Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Net diffusivity in ocean general circulation models with nonuniform grids

The numerical vertical diffusivity K(num), embedded in a numerical ocean general circulation model with nonuniform vertical grid, is estimated. It is shown that in a downwelling region, K(num) is negative for a grid with grid size increasing with depth. When the grid size increment, or the downward vertical velocity, is large, K(num) may exceed the vertical diffusivity specified and may result in a negative effective vertical diffusivity. Therefore care needs to be taken to specify the vertical diffusivity in a numerical model with nonuniform grid, and a lower bound is generally imposed in order to avoid an unphysical negative value. Some possible effects of the negative effective diffusivity are discussed.

Yin, F. L.↗

Hydrodynamic Suppression of Soot Formation in Laminar Coflowing Jet Diffusion Flames

Effects of flow (hydrodynamic) properties on limiting conditions for soot-free laminar non-premixed hydrocarbon/air flames (called laminar soot-point conditions) were studied, emphasizing non-buoyant laminar coflowing jet diffusion flames. Effects of air/fuel-stream velocity ratios were of particular interest; therefore, the experiments were carried out at reduced pressures to minimize effects of flow acceleration due to the intrusion of buoyancy. Test conditions included reactant temperatures of 300 K; ambient pressures of 3.7-49 8 kPa; methane-, acetylene-, ethylene-, propane-, and methane-fueled flames burning in coflowing air with fuel-port diameters of 1.7, 3.2, and 6.4 mm, fuel jet Reynolds numbers of 18-121; air coflow velocities of 0-6 m/s; and air/fuel-stream velocity ratios of 0.003-70. Measurements included laminar soot-point flame lengths, laminar soot-point fuel flow rates, and laminar liftoff conditions. The measurements show that laminar soot-point flame lengths and fuel flow rates can be increased, broadening the range of fuel flow rates where the flames remain soot free, by increasing air/fuel-stream velocity ratios. The mechanism of this effect involves the magnitude and direction of flow velocities relative to the flame sheet where increased air/fuel-stream velocity ratios cause progressive reduction of flame residence times in the fuel-rich soot-formation region. The range of soot-free conditions is limited by both liftoff, particularly at low pressures, and the intrusion of effects of buoyancy on effective air/fuel-stream velocity ratios, particularly at high pressures. Effective correlations of laminar soot- and smoke-point flame lengths were also found in terms of a corrected fuel flow rate parameter, based on simplified analysis of laminar jet diffusion flame structure. The results show that laminar smoke-point flame lengths in coflowing air environments are roughly twice as long as soot-free (blue) flames under comparable conditions due to the presence of luminous soot particles under fuel-lean conditions when smoke-point conditions are approached. This is very similar to earlier findings concerning differences between laminar smoke- and sootpoint flame lengths in still environments.

Dai, Z.↗

A numerical study of the effects of heat diffusion through the base of the mixed layer

In the present paper, a simple numerical model is used to study the warming of the mixed layer during the early summer. It is shown that the springtime temperature increase in the layer below the mixed layer (for example, in the cold pool on a continental shelf) has a maximum value which occurs for a limiting value of the surface heat flux. This is a result of the positive feedback at large Richardson numbers between stability and vertical diffusion of heat. The springtime temperature increase in the mixed layer increases nonlinearly with surface heat flux, because of the same positive feedback. The effects of interseasonal fluctuations of the surface heat flux on the spring and summer mixed layer and deeper temperature increases can be as great as the effect of interseasonal fluctuations of the average heat flux.

Posmentier, E. S.↗

Effects of signal diffusion on x-ray phase contrast images

We discuss the problem of signal diffusion among neighbouring pixels in x-ray phase contrast imaging (XPCi) specifically for coded-aperture (CA) XPCi, but many of the discussed observations are directly transferable to other XPCi modalities. CA XPCi exploits the principle of pixel edge illumination by means of two CA masks. The first mask, placed in contact with the detector, creates insensitive regions between adjacent pixels; the second one, placed immediately before the sample, creates individual beams impinging on the boundaries between sensitive and insensitive regions on the detector, as created by the detector mask. In this way, edge illumination is achieved for all pixels of an area detector illuminated by a divergent and polychromatic beam generated by a conventional source. As the detector mask redefines the resolution properties of the detector, sample dithering can be used to effectively increase the system spatial resolution, without having to apply any post-processing procedure (e.g., deconvolution). This however creates artifacts in the form of secondary fringes (which have nothing to do with phase-related secondary fringes) if there is signal diffusion between adjacent pixels. In non-dithered images, signal diffusion between adjacent pixels causes a reduction in image contrast. This effect is investigated both theoretically and experimentally, and its direct implications on image quality are discussed. The interplay with the sample positioning with respect to the detector pixel matrix, which also has an effect on the obtained image contrast, is also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The kinetic Sunyaev-Zel'dovich effect from the diffuse gas in the Local Group

Since the Local Group (LG) of galaxies moves with a bulk velocity with respect to the cosmic microwave background radiation (CMB), free electrons in its gaseous halo should imprint large-scale non-primordial temperature shifts in the CMB via the kinetic Sunyaev-Zel'dovich (kSZ) effect. By modeling the distribution of gas in the LG halo and using its inferred velocity with respect to the CMB, we calculate the resulting kSZ signal from the diffuse LG medium. We find that it is dominated by a hot spot ∼ 10° in size in the direction of M31, where the optical depth of free electrons is the greatest. By performing a correlation analysis, we find no statistical evidence that the kSZ signal from model of the LG halo is embedded in the CMB temperature map measured by the Planck satellite. We constrain the amount of mass in the LG halo by limiting the kSZ temperature shift around the hot spot to be smaller than the observed temperature shift in the Planck map. We find the tightest constraints for models where the halo mass is highly concentrated, with the mass limited to roughly 2.5–5 × 10{sup 12}M{sub ⊙}, but note that halos with such high concentrations are rare.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of experimental methods for estimating matrix diffusion coefficients for contaminant transport modeling

Here, diffusion cell and diffusion wafer experiments were conducted to compare methods for estimating effective matrix diffusion coefficients in rock core samples from Pahute Mesa at the Nevada Nuclear Security Site (NNSS). A diffusion wafer method, in which a solute diffuses out of a rock matrix that is pre-saturated with water containing the solute, is presented as a simpler alternative to the traditional through-diffusion (diffusion cell) method. Both methods yielded estimates of effective matrix diffusion coefficients that were within the range of values previously reported for NNSS volcanic rocks. The difference between the estimates of the two methods ranged from 14 to 30%, and there was no systematic high or low bias of one method relative to the other. From a transport modeling perspective, these differences are relatively minor when one considers that other variables (e.g., fracture apertures, fracture spacings) influence matrix diffusion to a greater degree and tend to have greater uncertainty than effective matrix diffusion coefficients. For the same relative random errors in concentration measurements, the diffusion cell method yields effective matrix diffusion coefficient estimates that have less uncertainty than the wafer method. However, the wafer method is easier and less costly to implement and yields estimates more quickly, thus allowing a greater number of samples to be analyzed for the same cost and time. Given the relatively good agreement between the methods, and the lack of any apparent bias between the methods, the diffusion wafer method appears to offer advantages over the diffusion cell method if better statistical representation of a given set of rock samples is desired.

54 ENVIRONMENTAL SCIENCES↗

Effect of computed horizontal diffusion coefficients on two-dimensional N2O model distributions

The effects of horizontal diffusion coefficients K(yy) and K(yz), computed directly from the residual circulation, on the N2O distribution in a photochemical model were investigated, using a modified version of the two-dimensional model of Guthrie et al. (1984). The residual circulation was computed using the NMC's temperature data and the heating rates reported by Rosenfield et al. (1987). As compared with the effect of the residual circulation alone, the use of horizontal diffusion coefficients produced substantial changes in the N2O distribution and increased the N2O's lifetime values by a few percent. It is suggested that trace gases, such as CH4, CFCl3, CF2Cl2, CH3Cl, and CCl4, which impact the NO(x), HO(x), and Cl(x) radical distributions and therefore ozone, will be influenced in a similar manner by the addition of more realistic diffusion fields.

Jackman, Charles H.↗

Diffusion filter eliminates fringe effects of coherent laser light source

Diffusion filter comprised of small particles in colloidal suspension reduces the coherence of a laser beam used as a photographic light source. Interference patterns which obscure details in photographic film are eliminated, the intensity and collimation are moderately affected.

Olsasky, M. J.↗

Effects of Impeller-Diffuser Interaction on Centrifugal Compressor Performance

This research program focuses on characterizing the effect of impeller-diffuser interactions in a centrifugal compressor stage on its performance using unsteady threedimensional Reynolds-averaged Navier-Stokes simulations. The computed results show that the interaction between the downstream diffuser pressure field and the impeller tip clearance flow can account for performance changes in the impeller. The magnitude of performance change due to this interaction was examined for an impeller with varying tip clearance followed by a vaned or vaneless diffuser. The impact of unsteady impeller-diffuser interaction, primarily through the impeller tip clearance flow, is reflected through a time-averaged change in impeller loss, blockage and slip. The results show that there exists a tip clearance where the beneficial effect of the impeller-diffuser interaction on the impeller performance is at a maximum. A flow feature that consists of tip flow back leakage was shown to occur at design speed for the centrifugal compressor stage. This flow phenomenon is described as tip flow that originates in one passage, flows downstream of the impeller trailing edge and then returns to upstream of the impeller trailing edge of a neighboring passage. Such a flow feature is a source of loss in the impeller. A hypothesis is put forth to show that changing the diffuser vane count and changing impeller-diffuser gap has an analogous effect on the impeller performance. The centrifugal compressor stage was analyzed using diffusers of different vane counts, producing an impeller performance trend similar to that when the impeller-diffuser gap was varied, thus supporting the hypothesis made. This has the implication that the effect impeller performance associated with changing the impeller-diffuser gap and changing diffuser vane count can be described by the non-dimensional ratio of impeller-diffuser gap to diffuser vane pitch. A procedure is proposed and developed for isolating impeller passage blockage change without the need to define the region of blockage generation (which may incur a certain degree of arbitrariness). This method has been assessed for its applicability and utility.

Tan, Choon S.↗

Effects of preferential diffusion on the burning intensity of curved flames

Using the Bunsen flame as a model curved flame, the coupled influence of preferential diffusion and flame stretch on the burning intensity of lean and rich mixtures of methane, propane, butane, ethylene, and hydrogen with air has been experimentally studied. The results substantiate theoretical predictions and quantify previous experimental observations that, for mixtures whose effective Lewis numbers (Le) are less than unity, the flame temperature is less than the adiabatic flame temperature. This temperature also decreases towards the flame tip, which has the largest curvature and therefore may locally extinguish. The dominance of diffusional transport in influencing the intensity of curved flames is demonstrated by showing that the tip opening of the highly diffusive hydrogen/air flames occurs at constant hydrogen equivalence ratios of about 1.15 to 1.20, being almost independent of the flow intensity and uniformity.

Mizomoto, M.↗

Steady state effects in a two-pulse diffusion-weighted sequence

In conventional nuclear magnetic resonance (NMR) diffusion measurements a significant amount of experimental time is used up by magnetization recovery, serving to prevent the formation of the steady state, as in the latter case the manifestation of diffusion is modulated by multiple applications of the pulse sequence and conventional diffusion coefficient inference procedures are generally not applicable. Here, an analytical expression for diffusion-related effects in a two-pulse NMR experiment (e.g., pulsed-gradient spin echo) in the steady state mode (with repetition times less than the longitudinal relaxation time of the sample) is derived by employing a Fourier series expansion within the solution of the Bloch-Torrey equations. Considerations are given for the transition conditions between the full relaxation and the steady state experiment description. The diffusion coefficient of a polymer solution (polyethylene glycol) is measured by a two-pulse sequence in the full relaxation mode and for a range of repetition times, approaching the rapid steady state experiment. The precision of the fitting employing the presented steady state solution by far exceeds that of the conventional fitting. Additionally, numerical simulations are performed yielding results strongly supporting the proposed description of the NMR diffusion measurements in the steady state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On upstream blocking in a viscous diffusive stratified flow

The effect of diffusion of specie upon the flow about a transverse flat plate moving horizontally in a viscous stratified medium is considered. Asymptotic expansions are used to define a parameter regime where a viscous-diffusive-buoyancy balance is dominant. The solution, expressed in terms of an inverse Fourier transform, is numerically integrated. The results show that, as in the non-diffusive problem, a region of closed streamlines exists ahead of the body. However, unlike the case where diffusion is neglected, the density field within this recirculating region is uniquely determined and found to be statically stable. It is also found that varying the relative amount of diffusion affects not only the density distribution, but the velocity profile as well, indicating a strong coupling between the vorticity and specie equation.

Koop, C. G.↗

EFFECT OF AMBIPOLAR DIFFUSION ON THE NONLINEAR EVOLUTION OF MAGNETOROTATIONAL INSTABILITY IN WEAKLY IONIZED DISKS

We study the role of ambipolar diffusion (AD) on the nonlinear evolution of the magnetorotational instability (MRI) in protoplanetary disks using the strong coupling limit, which applies in very weakly ionized gas with electron recombination time much shorter than the orbital time so that a single-fluid treatment is sufficient. The effect of AD in this limit is characterized by the dimensionless number Am, the frequency at which neutral particles collides with ions normalized to the orbital frequency. We perform three-dimensional unstratified shearing-box simulations of the MRI over a wide range of Am as well as different magnetic field strengths and geometries. The saturation level of the MRI turbulence depends on the magnetic geometry and increases with the net magnetic flux. There is an upper limit to the net flux for sustained turbulence, corresponding to the requirement that the most unstable vertical wavelength be less than the disk scale height. Correspondingly, at a given Am, there exists a maximum value of the turbulent stress {alpha}{sub max}. For Am {approx}< 1, the largest stress is associated with a field geometry that has both net vertical and toroidal flux. In this case, we confirm the results of linear analyses that show the fastest growing mode has a non-zero radial wavenumber with a growth rate exceeding that of the pure vertical field case. We find there is a very tight correlation between the turbulent stress {alpha} and the plasma ({beta}) {identical_to} P{sub gas}/P{sub mag} {approx} 1/2{alpha} at the saturated state of the MRI turbulence regardless of field geometry, and {alpha}{sub max} rapidly decreases with decreasing Am. In particular, we find {alpha}{sub max} {approx} 7 x 10{sup -3} for Am = 1 and {alpha}{sub max} {approx} 6 x 10{sup -4} for Am = 0.1.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Degradation of the Effectiveness of Nonlinear Diffusion Acceleration with Parallel Block Jacobi Splitting

MOOSE's radiation transport module Rattlesnake comprises a first order S N solver that can be accelerated with a flexible Nonlinear Diffusion Acceleration. At each NDA iteration, the streaming and collision operator of the S{sub N} equations are (approximately) inverted using a transport sweep. When executed on multiple processors parallel block Jacobi (PBJ) splitting is utilized lagging the processor sub-domain's incoming angular fluxes making the implemented method asynchronous, i.e. the convergence properties of NDA become dependent on the number of concurrent tasks and details of the partitioning. Within this work, we study the NDA convergence properties for the two-dimensional C5G7 benchmark problem PBJ with p = 1, 2, 4, 8, 12, 16, 24, 32, 48, 60, 72, 96 and 144 concurrent tasks. Rosa studied the convergence properties of PBJ splitting methods with and without transport synthetic acceleration (TSA) in slab geometry and two-dimensional Cartesian geometry, respectively. Rosa's iteration scheme lags both the incoming angular fluxes and the scattering source making it very similar to the method described here. Rosa found by means of Fourier analysis that convergence of unaccelerated PBJ can degrade for optically thin subdomains, i.e. for a large number of processors given a fixed domain size. Depending on the choice of parameters application of TSA can lead to an effective algorithm. In contrast to Rosa's work, this work focuses on PBJ splitting for NDA accelerated solution of the multigroup eigenvalue problem. Later, Zerr and Anistratov used their integral transport matrix method in conjunction with PBJ. This iteration scheme is different as it does not lag the scattering source. Nevertheless, Fourier analysis with Diamond Difference spatial discretization showed that the method degrades with increasing the overall size of the spatial domain while keeping the sub-domain size constant. In the case of an infinite medium, the observed spectral radius becomes unity. These references establish the iterative performance of PBJ for one-group fixed source problems discretized on rectangular cells, but for the Rattlesnake first order NDA method, an emphasis lies on multigroup eigenvalue problems. In this setting, the additional complication arises that the low order equations are not exactly inverted, but only to some iterative criterion. Further, as the low order problem is solved using Jacobian-Free Newton Krylov methods, a suitable preconditioner for the GMRES iterations is required. As the effectiveness of the preconditioners may decrease when more concurrent processes are used, we expect the low order solve to impact the overall effectiveness of the NDA method in parallel execution as well. Therefore, this work focuses on the question of how detrimental the asynchronicity of the high and low order iterative solutions is for the effectiveness of NDA solutions of realistic, unstructured grid, multigroup eigenvalue problems. The iterative convergence properties of Rattlesnake's NDA method for multigroup eigenvalue problems are studied for varying number of concurrent processes. Rattlesnake's NDA method is asynchronous because the high order transport sweep uses PBJ splitting and because the low order solve's preconditioners, algebraic multigrid and additive Schwarz, are asynchronous. We found that up to 144 processes the number of Picard iterations increases by a factor of 2-3 affecting but not destroying NDA's parallel performance for the C5G7 benchmark problem, a representative LWR (light water reactor) configuration. The solution of the NDA low order eigenvalue problem posed greater problems than expected for the solvers currently available in Rattlesnake mainly because of problems to effectively precondition the modified low-order problem. As a matter of fact, the low order problem becomes an advection-diffusion problem. Non-robustness was observed for the AMG preconditioned coarse mesh acceleration for more than 60 concurrent processes, which was fixed by increasing the number of permissible V-cycles per AMG call. For fine mesh acceleration AMG proved to be ineffective and we resorted to ASM. For both AMG and ASM, increasing number of linear iterations per nonlinear are observed when increasing the number of processes, but for ASM this problem appears to be worse. The results from this work also indicate that initial development efforts should be diverted from implementation of a high-order parallel sweeping algorithm to the effective and robust iterative solution of the low order NDA multigroup eigenvalue problem. (authors)

97 MATHEMATICS AND COMPUTING↗

Strengthening model development and effects of low diffusing solutes to coarsening resistance in aluminum alloys

A modified Orowan strengthening model is proposed to account for finite rod-shaped precipitates with hemispherical caps in aluminum alloy systems. A combined computational and experimental approach is used to study the influences of anisotropic Orowan looping and solute-dislocation interaction on temperature-dependent yield strength. Here, the strengthening model is validated with a dataset containing 297 experimental precipitate geometries, chemistries, temperatures, and strength measurements, and achieves a strong predictive correlation of 0.8713 with experimentally measured yield strengths. Under conditions that are applicable to coarsening, constant particle volume fraction and aspect ratio, the model predicts that short rod precipitates provide far superior strengthening effects compared to plate precipitates. A cast Al-Si-Mg-Cu alloy with rod-shaped Q-phase (Al 3 Cu 2 Mg 9 Si 7 ) precipitates was developed with a novel chemistry exploring the use of low-diffusivity elements (Mn, Ni, V, Zr) to limit precipitate coarsening. The thermodynamic behavior of Mn, Ni, V, and Zr across the Q-phase interface is examined using transmission electron microscopy (TEM), first-principles density-functional theory (DFT) calculations. and atom-probe tomography (APT). DFT calculations utilizing TEM identified Q-phase/Al-matrix interfaces show that Mn, Ni, V, and Zr preferentially segregate to the Q-phase precipitate boundaries which suggests inhibition of precipitate coarsening and higher strengths after temperature exposure. Atom-probe tomography confirms solute atom partitioning/segregation at the Q-phase/Al-matrix interface, found in the modified commercial AS7GU alloy (A356 +0.5%Cu), which supports these observations.

36 MATERIALS SCIENCE↗

The effects of the diffuse radiation fields due to multiple scattering and thermal reradiation by dust on the dynamics and thermodynamics of a dusty cometary atmosphere

A self-consistent model of a dirty, clathrate cometary nucleus is extended to account for diffuse radiation fields caused by multiple scattering and thermal reradiation of the solar continuum by dust. The model is configured to fit conditions expected for the various spacecraft which will encounter Halley's comet at 0.89 AU. The atmosphere is assumed a chemically reactive dust-gas mixture in quasi-steady spherically symmetric expansion. The effect of electron-neutral ion collisions is accounted for, along with rate constants of the various species of clathrate ice particles and radiative transfer of the solar input in the UV, visible and near-IR intervals. The opacity of the circumnuclear dust is projected to be an order of magnitude greater than previous estimates, which severely impacts the potential visibility of the nucleus to the cameras of the flyby satellites.

Marconi, M. L.↗