber distributed data interface (FDDI), Fibre Channel, and asynchronous transfer mode (ATM) network interface cards installed, providing the same processors and operating system for the entire suite of experiments. The primary goal of this report is to assess the suitability of an ATM-based, local-area network to support interprocess communication and remote file input/output systems for distributed computing.

Claus, Russell W.↗
DOE OSTI2025

C 12 ( n , n 1 ′ γ ) partial γ -ray cross section measured using the GENESIS array

Improved neutron inelastic scattering cross sections have repeatedly been identified as a top priority nuclear data need, important for basic science and a range of applications in nuclear energy, stockpile stewardship, and proliferation detection. For the C 12 ( n , n ′ γ ) reaction in particular, recent measurements have unveiled some structural discrepancies, demonstrating incongruities among themselves and in relation to the ENDF/B-VIII.0 nuclear data evaluation. To help resolve these disagreements, a measurement was performed at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory using a broad-spectrum neutron beam and a 99.8% pure natural carbon target. The Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering (GENESIS) was employed to measure energy-differential γ -ray emission spectra as a function of incident neutron energy in the energy range of 5.5 to 16.7 MeV. The C 12 partial γ -ray cross sections were extracted at 63 ∘ , 122 . 5 ∘ , and 150 ∘ with respect to the incoming neutron beam and integrated using angular distribution data available in the literature. The data show agreement with a recent literature measurement and evaluation from 11 to 15 MeV, but indicate a larger cross section for incident neutron energies between 5.5 and 8.5 MeV. The measured relative angular distributions are also reported and were found to agree with evaluation. Published by the American Physical Society 2025

Gordon, J. M. (ORCID:0009000789886897)↗
NASA NTRS1990

Modeling of the Space Station Freedom data management system

The Data Management System (DMS) is the information and communications system onboard Space Station Freedom (SSF). Extensive modeling of the DMS is being conducted throughout NASA to aid in the design and development of this vital system. Activities discussed at NASA Ames Research Center to model the DMS network infrastructure are discussed with focus on the modeling of the Fiber Distributed Data Interface (FDDI) token-ring protocol and experimental testbedding of networking aspects of the DMS.

Johnson, Marjory J.↗
NASA NTRS1995

Neural Network Burst Pressure Prediction in Graphite/Epoxy Pressure Vessels from Acoustic Emission Amplitude Data

Acoustic emission (AE) data were taken during hydroproof for three sets of ASTM standard 5.75 inch diameter filament wound graphite/epoxy bottles. All three sets of bottles had the same design and were wound from the same graphite fiber; the only difference was in the epoxies used. Two of the epoxies had similar mechanical properties, and because the acoustic properties of materials are a function of their stiffnesses, it was thought that the AE data from the two sets might also be similar; however, this was not the case. Therefore, the three resin types were categorized using dummy variables, which allowed the prediction of burst pressures all three sets of bottles using a single neural network. Three bottles from each set were used to train the network. The resin category, the AE amplitude distribution data taken up to 25 % of the expected burst pressure, and the actual burst pressures were used as inputs. Architecturally, the network consisted of a forty-three neuron input layer (a single categorical variable defining the resin type plus forty-two continuous variables for the AE amplitude frequencies), a fifteen neuron hidden layer for mapping, and a single output neuron for burst pressure prediction. The network trained on all three bottle sets was able to predict burst pressures in the remaining bottles with a worst case error of + 6.59%, slightly greater than the desired goal of + 5%. This larger than desired error was due to poor resolution in the amplitude data for the third bottle set. When the third set of bottles was eliminated from consideration, only four hidden layer neurons were necessary to generate a worst case prediction error of - 3.43%, well within the desired goal.

Hill, Eric v. K.↗
NASA NTRS1990

Advanced telemetry systems for payloads. Technology needs, objectives and issues

The current trends in advanced payload telemetry are the new developments in advanced modulation/coding, the applications of intelligent techniques, data distribution processing, and advanced signal processing methodologies. Concerted efforts will be required to design ultra-reliable man-rated software to cope with these applications. The intelligence embedded and distributed throughout various segments of the telemetry system will need to be overridden by an operator in case of life-threatening situations, making it a real-time integration issue. Suitable MIL standards on physical interfaces and protocols will be adopted to suit the payload telemetry system. New technologies and techniques will be developed for fast retrieval of mass data. Currently, these technology issues are being addressed to provide more efficient, reliable, and reconfigurable systems. There is a need, however, to change the operation culture. The current role of NASA as a leader in developing all the new innovative hardware should be altered to save both time and money. We should use all the available hardware/software developed by the industry and use the existing standards rather than inventing our own.

Source record↗
NASA NTRS1992

Coupled elastic response of open section laminated composite beams subject to generalized beam loading

A generalized beam theory for arbitrary open section laminated composite beams subjected to generalized beam loading is developed using a strength of materials approach. At present, the theory is limited to statistically determinate beams. Solution of the general system of equations yields strain and curvature distributions as functions of the axial coordinate x and the contour coordinate s. Average stresses on a given cross section or ply stresses in a local coordinate system are determined using these distributions. Data obtained for thin-walled open section composite beams reveal that elastic coupling occurs among curvatures, shearing strains, and axial strain, depending on the laminate stiffness parameters. Laminate ply layup does not affect the location of the shear center in the thin-wall approximation, but may have a significant impact for thicker walled open sections. The average axial stress distribution is found to be distinctly different from the isotropic distribution, but the average shear stress distribution is the same as that in the isotropic case.

Zvarick, Albert G.↗
NASA NTRS2004

Network Performance Measurements for NASA's Earth Observation System

NASA's Earth Observation System (EOS) Project studies all aspects of planet Earth from space, including climate change, and ocean, ice, land, and vegetation characteristics. It consists of about 20 satellite missions over a period of about a decade. Extensive collaboration is used, both with other US. agencies (e.g., National Oceanic and Atmospheric Administration (NOA), United States Geological Survey (USGS), Department of Defense (DoD), and international agencies (e.g., European Space Agency (ESA), Japan Aerospace Exploration Agency (JAXA)), to improve cost effectiveness and obtain otherwise unavailable data. Scientific researchers are located at research institutions worldwide, primarily government research facilities and research universities. The EOS project makes extensive use of networks to support data acquisition, data production, and data distribution. Many of these functions impose requirements on the networks, including throughput and availability. In order to verify that these requirements are being met, and be pro-active in recognizing problems, NASA conducts on-going performance measurements. The purpose of this paper is to examine techniques used by NASA to measure the performance of the networks used by EOSDIS (EOS Data and Information System) and to indicate how this performance information is used.

Loiacono, Joe↗
DOE OSTI2025

Towards a Robust Adaptive Digital Twin for Fusion Applications

The development of a digital twin system for fusion applications is essential for enhancing the prediction, analysis, and optimization of complex plasma processes. Machine learning (ML), particularly deep learning has demonstrated strong capabilities in modeling such highly nonlinear and intricate systems. However, two critical challenges limit the deployment of deep learning-based digital twins: Uncertainty Quantification (UQ) and data drift. UQ is vital for ensuring trustworthy predictions, especially in decision-support scenarios. Additionally, data-driven models are often sensitive to changes in the underlying data distribution, such as shot-to-shot variations in fusion experiments, which can lead to performance degradation over time. To address these challenges, we are developing an uncertainty-aware, adaptive digital twin framework. Our approach incorporates deep learning models enhanced with Gaussian Process approximations for predictive uncertainty estimation, coupled with an online learning mechanism that enables continuous model adaptation to new experimental data. This adaptive capability allows the data driven models to respond effectively to evolving plasma behaviors and equipment conditions. Specifically, to mitigate the effects of shot-to-shot drift, our system updates itself incrementally as new data becomes available, improving both robustness and fidelity. Our vision is to evolve this data driven model into a self-sustaining digital twin system that leverages UQ based feedback to continuously refine itself and potentially support real-time decision making. This presentation will cover a brief background on uncertainty quantification for ML, our ongoing effort on development of UQ capabilities for ML, our data science pipeline from data collection to model development and analysis and online learning framework for modeling coil deflection at DIII-D. I will also briefly touch upon opportunities and challenges in development of digital twin framework.

Sammuli, Brian [General Atomics]↗
DOE OSTI2020

Effects of Void Morphology on Detonation Initiation of PBX 9502

Accurate predictive modeling of high explosives in abnormal conditions, such as a fire, is critical to personnel safety. Modeling depends heavily on precise physical characterization of the high explosive in question. The aim of this thesis was to characterize the detonation response to shock and the microstructure at high-temperature (250°C) of PBX 9502 and use these data to attempt to model these results using a new reactive burn model called SURF (Scaled Uniform Reactive Front). In order to characterize the shock response of PBX 9502 at high-temperature a 1D gas gun experiment was designed and executed that provided shock to detonation transition data. These data were then used to do a preliminary calibration of SURF for PBX 9502 at 250°C. Small-angle neutron scattering (SANS) was employed to characterize the void morphology of PBX 9502 as a function of temperature. This was done in order to feed a modified version of SURF called physically informed - SURF (π-SURF) which uses the void size and quantity distribution data as measured by SANS along with the deflagration and detonation characteristics of a high explosive to inform the SURF model. The π-SURF model was then used to model both ambient and high-temperature PBX 9502 SDT response and the results were compared to the physically measured results. It was found that π-SURF works in ambient cases. At high-temperature, however, it was determined that not enough information is known about hot spot formation to use the π-SURF model for high-temperature scenarios.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2026

Multidimensional scaling informed by F -statistic: Visualizing grouped microbiome data with inference

Multidimensional scaling (MDS) is a widely used dimensionality reduction technique in microbial ecology data analysis that captures the multivariate structure of the data while preserving pairwise distances between samples. While improvements in MDS have enhanced the ability to reveal group-specific data patterns, these MDS-based methods require prior assumptions for inference, limiting their application in general microbiome analysis. Here, in this study, we introduce a new MDS-based ordination method, “F-informed MDS,” which configures the data distribution based on the F-statistic, the ratio of dispersion between groups sharing common and different characteristics. Using semisynthetic datasets, we demonstrate that the proposed method is robust to hyperparameter selection while maintaining statistical significance throughout the ordination process. Various quality metrics for evaluating dimensionality reduction confirm that F-informed MDS is comparable to state-of-the-art methods in preserving both local and global data structures. Its application to a diatom-associated bacterial community suggests the role of this new method in interpreting the community’s response to the host. Our approach offers a well-founded refinement of MDS that aligns with statistical test results, which can be beneficial for broader multidimensional data analyses in microbiology and ecology. This new visualization tool can be incorporated into standard microbiome data analyses.

Biological and medical sciences↗
NASA NTRS2008

The NPOESS Preparatory Project Science Data Segment (SDS) Data Depository and Distribution Element (SD3E) System Architecture

The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) Science Data Segment (SDS) will make daily data requests for approximately six terabytes of NPP science products for each of its six environmental assessment elements from the operational data providers. As a result, issues associated with duplicate data requests, data transfers of large volumes of diverse products, and data transfer failures raised concerns with respect to the network traffic and bandwidth consumption. The NPP SDS Data Depository and Distribution Element (SD3E) was developed to provide a mechanism for efficient data exchange, alleviate duplicate network traffic, and reduce operational costs.

Ho, Evelyn L.↗
DOE OSTI2023

Measurement of particulated matter (PM1, PM2.5, PM10) using a PM sensor during the SAIL campaign in Gothic, CO and Mt. Crested Butte, CO

We deployed another PM sensor (Modulair-PM, QuantAQ) to measure the mass concentration of particulate matter (PM) for three size cuts at both the main site (M1) and supplementary site (S2) of the SAIL from 14 June 2022 to 14 June 2023. The instruments provide the mass concentration of PM1, PM2.5 and PM10. Mass concentrations were calculated based on measurements made with a nephelometer and an OPC. We used Quant-AQ's algorithm [please see their documentation here and the references within] to determine the mass concentrations reported. Here, we present the time series of sample relative humidity, temperature, pressure, and the mass concentration of PM1, PM2.5 and PM10. We also present the size distribution of the aerosol particles within a diameter range of 0.35 - 40 micron, measured by the OPC of the pm-modulair. However, we encourage caution while using the size distribution data, since it is operated only with the factory calibration. Abstract and description of the campaign can be found here : https://www.arm.gov/research/campaigns/amf2022ssb.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1979

Flight-measured afterbody pressure coefficients from an airplane having twin side-by-side jet engines for Mach numbers from 0.6 to 1.6

Afterbody pressure distribution data were obtained in flight from an airplane having twin side-by-side jet exhausts. The data were obtained in level flight at Mach numbers from 0.60 to 1.60 and at elevated load factors for Mach numbers of 0.60, 0.90, and 1.20. The test altitude varied from 2300 meters (7500 feet) to 15,200 meters (50,000 feet) over a speed range that provided a matrix of constant Mach number and constant unit Reynolds number test conditions. The results of the full-scale flight afterbody pressure distribution program are presented in the form of plotted pressure distributions and tabulated pressure coefficients with Mach number, angle of attack, engine nozzle pressure ratio, and unit Reynolds number as controlled parameters.

Steers, L. L.↗
NASA NTRS1991

Management of the Space Station Freedom onboard local area network

An operational approach is proposed to managing the Data Management System Local Area Network (LAN) on Space Station Freedom. An overview of the onboard LAN elements is presented first, followed by a proposal of the operational guidelines by which management of the onboard network may be effected. To implement the guidelines, a recommendation is then presented on a set of network management parameters which should be made available in the onboard Network Operating System Computer Software Configuration Item and Fiber Distributed Data Interface firmware. Finally, some implications for the implementation of the various network management elements are discussed.

Miller, Frank W.↗
NASA NTRS1992

Striped tape arrays

A growing number of applications require high capacity, high throughput tertiary storage systems. How data striping ideas apply to arrays of magnetic tape drives is investigated. Data striping increases throughput and reduces response time for large accesses to a storage system. Striped magnetic tape systems are particularly appealing because many inexpensive magnetic tape drives have low bandwidth; striping may offer dramatic performance improvements for these systems. There are several important issues in designing striped tape systems: the choice of tape drives and robots, whether to stripe within or between robots, and the choice of the best scheme for distributing data on cartridges. One of the most troublesome problems in striped tape arrays is the synchronization of transfers across tape drives. Another issue is how improved devices will affect the desirability of striping in the future. The results of simulations comparing the performance of striped tape systems to non-striped systems are presented.

Drapeau, Ann L.↗
NASA NTRS1995

Runtime volume visualization for parallel CFD

This paper discusses some aspects of design of a data distributed, massively parallel volume rendering library for runtime visualization of parallel computational fluid dynamics simulations in a message-passing environment. Unlike the traditional scheme in which visualization is a postprocessing step, the rendering is done in place on each node processor. Computational scientists who run large-scale simulations on a massively parallel computer can thus perform interactive monitoring of their simulations. The current library provides an interface to handle volume data on rectilinear grids. The same design principles can be generalized to handle other types of grids. For demonstration, we run a parallel Navier-Stokes solver making use of this rendering library on the Intel Paragon XP/S. The interactive visual response achieved is found to be very useful. Performance studies show that the parallel rendering process is scalable with the size of the simulation as well as with the parallel computer.

Ma, Kwan-Liu↗
DOE OSTI2023

Orchestration of materials science workflows for heterogeneous resources at large scale

In the era of big data, materials science workflows need to handle large-scale data distribution, storage, and computation. Any of these areas can become a performance bottleneck. We present a framework for analyzing internal material structures (e.g., cracks) to mitigate these bottlenecks. We demonstrate the effectiveness of our framework for a workflow performing synchrotron X-ray computed tomography reconstruction and segmentation of a silica-based structure. Our framework provides a cloud-based, cutting-edge solution to challenges such as growing intermediate and output data and heavy resource demands during image reconstruction and segmentation. Specifically, our framework efficiently manages data storage, scaling up compute resources on the cloud. The multi-layer software structure of our framework includes three layers. A top layer uses Jupyter notebooks and serves as the user interface. A middle layer uses Ansible for resource deployment and managing the execution environment. A low layer is dedicated to resource management and provides resource management and job scheduling on heterogeneous nodes (i.e., GPU and CPU). At the core of this layer, Kubernetes supports resource management, and Dask enables large-scale job scheduling for heterogeneous resources. The broader impact of our work is four-fold: through our framework, we hide the complexity of the cloud’s software stack to the user who otherwise is required to have expertise in cloud technologies; we manage job scheduling efficiently and in a scalable manner; we enable resource elasticity and workflow orchestration at a large scale; and we facilitate moving the study of nonporous structures, which has wide applications in engineering and scientific fields, to the cloud. While we demonstrate the capability of our framework for a specific materials science application, it can be adapted for other applications and domains because of its modular, multi-layer architecture.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1985

Space station data system analysis/architecture study. Task 3: Trade studies, DR-5, volume 2

Results of a Space Station Data System Analysis/Architecture Study for the Goddard Space Flight Center are presented. This study, which emphasized a system engineering design for a complete, end-to-end data system, was divided into six tasks: (1); Functional requirements definition; (2) Options development; (3) Trade studies; (4) System definitions; (5) Program plan; and (6) Study maintenance. The Task inter-relationship and documentation flow are described. Information in volume 2 is devoted to Task 3: trade Studies. Trade Studies have been carried out in the following areas: (1) software development test and integration capability; (2) fault tolerant computing; (3) space qualified computers; (4) distributed data base management system; (5) system integration test and verification; (6) crew workstations; (7) mass storage; (8) command and resource management; and (9) space communications. Results are presented for each task.

Source record↗