Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “C++ analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Recommended Methods for Setting Mission Conjunction Analysis Hard Body Radii

For real-time conjunction assessment (CA) operations, computation of the Probability of Collision (P(sub c)) typically depends on the state vector, its covariance, and the combined hard body radius (HBR) of both the primary and secondary space-craft. However, most algorithmic approaches that compute the P(sub c) use generic conservatively valued HBRs that may tend to go beyond the physical limitations of both spacecraft, enough to drastically change the results of a conjunction assessment mitigation decision. On the other hand, if the attitude of the spacecraft is known and available, then a refined HBR can be obtained that could result in an improved and accurate numerically-computed P(sub c) value. The goal of this analysis is to demonstrate the various calculated P(sub c) values obtained based on a number of different HBR calculation techniques, oriented in the encounter or conjunction plane at the time of closest approach (TCA). Since in most conjunctions the secondary object is a debris object and thus orders of magnitude smaller than the primary, the greatest operational benefit is wrought by developing a better size estimate and representation for the primary object. We present an analysis that includes the attitude information of the primary object in the HBR calculation and assesses the resulting P(sub c) values for conjunction assessment decision making.

Mashiku, Alinda K.↗
DOE OSTI2023

Investigation of the Use of Dynamic Probabilistic Risk Assessment Methodologies for Identifying Digital I&C System Common Cause Failures

Digital Instrumentation and Control (I&C) systems have a key role in nuclear power plants in the upgrade of aging analog systems. Digital systems improve plant safety and reliability through features such as increased hardware reliability and stability and improved failure detection capability. There is no consensus on which of the current probabilistic risk assessment methods are most suitable for use in the reliability analysis of digital I&C systems. While the traditional event-tree/fault-tree (ET/FT) approach is still used for their reliability modeling, there are concerns regarding this approach in properly accounting for dynamic interactions among system components since potentially significant dependencies among failure events may not be identified and/or their likelihood may not be properly quantified. Dynamic methodologies are expected to provide a much more accurate representation of probabilistic evolution of the I&C systems in time due to their capability to more properly account for complex interactions than the static approach. The applicability of dynamic PRA methodologies for digital I&C system is investigated using the criteria presented in the NUREG/CR-6901, and the comparisons made in NUREG/CR-6901 are updated in light of the latest studies. The Dynamic Event Tree (DET) approach has been identified as one of the top dynamic methods when evaluated against the requirements for the reliability modeling of digital I&C systems. The DET method is a strong candidate for integration into existing PRA studies, as it bears many similarities to the traditional ET approach. In this study, the DET approach has been applied to the Plant Protection System of the APR1400 design, and the results are compared to results from its available traditional ET/FT analysis. Possible approaches to evaluate and quantify the effects of common cause failures on system safety using dynamic methods are also examined.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1999

Distribution of Candida albicans genotypes among family members

Thirty-three families (71 subjects) were screened for the presence of Candida albicans in mouthwash or stool specimens; 12 families (28 subjects) were culture-positive for this yeast. An enrichment procedure provided a twofold increase in the recovery of C. albicans from mouthwash specimens. Nine of the twelve culture-positive families had two positive members each, two families had three positive members each, and one family had four positive members. Genetic profiles were obtained by three methods: pulsed-field gel electrophoresis; restriction endonuclease analysis, and random amplification of polymorphic DNA analysis. DNA fingerprinting of C. albicans isolated from one body site three consecutive times revealed that each of the 12 families carried a distinct genotype. No two families shared the same strain, and two or more members of a family commonly shared the same strain. Intrafamily genotypic identity (i.e., each member within the family harbored the same strain) was demonstrated in six families. Genotypes of isolates from husband and wife differed from one another in five families. All three methods were satisfactory in determining genotypes; however, we concluded that restriction endonuclease analysis provided adequate resolving power.

NASA Center JSC↗
NASA NTRS2001

Support of the Laboratory for Terrestrial Physics for Dynamics of the Solid Earth (DOSE)

This final report summarizes the accomplishments during the contract period. Under the contract NVI, Inc. provided support to the VLBI group at NASA's Goddard Space Flight Center. The contract covered a period of approximately eight years during which geodetic and astrometric VLBI evolved through several major changes. This report is divided into four sections which correspond to major task areas in the contract: A) Coordination and Scheduling, B) Field System, C) Station Support, and D) Analysis and Research and Development.

Vandenberg, Nancy R.↗
DOE OSTI2025

Effect of calcite filler on carbonation behavior in a synthesized C‐S‐H binder

Widespread implementation of portland limestone cements (PLC) in industry has raised new questions about their carbonation resistance due to higher initial limestone content than ordinary portland cement. While carbonation of portland cement and each of its hydrate phases has been studied at a fundamental level, the integral role of how limestone fillers interact chemically or physically during carbonation necessitates further study. In this study, a C-S-H binder comprised of a highly reactive zeolite pozzolan and lime was used to evaluate the effect of varying calcite additions on carbonation behavior at a microstructural level. Fundamental insight into hydration kinetics and carbonation mechanisms of hydraulic binders was obtained via analysis of the C-S-H and calcite microstructure. X-ray microcomputed tomography (X-ray CT) was used to quantify microstructural changes, and the results showed a decrease in shrinkage for increased calcite dosages, with a ∼50% reduction observed for a 45% wt. calcite replacement level. Crystallographic and thermal analyses measured compositional changes in the binder and confirmed that shrinkage was related to the decalcification of C-S-H. Furthermore, the addition of calcite to the C-S-H binder effectively reduced the liquid-to-solid ratio, porosity, and amount of C-S-H present in these binders. Ultimately, these results help elucidate how the carbonation risks of PLC can be mitigated by proportioning the mixture water only to the reactive component of the binder.

C-S-H↗
DOE OSTI2025

Mid-day photomixotrophy by Roseiflexus spp. and implications for the 13 C content of hot spring cyanobacterial mats

Microbial mats inhabiting extreme environments have been studied as modern analogs of stromatolites. Mats in Octopus Spring and Mushroom Spring, Yellowstone National Park, are predominated by unicellular photoautotrophic cyanobacteria (Synechococcus spp.), which are thought to cross-feed filamentous photoheterotrophic bacteria (mainly Roseiflexus spp.), except under early morning anoxic conditions when Roseiflexus spp. have been shown to fix dissolved inorganic carbon (DIC). Transcription patterns, however, suggest that Roseiflexus spp. may perform photomixotrophy, in which DIC is incorporated together with organic compounds during the daytime. We investigated the roles played by Synechococcus spp. and Roseiflexus spp. in DIC and organic matter uptake in mid-day light and oxic mats. Mass spectrometry was used to show that 13 C-bicarbonate uptake under infrared (IR) light (utilized by anoxygenic phototrophs) or visible-minus-blue light (V-B) (used by cyanobacteria) was about two-thirds and one-third, respectively, of that incorporated in full light. Laser-ablation mass spectrometry analysis demonstrated that 13 C incorporation under V-B light was restricted to the uppermost portion of the mat, whereas 13 C incorporation under IR light was maximal in deeper mat layers. 13 C-acetate, -propionate, -lactate, and -glycolate were incorporated to an equal or greater extent under IR and full light. Incorporation of 13 C into peptides showed that both Synechococcus spp. and Roseiflexus spp. were active in DIC uptake, whereas Roseiflexus spp. exhibited greater uptake of 13 C-organic acids, especially glycolate and lactate, into peptides. Peptides of proteins of the 3-hydroxypropionate pathway were labeled. Thus, Roseiflexus spp. appears to exhibit photomixotrophy throughout the day.

Roseiflexus↗
NASA NTRS1978

Determination of liquid-phase immiscibility in the lead-zinc system

A number of different techniques in the past have yielded inconsistent equilibrium measurements of immiscibility in the Pb-Zn system above 600 C. Accurate differential thermal analysis (DTA) measurements were performed on well-homogenized samples of high-purity Pb-Zn, and they indicate that the immiscibility curve is higher than previously accepted for Zn compositions between 20 and 70 at. %. The maximum deviations observed correspond to about 20 C. Below 600 C the DTA results agree with previous results.

Trahan, J. F.↗
NASA NTRS2007

Characterization of Three Carbon- and Nitrogen-Rich Particles from Comet 81P/WILD

Comets may sample the early solar system s complement of volatile-forming elements - including C and N - more fully and reliably than do the terrestrial planets or asteroids. Until recently, all elemental analyses of unambiguously cometary material were carried out remotely. The return of the Stardust mission makes it possible to analyze documented material from P81/Wild 2 in the laboratory Wild 2 particles fragmented when they stopped in the aerogel collectors. We have studied three fragments thought to be rich in C and N by using several techniques: FTIR to characterize organic matter; synchrotron-induced x-ray fluorescence (SXRF) to determine Fe and certain element/Fe ratios; SEM to image sample morphology and to detect semiquantitatively Mg, Al, Si, Ca, and Fe; and nuclear reaction analysis (NRA) to measure C, N, O, and Si.

Gallien, J.-P.↗
DOE OSTI2020

Examination of synthetic gas puff imaging diagnostic data from a gyrokinetic turbulence code

A synthetic gas puff imaging (GPI) diagnostic has been developed for the purpose of validating the three-dimensional gyrokinetic turbulence code XGC. The synthetic diagnostic is described and applied to XGC simulations of two Alcator C-Mod discharges. The turbulence characteristics deduced from the resulting simulated GPI frames, using analysis techniques similar to those applied to experimental data, are compared with locally derived characteristics extracted directly from the XGC output. The comparison of the two is shown to be potentially impacted by misalignment between the GPI view and the magnetic field, the dependence of the light emission on the electron density and temperature, and spatial and temporal variations in the neutral gas cloud induced by the turbulent plasma fluctuations. We conclude that quantitative and, in some cases even qualitative, validation of turbulence simulations need to account for these effects. While we cannot directly compare our results with experimental data due to the absence of high quality GPI data from the shots and times simulated by XGC, we do relate the overall characteristics obtained from the synthetic GPI analysis to published Alcator C-Mod GPI data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Mammalian complex III heme dynamics studied with pump-probe spectroscopy and red light illuminations

The electronic or molecular mechanisms which initiate photobiomodulation (PBM) in cells are not yet fully understood. Porcine complex III (C-III) of the electron transport chain was characterized with transient absorption spectroscopy (TAS). Then we applied our recently developed continuous wave laser coupled TAS procedure (CW-TAS) to investigate the effect of red light irradiances on the heme dynamics of C-III in its c 1 reduced state. The time constants associated with the axial ligand photodissociation were found to be 3.3 ± 0.3 ps for the oxidized state and 4.9 ± 0.4 ps for the c 1 reduced state. The analysis of the CW-TAS procedure yielded no significant changes in the C-III heme dynamics. We rule out the possibility of 635 nm CW light at 4.7 mW/cm 2 inducing a PBM effect on the heme dynamic of C-III, specifically with the photodissociation of its axial ligand.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1982

Surface chemistry, microstructure and friction properties of some ferrous-base metallic glasses at temperatures to 750 C

X-ray photoelectron spectroscopy analysis, transmission electron microscopy, diffraction studies, and sliding friction experiments were conducted with ferrous-base metallic glasses in sliding contact with aluminum oxide at temperatures from room to 750 C in a vacuum of 30 nPa. The results indicate that there is a significant temperature influence on the friction properties, surface chemistry, and microstructure of metallic glasses. The relative concentrations of the various constituents at the surface of the sputtered specimens were very different from the normal bulk compositions. Contaminants can come from the bulk of the material to the surface upon heating and impart boric oxide and silicon oxide at 350 C and boron nitride above 500 C. The coefficient of friction increased with increasing temperature to 350 C. Above 500 C the coefficient of friction decreased rapidly. The segregation of contaminants may be responsible for the friction behavior.

Miyoshi, K.↗
NASA NTRS2010

Temperature Dependence of Thin Film Spiral Inductors on Alumina Over a Temperature Range of 25 to 475 C

In this paper, we present an analysis of inductors on an Alumina substrate over the temperature range of 25 to 475 C. Five sets of inductors, each set consisting of a 1.5, 2.5, 3.5, and a 4.5 turn inductor with different line width and spacing, were measured on a high temperature probe station from 10 MHz to 30 GHz. From these measured characteristics, it is shown that the inductance is nearly independent of temperature for low frequencies compared to the self resonant frequency, the parasitic capacitances are independent of temperature, and the resistance varies nearly linearly with temperature. These characteristics result in the self resonant frequency decreasing by only a few percent as the temperature is increased from 25 to 475 C, but the maximum quality factor decreases by a factor of 2 to 3. These observations based on measured data are confirmed through 2D simulations using Sonnet software.

Ponchak, George E.↗
DOE OSTI2024

Characterization of pitch carbon coating properties affecting the electrochemical behavior of silicon nanoparticle lithium-ion battery anodes

Silicon is an exciting material for next-generation lithium-ion battery anodes, due to its high theoretical capacity and availability, but its widespread implementation has been limited by extensive volume changes during cycling that causes mechanical damage and limits cycle life. One approach to mitigating these deleterious effects while still maintaining silicon's benefits is the addition of a pitch carbon coating to nanometer-sized silicon particles. Here, in this study, we present characterization of pitch-coated silicon electrodes without annealing and annealed at 700 °C and 1000 °C to determine the optimum temperature treatment, as well as pitch-only and silicon-only electrodes with and without annealing to elucidate the impacts of each component on early electrochemical behavior. Using Fourier transform infrared and Raman spectroscopies, atomic force and scanning spreading resistance microscopy, and electrochemical analysis, we find 700 °C to be the optimal annealing temperature, as amorphous carbon is created, which improves conductivity prior to cycling and facilitates ion storage during cycling that increases capacity. We also present in situ Raman spectroscopy data demonstrating the heterogeneous aging that occurs across the electrode surface during cycling.

25 ENERGY STORAGE↗
DOE OSTI2021

Mathematical analysis of laboratory microbial experiments demonstrating deterministic chaotic dynamics

Presented is a system of four ordinary differential equations and a mathematical analysis of microbiological experiments in a four-component chemostat—nutrient n, rods r, cocci c, and predators p. The analysis is consistent with the conclusion that previous experiments produced features of deterministic chaotic and classical dynamics depending on dilution rate. The surrogate model incorporates as much experimental detail as possible, but necessarily contains unmeasured parameters. The objective is to understand better the differences between model simulations and experimental results in complex microbial populations. The key methodology for simulation of chaotic dynamics, consistent with the measured dilution rate and microbial volume averages, was to cause the preference of p for r vs. c to vary with the r and c concentrations, to make r more competitive for nutrient than c, and to recycle some dying p biomass, leading to a modified version of the Monod kinetics model. Our mathematical model demonstrated that the occurrence of chaotic dynamics requires a predator, p, preference for r versus c to increase significantly with increases in r and c populations. Also included is a discussion of several generalizations of the existing model and a possible involvement of the minimum energy dissipation principle. This principle appears fundamental to thermodynamic systems including living systems. Several new experiments are suggested.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1991

Addition Curing Thermosets Endcapped with 4-Amino (2.2) Paracyclophane

A new family of addition curing polyimides were prepared that contained 4-amino (2.2)-paracyclophane as the endcap. An improved synthesis of the endcap 4-amino-(2.2) cyclophane was accomplished increasing the yield to 60 percent and simplifying the procedure. DSC and rheological analysis of endcapped polyimide oligomers confirmed that the onset for polymerization of the ethylene bridge was 250 C. C-13 CP/MAS NMR was used to determine the structural changes of the oligomers after thermal treatment. The cyclophane capped polyimides were successfully compression molded to form void free neat resin specimens. Tg's as high as 353 C were obtained by thermomechanical analysis for postcured samples. Preliminary thermal stability studies suggest that these resins have a high onset of decomposition ranging from 549 to 567 C.

Waters, John F.↗
DOE OSTI2020

Trivalent f-Element Squarates, Squarate-Oxalates, and Cationic Materials, and the Determination of the Nine-Coordinate Ionic Radius of Cf(III)

The synthesis, structure, and solid-state UV–vis–NIR spectroscopy of four new f-element squarates, M 2 (C 4 O 4 ) 3 (H 2 O) 4 (M = Eu, Am, Cf) and Sm(C 4 O 4 )(C 4 O 3 OH)(H 2 O) 2 ·0.5H 2 O, four new cationic lanthanide squarate chlorides, [M 4 (C 4 O 4 ) 5 (H 2 O) 12 ]Cl 2 ·5H 2 O (M = Eu, Dy, Ho Er), and two new actinide squarate oxalates, M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 (M = Am, Cf), are presented. All of the metal centers are trivalent. Single-crystal X-ray diffraction analysis reveals that M 2 (C 4 O 4 ) 3 (H 2 O) 4 and Sm(C 4 O 4 )(C 4 O 3 OH)(H 2 O) 2 ·0.5H 2 O have a two-dimensional sheet structure constructed from MO 7 (H 2 O) 2 monocapped square-antiprismatic (coordination number (CN) = 9) metal centers and SmO 6 (H 2 O) 2 square-antiprismatic (CN = 8) metal centers, respectively, whereas M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 have a three-dimensional (3D) structure constructed from MO 7 (H 2 O) 2 monocapped square-antiprismatic (CN = 9) metal centers. Additionally, the cationic framework materials [M 4 (C 4 O 4 ) 5 (H 2 O) 12 ]Cl 2 ·5H 2 O have a 3D structure constructed from two crystallographically unique MO 5 (H 2 O) 3 square-antiprismatic (CN = 8) metal centers. In these structures, the squarate ligands bind to the metal centers with varying coordination modes and denticities. The results of this study provide another example of the nonparallel chemistry between the lanthanides and transplutonium elements. From the crystallographic data for the isotypic series M 2 (C 4 O 4 ) 3 (H 2 O) 4 (M = La–Nd, Sm, Eu) and the linear regression fit to a plot of the unit cell volume as a function of the cube of the ionic radius, the nine-coordinate ionic radius of Cf 3+ was determined to be 1.127 ± 0.003 Å. Lastly, computational analysis of the americium and californium complexes M 2 (C 4 O 4 ) 3 (H 2 O) 4 and M 2 (C 4 O 4 ) 2 (C 2 O 4 )(H 2 O) 4 reveals three important attributes: (i) the 5f orbitals are nonbonding in all cases, with the bonding differences occurring with the empty 6d orbitals; (ii) the Cf complexes exhibit more covalent character than their Am counterparts; and (iii) there is more covalent character in the squarate-oxalate complexes than in the squarate complexes.

Crystallography↗
NASA NTRS1999

Differential Scanning Calorimetry and Evolved Gas Analysis of Hydromagnesite

Volatile-bearing minerals (e.g., Fe-oxyhydroxides, phyllosilicates, carbonates and sulfates) may be important phases on the surface of Mars. In order to characterize these phases the Thermal and Evolved Gas Analyzer (TEGA) flying on the Mars'98 lander will perform analyses on surface samples from Mars. Hydromagnesite [Mg5(CO3)4(OH)2.4H2O] is considered a good standard mineral to examine as a Mars soil analog component because it evolves both H2O and CO2 at temperatures between 0 and 600 C. Our aim here is to interpret the DSC signature of hydromagnesite under ambient pressure and 20 sccm N2 flow in the range 25 to 600 C. The DSC curve for hydromagnesite under the above conditions consists of three endothermic peaks at temperatures 296, 426, and 548 and one sharp exotherm at 511 C. X-ray analysis of the sample at different stop temperatures suggested that the exotherm corresponded with the formation of crystalline magnesite. The first endotherm was due to dehydration of hydromagnesite, and then the second one was due to the decomposition of carbonate, immediately followed by the formation of magnesite (exotherm) and its decomposition to periclase (last endotherm). Evolution of water and CO2 were consistent with the observed enthalpy changes. A library of such DSC-evolved gas curves for putative Martian minerals are currently being acquired in order to facilitate the interpretation of results obtained by a robotic lander.

Lauer, H. V., Jr.↗