Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CATASTROPHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders: Synthesis of different powders structures and real magnetic properties of nanomanganites

The difference in the magnetic properties between two lanthanum manganite nanopowders with identical phase and chemical composition is discussed in terms of the influence of nanopowder synthesis conditions on their properties. The aim of this investigation was to show the influence of precursor type and structure on the structure and properties of final La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders obtained by precipitation technique. The forming of a complex structure of precursor materials during drying and inheritance at firing stage led to the formation of bimodal particle size distribution and magnetic properties typical of coarse powders. The correct choice of precursor material and the technological conditions of the drying and firing stage were allowed for the creation of a uniform powder structure with special magnetic properties. We showed that the magnetic properties of nanopowders were not always determined by chemical or phase composition and mean particle size of synthesized powders. The difference in precipitation process can lead to unpredictable and catastrophic results, and masked the effect of nanoparticles on the magnetic properties of the material. - Highlights: • Precursor’s structure has a strong influence on LSM nanoparticles structure. • Amorphous precursor structure led to uniform LSM nanoparticles formation. • Crystal precursors led to the formation of bimodal LSM particles distribution. • Decrease the single-domain LSM NP size led to decrease the powder’s magnetization.

36 MATERIALS SCIENCE↗

Hydrogen trapping in 3D-printed (additive manufactured) Ti-6Al-4V

Highlights: • The AM process influence hydrogen trapping and desorption behavior. • Susceptibility to hydrogen embrittlement significantly depends on the printing direction. • Hydrogen desorption in SLM Ti-6Al-4V is designated to dislocations and Ti-hydride phase. - Abstract: Hydrogen trapping state and desorption behavior in 3D printed-Ti-6Al-4V, designed using additive manufacturing (AM), have been investigated. The AM process in this work is selective laser melting (SLM) by which components are built using melting powder's layers with a laser beam. During this process, hydrogen can meet with Ti, leading to a catastrophically failure known as hydrogen embrittlement. The effect of hydrogen on different textural anisotropy of AM-Ti-6Al-4V, and on metal's defect (created during the SLM process), have been studied in relation with hydrogen trapping state, and hydrogen embrittlement. The common effect of hydrogen on phase transformation in AM-Ti-6Al-4V has been shown. It is shown that the susceptibility to hydrogen embrittlement significantly depends on the printing direction. The impact of hydrogen desorption on AM-Ti-6Al-4V have been demonstrated with thermal desorption spectrometry (TDS), X-ray diffraction (XRD) and microstructural observations.

36 MATERIALS SCIENCE↗

Improved damage tolerance of SiC-based nuclear fuel cladding with novel multi-layered SiC coating design at 1200 °C

Continuous SiC fibre reinforced SiC matrix composites (SiC f -SiC m ) with monolithic SiC outer coatings are considered as a damage-tolerant cladding design for loss of coolant accident (LOCA) conditions in light water reactors. However, monolithic SiC coatings are brittle and prone to catastrophic failure. In this study, a SiC f -SiC m cladding with a novel multi-layer SiC outer coating (11 sub-layers, ∼260 µm in total thickness) was investigated under C-ring compression at room temperature and 1200 °C in argon environment. Real-time synchrotron X-ray computed tomography (XCT) was employed to capture crack initiation and propagation processes. Compared to conventional monolithic SiC outer coatings, the multi-layer coating structure facilitated crack deflection and bifurcation enhancing its damage tolerance at both temperatures. Despite pre-existing surface cracks, claddings exhibited stable mechanical-performance at both temperatures. These initial cracks did not critically affect the failure processes as they were not aligned with the maximum stress direction. Furthermore, the microstructure, distribution of residual stresses, and local properties of individual components in the material were thoroughly characterized, and compared with open literature on conventional claddings with monolithic outer coatings. These results provide new insights into the failure mechanisms of multi-layer SiC coatings and offer guidance for the future design of accident-tolerant nuclear fuel claddings.

36 - MATERIALS SCIENCE↗

Microwave combustion synthesis of in situ Al{sub 2}O{sub 3} and Al{sub 3}Zr reinforced aluminum matrix composites

Al{sub 2}O{sub 3} and Al{sub 3}Zr reinforced aluminum matrix composites were fabricated from Al and ZrO{sub 2} powders by SiC assisted microwave combustion synthesis. The microstructure and reaction pathways were analyzed by using differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). The results showed that the heating rate during microwave synthesis was very high and the entire process took several minutes and that the ignition temperature of the reaction was much lower than that of conventional methods. In addition, the resulting microstructure was found to be finer than that prepared by the conventional methods and no cracks can be seen in the Al{sub 3}Zr reinforcements. As such, the newly developed composites have potential for safety-critical applications where catastrophic failure is not tolerated.

36 MATERIALS SCIENCE↗

In Situ Investigation of Chemomechanical Effects in Thiophosphate Solid Electrolytes

Solid-state batteries can suffer from catastrophic failure at high current densities due to solid electrolyte fracture, interface decomposition, or lithium filament growth. Failure is linked to chemomechanical material transformations that can manifest during electrochemical cycling. We systematically investigate how solid electrolyte microstructure and interfacial decomposition (e.g., interphase) affect failure mechanisms in lithium thiophosphates (Li3PS4, LPS) electrolytes. Kinetically metastable interphases are engineered with iodine doping, and microstructural control is achieved using milling and annealing processing techniques. In situ transmission electron microscopy reveals iodine diffusion to the interphase, and upon electrochemical cycling, pores are formed in the interphase region. In situ synchrotron tomography reveals that interphase pore formation drives edge fracture events, which are the origin of through-plane fracture failure. Fractures in thiophosphate electrolytes actively grow toward regions of higher porosity and are affected by heterogeneity in microstructure (e.g., porosity factor). This report provides fundamental design guidelines for high-performance solid-state batteries.

25 ENERGY STORAGE↗

The roles of interfaces and other microstructural features in Cu/Nb nanolayers as revealed by in situ beam bending experiments inside an scanning electron microscope (SEM)

Interfaces and their interactions with other microstructural features, such as grain boundaries or twin structures, have been widely viewed as parameters for designing metallic nanolayers. These interfaces could play a role in hindering cracks from propagating across the nanolayers while in operation. To date, many studies have focused on the roles of interfaces in affecting the plasticity mechanisms and thus the deformability of nanolayers. However, no studies have investigated on the subsequent mechanisms of fracture leading to the final failure. In this study, in situ microfracture bending tests inside a scanning electron microscope (SEM) were performed on the notched clamped beams of Cu/Nb nanolayers with a similar layer thickness using two different fabrication processes: physical vapor deposition (PVD) and accumulative roll bonding (ARB). Due to the columnar grains of the Cu/Nb PVD beams, a sudden catastrophic linear elastic, brittle fracture phenomenon was observed; in the Cu/Nb ARB beams, fracture events of notch widening phase and crack initiation and fracture along the shear instability were observed. Detailed examinations showed the presence of competing mechanisms between the multilayered interface, columnar grain boundary, and experimental factors of beam geometry and the position of the tip. With this newfound knowledge, new types of metallic nanolayers can be designed with enhanced strength and fracture resistant properties.

36 MATERIALS SCIENCE↗

Tailoring copper current collector roughness and crystallographic orientation to improve lithium plating

Secondary lithium metal batteries are of great interest due to a high theoretical energy density, but rechargeability is limited by the formation of lithium dendrites that lead to internal short circuits and catastrophic cell failure. Mitigating dendrites through uniform current distribution at the current collector is a promising solution to enabling long cycle life of lithium metal electrodes. Here, the impact of copper crystal orientation and roughness on electrochemically deposited lithium morphology is studied. For 50 cycles, the capacity retention from greatest to least followed polycrystalline copper 95 ± 1 % (MC-PC) ≥ 94.55 ± 0.01 % Cu (110) > 93.0 ± 0.4 % Cu(111) > 75.8 ± 0.1 % Cu(100). Cu(100) performed the worst in all cases with shorts occurring frequently before reaching 50 cycles. Cryo-scanning electron microscopy images showed that after 50 cycles, MC-PC Cu had the best lithium morphology, but at early cycles, Cu(111) formed the densest lithium layer. MC-PC Cu had the most uniform lithium nucleation which may have been caused by increased roughness relative to the single crystal samples. When polycrystalline Cu (F-PC) roughness was systematically controlled, the cumulative Coulombic efficiency increased from about 0.3–0.5 with increasing roughness from an Ra of about 10–40 nm. Lastly, plating rates were studied. Slower rates of 0.25 mA/cm 2 exhibited denser lithium morphology in all cases as compared to 0.5 and 1.0 mA/cm 2 , but the relative porosity of Li deposited on the different current collectors depended on the rate applied.

Copper↗

Effects of the density of collision cascades: Separating contributions from dynamic annealing and energy spikes

We present a quantitative model for the efficiency of the molecular effect in damage buildup in semiconductors. Our model takes into account only one mechanism of the cascade density dependence: nonlinear energy spikes. In our three-dimensional analysis, the volume of each individual collision cascade is divided into small cubic cells, and the number of cells that have an average density of displacements above some threshold value is calculated. We assume that such cells experience a catastrophic crystalline-to-amorphous phase transition, while defects in the cells with lower displacement densities have perfect annihilation. For the two limiting cases of heavy (500 keV/atom {sup 209}Bi) and light (40 keV/atom {sup 14}N) ion bombardment of Si, theory predictions are in good agreement with experimental data for a threshold displacement density of 4.5 at.%. For intermediate density cascades produced by small 2.1 keV/amu PF{sub n} clusters, we show that dynamic annealing processes entirely dominate cascade density effects for PF{sub 2} ions, while energy spikes begin contributing in the case of PF{sub 4} cluster bombardment.

36 MATERIALS SCIENCE↗

Modeling and experimental validation of a W f /W-fabrication by chemical vapor deposition and infiltration

Tungsten (W) has a unique combination of excellent thermal properties, low sputter yield, low hydrogen retention, and acceptable activation. Therefore, W is presently the main candidate for the first wall material in future fusion devices. However, its intrinsic brittleness and its further embrittlement during operation bears the risk of a sudden and catastrophic component failure. As a countermeasure, tungsten fiber-reinforced tungsten (W f /W) with extrinsic toughening is being developed. A possible synthesis route is chemical vapor deposition (CVD) using heated W fabrics as substrate. The challenge is that the growing CVD-W can isolate domains from precursor access leading to strength-reducing pores. To deepen the process understanding and to optimize the CVD parameters, models were developed with COMSOL Multiphysics and validated experimentally. W deposition rate equations as function of the temperature and the partial pressures of the precursors H 2 and WF 6 were experimentally validated in previous work. In the present article, these equations are applied to obtain partial pressures within the CVD reactor. The results are taken as input for transient simulations in the microscale, in which W coatings, growing onto multiple adjacent W fibers, were simulated via mesh deformation and remeshing. The surface-to-surface contact of the W coatings and the corresponding potential pore formation were simulated by implementing sophisticated deposition rate stop conditions. Within the measuring uncertainties of ≃ ±1%, the models are validated successfully by experimental comparison regarding the deposition rate, pore structure, and relative densities ranging from 0.6 to 0.9.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Preliminary Investigation of Rapid Depressurization Phenomena Following a Sudden DLOFC in a VHTR

Air ingress has been identified as a potential threat for Very High Temperature gas-cooled Reactors (VHTR). Reactor components constructed of graphite will, at high temperatures, produce exothermic reactions in the presence of oxygen. The danger lies in the possibility of fuel element damage and core structural failure. Previous investigations of air ingress mechanisms have focused on thermal and molecular diffusion, density-driven stratified flow due to hydrodynamic instability, and natural convection. Here, we investigate the possibility of a rapid flow reversal of helium coolant due to a Taylor (rarefaction) wave expansion after a hypothetical sudden Depressurized Loss of Forced Cooling (DLOFC) scenario in a VHTR. Conceivably, flow reversal of the helium coolant could entrain significant quantities of air into the reactor vessel. Our analysis starts with a one-dimensional shock tube simulation to simply illustrate the development of a Taylor wave with resulting reentrant flow. Then, a simulation is performed of an idealized two-dimensional axisymmetric representation of the lower plenum of General Atomics GT-MHR subjected to a hypothetical catastrophic break of the hot duct. Analysis shows the potential for significant and rapid air ingress into the reactor vessel in the case of a large break in the cooling system.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Self-welding of Inconel 617 under high-pressure-high-temperature conditions for nuclear reactors

In response to continuously declining availability of fossil fuels, nuclear power has become an important alternative source of power generation. Growing application of nuclear power has relieved the shortage of electricity. However, it is also accompanied with new drawbacks, such as radioactive waste, and potential catastrophic consequences in case of major accidents. For nuclear power plants, severe accidents mostly originate from the reactor, making the reliability of the reactor of paramount importance to the overall safety of a nuclear power plant. Massive heat generation through nuclear fission/fusion and heat exchange render the whole reactor operating at extremely high temperatures (i.e., 900–1000 °C), which, in conjunction with large load from subsystems/ components made of special heavy alloys, renders the reactor under the risk of self-welding, a phenomenon that could lead to strong bonding between components and paralyze the operability of the nuclear reactor. This paper investigates the self-welding behavior of Inconel 617, a primary candidate nickel alloy for key components of the next generation gas cooled nuclear plant, inside a controlled atmospheric furnace with preset static load, simulating the high-pressure high-temperature conditions inside nuclear reactors. Therefore, test results show that Inconel 617 experiences self-welding through common oxide zone at the interface, and it has remarkable bonding strength, requiring 4114 N (57.15 MPa) and 4338 N (60.25 MPa) to break apart a mated sample pair, under an apparent contact pressure of 0.341 MPa after 50-h aging, in helium and air atmospheres, respectively. The higher oxygen presence in air results in slightly stronger oxide bond at the interface, compared to helium, and the bond strength increases with dwell time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

More high-impact atmospheric river-induced extreme precipitation events under warming in a high-resolution model

Extreme precipitation events, as occurred in Europe 2021, or western North America 2023, with an intensity of 75 mm/day or 100 mm/day, respectively, exert a catastrophic impact. Lower-resolution (~100 km) climate models cannot simulate the intensity, nor their response to greenhouse warming. Using a high-resolution (~25 km) model capable of simulating such events, here we show that frequency-weighted area of such events over western Europe and the west coast of North America likely expands by more than 80% under an approximately 4°C of global warming from the historical levels. Along the west coasts of Europe and North America, area impacted by atmospheric rivers-induced extreme precipitation events is projected to double, driven by intensified landfalling atmospheric rivers. Thermodynamic processes drive the increase, whereas dynamic processes reduce the intensity over western Europe but enhance it along the west coast of North America. Here our findings provide policy-relevant information for climate adaptation strategies.

54 ENVIRONMENTAL SCIENCES↗

Classification and computation of extreme events in turbulent combustion

In the design of practical combustion systems, ensuring safety and reliability is an important requirement. For instance, reliably avoiding lean blowout, flame flashback or inlet unstart is critical for ensuring safe operation. Currently, the science of predicting such events is based on prior experience, limited modeling or diagnostic tools and purely statistical approaches. Even though computational and experimental tools for studying combustion devices have vastly advanced in the last three decades, the analysis of such failure events has not been pursued widely. While the use of data for model development and calibration is being widely accepted, the extension to failure events introduces numerous challenges. In particular, the focus here is on so-called data-poor problems, where the cost of generating data is extremely high and is not easily amenable to existing computational and experimental approaches. Data-poor problems are particularly relevant when related to extreme events (also called anomalous events) that can lead to catastrophic failure of the system. It is argued that transient events that describe such failure can have different causal mechanisms. To develop the scientific inference process, a classification of such problems is used to determine specific modeling paths as well as computational tools needed. Research opportunities in the emerging field of extreme event prediction are highlighted in order to identify critical and immediate needs.

97 MATHEMATICS AND COMPUTING↗

Understanding the role of flow dynamics in thermoacoustic combustion instability

Thermoacoustic combustion instability is one of the most challenging operational issues in several high-performance, low-emissions combustion technologies, including gas turbines, aircraft engines, rockets, and industrial boilers. Driven by the coupling between combustor acoustics and flame heat release rate fluctuations, thermoacoustic combustion instability can lead to reduced operability, increased emissions, and, in the most extreme cases, catastrophic failure of combustor components. The feedback loop between acoustics and combustion is often facilitated by fluid mechanic oscillations, referred to as “velocity coupling,” whereby acoustic oscillations drive flow fluctuations, which in turn create fluctuations in the flame. The character of these fluid mechanic oscillations is highly dependent on the structure of the flow field and the receptivity of the flow to external excitation. Combustor flow fields use features like fluid recirculation and shear to enhance flame holding and reduce emissions, but these are also the same features that can make the flow receptive to acoustic excitation or even drive self-excited oscillations. Here, in this paper, we discuss the basics of thermoacoustic instability with a focus on the role of hydrodynamic oscillations in typical combustor flows. To facilitate this discussion, we explore the hydrodynamic instability characteristics of several key combustor unit flows (wakes, swirling jets, etc.) and show how the hydrodynamic stability of a flow is an important consideration in determining a combustor’s propensity for thermoacoustic oscillations. Several examples of coupling between hydrodynamics and thermoacoustics are discussed to illustrate this important link. The paper concludes by discussing the potential for designing flow fields that are thermoacoustic instability resistant, either through a reduction in the receptivity of the flow or through nonlinear coupling mechanisms by which self-excited flow instabilities can suppress velocity-coupled combustion oscillations.

42 ENGINEERING↗

Asteroid diversion considerations and comparisons of diversion techniques

The threat of asteroid impacts on Earth poses a low-probability but high consequence risk, with possible outcomes ranging from regional to global catastrophe. However, unique amongst such global threats we have the capability of averting such disasters. Diversion approaches by either kinetic impactor or nuclear energy deposition are the two most practical technologies for mitigating hazardous near Earth asteroids. One of the greatest challenges in understanding our options is the uncertain response of asteroids to such impulsive techniques, due both to our lack of knowledge of the composition and structure of these objects as well as their highly varied nature. Predicting whether we will simply divert or break up a given object is a crucial: the weak self-gravity and inferred weak structure of typical asteroids present the strong possibility the body will fragment for modest impulses. Predictive modeling of failure and fragmentation is one important tool for such studies. In this paper we apply advances in modeling failure and fracture using Adaptive Smoothed Particle Hydrodynamics (ASPH) to understand mega-cratering on asteroids as a validation exercise, and show examples of diverting the near Earth asteroid Bennu using both a kinetic impactor and ablative blow-off due to nuclear energy deposition.

79 ASTRONOMY AND ASTROPHYSICS↗

A survey on degradation modeling, prognosis, and prognostics-driven maintenance in wind energy systems

Wind energy generation proliferated over the past decades, introducing unique challenges and opportunities for failure prediction, operation and maintenance. Decision-makers are continuously looking into new methods to infer failure mechanisms and behaviors of wind turbine components to detect and intervene in the failures before they happen. Evidently, degradation modeling and prognosis become engaging topics for researchers and practitioners to prevent catastrophic failures. Prognostics-driven approaches predict the time of failure for the components (e.g., predicting remaining useful life), which provides significant insights for scheduling of operations and maintenance activities. Integrating these prognostics-driven insights into wind farm operations and maintenance presents a substantial challenge, demanding careful consideration of numerous factors such as accessibility, crew routing, and spare part logistics. This study provides state-of-the-art review for degradation modeling, prognosis, and prognostics-driven maintenance techniques for wind energy systems. The discussed techniques align with the United Nations' sustainable development goals, in particular Goal 7 (Affordable and Clean Energy), by enhancing effectiveness and sustainability of wind energy operations. This work also showcases open research questions related to degradation modeling, prognosis, and prognostics-driven maintenance.

Altinpulluk, Nur Banu↗

Shear bands in a bulk metallic glass after large plastic deformation

A transmission electron microscopy investigation is conducted to trace shear bands in a Zr{sub 53}Cu{sub 18.7}Ni{sub 12}Al{sub 16.3} bulk metallic glass after experiencing 4% plastic deformation. Shear band initiation, secondary shear band interactions, mature shear band broadening and the interactions of shear bands with shear-induced nanocrystals are captured. Results suggest that the plasticity of the bulk metallic glass is enhanced by complex shear bands and their interactions which accommodate large plastic strain and prevent catastrophic shear band propagation.

36 MATERIALS SCIENCE↗

Impact of krypton irradiation on a single crystal tungsten: Multi-modal X-ray imaging study

Understanding microstructural and strain evolutions induced by noble gas production in the nuclear fuel matrix or plasma-facing materials is crucial for designing next generation nuclear reactors, as they are responsible for volumetric swelling and catastrophic failure. In this paper we describe a multimodal approach combining synchrotron-based nanoscale X-ray imaging techniques with atomic-scale electron microscopy techniques for mapping chemical composition, morphology and lattice distortion in a single crystal W induced by Kr irradiation. We report that Kr-irradiated single crystal W undergoes surface deformation, forming Kr containing cavities. Furthermore, positive strain fields are observed in Kr-irradiated regions, which lead to compression of underlying W matrix.

36 MATERIALS SCIENCE↗