Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHLORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

High-precision Penning trap mass measurements of neutron-rich chlorine isotopes at the 𝑁 = 28 shell closure

Although it is known that the N = 28 spherical shell closure erodes, the strength of the closure with decreasing proton number Z < 20 is an open question in nuclear structure. Here, in this region of interest, high-precision mass measurements of neutron-rich 43-45 Cl isotopes were performed at the Low Energy Beam and Ion Trap (LEBIT) when coupled to the National Superconducting Cyclotron Lab. The resulting mass excesses (MEs) are ME(⁴³Cl) = -24114.4(1.7) keV, ME(⁴⁴Cl) = -20450.8(10.6) keV, and ME(⁴⁵Cl) = -18240.1(3.7) keV, and improve the uncertainty of these masses by up to a factor of ∼40 compared to the previous values reported in the 2020 Atomic Mass Evaluation. Comparison to ab initio calculations using the Valence-Space In-Medium Similarity Renormalization Group (VS-IMSRG) shows good agreement up to and including the closure.

Erington, H. [Michigan State Univ., East Lansing, ↗

Mutualistic interaction between dichloromethane- and chloromethane-degrading bacteria in an anaerobic mixed culture: Mutualistic degradation of chlorinated methanes

The microbial mixed culture RM grows with dichloromethane (DCM) as the sole energy source generating acetate, methane, chloride and biomass as products. Chloromethane (CM) was not an intermediate during DCM utilization consistent with the observation that CM could not replace DCM as a growth substrate. Interestingly, cultures that received DCM and CM together degraded both compounds concomitantly. Transient hydrogen (H 2 ) formation reaching a maximum concentration of 205 ± 13 ppmv was observed in cultures growing with DCM, and the addition of exogenous H 2 at concentrations exceeding 3000 ppmv impeded DCM degradation. In contrast, CM degradation in culture RM had a strict requirement for H 2 . Following five consecutive transfers on CM and H 2 , Acetobacterium 16S rRNA gene sequences dominated the culture and the DCM-degrader Candidatus Dichloromethanomonas elyunquensis was eliminated, consistent with the observation that the culture lost the ability to degrade DCM. These findings demonstrate that culture RM harbours different populations responsible for anaerobic DCM and CM metabolism, and further imply that the DCM and CM degradation pathways are mechanistically distinct. H 2 generated during DCM degradation is consumed by the hydrogenotrophic CM degrader, or may fuel other hydrogenotrophic processes, including organohalide respiration, methanogenesis and H 2 /CO 2 reductive acetogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of O 2 addition on in-plasma photo-assisted etching of Si with chlorine

Addition of oxygen was used to control the in-plasma photo-assisted etching (PAE) of p-type Si(100) and poly-Si in a high density, inductively coupled, Faraday-shielded, Ar/Cl 2 (225/25 SCCM), 60 mTorr plasma. After etching, samples were transferred under vacuum to an UHV x-ray photoelectron spectroscopy chamber for surface analysis. Samples etched under PAE conditions (ion energies below the ionassisted etching, IAE, threshold) had a thicker surface oxide and lower [Cl] surface concentration, when compared to samples etched under IAE conditions (ion energies above the IAE threshold). PAE was found not to be affected by 0.1 or 0.25 SCCM O 2 addition, while etching stopped with more than 0.5 SCCM O 2 addition. IAE with RF power on the sample stage, resulting in -65 V self-bias, was not affected by up to 2 SCCM of oxygen addition but decreased rapidly when more than 5 SCCM O 2 was added to the plasma. These results imply that PAE may be completely suppressed, while IAE occurs unobstructed. The implications of these findings are discussed in view of applications involving continuous wave and pulsed-plasma processes.

36 MATERIALS SCIENCE↗

Deep potential molecular dynamics simulations of ion-enhanced etching of silicon by atomic chlorine

The continued development of plasma-assisted processing techniques requires a fundamental understanding of plasma-surface interactions. Molecular dynamics (MD) simulations have been employed to complement experimental studies and better understand the properties of such systems. Recently, machine learning (ML) methods have enabled the development of ab initio-based interatomic potentials, which can be generalized to complex combinations of multiple atom types. In this work, we use ML potentials developed using the Deep Potential Molecular Dynamics (DeepMD) framework to provide a model of ion-enhanced etching of Si by Cl atoms. We demonstrate the importance of proper selection of the training data set to the accuracy of the DeepMD model and compare our results to MD results using empirical potentials, as well as to experimental measurements. Exposure of undoped Si at 300 K to thermal Cl atoms yields a steady-state Cl coverage of 1.25 monolayers, which is slightly lower than the value obtained in previous experimental studies. Predictions of Si etch yields by simultaneous Cl atom and Ar + ion impacts as a function of ion energy, neutral to ion flux ratio, and angle of incidence of the ions are in reasonably good agreement with classical MD results and experimental measurements. Finally, etch yields and SiCl x mixed layer thicknesses during simultaneous bombardment of the Si(100) surface by Cl atoms and Cl + ions are in good agreement with experimental data. In conclusion, the present work is a necessary condition for the extension of the DeepMD procedure to more complex systems of interest in plasma-surface interactions.

Artificial neural networks↗

A Combined Density Functional Theory and Monte Carlo Investigation of the Competitive Adsorption of Atomic Oxygen and Chlorine to the Ni (111) Surface

Designing the next generation of corrosion resistant alloys will rely, in part, on developing a better understanding of how to favor the formation of protective surface oxide films in chemically aggressive environments. In this work, we examined the early stages of oxygen adsorption on Ni (111) in the presence of chloride, a known corrosive agent. The analysis was accomplished from first principles via the construction of a database of density functional theory (DFT) calculations which was then used to fit a cluster expansion model Hamiltonian. DFT calculations showed that the face centered cubic (fcc) sites were most stable for adsorption of both chloride and oxygen in agreement with the literature. Hence, only adsorption to the fcc sites was considered in the cluster expansion and the DFT database. The potential function was constructed with the aid of a genetic algorithm (GA) which helped with the selection of appropriate clusters from a candidate pool of figures. The potential function that was developed contained a total of 50 coupled (i.e. Cl-O) and non-coupled (i.e. Cl-Cl and O-O) clusters and was reasonably good at predicting DFT results with a leave-one-out cross validation score of 28.6 meV/site. The potential function was then used to perform a systematic and efficient calculation of the adsorption isotherms of oxygen and chloride at 300 K. It was observed that relatively large chloride chemical potentials were required to displace adsorbed oxygen. Furthermore, the chloride adsorption isotherms indicated a rapid shift between 0.6 ML and 1 ML. Here, this transition was explained by the need for a large chloride chemical potential to overcome the repulsive forces between the chloride adatoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zinc transport in hydrothermal fluids: On the roles of pressure and sulfur vs. chlorine complexing

Here, we provide an experimental confirmation of the suggestion, based on thermodynamic simulations and extrapolations (Zhong et al. 2015), that Zn is transported in the form of chloride complexes in most shallow hydrothermal systems, while bisulfide complexes become increasingly important in deep hydrothermal systems. We used in situ X-ray absorption spectroscopy (XAS) diamond anvil cell experiments to determine Zn(II) speciation in a 1 m NaHS + 0.2 m HCl solution in contact with sphalerite. XANES data clearly show that Zn coordinates to chloride and/or oxygen ligands from room temperature up to and including 200 C, and then at higher temperatures (≥ 300 C) and pressures (> 2 kbar) changes to complexing with sulfur. Our data confirm that bisulfide complexes become increasingly important at high pressure and temperature, due to an increase in sulfur solubility and to favorable entropy contributions for bisulfide versus chloride complexes.

36 MATERIALS SCIENCE↗

Fouling-resistant, chlorine-tolerant zwitterionic membranes for treatment of produced water in the Permian Basin

ZwitterCo, Inc. performed a two-year study on the use of its superfiltration membrane products for the treatment of produced water from the Permian Basin, including pilot testing using actual produced water samples. The results showed a highly competitive techno-economic analysis compared to existing produced water treatment options and show a path towards beneficial reuse of produced water.

04 OIL SHALES AND TAR SANDS↗

Chlorine Worth Study in Support of PF-4 Operations [Slides]

The primary concern of this study is if experiments can be designed/conducted to provide technical justification to NCS in order to increase mass limits. This goal is in direct support of 30 pits per year mission, one of the top priorities for NNSA. The accelerated timeline is as follows: Initial tasking, June 2020; preliminary design completion (CED-1 equivalent), November 2020; final design completion (CED-2 equivalent), March 2021; part receipt and inspection completion (CED-3a equivalent), October 2021; experiment execution (CED-3b equivalent), December 2021; experiment documentation write-up completion (start CED-4a equivalent), January 2022; and ICSBEP target (CED-4a equivalent), Fall 2022.

2019 ARCHIMEDES LDRD project↗