Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-pressure CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes

CO 2 permeation properties and stability of ceramic-carbonate dual-phase membranes at high pressures/temperatures are critical to their CO 2 separation and membrane reactor applications, but such data are not available in the literature. Here, this work aims to study the effect of high transmembrane pressure on CO 2 permeation flux and the stability of molten carbonate in the dual-phase samarium-doped ceria (SDC) and molten-carbonate (MC) membranes. Dead-end porous SDC tubular supports were made by a cold isostatic press (CIP)/sintering method with a low porosity (below 7%), and gas-tight SDC-MC membranes were prepared by direct infiltration of molten lithium and sodium carbonate mixture into SDC pores, with a MC volume fraction less than 7%. CO 2 permeation/separation tests were performed on the SDC-MC membranes using feed gas of equal molar CO 2 /N 2 mixture at feed pressures up to 15 atm and sweep gas of helium at 1 atm. CO 2 permeation flux for the SDC-MC membranes depends logarithmically on feed/permeate CO 2 pressure ratio in 660–810°C. The temperature dependence of CO 2 permeation shows activation energy of 30 kJ/mol. Due to the small MC volume fraction and hence low effective carbonate conductivity, CO 2 permeation of the SDC-MC membranes is dominated by the carbonate ionic conduction in the MC phase. The SDC-MC membranes remain in the same structure, morphology, and gas-tightness after CO 2 separation tests at high feed pressures and temperatures, showing high stability of SDC-MC membranes for high-temperature, high-pressure separation and chemical reaction applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rates and reversibility of CO 2 hydrogenation on Cu-based catalysts

Kinetics of reaction pathways involved in the conversion of CO 2 to methanol and CO on Cu/ZnO/Al 2 O 3 are resolved using in situ chemical titration, steady-state kinetic measurements, and mathematical formalisms for reversibility to probe salient species governing methanol selectivity and yield during CO 2 hydrogenation. Across a range of H 2 :CO 2 = 1:1 to H 2 :CO 2 = 80.5:1, active site density determined from in situ chlorine uptake remained invariant; hence, observed trends in rates can be interpreted as only arising from reaction kinetics and not from changing active site density. Kinetic and thermodynamic contributions to rates are decoupled to evaluate forward and reverse rates of methanol synthesis and reverse water-gas shift (RWGS) reactions. These kinetic analyses show that the forward rates of methanol synthesis exhibit persistent first order dependence on hydrogen pressure and are inhibited by water more significantly than the forward rates of RWGS. In contrast, the reverse rates of methanol synthesis and RWGS are both inhibited by H 2 . Consequently, without any modifications to the Cu/ZnO/Al 2 O 3 catalyst formulation, methanol selectivity can be increased to > 80% by increasing inlet H 2 partial pressure and methanol yield can be enhanced by ~20% by adding water adsorbents even under conditions far from equilibrium. Here, the kinetic treatments presented herein demonstrate a dearth of H* species during catalysis, provide thermodynamic constraints precluding sequential RWGS and CO hydrogenation as the pathway for methanol synthesis, reveal P H2 and P H2O as salient in determining methanol selectivity and yield by impacting both the forward and reverse rates of CO 2 hydrogenation on Cu/ZnO/Al 2 O 3 , and explicate the fundamentals of novel sorption-enhanced methanol synthesis, which not only alleviates equilibrium constraints but also alters the intrinsic rate at which the system approaches equilibrium.

42 ENGINEERING↗
DOE OSTI2021

Bridging Thermal Catalysis and Electrocatalysis: Catalyzing CO 2 Conversion with Carbon‐Based Materials

Abstract Understanding the differences between reactions driven by elevated temperature or electric potential remains challenging, largely due to materials incompatibilities between thermal catalytic and electrocatalytic environments. We show that Ni, N‐doped carbon (NiPACN), an electrocatalyst for the reduction of CO 2 to CO (CO 2 R), can also selectively catalyze thermal CO 2 to CO via the reverse water gas shift (RWGS) representing a direct analogy between catalytic phenomena across the two reaction environments. Advanced characterization techniques reveal that NiPACN likely facilitates RWGS on dispersed Ni sites in agreement with CO 2 R active site studies. Finally, we construct a generalized reaction driving‐force that includes temperature and potential and suggest that NiPACN could facilitate faster kinetics in CO 2 R relative to RWGS due to lower intrinsic barriers. This report motivates further studies that quantitatively link catalytic phenomena across disparate reaction environments.

Koshy, David M.↗
DOE OSTI2023

Local microenvironment tuning induces switching between electrochemical CO 2 reduction pathways

Gas diffusion layers (GDL) have become a critical component in electrochemical CO 2 reduction (CO 2 R) systems because they can enable high current densities needed for industrially relevant productivity. Besides this function, it is often assumed that the choice of catalyst and electrolyte play much more important roles than the GDL in influencing the observed product selectivity. Here, we show that tuning of the GDL pore size can be used to control the local microenvironment of the catalyst and hence, effect significant changes in catalytic outcomes. This concept is demonstrated using sputtered Ag films on hydrophobic PTFE substrates with 6 different pore sizes. Although Ag is known to be a predominantly CO generating catalyst, we find that smaller pore sizes favor the generation of formate up to a faradaic efficiency of 43%. Combined experimental and simulation results show that this is due to the influence of the pore size on CO 2 mass transport, which alters the local pH at the electrode, resulting in reaction pathway switching between CO and formate. Importantly, our results highlight the importance of the local microenvironment as an experimental knob that can be rationally tuned for controlling product selectivity: a key consideration in the design of CO 2 R systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Comparison of Approaches for CO 2 Sequestration as Solid Carbon Products

The growing global climate crisis linked to the rising atmospheric CO 2 levels calls for urgent and innovative solutions. Fixing CO 2 as valuable solid carbon products, such as carbon nanofibers or nanotubes (CNFs or CNTs), offers a promising way to potentially achieve net-negative CO 2 emissions. However, direct CO 2 -to-solid carbon faces significant thermodynamic and kinetic constraints, especially under mild reaction conditions. This mini-review compares three emerging approaches for CO 2 conversion into solid carbon: 1) using molten salt at high temperatures to produce CNFs or CNTs, 2) converting CO 2 to amorphous carbon with pyrophoric liquid metals at near room temperature, and 3) employing an electrocatalytic-thermocatalytic tandem process to produce CNFs at relatively mild temperatures. We examine the underlying principles, thermodynamic driving forces, and recent advances of each approach, and discuss the challenges and opportunities in catalyst development, reactor design, and energy management. We aim to highlight CO 2 fixation, facilitate net-negative CO 2 emissions, and stimulate more innovations for both environmental and economic benefits.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Carbonate Management to Enable Energy- and Carbon-Efficient CO 2 Electrolysis (Final Technical Report)

The rapid growth and plummeting cost of solar energy have spurred growing interest in using CO 2 electrolysis to produce chemicals and fuels as an alternative to conventional petrochemical processes. High-temperature (>800 °C) solid oxide electrolyzers that convert CO 2 into CO and O 2 have recently become commercially available. Low-temperature electrolysis cells offer the prospect of more convenient and flexible operation, which is critical for utilizing intermittent solar energy, and provide access to more valuable C 2+ products such as ethylene, ethanol, and propanol. Over the past 10 years, research in this area has yielded substantial progress in both fundamental understanding of the requisite electrocatalytic reactions and design of prototype devices. Leveraging insights from fuel cells and membrane water electrolyzers, researchers have developed electrolysis cells with gas diffusion electrodes (GDE) that have demonstrated high CO 2 electrolysis current densities (>100 mA cm –2 ) as well as promising selectivity and stability. Despite these advances, the energy efficiency (electrical energy-to-product) and carbon efficiency (CO 2 -to-product) of low-temperature CO 2 electrolysis remain far too low for large-scale deployment. A preponderance of evidence indicates that the principal source of efficiency losses is the rapid and thermodynamically favorable reaction of CO 2 with hydroxide (OH – ) to form carbonate (CO 3 2– ). Carbonate formation imposes steady-state electrolysis conditions that result in large voltage and CO 2 losses for all known (photo)electrochemical CO 2 cells. While much current research remains focused on CO 2 reduction catalyst design, this largely overlooked CO 3 2– problem presents a fundamental scientific barrier to creating a viable electrochemical option for converting solar energy into chemicals and fuels. The project pursues an integrated, multi-PI research effort that establishes a fundamental science of CO 3 2– management. PI Kanan and Co-PI Mani’s contribution to the project is to evaluate strategies to mitigate the CO 3 2– problem by changing the properties of the electrolyte and the environment in which CO 2 reduction catalysis takes place. Experimental studies showed that electrolytes composed of a high concentration of both CO 3 2– and HCO 3 – , which serve as moderately alkaline buffers, improved the cell voltage by compared to all-HCO 3 – electrolytes, but these buffered systems still show substantial CO 2 uptake that reduces pH over time. Computational studies developed a homogenized model of a CO 2 reduction catalyst layer that permits a low-cost exploration of the high-dimensional parameter space associated with catalyst layers on gas diffusion electrodes. The model was validated by accurately reproducing experimental data for the related but simpler reaction of CO reduction and then used to probe the effects of catalyst layer architecture on CO 2 reduction. Minimizing the size of catalyst and hydrophobic domains in the catalyst layer is predicted to mitigate CO 3 2– formation and thereby enable prolonged operation at elevated pH. In support of the CO 2 electrolysis studies, a new method for rapidly prototyping electrochemical cells was developed and validated. The method uses a combination of 3D printing and electroless plating to generate conductive cell components for evaluating new cell designs. The carbonate problem encompasses mass transport processes and acid-base reactions that are relevant to many other electrochemical systems. Investigation of strategies to address the carbonate problem led to an additional line of inquiry into the physicochemical phenomena that determine the efficiency of electrochemical acid-base production, which has numerous applications in the broader field of carbon management. New strategies for using the supporting electrolyte to inhibit H + /OH – recombination in electrochemical acid-base production were evaluated, leading to the development of a novel acid-base producing system that eliminates the need for ion exchange membranes and exhibits promising efficiency and current densities for scalable applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Informing field-scale CO 2 storage simulations with sandbox experiments: The effect of small-scale heterogeneities

Small-scale heterogeneities can significantly affect the fate of the CO 2 plume and trapping during CO 2 migration. We conducted geologic carbon storage field-scale simulations to investigate the impact of small-scale heterogeneities on plume dynamics and trapping performance. Small-scale heterogeneities have been shown to increase the amount of trapped CO 2 during buoyancy-driven flow. The trapped CO 2 saturation is validated by previous sandbox experimental work during buoyancy-driven flow in realistic heterogeneous domains and is implemented through the critical CO 2 saturation parameter (i.e., the first non-zero value in the drainage CO 2 relative permeability curve). Depending on the type and degree of heterogeneity, various critical CO 2 saturation values are exhibited. Furthermore, we investigated the effect of small-scale heterogeneities when multiple capillary pressure models are employed. This study demonstrates that an increase in critical CO 2 saturation reduces the CO 2 plume size and lateral extent, accompanying an increase in residual trapping and a decrease in solubility trapping. Lastly, we show that independent of the capillary pressure model used, an increase in critical saturation leads to similar CO 2 plume dynamics distribution and trapping performance. These results emphasize the importance of quantifying the effect of small-scale heterogeneity as they affect the large-scale behavior of the CO 2 plume.

58 GEOSCIENCES↗
DOE OSTI2021

Experimental study of three-dimensional CO 2 -water drainage and fracture-matrix interactions in fractured porous media

Estimation of CO 2 storage capacity in fractured porous reservoirs requires a better understanding of the CO 2 -water flow fundamentals in fracture-matrix systems. There are few core-flood experiments on three-dimensional CO 2 -water drainage in a fracture-matrix system, yet none have examined the impacts of the capillary continuity of fractures and fracture-matrix interactions. In this study, twelve drainage experiments were conducted in four fracture-matrix columns, each comprising a vertical stack of a cylindrical rock core, a filter paper serving as an analogue to a horizontal fracture, and a ceramic plate. Here, the core sample was surrounded by open space at the top and circumferential sides to model fractures, allowing for 3-D CO 2 -water drainage in the rock core and displaced water draining across the horizontal fracture. X-ray computed tomography was conducted to visualize the dynamic invasion/drainage processes in four rock core samples showing contrasts in anisotropy, permeability, and heterogeneity. Experimental results show (1) the equilibrium CO 2 saturations in the rock matrix vary from 0.10 to 0.60 at controlled capillary pressures up to 200 kPa, (2) the CO 2 saturations in the matrix increase with water saturation in the horizontal fracture resulting in better capillary continuity for water to drain across the fracture, and (3) the fracture water saturation can be enhanced by the non-uniform fracture capillary pressure and countercurrent flow of CO 2 and water across the fracture-matrix interface. In the case of high fracture water saturation, matrix CO 2 saturation largely depends on matrix anisotropy and heterogeneity. The core-scale experimental results contribute to understand the fracture-matrix interactions and CO 2 storage efficiency in fractured porous media.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Time-lapse seismic inversion for CO 2 saturation with SeisCO2Net: An application to Frio-II site

Seismic monitoring of geological CO 2 storage (GCS) involves highly nonlinear seismic inversion and petrophysical inversion, making it challenging to estimate CO 2 volume efficiently and detect possible early CO 2 leakages. Deep learning (DL) using convolutional neural networks (CNNs) has shown promise in solving highly nonlinear seismic inversion problems. However, direct estimation of CO 2 plume extent/saturation from time-lapse seismic gathers using DL is still underexplored, with no reported field applications to date. The investigation of field data is primarily hindered by scarcity of field data for neural network training. Other obstacles include highly nonlinear seismic-petrophysics inverse relationship, and presence of noise in field seismic data. We introduce SeisCO2Net, a deep CNN that predicts CO 2 saturation maps directly from time-lapse full waveform shot gathers. For training, we use site-specific geological information, fluid flow physics, rock physics, and seismic modeling to generate synthetic datasets that closely resemble the CO 2 storage site. Synthetic tests show promising results, inspiring us to apply SeisCO2Net's trained weights on field data collected at Frio-II GCS site by leveraging transfer learning principles. As reference, we compare SeisCO2Net's predicted CO 2 saturation maps with results obtained from physics-based inversion. Our analyses show both methods display similar CO 2 plume shapes, reasonable CO 2 plume characteristics, and comparable saturation values. Our results suggest pre-training CNNs on physics-informed synthetic datasets and then applying the learned weights to field data is a viable approach to estimating field CO 2 saturation. This method effectively addresses the scarcity of field training data, thus encouraging the feasibility of long-term GCS monitoring.

58 GEOSCIENCES↗
DOE OSTI2021

Bridging Thermal Catalysis and Electrocatalysis: Catalyzing CO 2 Conversion with Carbon-Based Materials

Understanding the differences between reactions driven by elevated temperature or electric potential remains challenging, largely due to materials incompatibilities between thermal catalytic and electrocatalytic environments. In this work, we show that Ni, N-doped carbon (NiPACN), an electrocatalyst for the reduction of CO 2 to CO (CO 2 R), can also selectively catalyze thermal CO 2 to CO via the reverse water gas shift (RWGS) representing a direct analogy between catalytic phenomena across the two reaction environments. Advanced characterization techniques reveal that NiPACN likely facilitates RWGS on dispersed Ni sites in agreement with CO 2 R active site studies. Finally, we construct a generalized reaction driving-force that includes temperature and potential and suggest that NiPACN could facilitate faster kinetics in CO 2 R relative to RWGS due to lower intrinsic barriers. This report motivates further studies that quantitatively link catalytic phenomena across disparate reaction environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ionic Liquid Functionalizes the Metal Organic Framework for Microwave-Assisted Direct Air Capture of CO 2

Sorbents for direct air capture (DAC) of CO 2 typically employ a chemisorbing material that requires regeneration at elevated temperatures, which is an energy-intensive step. Here, we developed composites of metal organic framework (MOF) with a functional ionic liquid (IL) at 5, 20, and 35 wt % loading, capable of CO 2 chemisorption and regeneration by moisture-swing coupled microwave (MW) irradiation. In dynamic breakthrough measurements, CO 2 from synthetic air (500 ppm of CO 2 ) was selectively absorbed (0.5 mmol/g at 30 °C) and then rapidly released (2–4 min) by dielectric heating at 60 °C. The developed IL/MOF composites demonstrate (1) targeted energy transfer to the IL domains where CO 2 is released due to dielectric heating upon MW irradiation and (2) a fast desorption rate due to large surface area offered by the MOF architecture. Furthermore, this study establishes carbon capture through surface enhancement of a porous substrate with ILs for future DAC processes that can be powered by sustainable energy sources.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High Performance Solvent for NGCC Flue Gas CO 2 Capture (Final Technical Report)

Amine-based solvent absorption is the most mature and reliable technology for large scale CO 2 capture, dating back to the 1930s when monoethanolamine (MEA) was used to treat acid gases from oil refineries. However, while strategic advancements have optimized the CO2 capture process, the cost of capture remains high, where current estimates suggest that CO 2 capture costs are around $\$$72/tonne of CO 2 . To address this, solvent development and optimization have become a focus of current research. This project sought to develop a high-performance solvent to reduce the overall cost of CO 2 capture from NGCC flue gas. Here, solvent optimization focused on: (1) reducing the energy required for CO 2 desorption in a reboiler, (2) improving CO 2 absorption and desorption reaction kinetics, (3) improving solvent stability, and (4) reducing environmental impacts. Susteon has developed and evaluated a promoted solvent, Sustenol™, for NGCC flue gas CO 2 capture. The optimized Sustenol™ also shows a higher dynamic CO 2 absorption capacity of ~0.5 mol CO2 /mol amine compared to 0.25 mol CO2 /mol amine for 30 wt% MEA. Additionally, the solvent is oxidatively, thermally and hydrothermally stable, which leads to lower solvent loss and emissions. These advancements have resulted in a solvent regeneration energy of 2.16 GJ/tonne of CO 2 which is >30% lower than current state-of-the-art commercial and emerging solvents. Combined with empirical data from the bench and pilot scale testing, this preliminary TEA study indicated the cost of CO 2 capture by Sustenol™ for 97% CO 2 removal at $\$$54/tonne and for 90% removal at $\$$49/tonne, with a pathway to achieve $\$$45/tonne of CO 2 with continued process and solvent advancements. Susteon has developed a technology roadmap to reduce the cost of CO 2 capture to <$\$$45/tonne for NGCC flue gas. Susteon plans to derisk this technology for commercial deployment through comprehensive solvent degradation testing, long-term testing in a pilot plant at 5 tonne CO2 /day and demonstration scale testing at 100 tonne CO2 /day with NGCC flue gas and engineering design studies to qualify Sustenol™ as a drop-in replacement solvent.

03 NATURAL GAS↗
DOE OSTI2022

Sensitivity of geophysical techniques for monitoring secondary CO 2 storage plumes

For geologic carbon storage, the ability to detect secondary CO 2 plumes—defined as those CO 2 plumes accumulating outside the intended storage reservoir—is fundamental to preventing unexpected CO 2 migration into groundwater resources and for risk and liability management. Understanding the sensitivity of various geophysical methods to secondary plumes is crucial for designing cost-effective monitoring schemes. We use several modeling scenarios to demonstrate the process of assessing sensitivities and detection thresholds of three primary geophysical techniques—surface seismic, borehole-to-surface electromagnetic (EM), and surface and borehole gravity—for early detection of secondary CO 2 plumes in the post-injection phase. While seismic reflection methods are often considered in monitoring strategies to track the evolution of CO 2 plumes, they are also the most expensive. Due to cost considerations, especially for long-term post-injection monitoring, other techniques complement seismic monitoring when designing an adaptive monitoring network. Borehole-to-surface EM or surface gravity surveys are feasible for time-lapse monitoring of deep secondary CO 2 plumes. Furthermore, these surveys could be carried at intervals defined by site-specific conditions. If time-lapse EM and/or gravity surveys detect any signal responses beyond the expected change, it would trigger a need for the higher resolution seismic survey.

58 GEOSCIENCES↗
DOE OSTI2023

Improving the performance for direct electrolysis of CO 2 in solid oxide electrolysis cells with a Sr 1.9 Fe 1.5 Mo 0.5 O 6– δ electrode via infiltration of Pr 6 O 11 nanoparticles

Direct CO 2 electrolysis using solid oxide electrolysis cells (CO 2 -SOECs) holds promise to efficiently convert carbon dioxide to carbon monoxide and oxygen. Cathodes with desirable catalytic activity and chemical stability play a critical role in the development of direct CO 2 -SOECs. Although Sr 2 Fe 1.5 Mo 0.5 O 6–δ (SFM) has exhibited promise for direct CO 2 -SOECs due to its redox stability, it suffers from insufficient activity for the CO 2 reduction reaction (CO 2 RR). Here we report interface engineering of nanosized Pr 6 O 11 on the SFM cathode obtained through infiltration to promote the CO 2 RR performance for direct CO 2 -SOECs. The effect of Pr 6 O 11 loading on the performance of the CO 2 RR is systematically investigated. At 800 °C, the current density of the Pr 6 O 11 infiltrated SFM cathode with an optimum Pr 6 O 11 loading of 14.8 wt% reaches 1.61 A cm –2 at 1.5 V, more than double that of the SFM cathode (0.76 A cm –2 ) under the same operating conditions. X-ray photoelectron spectroscopy (XPS) characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicate that the adsorption ability of CO 2 on the SFM cathode has been significantly improved by the formation of Pr 6 O 11 . Temperature-programmed desorption (TPD) of CO 2 measurements further manifest that a 14.8 wt% Pr 6 O 11 -SFM cathode has better CO desorption capacity. In addition, polarization resistance of the SFM cathode has significantly decreased with the addition of Pr 6 O 11 . Three-electrode measurement was used to analyze the improved electrode kinetics. Finally, these results demonstrate that the formation of Pr 6 O 11 in the SFM cathode through infiltration is a promising approach for increasing CO 2 RR activity for CO 2 -SOECs.

03 NATURAL GAS↗
DOE OSTI2020

Materials Data on Rb(CO)2 by Materials Project

Rb(CO)2 crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of two Rb(CO)2 sheets oriented in the (1, 0, 0) direction. Rb is bonded in a 6-coordinate geometry to six equivalent O atoms. There are a spread of Rb–O bond distances ranging from 2.90–3.06 Å. C is bonded in a distorted single-bond geometry to one O atom. The C–O bond length is 1.27 Å. O is bonded in a distorted single-bond geometry to three equivalent Rb and one C atom.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluation of Aliphatic Alcohols for CO 2 Capture Using the Characteristic Carbonate Frequency

Control over CO 2 capture and utilization are important scientific and technological challenges. Although a variety of amine absorbents are used for capture, releasing the captured CO 2 is often difficult and limits their recyclability. Therefore, it is crucial to control the strength of the CO 2 bond with the absorbent. Furthermore, it is desirable to use a method that can conveniently report the strength of this bond. This motivates exploring adducts of CO 2 with alcohols in the presence of a base, using vibrational spectroscopy to report on the bond strength. Although reactions of alcohols with CO 2 to form alkyl carbonates are known, a systematic study of these adducts has not been conducted. Here we show formation of alkyl carbonates by a series of alcohols spanning the pK a range 9.5 to 16.8. We show experimental and computational results for the frequency of the characteristic asymmetric stretch of the carbonate and demonstrate that it correlates inversely with the pK a of the alcohol. Based on computations of the bond lengths and previous work, we propose that this frequency also correlates inversely with the adduct strength. As a result, this work extends the scope of CO 2 capture reagents and inspires further research in tuning alcohols as reversible absorbents.

Alcohols↗
DOE OSTI2020

Materials Data on CrP4(CO)2 by Materials Project

CrP4(CO)2 crystallizes in the monoclinic C2/c space group. The structure is zero-dimensional and consists of four CrP4(CO)2 clusters. Cr2+ is bonded in a distorted L-shaped geometry to two equivalent C1- and four P1+ atoms. Both Cr–C bond lengths are 1.95 Å. There are two shorter (2.21 Å) and two longer (2.24 Å) Cr–P bond lengths. C1- is bonded in a linear geometry to one Cr2+ and one O2- atom. The C–O bond length is 1.16 Å. There are two inequivalent P1+ sites. In the first P1+ site, P1+ is bonded in a single-bond geometry to one Cr2+ atom. In the second P1+ site, P1+ is bonded in a single-bond geometry to one Cr2+ atom. O2- is bonded in a single-bond geometry to one C1- atom.

36 MATERIALS SCIENCE↗