Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Complex solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Come for predictions, stay for complexity: synthesis and experimental probing of ionic conductivity in Li 9 B 19 S 33

Lithium thioborates, despite their potential cost-effectiveness and low density, have received considerably less attention as solid electrolytes compared to their thiophosphate counterparts. A primary obstacle to their widespread investigation has been the inherent challenge in synthesizing single-phase materials. Computational studies have predicted several lithium thioborate phases exhibiting high ionic conductivity, with Li 9 B 19 S 33 notably predicted to reach 80 mS cm −1 . However, experimental validation of these theoretical predictions remains absent. This work addresses this gap by detailing a successful synthesis of the previously elusive Li 9 B 19 S 33 phase, facilitated by in situ temperature dependent powder X-ray diffraction. Our findings reveal the peritectic nature of phase formation, necessitating an excess of boron sulfide in the reaction mixture. We further present a comprehensive structural characterization of Li 9 B 19 S 33 utilizing spectroscopic techniques like NMR, FT-IR, and diffuse reflectance and report on its ionic conductivity. Solid-state 6 Li NMR line narrowing experiments revealed an ion mobility activation energy of 0.26 eV whereas activation energies derived from impedance spectroscopy measurements were significantly higher, resulting in lower than theoretically predicted ionic conductivity.

Oppong, Richeal A. [Iowa State Univ., Ames, IA (Un↗
DOE OSTI2023

Structure–transport correlations in Na 11 Sn 2 SbSe 12 and its sulfide solid solutions

We report a new ion conductor—Na 11 Sn 2 SbSe 12 —as a possible candidate for a solid catholyte in composite cathodes for all-solid state Na-batteries, which exhibits a room temperature ionic conductivity of 0.15 ± 0.03 mS cm −1 and an activation energy of 0.39 ± 0.02 eV. The sulfide solid solutions of Na 11 Sn 2 SbSe 12 , namely, Na 11 Sn 2 SbS 12−x Se x (x = 1 and 6), were also investigated through a combination of Rietveld refinement against powder x-ray diffraction data and electrochemical impedance spectroscopy to reveal the complex structure–property relationships governing ion transport in this class of materials. Meanwhile, broadening of the Na-ion diffusion pathways in Na 11 Sn 2 SbSe 12 is expected to facilitate Na-ion transport compared to the sulfide-rich member of the solid solution, the opposite holds: increasing the Se fraction in Na 11 Sn 2 SbS 12−x Se x leads to a little change in the activation energy but a reduction in the ionic conductivity. We ascribe this to the lowering of the prefactor, σ 0 , in the Arrhenius relationship with increasing lattice “softening” as a function of higher Se content.

Ramos, Erika P.↗
DOE OSTI2021

Atomic-Level Features for Kinetic Monte Carlo Models of Complex Chemistry from Molecular Dynamics Simulations

The high computational cost of evaluating atomic interactions recently motivated the development of computationally inexpensive kinetic models, which can be parametrized from MD simulations of complex chemistry of thousands of species or other processes and accelerate the prediction of the chemical evolution by up to four order of magnitude. Such models go beyond the commonly employed potential energy surface fitting methods in that they are aimed purely at describing kinetic effects. So far, such kinetic models utilize molecular descriptions of reactions and have been constrained to only reproduce molecules previously observed in MD simulations. Therefore, these descriptions fail to predict the reactivity of unobserved molecules, for example in the case of large molecules or solids. In this work, we propose a new approach for the extraction of reaction mechanisms and reaction rates from MD simulations, namely the use of atomic-level features. Using the complex chemical network of hydrocarbon pyrolysis as example, it is demonstrated that kinetic models built using atomic features are able to explore chemical reaction pathways never observed in the MD simulations used to parametrize them, a critical feature to describe rare events. Atomic-level features are shown to construct reaction mechanisms and estimate reaction rates of unknown molecular species from elementary atomic events. Through comparisons of the model ability to extrapolate to longer simulation timescales and different chemical compositions than the ones used for parameterization, it is demonstrated that kinetic models employing atomic features retain the same level of accuracy and transferability as the use of features based on molecular species, while being more compact and parametrized with less data. We also find that atomic features can better describe the formation of large molecules enabling the simultaneous description of small molecules and condensed phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Personal Journey in Nanoscience via Developing and Applying Liquid Phase TEM

Liquid phase TEM has attracted widespread attention in recent years as a groundbreaking tool to address various fundamental problems in nanoscience. It has provided the opportunity to reveal many unseen dynamic phenomena of nanoscale materials in solution processes by direct imaging through liquids with high spatial and temporal resolution. After my earlier work on real-time imaging of the nucleation, growth, and dynamic motion of nanoparticles in liquids by developing high-resolution liquid phase transmission electron microscopy (TEM) down to the sub-nanometer level, I established my own research group at Lawrence Berkeley National Lab in 2010. My group focuses on developing and applying liquid phase TEM to investigate complex systems and reactions. We have studied a set of scientific problems centered on understanding how atomic level heterogeneity and fluctuations at solid-liquid interfaces impact nanoscale materials transformations using advanced liquid phase TEM. This article describes my personal journey in nanoscience, highlighting the main discoveries of my research group using liquid phase TEM as a unique tool. Some perspectives on the impacts of liquid phase TEM and the future opportunities in nanoscience and nanotechnology enabled by liquid phase TEM are also included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In Situ Imaging of Faujasite Surface Growth Reveals Unique Pathways of Zeolite Crystallization

Zeolite crystallization occurs by complex processes involving a variety of possible mechanisms. The sol gel media used to prepare zeolites leads to heterogeneous mixtures of solution and solid states with diverse solute species. At later stages of zeolite synthesis when growth occurs predominantly from solution, classical two-dimensional nucleation and spreading of layers on crystal surfaces via the addition of soluble species is the dominant pathway. At earlier stages, these processes occur in parallel with nonclassical pathways involving crystallization by particle attachment (CPA). The relative roles of solution- and solid-state species in zeolite crystallization have been a subject of debate. Here, in this work, we investigate the growth mechanism of a commercially relevant zeolite, faujasite (FAU). In situ atomic force microscopy (AFM) measurements reveal that supernatant solutions extracted from a conventional FAU synthesis at various times do not result in growth, indicating that FAU growth predominantly occurs from the solid state through a disorder-to-order transition of amorphous precursors. Elemental analysis shows that supernatant solutions are significantly more siliceous than both the original growth mixture and the FAU zeolite product; however, in situ AFM studies using a dilute clear solution with a lower Si/Al ratio revealed three-dimensional growth of surfaces that is distinct from layer-by-layer and CPA pathways. This unique mechanism of growth differs from those observed in studies of other zeolites. Given that relatively few zeolite frameworks have been the subject of mechanistic investigation by in situ techniques, these observations of FAU crystallization raise the question whether its growth pathway is characteristic of other zeolite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Topological electride phase of sodium at high pressures and temperatures

Sodium, a textbook example of a nearly-free-electron metal, exhibits unforeseen pressure-induced behavior including the stabilization of numerous polymorphs—some possessing extremely complex unit cells—as well as a metal-to-insulator transition to the iconic hP4 phase. However, until recently, most of the experimental and theoretical studies on solid sodium have been restricted to the low-temperature regime. In this work, using ab initio evolutionary structure searches coupled with quasiharmonic calculations, we discover seven new phases of sodium that are more stable than the known hP4 phase at pressure-temperature conditions that were recently attained in ramp-compression experiments. From these, our calculations suggest that P6 3 /m Na is the ground state between ≈250 GPa at 710 K and ≈350 GPa at 1900 K. Electronic structure calculations show that this phase is a topological semimetal with a Dirac nodal surface that is protected by a nonsymmorphic symmetry S 2z and an electride owing to its non-nuclear charge localized within one-dimensional honeycomb channels and zero-dimensional cages. Our results highlight the complexity of dense sodium's free-energy landscape and intricate electronic structure that emerges at finite temperatures and conditions where ionic cores overlap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Solvothermal synthesis and solid-state characterization of metal-metal bonded tetracarboxylatoditechnetium(II,III) polymers

Investigations of solvothermal reactions with pertechnetate, [TcO 4 ] - , have produced four new low-valent Tc extended metal atom chain (EMAC) complexes with multiple metal-metal bonds. The thermal reaction of potassium pertechnetate with glacial acetic acid, under in-situ hydrogen production from the decomposition of sodium borohydride, yields purple elongated crystals determined to be tetraacetato ditechnetium (II,III) acetate (1), [Tc 2 (O 2 CCH 3 ) 4 (μ-O 2 CCH 3 ] n . Compound 1 was characterized by single crystal X-ray diffraction and its magnetic properties recorded between 10 and 300 K. Single crystal X-ray diffraction analysis of 1 indicates the Tc 2 +5 tetraacetato unit is linked by the carboxylate oxygens of the bridging acetate, similar to known chloride and bromide linkage polymers of composition [Tc 2 (μ-O 2 CCH 3 ) 4 Cl] n , and [Tc 2 (μ-O 2 CCH 3 ) 4 Br] n . Here, using the same synthetic method three similar compounds have been synthesized from propionic, benzoic and pivalic acid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Heterolytic Scission of Hydrogen Within a Crystalline Frustrated Lewis Pair

We report the heterolysis of molecular hydrogen under ambient conditions by the crystalline frustrated Lewis pair (FLP) 1-{2-[bis(pentafluorophenyl)boryl]phenyl}-2,2,6,6-tetramethylpiperidine (KCAT). The gas–solid reaction provides an approach to prepare the solvent-free, polycrystalline ion pair KCATH2 through a single crystal to single crystal transformation. The crystal lattice of KCATH2 increases in size relative to the parent KCAT by approximately 2%. Microscopy was used to follow the transformation of the highly colored red/orange KCAT to the colorless KCATH2 over a period of 2 h at 300 K under a flow of H2 gas. There is no evidence of crystal decrepitation during hydrogen uptake. Inelastic neutron scattering employed over a temperature range from 4–200 K did not provide evidence for the formation of polarized H2 in a precursor complex within the crystal at low temperatures and high pressures. However, at 300 K, the INS spectrum of KCAT transformed to the INS spectrum of KCATH2. Calculations suggest that the driving force is more favorable in the solid state compared to the solution or gas phase, but the addition of H2 into the KCAT crystal is unfavorable. Ab Initio methods were used to calculate the INS spectra of KCAT, KCATH2, and a possible precursor complex of H2 in the pocket between the B and N of crystalline KCAT. Ex-situ NMR showed that the transformation from KCAT to KCATH2 is quantitative and our results suggest that the hydrogen heterolysis process occurs via H2 diffusion into the FLP crystal with a rate-limiting movement of H2 from inactive positions to reactive sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and Characterization of Homoleptic Rare Earth Nitrato Complexes with the Quaternary Ammonium Cations Et 4 N + and n Pr 4 N +

Two periodic series of homoleptic rare earth nitrato com plexes, [R 4 N] x [M(NO 3 ) y ](M = La-Nd, Sm-Lu, Y); R = Et, $n$ Pr; x = 2-3; y = 5-6) have been synthesized, and charac terized by single crystal X-ray diffraction, IR and Raman spectroscopy, comparing the solid state speciation of the nitrate ions as a function of lanthanide ion and quarternary ammonium cation. The series of the form [Et 4 N] 3 [Ln(NO 3 ) 6 ] crystallizes in the rhombohedral space group $R$$\bar{3}$, as a twelve-coordinate hexanitrato complex [Et 4 N] 3 [Ln(NO 3 ) 6 ] with cocrystallized HNO 3 for La, Pr, and Nd. For Ce, a distinct orthorhombic phase retaining the same formula, [Et 4 N] 3 [Ce(NO 3 ) 6 ] is isolated in the absence of HNO 3 to prevent oxidation of the Ce(III) to Ce(IV) in nitric acid. A ten-coordinate pentanitrato complex, [Et 4 N] 2 [Ln(NO 3 ) 5 ], in monoclinic symmetry forms for the remainder of the series, and for Y(III). The entire series crystallized in the presence of [ $n$ Pr 4 N] + counterions forms a pentanitrato complex [ $n$ Pr 4 N] 2 [M(NO 3 ) 5 ] in the orthorhombic space group, $Pccn$. In conclusion, analysis of trends in the structural and spectroscopic characteristics of these series reveal insight into the structure directing influences of both the lanthanide contraction and the quarternary ammonium cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Disorder-Induced Suppression of Superconductivity in Infinite-Layer Nickelates

The pairing symmetry of superconducting infinite-layer nickelates is a fundamental yet experimentally challenging question. We employ high-energy electron irradiation to induce disorder in superconducting Nd 0.825 ⁢Sr 0.175 ⁢NiO 2 thin films, examine the impact of pair-breaking defects on superconductivity, and elucidate the nature of the superconducting gap. Our measurements reveal a complete suppression of superconductivity with increasing disorder, suggesting an unconventional, sign-changing order parameter.

Ranna, Abhishek [Max Planck Society, Dresden (Germ↗
DOE OSTI2024

Supramolecular Metal Halide Complexes for High-Temperature Nonlinear Optical Switches

Nonlinear optical (NLO) switching materials, which exhibit reversible intensity modulation in response to thermal stimuli, have found extensive applications across diverse fields, including sensing, photoelectronics, and photonic applications. While significant progress has been made in solid-state NLO switching materials, these materials typically showcase their highest NLO performance near room temperature. However, this performance drastically deteriorates upon heating, primarily due to the phase transition undergone by the materials from non-centrosymmetric to centrosymmetric phase. Here, we introduce a new class of NLO switching materials, solid-state supramolecular compounds 18-Crown-6 ether@Cu 2 Cl 4 ·4H 2 O (1·4H 2 O), exhibiting reversible and stable NLO switching when subjected to near-infrared (NIR) photoexcitation and/or thermal stimuli. The reversible crystal structure in response to external stimuli is attributed to the presence of a weakly coordinated bridging water molecule, facilitated by hydrogen bonding/chelation interactions between the metal halide and crown-ether supramolecules. We observed an exceptionally high second-harmonic generation (SHG) signal under continuous photoexcitation, even at temperatures exceeding 110°C. In addition, the bridging water molecules within the complex can be released and recaptured in a fully reversible manner, all without requiring excessive energy input. This feature allows for precise control of SHG signal activation and deactivation through structural transformations, resulting in a high-contrast off/on ratio, reaching values in the million-fold range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Certifying the Performance of Fixative Technologies under Open Air Demolition Activities for D and D - 20096

Department of Energy (DOE) facilities undergoing deactivation and decommissioning (D and D) activities struggle with safety concerns of residual radioactive contamination leftover after gross decontamination efforts have concluded. The positive effects of implementing fixative technologies for decommissioning and maintenance is known across the DOE complex. However, there is no standardized metric in place that quantifies the performance of these technologies such as incombustible fixative platforms that immobilize the contamination in a solid polymer material under normal operating conditions or when exposed to stressors. The primary focus of this research is to provide the empirical data necessary to properly characterize the effects of implementing fixative technologies on mitigating the release of contamination. In addition, this effort has been used to identify and establish uniform testing protocols to quantify operational parameters of fixating platforms and properly credit such systems under a variety of operational conditions and stressors that can arise during open air demolition efforts (e.g. impact, water, thermal, etc.). The established protocols will be provided to the ASTM International E10.03 Subcommittee on Radiological Protection for Decontamination and Decommissioning of Nuclear Facilities and Components for the potential of formal standardization. Attributes to be addressed during testing are material compromise from impact stress, thermal stress for incombustible fixative materials, and immobilization factors (how well an immobilizing platform is capable of retaining fixated material during thermal and impact stressors). In developing these test methods, a greater understanding of the material's behavior under anticipated and unanticipated events, such as decommissioning activities and contingency events as outlined in the Basis of Interim Operations (BIO), can be successfully characterized. There are several key components of the experimental methodology that is essential in empirically certifying fixative technologies. A surrogate contaminant with a unique signature has been utilized with the implementation of a uniform contamination process of test coupons that is quantifiable and replicable for direct fixative comparisons. A modular test chamber has also been used to apply the various stressors of interest. Collection of released contamination that includes airborne and resettled contaminant particles and analyzed using mass spectrometry. This research directly supports DOE complex-wide concerns in terms of final disposition of nuclear facilities and the considerations made during their time between ceasing facility operation and final disposition. The results of this effort aims to provide a standardized road map and logical decision flow to better facilitate fixative technologies into D and D activities required to achieve the desired facility end state. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Additive manufacturing of LiNi 1/3 Mn 1/3 Co 1/3 O 2 battery electrode material via vat photopolymerization precursor approach

Additive manufacturing, also called 3D printing, has the potential to enable the development of flexible, wearable and customizable batteries of any shape, maximizing energy storage while also reducing dead-weight and volume. In this work, for the first time, three-dimensional complex electrode structures of high-energy density LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC 111) material are developed by means of a vat photopolymerization (VPP) process combined with an innovative precursor approach. This innovative approach involves the solubilization of metal precursor salts into a UV-photopolymerizable resin, so that detrimental light scattering and increased viscosity are minimized, followed by the in-situ synthesis of NMC 111 during thermal post-processing of the printed item. The absence of solid particles within the initial resin allows the production of smaller printed features that are crucial for 3D battery design. The formulation of the UV-photopolymerizable composite resin and 3D printing of complex structures, followed by an optimization of the thermal post-processing yielding NMC 111 is thoroughly described in this study. Based on these results, this work addresses one of the key aspects for 3D printed batteries via a precursor approach: the need for a compromise between electrochemical and mechanical performance in order to obtain fully functional 3D printed electrodes. In addition, it discusses the gaps that limit the multi-material 3D printing of batteries via the VPP process.

25 ENERGY STORAGE↗
DOE OSTI2025

Soft X-ray Emission Spectroscopy of Phosphorus Compounds for Energy Conversion and Storage

Phosphorus (P) is a ubiquitous component of materials for energy conversion and storage. Despite the effectiveness of soft X-ray emission spectroscopy (XES) to characterize these complex materials, XES studies of P-containing compounds are still largely missing. In this investigation, the electronic structure and XES signatures from the P L 2,3 -edge are probed for nine solid-state P-containing compounds characterized by various oxidation states and chemical environments: GaP (3−) , InP (3−) , red-P (0) , H 3 P (3+) O 3 , Na 2 H 2 P 2 (4+) O 6 , H 3 P (5+) O 4 , KH 2 P (5+) O 4 , Na 2 HP (5+) O 4 , and InP (5+) O 4 . The XES spectrum of each material exhibits distinct spectral fingerprints, which provide a robust basis for the speciation of complex P-containing samples. Density functional theory calculations shed light on the electronic structure of selected materials and particularly on the effect of phosphorus-oxygen hybridization. This study provides a comprehensive understanding of P L 2,3 XES spectral fingerprints across a wide range of oxidation states and chemical environments. These data sets and insights pave the way for dedicated future work, such as in situ and operando investigations of P-containing compounds in energy-related applications, where speciation of P compounds is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Adsorbed Carboxylates on the Dissolution of Boehmite Nanoplates in Highly Alkaline Solutions

Understanding the dissolution of boehmite in highly alkaline solutions is important to the processing of the complex nuclear wastes stored at the Hanford (WA) and Savannah River (SC) sites. Here, we report the adsorption of model carboxylate anions on boehmite nanoplates in alkaline solutions and their effects on subsequent boehmite dissolution in 3 M NaOH at 80 °C. Although expectedly lower than at circumneutral pH, adsorption of oxalate at pH 13 at room temperature was significant and remained so through a linear decrease to 3 M NaOH conditions with no evidence for the appearance of new phases. Modeling of the adsorption data and rate were consistent with the formation of outer-sphere surface complexes. By using these conditions to preload the boehmite nanoplates with oxalate, and separately acetate, we measured and compared their dissolution behavior at 80 °C and observed a clear suppression of the dissolution rate for the case of adsorbed oxalate by 23% and for adsorbed acetate by 10% compared to pure solids. Ex situ scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterization revealed no detectable difference in the morphologic evolution of the dissolving boehmite materials. In conclusion, we nonetheless conclude that pre-adsorbed carboxylate anions, even as nominally weakly bound outer-sphere complexes, can persist on the surface through highly alkaline conditions, decreasing the density of dissolution-active sites and thereby adding an extrinsic control on the dissolution rate.

Adsorption kinetics↗
DOE OSTI2026

A fourth order sharp immersed method for the incompressible Navier-Stokes equations with stationary and moving boundaries and interfaces

We propose a fourth order Navier-Stokes solver based on the immersed interface method (IIM), for flow problems with stationary and one-way coupled moving boundaries and interfaces. Our algorithm employs a Runge-Kutta-based projection method that maintains high-order temporal accuracy in both velocity and pressure for steady and unsteady velocity boundary conditions. Fourth order spatial accuracy is achieved through a novel fifth order IIM discretization scheme for the advection term, as well as existing high-order interface-corrected finite difference schemes for the other differential operators. Using a set of manufactured flow problems with stationary and moving boundaries, we demonstrate fourth order convergence of velocity and pressure in the infinity norm, both inside the domain and on the immersed boundaries. The solver’s performance is further validated through a range of practical flow simulations, highlighting its efficiency over a second order scheme. Finally, we showcase the ability of our immersed discretization scheme to handle interface-coupled multiphysics problems by solving a conjugate heat transfer problem with multiple immersed solids. Overall, the proposed approach robustly combines the efficiency of high order discretization schemes with the flexibility of immersed discretizations for flow problems with complex, moving boundaries and interfaces.

42 ENGINEERING↗
DOE OSTI2020

Effect of Bicarbonate, Calcium, and pH on the Reactivity of As(V) and U(VI) Mixtures

Natural or anthropogenic processes can increase the concentration of uranium (U) and arsenic (As) above the maximum contaminant levels in water sources. Bicarbonate and calcium (Ca) can have major impacts on U speciation and can affect the reactivity between U and As. We therefore investigated the reactivity of aqueous U and As mixtures with bicarbonate and Ca for acidic and neutral pH conditions. In experiments performed with 1 mM U and As mixtures, 10 mM Ca, and without added bicarbonate (pCO 2 = 3.5), aqueous U decreased to <0.25 mM at pH 3 and 7. Aqueous As decreased the most at pH 3 (~0.125 mM). Experiments initiated with 0.005 mM As and U showed similar trends. X-ray spectroscopy (i.e., XAS and EDX) and diffraction indicated that U-As-Ca- and U-Ca-bearing solids resemble uranospinite [Ca(UO 2 ) 2 (AsO 4 ) 2 ·10H 2 O] and becquerelite [Ca(UO 2 ) 6 O 4 (OH) 6 ·8(H 2 O)]. These findings suggest that U-As-Ca-bearing solids formed in mixed solutions are stable at pH 3. However, the dissolution of U-As-Ca and U-Ca-bearing solids at pH 7 was observed in reactors containing 10 mM bicarbonate and Ca, suggesting a kinetic reaction of aqueous uranyl-calcium-carbonate complexation. Our study provides new insights regarding U and As mobilization for risk assessment and remediation strategies.

54 ENVIRONMENTAL SCIENCES↗