Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Molecular Dynamics Simulation of Fission Fragment Damage in Nuclear Fuel and Surrogate Material

We have performed classical molecular dynamics simulations of swift heavy ion damage, typical of fission fragments, in nuclear fuel (UO2) for energy deposition per unit length of 3.9 keV/nm. We did not observe amorphization. The damage mainly consisted of isolated point defects. Only about 1% of the displacements occur on the uranium sublattice. Oxygen Frenkel pairs are an order of magnitude more numerous than uranium Frenkel pairs in the primary damage state. In contrast, previous results show that the ratio of Frenkel pairs on the two sublattices is close to the stoichiometric ratio in ceria. These differences in the primary damage state may lead to differences in radiation response of UO2 and CeO2.

Molecular dynamics, radiation damage in materials,↗

River stage influences on uranium transport in a hydrologically dynamic groundwater-surface water transition zone

In this study, a well-field within a uranium (U) plume in the groundwater-surface water transition zone was monitored for a 3 year period for water table elevation and dissolved solutes. The plume discharges to the Columbia River, which displays a dramatic spring stage surge resulting from snowmelt. Groundwater exhibits a low hydrologic gradient and chemical differences with river water. River water intrudes the site in spring. Specific aims were to assess the impacts of river intrusion on dissolved uranium (U aq ), specific conductance (SpC), and other solutes, and to discriminate between transport, geochemical, and source term heterogeneity effects. Time series trends for U aq and SpC were complex and displayed large temporal and well-to-well variability as a result of water table elevation fluctuations, river water intrusion, and changes in groundwater flow directions. The wells were clustered into subsets exhibiting common behaviors resulting from the intrusion dynamics of river water and the location of source terms. Hot-spots in U aq varied in location with increasing water table elevation through the combined effects of advection and source term location. Heuristic reactive transport modeling with PFLOTRAN demonstrated that mobilized U aq was transported between wells and source terms in complex trajectories, and was diluted as river water entered and exited the groundwater system. While U aq time-series concentration trends varied significantly from year-to-year as a result of climate-caused differences in the spring hydrograph, common and partly predictable response patterns were observed that were driven by water table elevation, and the extent and duration of river water intrusion.

54 ENVIRONMENTAL SCIENCES↗

Experimental evidence for dynamic friction on rock fractures from frequency-dependent nonlinear hysteresis and harmonic generation: Low-Frequency Torsional Dynamic Friction

Frictional properties affect the propagation of high-amplitude seismic waves across rock fractures and faults. Laboratory evidence suggests that these properties can be measured in active seismic surveys, potentially offering a route to characterizing friction in situ. Here, we present experimental results from a subresonance torsional modulus and attenuation apparatus that utilizes micron-scale sinusoidal oscillations to probe the nonlinear stress-strain relation at a range of strain amplitudes and rates. Nonlinear effects are further quantified using harmonic distortion; however, time series data best illuminate underlying physical processes. The low-frequency stress-strain hysteretic loops show stiffening at the sinusoid's static ends, but stiffening is reduced above a threshold frequency. This shape is determined by harmonic generation in the strain; the stress signal has no harmonics, confirming that the fractured sample is the source of the nonlinearity. These qualitative observations suggest the presence of rate-dependent friction and are consistent between fractures in three different rock types. We propose that static friction at the low strain rate part of the cycle, when given sufficient “healing” time at low oscillation frequencies, causes this stiffening cusp shape in the hysteresis loop. While rate-and-state friction is commonly used to represent dynamic friction, it cannot capture static friction or negative slip velocities. So we implement another dynamic friction model, based on the work of Dahl, which describes this process and produces similar results. Since the two models have a similar form, parameterizations of field data could constraint fault model inputs, such as specific location velocity strengthening or weakening properties.

58 GEOSCIENCES↗

Selective Host-Guest Interaction between Metal Ions and Metal-Organic Frameworks Using Dynamic Nuclear Polarization Enhanced Solid-State NMR Spectroscopy

The host–guest interaction between metal ions (Pt²⁺ and Cu²⁺) and a zirconium metal–organic framework (UiO-66-NH₂) was explored using dynamic nuclear polarization-enhanced ¹⁵N{¹H} CPMAS NMR spectroscopy supported by X-ray absorption spectroscopy and density functional calculations. The combined experimental results conclude that each Pt²⁺ coordinates with two NH₂ groups from the MOF and two Cl⁻ from the metal precursor, whereas Cu²⁺ do not form chemical bonds with the NH₂ groups of the MOF framework. Density functional calculations reveal that Pt²⁺ prefers a square-planar structure with the four ligands and resides in the octahedral cage of the MOF in either cis or trans configurations.

Guo, Zhiyong↗

Ab initio molecular dynamics simulation of pressure-induced phase transformation in BeO

Ab initio molecular dynamics (MD) method has been used to study high pressure-induced phase transformation in BeO based on the local density approximation (LDA) and the generalized gradient approximation (GGA). Both methods show that the wurtzite (WZ) and zinc blende (ZB) BeO transforms to the rocksalt (RS) structure smoothly at high pressure. The transition pressures obtained from the LDA method are about 40 GPa larger than the GGA result for both WZ → RS and ZB → RS phase transformations, and the phase transformation mechanisms revealed by the LDA and GGA methods are different. For WZ → RS phase transformations both mechanisms obtained from the LDA and GGA methods are not comparable to the previous ab initio MD simulations of WZ BeO at 700 GPa based on the GGA method. It is suggested that the phase transformation mechanisms of BeO revealed by the ab initio MD simulations are affected remarkably by the exchange–correlation functional employed and the way of applying pressure.

36 MATERIALS SCIENCE↗

Dynamic graphs, community detection, and Riemannian geometry

A community is a subset of a wider network where the members of that subset are more strongly connected to each other than they are to the rest of the network. In this paper, we consider the problem of identifying and tracking communities in graphs that change over time {dynamic community detection} and present a framework based on Riemannian geometry to aid in this task. Our framework currently supports several important operations such as interpolating between and averaging over graph snapshots. We compare these Riemannian methods with entry-wise linear interpolation and that the Riemannian methods are generally better suited to dynamic community detection. Next steps with the Riemannian framework include developing higher-order interpolation methods (e.g. the analogues of polynomial and spline interpolation) and a Riemannian least-squares regression method for working with noisy data.

dynamic community detection↗

Floquet dynamics of classical and quantum cavity fields

We show that the time-dependence of electromagnetic field in a periodically modulated cavity can be effectively analyzed using a Floquet map. The map relates the field states separated by one period of the drive; iterative application of the map allows to determine field configuration after arbitrary number of drive periods. For resonant and near-resonant drives, the map has stable and unstable fixed points, which are the loci of infinite energy concentration in the long time limit. The Floquet map method can be applied both to classical and quantum massless field problems, including the dynamical Casimir effect. The stroboscopic time evolution implemented by the map can be interpreted in terms of the wave propagation in a curved space, with the fixed points of the map corresponding to the black hole and white hole horizons. More practically, the map can be used to design protocols for signal compression/decompression, cooling, and sensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of the EAG1 K{sup +} channel selectivity filter assessed by molecular dynamics simulations

EAG1 channels belong to the KCNH family of voltage gated potassium channels. They are expressed in several brain regions and increased expression is linked to certain cancer types. Recent cryo-EM structure determination finally revealed the structure of these channels in atomic detail, allowing computational investigations. In this study, we performed molecular dynamics simulations to investigate the ion binding sites and the dynamical behavior of the selectivity filter. Our simulations suggest that sites S2 and S4 form stable ion binding sites, while ions placed at sites S1 and S3 rapidly switched to sites S2 and S4. Further, ions tended to dissociate away from S0 within less than 20 ns, due to increased filter flexibility. This was followed by water influx from the extracellular side, leading to a widening of the filter in this region, and likely non-conductive filter configurations. Simulations with the inactivation-enhancing mutant Y464A or Na{sup +} ions lead to trapped water molecules behind the SF, suggesting that these simulations captured early conformational changes linked to C-type inactivation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Beyond the standard two-film theory: Computational fluid dynamics simulations for carbon dioxide capture in a wetted wall column

The standard two-film theory (STFT) is a diffusion-based mechanism that can be used to describe gas mass transfer across liquid film. Fundamental assumptions of the STFT impose serious limitations on its ability to predict mass transfer coefficients. To better understand gas absorption across liquid film in practical situations, a multiphase computational fluid dynamics (CFD) model fully equipped with mass transport and chemistry capabilities has been developed for solvent-based carbon dioxide (CO2) capture to predict the CO2 mass transfer coefficient in a wetted wall column. The hydrodynamics is modeled using a volume of fluid method, and the diffusive and reactive mass transfer between the two phases is modeled by adopting a one-fluid formulation. We demonstrate that the proposed CFD model can naturally account for the influence of many important factors on the overall mass transfer that cannot be quantitatively explained by the STFT, such as the local variation in fluid velocities and properties, flow instabilities, and complex geometries. The CFD model also can predict the local mass transfer coefficient variation along the column height, which the STFT typically does not consider.

Wang, Chao↗

Effects of electron-phonon coupling and electronic thermal conductivity in high energy molecular dynamics simulations of irradiation cascades in nickel

The two-temperature model has been applied to investigate the effects of the electronic subsystem on 150 keV Ni ion cascades in nickel using molecular dynamics simulation. We explore the effects of the magnitude of the electron-phonon coupling and the electronic thermal conductivity on defect production and cluster formation. It has been found that stronger electron-phonon coupling allows larger and more rapid energy feedback to the atomic subsystem, leading to reduction of number of point defects and suppression of the formation of larger defect clusters. It was observed that larger electronic thermal conductivity results in slightly increased number of point defects and larger size vacancy clusters. The latter takes place because of suppression of point defects recombination in faster cooling areas of initial damage.

Zarkadoula, Eva↗

Reactive molecular dynamics models from ab initio molecular dynamics data using relative entropy minimization

Here, we present two new multiscale molecular dynamics (MS-RMD) models for the hydrated excess proton in water developed directly from ab initio molecular dynamics (AIMD) simulation data of the same system. The potential of mean force along the proton transfer reaction coordinate and radial distribution functions for the MS-RMD models are shown faithfully reproduce those of AIMD. The models are developed using an algorithm based on relative entropy minimization, thus demonstrating the ability of the method to rapidly generate accurate and highly efficient reactive MD force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bergman-type medium range order in amorphous Zr77Rh23 alloy studied by ab initio molecular dynamics simulations

In recent years, some arguments about the existence of medium-range order (MRO) in the Zr-Rh system have been put forward. However, research on the structural features of the Zr-Rh binary alloy at the atomic level is still lacking. This study uses ab initio molecular dynamics simulations to systematically study the local structures of Zr77Rh23 from the liquid to the glassy states. Pair correlation function (PCF), coordination number (CN), Honeycutt–Anderson(HA) index, bond-angle distribution functions, and the Voronoi tessellation method are used to reveal a clear icosahedral-like configuration in the amorphous Zr77Rh23 alloy. It is noteworthy that the splitting in the second peak of the partial PDF implies the existence of a medium range order (MRO) in the Zr77Rh23 system. We obtain the local order in three-dimensional atomic density distributions by using a new atomistic cluster alignment (ACA) method. Interestingly, a Bergman-type MRO is observed in the glassy Zr77Rh23. Furthermore, the spatial distribution and connections of icosahedral-like clusters are shown to further demonstrate the MRO network. Our findings shed light on the nature of atomic local structures of amorphous Zr77Rh23 alloy and have important implications to understanding the formation of various MROs in metallic glasses.

Guo, Y. R.↗

Sensitivity analysis on chaotic dynamical systems by Non-Intrusive Least Squares Shadowing (NILSS)

This paper develops the Non-Intrusive Least Squares Shadowing (NILSS) method, which computes the sensitivity for long-time averaged objectives in chaotic dynamical systems. In NILSS, we represent a tangent solution by a linear combination of one inhomogeneous tangent solution and several homogeneous tangent solutions. Next, we solve a least squares problem using this representation; thus, the resulting solution can be used for computing sensitivities. NILSS is easy to implement with existing solvers. In addition, for chaotic systems with many degrees of freedom but few unstable modes, NILSS has a low computational cost. NILSS is applied to two chaotic PDE systems: the Lorenz 63 system and a CFD simulation of flow over a backward-facing step. In both cases, the sensitivities computed by NILSS reflect the trends in the long-time averaged objectives of dynamical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A dynamic likelihood approach to filtering transport processes: advection-diffusion dynamics

A Bayesian data assimilation scheme is formulated for advection-dominated advective and diffusive evolutionary problems, based upon the Dynamic Likelihood (DLF) approach to filtering. The DLF was developed specifically for hyperbolic problems –waves–, and in this paper, it is extended via a split step formulation, to handle advection-diffusion problems. In the dynamic likelihood approach, observations and their statistics are used to propagate probabilities along characteristics, evolving the likelihood in time. The estimate posterior thus inherits phase information. For advection-diffusion the advective part of the time evolution is handled on the basis of observations alone, while the diffusive part is informed through the model as well as observations. We expect, and indeed show here, that in advection-dominated problems, the DLF approach produces better estimates than other assimilation approaches, particularly when the observations are sparse and have low uncertainty. The added computational expense of the method is cubic in the total number of observations over time, which is on the same order of magnitude as a standard Kalman filter and can be mitigated by bounding the number of forward propagated observations, discarding the least informative data.

97 MATHEMATICS AND COMPUTING↗

Molecular dynamics simulation studies of structural and dynamical properties of rapidly quenched Al

The structural and dynamical properties of rapidly quenched Al are studied by molecular dynamics simulations. The pair-correlation function of high temperature liquid Al agrees well with the experimental results. Different cooling rates are applied with high cooling rates leading to glass formation, while low cooling rates leading to crystallization. The local structures are characterized by Honeycutt–Andersen indices and Voronoi tessellation analysis. The results show that for high cooling rates, the local structures of the liquid and glassy Al are predominated by icosahedral clusters, together with considerable amount of face-centered cubic and hexagonal close packed short-range orders. These short-range order results are further confirmed using the recently developed atomic cluster alignment method. Moreover, the atomic cluster alignment clearly shows the crystal nucleation process in supercooled liquid of Al. Finally, the mean square displacement for the liquid is also analyzed, and the corresponding diffusion coefficient as a function of temperature is calculated.

36 MATERIALS SCIENCE↗

Monte Carlo Simulation of Borosilicate Glass Dissolution using Molecular Dynamics-Generated Glass Structures

Atomic-scale insights into the dissolution mechanisms of borosilicate glasses are critical to the development of the waste form corrosion models that inform performance assessments of nuclear waste disposal facilities. Monte Carlo (MC) simulations have been instrumental in advancing the state of knowledge of borosilicate glass dissolution; however, all such simulations to date have relied on lattices to represent the amorphous glass structure, thereby potentially introducing artifacts. Therefore, a new approach, referred to as the amorphous MC approach, has been developed whereby glass structures generated from molecular dynamics simulations are used as starting points for MC simulations of glass dissolution. MC simulations of sodium borosilicate glasses that covered a wide compositional range were performed and revealed correlations between dissolution rate and structural features of the glasses. Notably, the lattice MC approach predicted the fraction of tetrahedral boron to have a lesser influence on the dissolution rate than computed with the amorphous MC approach. The lattice MC simulations also overestimated the dissolution rate for a given glass composition. These findings highlight the importance of using truly amorphous structures in MC simulations of glass corrosion.

Kerisit, Sebastien N.↗