Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Lidar measurements of yawed-wind-turbine wakes: characterization and validation of analytical models

Abstract. Wake measurements of a scanning Doppler lidar mounted on the nacelle of a full-scale wind turbine during a wake-steering experiment were used for the characterization of the wake flow, the evaluation of the wake-steering set-up, and the validation of analytical wake models. Inflow-scanning Doppler lidars, a meteorological mast, and the supervisory control and data acquisition (SCADA) system of the wind turbine complemented the set-up. Results from the wake-scanning Doppler lidar showed an increase in the wake deflection with the yaw angle and that the wake deflection was not in all cases beneficial for the power output of a downstream turbine due to a bias of the inflow wind direction perceived by the yawed wind turbine and the wake-steering design implemented. Both observations could be reproduced with an analytical model that was initialized with the inflow measurements. Error propagation from the inflow measurements that were used as model input and the power coefficient of a waked wind turbine contributed significantly to the model uncertainty. Lastly, the span-wise cross section of the wake was strongly affected by wind veer, masking the effects of the yawed wind turbine on the wake cross sections.

17 WIND ENERGY↗
DOE OSTI2023

On the Short-scale Spatial Variability of Electron Inflows in Electron-only Magnetic Reconnection in the Turbulent Magnetosheath Observed by MMS

We investigate the detailed properties of electron inflow in an electron-only reconnection event observed by the four Magnetospheric Multiscale (MMS) spacecraft in the Earth's turbulent magnetosheath downstream of the quasi-parallel bow shock. The lack of ion coupling was attributed to the small-scale sizes of the current sheets, and the observed bidirectional super-Alfvénic electron jets indicate that the MMS spacecraft crossed the reconnecting current sheet on both sides of an active X-line. Remarkably, the MMS spacecraft observed the presence of large asymmetries in the two electron inflows, with the inflows (normal to the current sheet) on the two sides of the reconnecting current layer differing by as much as a factor of four. Furthermore, even though the four MMS spacecraft were separated by less than seven electron skin depths, the degree of inflow asymmetry was significantly different at the different spacecraft. The asymmetry in the inflow speeds was larger with increasing distances downstream from the reconnection site, and the asymmetry was opposite on the two sides of the X-line. We compare the MMS observations with a 2D kinetic particle-in-cell (PIC) simulation and find that the asymmetry in the inflow speeds stems from in-plane currents generated via the combination of reconnection-mediated inflows and parallel flows along the magnetic separatrices in the presence of a large guide field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Alteration of phycobilisome excitation energy transfer properties in response to attenuations in peripheral electron flow

In Synechocystis sp. PCC 6803 ( S . 6803), two types of phycobilisome (PBS) complexes, CpcG-PBS and CpcL-PBS, function to harvest light energy for photosynthetic reaction centers (RCs), photosystem I (PSI) and photosystem II (PSII). The compositional differences between these two forms of PBS and their specificity for RCs have led to suggestions that they may differ in function. To address this question, we examined how PBS-RC interactions, and the transfer of excitation energy from PBS to RCs, might be adjusted under conditions where electron demand and photon availability are modulated. The CpcG-PBS, CpcL-PBS, and RC complexes were isolated from a S . 6803 strain defective in expression of flavodiiron 1 (oxygen reduction reaction 1, ORR1) grown under varied light regimes. The energy transfer preference from CpcL-PBS to either PSI or PSII was investigated by in vitro crosslinking and 77 K fluorescence emission spectroscopy to assess energy transfer efficiency under photoexcitation. While the results demonstrate that the transfer of excitation energy from CpcL-PBS favors PSI over PSII in WT strains as previously shown, the preference of CpcL-PBS switches from PSI to PSII in ORR1 strains. Surprisingly, this change in preference was reproduced when ORR1 CpcL-PBS was crosslinked with WT RCs, or when WT CpcL-PBS was cross-crosslinked with ORR1 RCs, indicating there are physical modifications to both PBS and RCs that mediate the preference switch. In contrast, the analysis with ORR1 CpcG-PBS shows similar preferences to WT. Additionally, PBS populations in ORR1 shifted to a greater proportion of CpcL-PBS relative to CpcG-PBS. These results demonstrate that under conditions where electron utilization changes, there is a tuning of the excitation energy allocation from CpcL-PBS to RCs to manage the energy distribution for photosynthesis under dynamic flux conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Grain Size Variations in the Murray Formation: Stratigraphic Evidence for Changing Depositional Environments in Gale Crater, Mars

The lowermost exposure of the Murray formation in Gale crater, Mars, was interpreted as sediment deposited in an ancient lake based on data collected by the Curiosity rover. Constraining the stratigraphic extent and duration of this environment has important implications for the paleohydrology of Gale. Insights into early Martian environments and paleofluid flow velocity can be obtained from grain size in rocks. Visual inspection of grain size is not always available for rocks investigated at field sites on Mars due to limited image coverage. But grain sizes can also be estimated from the Gini Index Mean Score, a grain-size proxy that uses point-to-point chemical variations in ChemCam Laser Induced Breakdown Spectroscopy data. Here, new Gini Index Mean Score results indicate that the Murray formation is dominated by mudstones with grains smaller than the spatial resolution of all rover cameras. Intervals of fine to coarse sandstone also are present, some of which are verified using observations of grain size and sedimentary structures in associated images. Overall, results demonstrate that most of the Murray consists of mudstone, suggesting settling of grains from suspension in low energy depositional environments such as lakes. Some of the mudstones contain desiccation cracks indicating periods of drying with a lowering of lake water level. However, beds and lenses of cross-bedded sandstones are common at specific intervals, suggesting episodes of fluvial and possibly eolian deposition. The persistence of lacustrine deposits interspersed with fluvial deposits suggests that liquid water was sustained on the Martian surface for tens of thousands to millions of years.

58 GEOSCIENCES↗
DOE OSTI2021

Causality, intermittence, and crossphase evolution during confinement transitions in the TJ-II stellarator

In this work, we study spontaneous electron to ion root transitions in TJ-II using Langmuir probes. By scanning the probe position on a shot to shot basis, we reconstruct a spatiotemporal map of the evolution of important turbulent quantities in the plasma edge region. We pay particular attention to the evolution of the cross phase between transport-relevant variables, showing the spatiotemporal evolution of this quantity for the first time, revealing the outward propagation of the changes associated with the transition. Additionally, we also compute the intermittence parameter, which allows us to conclude that the turbulence, although its amplitude increases, condenses in a reduced number of dominant modes and becomes less bursty. The causal relationship between variables is studied using the transfer entropy, clarifying the interactions between the main variables and offering a rather complete picture of the complex evolution of the plasma across the confinement transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Geothermal Play-Fairway Analysis of Washington State Prospects: Final Report

The Washington State Geothermal Play-Fairway Analysis overcomes the exploration challenges posed by dense vegetation, glacial deposits, and extreme precipitation. The geothermal play-fairways we target are locations where heat, permeability, and saturated porosity are present in sufficient volume to provide adequate heat exchange at depths accessible by modern drilling technology. The three study areas lie along the Cascade Range magmatic arc and are near Mount Baker, Mount St. Helens, and the Wind River Valley. The seven-year project is divided into three phases. In Phase 1 we build on a previous statewide assessment of geothermal resources and develop an initial modeling approach. The results are a series of favorability, uncertainty, and risk maps for three targeted study areas. Based on these initial results, we collect new geologic and geophysical data to further refine our modeling and reduce exploration uncertainty in Phase 2. We improve the modeling method to handle the new data and update the favorability, uncertainty, and risk maps. We also update the conceptual geothermal resource models. In Phase 3 we validate our modeling approach by drilling two temperature-gradient holes and collecting and analyzing core, image logs, and new geochemistry. Our modeling approach improves on an earlier statewide method through a more-rigorous and detailed assessment of heat and permeability. Permeability potential is assessed through geomechanical modeling of the deformation that can generate and maintain reservoir porosity and permeability. Metrics to inform heat potential include temperature-gradient wells, which are sparse in Washington; proximity of Quaternary volcanic vents and young intrusive rock; spring temperature; and reservoir temperature inferred from geothermometry. We weight the individual components using an expert-guided approach known as the Analytical Hierarchy Process. During Phase 2 we also develop a fluid-filled fracture model, and an infrastructure model that helps to delineate areas which are more favorable for geothermal development based on proximity to transmission lines, elevation, land ownership and use restrictions, and availability of process water. New geologic and geophysical data is collected during Phase 2 in each of our three main study areas. At Mount Baker and north of Mount St. Helens we conduct 1:24,000-scale geologic mapping and lidar analysis to better constrain the location and character of surface faults; detailed mapping in the Wind River Valley was completed just prior to the start of this project. Ages of intrusive rocks are determined with 40 Ar/ 39 Ar geochronology, though all of our samples are Miocene or older. We collect ground based gravity observations (a total of 1,580 new stations) in all of our study areas and ground-based magnetic lines (a total of 93 km) at Mount Baker. These data are combined with existing gravity and aeromagnetic data and used to constrain fault locations and geometry. Two to three cross sections are constructed at each study area using the mapped surface geology and forward-modeling of the gravity and magnetic data; these cross sections form the basis for our updated conceptual models. We collect magnetotelluric surveys at Mount Baker and Mount St. Helens and these data are inverted to form a resistivity model from the surface to about 10 km depth; each model shows conductive zones that can be interpreted as upwelling geothermal fluids. At Mount St. Helens we deploy a passive seismic array and use the newly detected events to refine the location of the Saint Helens seismic zone. We also employ ambient-noise tomography to develop a detailed seismic-velocity model for the study area and use this model to help constrain our cross sections and conceptual model. Based on the new data collected during Phase 2—and our updated models—we develop a campaign of temperature-gradient holes and core analysis to validate our modeling in Phase 3. Drill hole MB76-31 is located near Little Park Creek, 11 km west-southwest of the summit of Mount Baker, and is 1,471 ft deep. About 410 ft of core from the lower portion of the hole—and image logs from ~175 ft below ground surface to the bottom—are collected and analyzed. Water samples are collected and processed for geothermometry. Drill hole MSH17-24 is located along upper Schultz Creek, 16 km north-northeast of Mount St. Helens and has core from 470 ft to the bottom at 1,053 ft. We did not collect image logs due to borehole stability concerns, but water samples are collected and analyzed for geothermometry. Repeat temperature-gradient measurements are made at both sites and thermal conductivity is measured from core samples. At MB76-31, the equilibrated temperature gradient of 64°C/km and calculated heat flow of 141–159 mW/m 2 is more than twice the regional average. Detailed mapping and analysis of the core, coupled with correlation to the image logs, indicates a history of permeability generation consistent with our predictions of high permeability. Because the site has high favorability in the Phase 2 model, we consider the results a positive validation of the modeling. At site MSH17-24, the equilibrated temperature gradient of ~15°C/km and calculated heat flow of 41–43 mW/m 2 are similar to regional. Geochemical analysis of the water samples indicates a meteoric source without any geothermal component. Detailed outcrop-based mapping of fault exposures near the drill site and analysis of image logs from nearby boreholes indicates a history of permeability generation consistent with our predictions. Because the site has low favorability in the Phase 2 model, we consider the results a positive validation of the modeling. Together, the two sites provide a reasonably positive validation of the Phase 2 modeling and should encourage future use of this modeling approach.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

On Alfvénic turbulence of solar wind streams observed by Solar Orbiter during March 2022 perihelion and their source regions

It has been recently accepted that the standard classification of the solar wind solely according to flow speed is outdated, and particular interest has been devoted to the study of the origin and evolution of so-called Alfvénic slow solar wind streams and to what extent such streams resemble or differ from fast wind. In March 2022, Solar Orbiter completed its first nominal phase perihelion passage. During this interval, it observed several Alfvénic streams, allowing for characterization of fluctuations in three slow wind intervals (AS1-AS3) and comparison with a fast wind stream (F) at almost the same heliocentric distance. This work makes use of Solar Orbiter plasma parameters from the Solar Wind Analyzer (SWA) and magnetic field measurements from the magnetometer (MAG). The magnetic connectivity to the solar sources of selected solar wind intervals was reconstructed using a ballistic extrapolation based on measured solar wind speed down to the (spherical) source surface at 2.5 R s below which a potential field extrapolation was used to map back to the Sun. The source regions were identified using SDO/AIA observations. A spectral analysis of in situ measured magnetic field and velocity fluctuations was performed to characterize correlations, Alfvénicity, normalized cross-helicity, and residual energy in the frequency domain as well as intermittency of the fluctuations and spectral energy transfer rate estimated via mixed third-order moments. A machine learning technique was used to separate proton core, proton beam, and alpha particles and to study v − b correlations for the different ion populations in order to evaluate the role played by each population in determining the Alfvénic content of solar wind fluctuations. The comparison between fast wind and Alfvénic slow wind intervals highlights the differences between the two solar wind regimes: The fast wind is characterized by larger amplitude fluctuations, and magnetic and velocity fluctuations are closer to equipartition of energy. In fact the Alfvénic slow wind streams appear to be on a spectrum of wind types, with AS1, originating from open field lines neighboring active regions and displaying similarities with the fast wind in terms of fluctuation amplitude and turbulence characteristics, but not with respect to the alpha particles and proton beams. The other two slow streams differed both in their sources as well as plasma characteristics, with AS2 coming from the expansion of a narrow coronal hole corridor and AS3 from a region straddling a pseudostreamer. The latter displayed the coldest and highest density but the slowest stream with the smallest fluctuation amplitude and greatest magnetic energy excess. It also showed the largest scatter in proton beam speeds and the greatest difference in speed between proton beam and alpha particles. This study shows how the old fast–slow solar wind dichotomy, already called into question by the observations of slower Alfvénic solar wind streams, should further be refined, as the Alfvénic slow wind, originating in different solar wind regions, show significant differences in density, temperature, and proton and alpha-particle properties in the inner heliosphere. The observations presented here provide the starting point for a better understanding of the origin and evolution of different solar wind streams as well as the evolving turbulence contained within.

magnetohydrodynamics (MHD)↗
DOE OSTI2024

Monitoring spatiotemporal evolution of fractures during hydraulic stimulations at the first EGS collab testbed using anisotropic elastic-waveform inversion

The EGS Collab project acquired continuous active-source seismic monitoring (CASSM) data before, during, and after hydraulic stimulations at the first testbed at the depth of 4850 ft (1478 m) at the Sanford Underground Research Facility in Lead, South Dakota, for monitoring fracture creation and evolution. CASSM acquisition was conducted using 24 hydrophones, 18 accelerometers, and 17 piezoelectric sources within four fracture-parallel wells and two orthogonal wells. 3D anisotropic traveltime tomography and anisotropic elastic-waveform inversion of the campaign cross-borehole seismic data show that the rock within the stimulation region is a heterogeneous horizontal transverse isotropic medium. Here we use these inversion results as the initial models and apply 3D anisotropic first-arrival traveltime tomography and 3D anisotropic elastic-waveform inversion to the CASSM data acquired after each stimulation in May, 2018 and December, 2018. We observe the spatiotemporal evolution of seismic velocities and anisotropic parameters caused by hydraulic fracture stimulations, showing the regions of rock alternation caused by hydraulic fracture stimulation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Cross-correlating radial peculiar velocities and CMB lensing convergence

We study, for the first time, the cross correlation between the angular distribution of radial peculiar velocities (PV) and the lensing convergence of cosmic microwave background (CMB) photons. We derive theoretical expectations for the signal and its covariance and assess its detectability with existing and forthcoming surveys. We find that such cross-correlations are expected to improve constraints on different gravitational models by partially breaking degeneracies with the matter density. We identify in the distance-scaling dispersion of the peculiar velocities the most relevant source of noise in the cross correlation. For this reason, we also study how the above picture changes assuming a redshift-independent scatter for the PV, obtained for example using a reconstruction technique. Our results show that the cross correlation might be detected in the near future combining PV measurements from DESI and the convergence map from CMB-S4. Using realistic direct PV measurements we predict a cumulative signal-to-noise ratio of approximately 3.8σ using data on angular scales 3 ≤ ℓ ≤ 200. For an idealized reconstructed peculiar velocity map extending up to redshift z = 0.15 and a smoothing scale of 4 Mpc h -1 we predict a cumulative signal-to-noise ratio of approximately 27σ from angular scales 3 ≤ ℓ ≤ 200. We conclude that currently reconstructed peculiar velocities have more constraining power than directly observed ones, even though they are more cosmological-model dependent.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Knowledge-guided graph machine learning for spatially distributed prediction of daily discharge and nitrogen export dynamics

Spatially distributed prediction of streamflow and nitrogen export dynamics is essential for precision management of agricultural watersheds. While temporal deep learning models such as Long Short-Term Memory (LSTM) have shown strong performance at basin scales, their ability to generalize spatially is limited by insufficient representation of spatial dependencies and flow paths, particularly under data-scarce conditions. To address this gap, we propose HydroGraphNet, a knowledge-guided graph machine learning framework that integrates process-based knowledge and explicit spatial learning into temporal modeling. This framework incorporates directed graph topology to encode watershed connectivity and upstream inflows, with mass balance constraints to improve physical consistency. To enhance generalization in sparsely monitored regions, HydroGraphNet is pretrained on synthetic data generated by the SWAT+ (Soil and Water Assessment Tool Plus) model. We evaluated HydroGraphNet in the Upper Sangamon River Basin (44 HUC-12 subwatersheds, 2001–2020) against two LSTM baselines: a lumped basin-level model and a distributed variant. When benchmarked on SWAT+ simulations in pretraining, HydroGraphNet improved test NSEs by 8.9% (discharge) and 13.7% (NO₃–N load) in temporal extrapolation, and by 27.1% and 34.7% in spatial extrapolation, relative to the Lumped LSTM baseline. After fine-tuning with USGS monitoring data, the model achieved mean test NSE (KGE) scores of 0.768 (0.861) for discharge and 0.626 (0.664) for NO₃–N load, substantially outperforming baselines. Attribution analysis further highlighted the importance of upstream inflow representation and graph-based spatial learning in capturing cross-subwatershed dependencies. The model also reproduced seasonal hydrological and biogeochemical patterns consistent with known processes, demonstrating its robustness and process fidelity for spatially distributed prediction. Altogether, HydroGraphNet advances the integration of physical knowledge and spatially explicit learning in hydrological modeling, offering a generalizable framework for distributed modeling to support spatially targeted water quality management in data-scarce watersheds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Spin-orbit-proximitized ferromagnetic metal by monolayer transition metal dichalcogenide: Atlas of spectral functions, spin textures, and spin-orbit torques in Co/MoSe 2 , Co/WSe 2 and Co/TaSe 2 heterostructures

In this work, the heterostructures composed of an ultrathin ferromagnetic metal (FM) and a material hosting strong spin-orbit (SO) coupling are the principal resource for SO torque and spin-to-charge conversion nonequilibrium effects in spintronics. The key quantity in theoretical description of these effects is nonequilibrium spin density, which can appear on any monolayer of the heterostructure through which the current is flowing as long as the monolayer bands are affected by the native or proximity induced SO coupling. Here we demonstrate how hybridization of wave functions of Co layer and a monolayer of transition metal dichalcogenides (TMDs)—such as semiconducting MoSe 2 and WSe 2 or metallic TaSe 2 —can lead to dramatic transmutation of electronic and spin structure of Co within some distance away from its interface with TMD, when compared to the bulk of Co or its surface in contact with a vacuum. This is due to proximity induced SO splitting of Co bands encoded in the spectral functions and spin textures on its monolayers, which we obtain using noncollinear density functional theory (ncDFT) combined with equilibrium Green function (GF) calculations. In fact, SO splitting is present due to structural inversion asymmetry of the bilayer—i.e., just the presence of the interface—even if SO coupling within TMD monolayer is artificially switched off in ncDFT calculations. However, switching it on makes the effects associated with proximity SO coupling within Co layer about five times larger. Injecting spin-unpolarized charge current through SO-proximitized monolayers of Co generates nonequilibrium spin density over them, so that its cross product with the magnetization of Co determines SO torque. The SO torque computed via first-principles quantum transport methodology, which combines ncDFT with nonequilibrium GF calculations, can be used as the screening parameter to identify optimal combination of materials and their interfaces for applications in spintronics. In particular, we identify heterostructure two-monolayer-Co/monolayer-WSe 2 as the most optimal one, at least in the clean limit.

2-dimensional systems↗
DOE OSTI2023

Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting adjacent to an operating geothermal power station in north-central Nevada and is designed to deliver an uplift in high-temperature geothermal flow rates to increase the power capacity at the facility. The project involved drilling a first-of-a-kind EGS horizontal doublet well system consisting of an injection and production well pair within a high-temperature hard-rock geothermal formation. The lithology of the target reservoir is characterized as a mixed metasedimentary and igneous formation, comprised of phyllite, quartzite, diorite, and granodiorite, representative of the geology across the most prospective geothermal areas throughout the western US. This work included a 16-stage plug-and-perforate stimulation treatment which was the first of its kind in a high-temperature mixed metasedimentary and granitic formation in a fully horizontal doublet geothermal well.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Understanding and controlling capsule symmetry in near vacuum hohlraums at the National Ignition Facility

The near vacuum hohlraum platform is an inertial confinement fusion design at the National Ignition Facility (NIF) that uses the lowest practical density of helium gas of 30 μg/cc to fill the hohlraum, which is ten times lower than now used routinely. This has several advantages, such as high laser coupling; however, the inability to understand and simulate the symmetry of the imploded capsule has limited the use of this platform. This work presents the first simulations that are able to accurately capture the highly prolate implosion seen experimentally without unphysical, ad hoc model changes. While previous investigations attributed this asymmetry to multi-species interpenetration in the hohlraum, we find that this alone has little effect on symmetry. Instead, it is the presence of crossed-beam energy transfer (CBET), occurring with no applied wavelength shift between the laser beams, that increases the laser power to the inner cones and causes a more prolate implosion. The effect of CBET is increased in the simulation model when the hohlraum laser entrance hole hardware is included. Using this understanding, CBET is exploited by shifting the inner-beam wavelength by –0.75 Å (at 1ω) with respect to the outer-beams. This transfers laser power to the outer-beams in contrast to positive wavelength shifts as done routinely on NIF and produces a round capsule implosion in our simulations. Furthermore, this work shows the possibility of the near vacuum hohlraum as a viable experimental platform.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Design and Modeling of an Open-Source Baseline Floating Marine Turbine: Preprint

Marine energy resources such as river, tidal, and ocean currents can provide abundant, predictable, and clean power to both densely populated and remote communities globally. However, marine turbine technologies are still in an early stage of development. Recently, features have been added to the National Renewable Energy Laboratory's open-source wind turbine modeling tool OpenFAST to support the simulation of axial-flow marine turbines. These new features enable marine energy developers to predict the performance and safety of their turbines and allow researchers and students to advance the field through the exploration of novel designs. Developing and demonstrating the new capabilities of OpenFAST for marine turbines requires a baseline design that can be used as an example and test case. There are limited open-source turbine models suitable for this purpose. One existing baseline design is the Reference Model 1 (RM1), a fixed-bottom, dual-rotor marine turbine that was published in 2014 as part of the Department of Energy's Water Power Reference Model Project. To test and demonstrate OpenFAST's ability to model floating marine turbines, several modifications were made to the RM1. A floating platform and mooring system were designed to support a single RM1 rotor in a wide range of possible current and wave conditions. The system and model are intended to be a stable reference case and starting point for research efforts. The platform features all cylindrical members and familiar design elements from the offshore wind industry; the mooring system uses simple catenary chains. While not optimized for the lowest platform cost, the design is understandable and robust and can serve as a baseline for floating marine turbine technologies. This is a useful starting point for studies to explore new technologies or design methodologies. Additionally, the floating RM1 design enables cross-collaboration among industry, academia, and national lab researchers and serves as an educational platform for newcomers to marine energy. This short paper presents the specifications of the turbine, including its floating support structure and mooring system. The rationale behind the selection of certain design parameters is described. To enable adoption of this baseline case for research and educational efforts, an OpenFAST model of the full system has been made publicly available at https://github.com/OpenFAST/r-test/tree/main/glue-codes/openfast/MHK_RM1_Floating.

floating↗
DOE OSTI2025

Low-metallicity Nova Explosions: A Site for Weak rp -process Nucleosynthesis

Classical novae are common cataclysmic events involving a binary system of a white dwarf and a main-sequence or red giant companion star. In metal-poor environments, these explosions produce ejecta differently from their solar counterparts due to the accretion of subsolar-metallicity material onto the white dwarf. In particular, it has been suggested that the nucleosynthesis flow in such low-metallicity nova explosions extends up to the Cu–Zn region, much beyond the expected endpoint, around Ca, predicted for solar-metallicity classical novae. This behavior resembles a weak rp-process, and such nuclear activity has never been observed in accreting white dwarf binaries with typical accretion flows. In this work, we study the characteristics of the weak rp-process for four nova models with metallicities Z = 2 × 10 −9 , 10 −7 , 2 × 10 −6 , and 2 × 10 −5 , and explore the impact of the nuclear physics uncertainties via a Monte Carlo sensitivity study. We identify nuclear reactions whose uncertainties affect the production of intermediate-mass nuclei under these conditions. These reactions and relevant nuclear quantities are targets for measurements at stable or radioactive beam facilities to reduce their rate uncertainties.

Classical novae↗
DOE OSTI2022

Estimation of the NiCu Cycle Strength and Its Impact on Type I X-Ray Bursts

Abstract Type I X-ray bursts (XRBs) are powered by thermonuclear burning on proton-rich unstable nuclides. The construction of burst models with accurate knowledge of nuclear physics is required to properly interpret burst observations. Numerous studies that have investigated the sensitivities of burst models to nuclear inputs have commonly extracted the strength of the NiCu cycle in the rp process, determined by the 59 Cu( p , α ) 56 Ni and 59 Cu( p , γ ) 60 Zn thermonuclear reaction rates, as critical in the determination of reaction flow in the burst. In this study, the strength of the cycle at the XRB temperature range was estimated based on published experimental data. The nuclear properties of the compound nucleus 60 Zn were evaluated for the 59 Cu( p , α ) 56 Ni and 59 Cu( p , γ ) 60 Zn reaction rate calculations. Monte Carlo rate calculations were conducted to include the large uncertainties of nuclear properties in the calculations. In the current work, a weak NiCu cycle is expected, whereas the rates adopted by the previous studies suggest a strong NiCu cycle. Model simulations were performed with the new rates to assess the impact on Type I XRBs. The results show that the estimated cycle strength does not strongly influence the model predictions of the burst light curve or synthesized abundances.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Simulating Discharge Curves of an All-Aqueous TRAB to Identify Pathways for Improving System Performance

Thermally regenerative ammonia batteries (TRABs) are an emerging technology that use low temperature heat (T < 150 °C) to recharge a flow battery that produces electrical power on demand. The all-aqueous copper TRAB can provide high power densities and thermal energy efficiencies relative to other devices that harvest energy from waste heat, but its performance is adversely impacted by the crossover of undesired species through the membrane and lower cell voltages compared to conventional batteries. In this work, we developed a numerical model to simulate discharge curves while accounting for crossover inefficiencies without tracking all electrolyte species through the membrane. The model was able to successfully reproduce discharge curves across a diverse range of battery conditions using a single fitting parameter to account for decay of electrode standard potential due to species crossover with minimal error (< 5%). The model was then used to simulate different design scenarios to estimate changes in energy output from alterations to the aspects of the battery electrolyte chemistry. Results from this study are used to identify pathways for improving future TRAB designs with respect to energy capacity and cost-effectiveness of the technology.

25 ENERGY STORAGE↗
DOE OSTI2025

Near Resonance between the Shelf Ocean and Semidiurnal Atmospheric Tidal Winds

This manuscript illustrates the resonance between continental shelf oceans and the semidiurnal atmospheric tidal wind, explaining O(10 −2 ) m semidiurnal sea surface height (SSH) variations in detided datasets. The resonance, similar to amplification of semidiurnal oceanic tides on the gentle and wide shelf, results in pronounced, offshore-attenuated standing waves on the shelf which is driven by the cross-shore pressure gradient force, Coriolis force, and the rotary wind stress. Observations and numerical results from the Texas–Louisiana shelf confirm this mechanism, where a significant presence of the semidiurnal tidal wind couples with O(10 −1 ) m s −1 ocean currents, influencing SSH distribution and sustaining the wave structure. The consistency of the interaction and momentum budgets with the analytical solution suggests the robustness of the semidiurnal atmospheric tidal wind interacting with the shelf ocean. Notably, these findings suggest that similar resonances could occur on other gentle shelves known for enhancing semidiurnal oceanic tides and contribute 3%–10% of the wind work.

Atmosphere-ocean interaction↗