Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMMAND MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

SIERRA/Aero User Manual (V.4.44)

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

97 MATHEMATICS AND COMPUTING↗

SIERRA/Aero User Manual Version 4.46.

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

97 MATHEMATICS AND COMPUTING↗

SIERRA/Aero User Manual - Version 4.50

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

97 MATHEMATICS AND COMPUTING↗

SIERRA/Aero User Manual - Version 4.48

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SIERRA/Aero User Manual (V. 4.40)

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

42 ENGINEERING↗

SIERRA/Aero User Manual (V.4.42)

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

97 MATHEMATICS AND COMPUTING↗

SIERRA/Aero User Manual - Version 5.8

SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

42 ENGINEERING↗

Generalizable, fast, and accurate DeepQSPR with fastprop

Abstract Quantitative Structure–Property Relationship studies (QSPR), often referred to interchangeably as QSAR, seek to establish a mapping between molecular structure and an arbitrary target property. Historically this was done on a target-by-target basis with new descriptors being devised to specifically map to a given target. Today software packages exist that calculate thousands of these descriptors, enabling general modeling typically with classical and machine learning methods. Also present today are learned representation methods in which deep learning models generate a target-specific representation during training. The former requires less training data and offers improved speed and interpretability while the latter offers excellent generality, while the intersection of the two remains under-explored. This paper introduces , a software package and general Deep-QSPR framework that combines a cogent set of molecular descriptors with deep learning to achieve state-of-the-art performance on datasets ranging from tens to tens of thousands of molecules. provides both a user-friendly Command Line Interface and highly interoperable set of Python modules for the training and deployment of feedforward neural networks for property prediction. This approach yields improvements in speed and interpretability over existing methods while statistically equaling or exceeding their performance across most of the tested benchmarks. is designed with Research Software Engineering best practices and is free and open source, hosted at github.com/jacksonburns/fastprop.

Burns, Jackson W. (ORCID:0000000206579426)↗

Comet rendezvous - The next stage in cometary exploration

NASA's Comet Rendezvous Asteroid Flyby (CRAF) mission to P/Tempel 2 is described with attention given to CRAF spacecraft design. Infrared/visible spectrometers, dust counters, magnetometers, and plasma-wave analyzers are an integral part of the CRAF payload. CRAF's subsystems consist of the following: (1) a structure subsystem, (2) a temperature control subsystem, (3) a propulsion module subsystem, (4) an attitude control subsystem, (5) a command and data subsystem, (6) a radio frequency subsystem, and (7) a power and pyrotechnics subsystem. It is concluded that the CRAF mission will enable the first detailed study of the cometary nucleus.

Collins, D. H.↗

Computerized monitoring and control of experiments in space

The computer subsystem of the Villanova University GAS (Get Away Special) experiment apparatus is discussed. The function of the computer subsystem is to provide data acquisition and control system support to the experiments. The computer subsystem will provide high availability, low power consumption and highly reliable data retention. The general layout of the subsystem provides for redundant processing units, control modules, and multiple data acquisition modules. Each of the two redundant processing units will be composed of a microprocessor, control logic, PROM, RAM, non-volitile memory, timers, self-check logic and data ports to the data acquisition and control modules. One unit will control the experiment while the other shadows the primary unit operation. The data acquisition module gathers data from the experiment. The data is transfered to the processing unit in digital form. The control module validates the data, decodes it and executes the command.

Janisch, Thomas V.↗

Entry Guidance for the Reusable Launch Vehicle

The X-33 Advanced Technology Demonstrator is a half-scale prototype developed to test the key technologies needed for a full-scale single-stage reusable launch vehicle (RLV). The X-33 is a suborbital vehicle that will be launched vertically, and land horizontally. The goals of this research were to develop an alternate entry guidance scheme for the X-33 in parallel to the actual X-33 entry guidance algorithms, provide comparative and complementary study, and identify potential new ways to improve entry guidance performance. Toward these goals, the nominal entry trajectory is defined by a piecewise linear drag-acceleration-versus-energy profile, which is in turn obtained by the solution of a semi-analytical parameter optimization problem. The closed-loop guidance is accomplished by tracking the nominal drag profile with primarily bank-angle modulation on-board. The bank-angle is commanded by a single full-envelope nonlinear trajectory control law. Near the end of the entry flight, the guidance logic is switched to heading control in order to meet strict conditions at the terminal area energy management interface. Two methods, one on ground-track control and the other on heading control, were proposed and examined for this phase of entry guidance where lateral control is emphasized. Trajectory dispersion studies were performed to evaluate the effectiveness of the entry guidance algorithms against a number of uncertainties including those in propulsion system, atmospheric properties, winds, aerodynamics, and propellant loading. Finally, a new trajectory-regulation method is introduced at the end as a promising precision entry guidance method. The guidance principle is very different and preliminary application in X-33 entry guidance simulation showed high precision that is difficult to achieve by existing methods.

Lu, Ping↗

STS-102 Mission Highlight Resource Tape, Tape 3 of 4

A continuation of 'STS-102 Mission Highlight Resource Tape, Part 1 of 2, Tape 1 of 2' (internal ID 2001096942) and 'STS-102 Mission Highlight Resource Tape, Part 1 of 2, Tape 2 of 2' (internal ID 2001096941), this video shows the activities of flight days 6-12 of the STS-102 mission. Various on-orbit activities are seen, such as STS-102 Mission Specialists Andrew Thomas and Paul Richards suiting up and performing their spacewalks, Thomas in the Leonardo Multipurpose Logistics Module preparing for the unloading activities, the change of command from the International Space Station's (ISS's) Expedition 1 crew (William Shepherd, Yuri Gidzenko, and Sergei Krikalev) to the Expedition 2 crew (Yuriy Usachev, James Voss, and Susan Helms), and the undocking of the Discovery Orbiter from the ISS. Activities for flight days 13 and 14 can be found on 'STS-102 Mission Highlight Resource Tape, Part 2 of 2, Tape 2 of 2' (internal ID 2001096940).

Source record↗

STS-104 Flight Day 8 Highlights

Expedition 2 Flight Engineer Jim Voss and STS-104 Commander Steve Lindsey are seen in between the Unity Module and the Quest Airlock in the International Space Station as they replace the intermodular ventilation valve. Footage shows STS-104 Mission Specialist Janet Kavandi and Expedition 2 Flight Engineers Susan Helms and Jim Voss outfitting the Quest Airlock after Voss and Lindsey are finished with the repairs.

Source record↗

Aerocapture as an Option for Ice Giants Mission

Aerocapture is an atmospheric maneuver where the aerodynamic forces of the vehicle (lift and drag) are used to provide the 𝞓V needed to slow down from the approach hyperbolic trajectory to achieve the desired captured orbit around the target planet. The aeroassist capture provides a large savings in propulsion needed to change the velocity of the vehicle, since aerodynamic forces rather than propulsive systems provide the change in velocity. Aerocapture requires an integrated system level design, including thermal protection systems, actuator systems for aerodynamic modulation, and guidance and control systems that can autonomously command the change in the aeroassist forces. Although aerocapture has been proposed for many situations in the past, including Mars, Venus, Titan, Saturn, Uranus, and Neptune orbiters as well as for Earth demonstration missions, it has not been attempted on any missions. However, many studies in the past three decades that have considered aerocapture as a design option have concluded that there are large mass savings that come from using aeroassist forces rather than propulsive forces to put a spacecraft into a captured orbit. The benefits are destination dependent, but some of the largest mass savings occur for the Ice Giants planets. Due to the large hyperbolic velocities of interplanetary trajectories approaching Uranus and Neptune, large amount of propulsion must be used to put a spacecraft in science orbits around these planets. Aerocapture can reduce the propulsion needs by dissipating energy in the sizable atmospheres of Uranus and Neptune. NASA commissioned a detailed study analysis to quantify the benefits, if any, for use at Neptune. The study found that even having to provide a heat shield aerocapture could deliver 40% more payload than an all-propulsive vehicle, and also provides for a 3–4-year reduction in trip time. Mass savings are expected also at Uranus with an aerocapture mission. Additionally, more recent advances in thermal protection systems and guidance and control systems show a path to increase capabilities beyond those results. This paper will discuss the merits of including aerocapture as an option for an Ice Giants mission. The discussion will focus on the cost and mass savings of using aerocapture instead of propulsive burns for Ice Giants orbiter mission scenarios while also detailing a potential concept of operations and entry vehicle design. Finally, the talk will discuss more recent work that shows aerocapture design is possible without the development of any novel entry vehicle. Thus, aerocapture can significantly improve science capabilities for an Ice Giants mission.

Soumyo Dutta↗

WetLab-2: Tools for Conducting On-Orbit Quantitative Real-Time Gene Expression Analysis on ISS

The objective of NASA Ames Research Centers WetLab-2 Project is to place on the ISS a research platform capable of conducting gene expression analysis via quantitative real-time PCR (qRT-PCR) of biological specimens sampled or cultured on orbit. The project has selected a Commercial-Off-The-Shelf (COTS) qRT-PCR system, the Cepheid SmartCycler and will fly it in its COTS configuration. The SmartCycler has a number of advantages including modular design (16 independent PCR modules), low power consumption, rapid ramp times and the ability to detect up to four separate fluorescent channels at one time enabling multiplex assays that can be used for normalization and to study multiple genes of interest in each module. The team is currently working with Cepheid to enable the downlink of data from the ISS to the ground and provide uplink capabilities for programming, commanding, monitoring, and instrument maintenance. The project has adapted commercial technology to design a module that can lyse cells and extract RNA of sufficient quality and quantity for use in qRT-PCR reactions while using a housekeeping gene to normalize RNA concentration and integrity. The WetLab-2 system is capable of processing multiple sample types ranging from microbial cultures to animal tissues dissected on-orbit. The ability to conduct qRT-PCR on-orbit eliminates the confounding effects on gene expression of reentry stresses and shock acting on live cells and organisms or the concern of RNA degradation of fixed samples. The system can be used to validate terrestrial analyses of samples returned from ISS by providing on-orbit gene expression benchmarking prior to sample return. The ability to get on orbit data will provide investigators with the opportunity to adjust experiment parameters for subsequent trials based on the real-time data analysis without need for sample return and re-flight. Researchers will also be able to sample multigenerational changes in organisms. Finally, the system can be used for analysis of air, surface, water, and clinical samples to monitor environmental contaminants and crew health. The verification flight of the instrument is scheduled to launch on SpaceX-7 in June 2015.

quantitative PCR↗

Commanding Constellations (Pipeline Architecture)

Providing ground command software for constellations of spacecraft is a challenging problem. Reliable command delivery requires a feedback loop; for a constellation there will likely be an independent feedback loop for each constellation member. Each command must be sent via the proper Ground Station, which may change from one contact to the next (and may be different for different members). Dynamic configuration of the ground command software is usually required (e.g. directives to configure each member's feedback loop and assign the appropriate Ground Station). For testing purposes, there must be a way to insert command data at any level in the protocol stack. The Pipeline architecture described in this paper can support all these capabilities with a sequence of software modules (the pipeline), and a single self-identifying message format (for all types of command data and configuration directives). The Pipeline architecture is quite simple, yet it can solve some complex problems. The resulting solutions are conceptually simple, and therefore, reliable. They are also modular, and therefore, easy to distribute and extend. We first used the Pipeline architecture to design a CCSDS (Consultative Committee for Space Data Systems) Ground Telecommand system (to command one spacecraft at a time with a fixed Ground Station interface). This pipeline was later extended to include gateways to any of several Ground Stations. The resulting pipeline was then extended to handle a small constellation of spacecraft. The use of the Pipeline architecture allowed us to easily handle the increasing complexity. This paper will describe the Pipeline architecture, show how it was used to solve each of the above commanding situations, and how it can easily be extended to handle larger constellations.

Tim Ray↗

STS-104 Flight Day 11 Highlights

On this 11th day of the STS-104 mission, Expedition 2 crewmembers, Commander Yuriy Usachev and Flight Engineers James Voss and Susan Helms, are seen in the Destiny Laboratory Module as they prepare for the departure of the STS-104 crew. Both the Expedition 2 crew and the STS-104 crew (Commander Steven Lindsey, Pilot Charles Hobaugh, and Mission Specialists Mike Gernhardt, Jim Reilly, and Janet Kavandi) are seen as they say their farewells and the STS-104 crew returns to the Space Shuttle. The undocking of Atlantis is shown and the International Space Station is seen against Earth and space as the orbiter flys around the station. The STS-104 crew answers questions about the mission in an on-orbit interview.

Source record↗

STS-104 Flight Day 6 Highlights

Expedition 2 Flight Engineer Jim Voss is seen opening the hatch between the Unity Module and the Quest Airlock. An on-orbit interview with Expedition 2 Commander Yuriy Usachev and STS-104 Commander Steve Lindsey and Mission Specialist Charlie Hobaugh is shown as they answer questions about some problems with a previous spacewalk. As exterior shots of the International Space Station are seen, the air leak in the Unity Modules node pressure valve is described.

Source record↗