Influence of copper on nickel-based catalysts in the conversion of glycerol
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The presence of fluoride anions in the synthesis gel leads to zeolite BEA with high hydrothermal stability. This longer lifetime is caused by a lower concentration of internal silanol defects that are sites of the initial framework hydrolysis eventually destroying the lattice structure. The lifetime of these zeolites was the higher the lower the concentration of framework bridging hydroxyl groups that form hydronium ions was. While lattice hydrolysis was initiated at defect sites in all cases, the role of defects became less important as the concentration of hydronium ions increased. At higher concentration of hydrated hydronium ions, the presence of water associated with the hydrated hydronium ions limits the useful lifetime of zeolite catalysts in water. For such materials, the selective hydrophobization of the external surface extends the lifetime. Acknowledgments: S.P. and M.A.D. acknowledge support by the Materials Synthesis and Simulation Across Scales (MS3 Initiative) conducted under Laboratory Directed Research & Development Program at PNNL. H.S. and H.W. were supported by the Chemical Transformation Initiative (CTI) conducted under Laboratory Directed Research & Development Program at PNNL. J.A.L. was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.
The reactivity of Ru/Al2O3 catalysts in the hydrogenation of CO/CO2 gas mixtures is investigated in this work. Accordingly kinetic measurements are carried out at process conditions of industrial interest (i.e., at high COx per-pass conversion and with concentrated COx/H2 streams), and the surface species on the catalyst are investigated through transient DRIFTS-MS analysis. The catalyst shows gradual deactivation when the methanation is carried out in the presence of CO in the gas feed at low temperatures (200-300 °C). However, stable performance is observed at higher temperatures, showing CH4 yields even higher than those observed during methanation of a pure CO2 feed. The catalyst deactivation at low temperature is reversible as thermal treatments at temperatures above 350 °C are able to restore the catalytic activity. DRIFTS-MS experiments revealed that CO2 methanation involves a reaction pathway where CO2 is adsorbed as bicarbonate on Al2O3 and successively hydrogenated to methane on Ru, passing through formate and carbonyl intermediates. In the presence of CO at low temperatures, the catalyst shows a higher CO coverage of the Ru sites, a larger formate coverage of alumina sites and the presence of adsorbed carbonaceous species, identified as hydrocarbon and carboxylate species. Carboxylates remain on the surface, effectively blocking adsorption sites thus leading to catalyst deactivation. However, working above the carboxylate decomposition temperature ensures a clean catalyst surface, resulting in stable and high performance in CO/CO2 methanation. Catalyst preparation, characterization and testing activity were carried out with a joint project between the Politecnico di Milano and the Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), which is gratefully acknowledged. The authors gratefully acknowledge the financial support of the DRIFTS experiments by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division. L.F. also acknowledges the Pacific Northwest National Laboratory (PNNL) for the financial support during his permanence as visiting student.
In this paper, changes in surface Fermi-level of Si and GaAs, caused by doping and cleaning, are investigated by Auger electron spectroscopy. Based on the Auger voltage contrast, we compared the Auger transition peak energy but with higher accuracy by using a more accurate detector and an improved peak position determination method. For silicon, a peak shift as large as 0.46 eV was detected when comparing a cleaned p-type and n-type wafer, which corresponds rather well with the theoretical difference in Fermi-level. If no cleaning was applied, the peak position did not differ significantly for both wafer types, indicating Fermi-level pinning in the band gap. For GaAs, peak shifts were detected after cleaning with HF and (NH4)2S-solutions in an inert atmosphere (N2-gas). Although the (NH4)2S-cleaning in N2 is very efficient in removing the oxygen from the surface, the observed Ga- and As-peak shifts are smaller than those obtained after the HF-cleaning. It is shown that the magnitude of the shift is related to the surface composition. After Si-deposition on the (NH4)2S-cleaned surface, the Fermi-level shifts back to a similar position as observed for an as-received wafer, indicating that this combination is not successful in unpinning the Fermi-level of GaAs. This work has been funded by J.D.'s PhD fellowship of the Fund of Scientific Research-Flanders (FWO-V) (Dossier No. 11U4516N). P.H. acknowledges support from Becas Chile-CONICYT. This research was also supported by the FWO Odysseus Program, the Belgian Hercules Stichting with the Project No. Her/08/25 and AKUL/13/19 and the KU Leuven project GOA "Fundamental challenges in Semiconductor Research". The authors would also like to thank Bastiaan Opperdoes and Ludwig Henderix for technical support. The work was supported by the U.S. Department of Energy (USDOE), Office of Science, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, and performed in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). Battelle operates PNNL for the USDOE under contract DE-AC05-76RL01830.
Bulk tungsten trioxide (WO3) and rhenium trioxide (ReO3) share very similar structures but display different electronic properties. WO3 is a wide bandgap semiconductor while ReO3 is an electronic conductor. With the advanced molecular beam epitaxy techniques, it is possible to make heterostructures comprised of layers of WO3 and ReO3. These heterostructures might display reactivity different than pure WO3 and ReO3. The interactions of two probe molecules (hydrogen and methanol) with the (001) surfaces of WO3, ReO3, and two heterostructures ReO3/WO3 and WO3/ReO3 were investigated at the density functional theory level. Atomic hydrogen prefers to adsorb at the terminal O1C sites forming a surface hydroxyl on four surfaces. Dissociative adsorption of a hydrogen molecule at the O1C site leads to formation of a water molecule adsorbed at the surface M5C site. This is thermodynamically the most stable state. A thermodynamically less stable dissociative state involves two surface hydroxyl groups O1CH and O2CH. The interaction of molecular hydrogen and methanol with pure ReO3 is stronger than with pure WO3 and the strength of the interaction substantially changes on the WO3/ReO3 and ReO3/WO3 heterostructures. The reaction barriers for decomposition and recombination reactions are sensitive to the nature of heterostructure. The calculated adsorption energy of methanol on WO3(001) of -65.6 kJ/mol is consistent with the previous experimental estimation of -67 kJ/mol. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.
In the present work, thiophene hydrodesulphurization (HDS) over the Mo-edge, the S-edge, and the Mo-S connection edge of MoS 2 catalyst with 50% sulfur coverage was studied using first-principles based microkinetic modeling. Two parallel HDS routes, i.e., direct desulfurization (DDS) and hydrogenation (HYD) were taken into account. It has been found that the major reaction route of thiophene HDS on the Mo- and the Mo-S edges is temperature dependent. In the low temperature range of 500~600 K, the HYD route is dominant, leading to the C 4 H 8 formation. As the temperature increases, the DDS route becomes competitive with the HYD route. At the temperature above 650 K, the DDS route will be the dominant HDS reaction route on the Mo- and the Mo-S edges. While the DDS route that leads to the formation of C4H6 is the major thiophene HDS reaction route on the S-edge in the entire temperature range of 500~750 K. The microkinetic modeling results show the overall HDS activity on the S-edge is lower than it on the Mo- and the Mo-S edges. The Mo-S edge also provides a preferential reaction pathway, which facilitates 2-hydrothiophene migration from the Mo-edge to the S-edge, followed by remaining elementary steps with lower activation barriers in the DDS route. The work was financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, 21407007 and 91534201). The computing time was granted by a scientific theme user proposal in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington. Part of computing time was provided the National Energy Research Scientific Computing Center (NERSC). D. Mei is supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.
Not Available
Not Available
The dynamics of the guest molecules CO2 and CH4 in p-tert-butylalix[4]arene (TBC4) motion was studied from 100 K to 400 K using the velocity autocorrelation approach. The rattling motion of the CH4 guest molecules exhibit an increase in the Einstein frequency with increasing temperature as has been observed experimentally and in simulations for some rare gas clathrate systems. The CH4 molecule shows an increase from 75 cm-1 at 100 K to 91 cm-1 at 400 K. The CO2 rattling motion exhibits a single peak and less temperature dependence going from 76 cm-1 at 100 K to 72 cm-1 at 400 K. The rotational spectra for CO2 exhibit two peaks at 100 K with the higher frequency peak shifting to lower frequency with increasing temperature. The computed rotational Einstein frequencies go from 86 cm-1 at 100 K to 71 cm-1 at 400 K. The temperature dependent Gibbs absorption free energies of the guest molecules CO2 and CH4 in TBC4 have also been studied at 1 bar using thermodynamic integration from 10 K to 400 K. As expected, the simulated absorption free energy for CO2 is greater at all temperatures than for CH4. At 10 K, the simulated values of -11.4 kcal/mol and -8.4 kcal/mol for CO2 and CH4, respectively, while at 300 K the values are -5.4 kcal/mol and -4.4 kcal/mol. This work was performed at the Pacific Northwest National Laboratory (PNNL) and was supported by the Division of Chemical Sciences, Office of Basic Energy Sciences, U.S. Department of Energy (DOE). PNNL is operated by Battelle for the DOE.
The hydration and ion pair structure of Cl- ion in aqueous cesium chloride solutions at 0.5, 6 and 11 mol/kg (H2O) has been studied using Extended X-ray Absorption Fine Structure (EXAFS) at the Cl K-edge. The co-refinement of multiple EXAFS datasets shows the hydration structure of the free Cl- ion is consistent with previously reported studies. In concentrated solution the Cl- ion is strongly associated with the cation forming contact ion pairs with 1.6 and 2.8 Cs ions in 6 and 11 mol/kg aqueous CsCl, respectively. The fact that the degree of ion pairing of Cs-Cl is higher than that of both aqueous RbCl and RbBr at the same concentration is an interesting result as it deviates from the Collins’s law of matching water affinities. The reported Cs-Cl ion-pair structure provides a basis for the development and testing of improved interaction potentials leading to more realistic structures from molecular dynamics (MD) simulations. ACKNOWLEDGEMENT VTP was supported by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 103.99-2013.19. Work by JLF was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The PNC/XSD facilities at the Advanced Photon Source, and research at these facilities, are supported by DOE/BES, the Canadian Light Source and its funding partners, the University of Washington, and the Advanced Photon Source. Use of the Advanced Photon Source, an Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory, was supported by the DOE under Contract No. DE-AC02-06CH11357.
Tin oxide (SnOx) formation on tin-based electrode surfaces during CO2 electrochemical reduction can have a significant impact on the activity and selectivity of the reaction. In the present study, density functional theory (DFT) calculations have been performed to understand the role of SnOx in CO2 reduction using a SnO monolayer on the Sn(112) surface as a model for SnOx. Water molecules have been treated explicitly and considered actively participating in the reaction. The results showed that H2O dissociates on the perfect SnO monolayer into two hydroxyl groups symmetrically on the surface. CO2 energetically prefers to react with the hydroxyl, forming a bicarbonate (HCO3(t)*) intermediate, which can then be reduced to either formate (HCOO*) by hydrogenating the carbon atom or carboxyl (COOH*) by protonating the oxygen atom. Both steps involve a simultaneous C-O bond breaking. Further reduction of HCOO* species leads to the formation of formic acid in the acidic solution at pH < 4, while the COOH* will decompose to CO and H2O via protonation. Whereas the oxygen vacancy (VO) in the monolayer maybe formed by the reduction of the monolayer, it can be recovered by H2O dissociation, resulting in two embedded hydroxyl groups. However, the hydroxylated surface with two symmetric hydroxyls is energetically more favorable for CO2 reduction than the hydroxylated VO surface with two embedded hydroxyls. The reduction potential for the former has a limiting-potential of -0.20 V (RHE), lower than that for the latter (-0.74 V (RHE)). Compared to the pure Sn electrode, the formation of SnOx monolayer on the electrode under the operating conditions promotes CO2 reduction more effectively by forming surface hydroxyls, thereby, providing a new channel via COOH* to the CO formation, although formic acid is still the major reduction product. The work was supported in part by National Natural Sciences Foundation of China (Grant #21373148 and #21206117). The High Performance Computing Center of Tianjin University is acknowledged for providing services to the computing cluster. CC acknowledges the support of 24 China Scholarship Council (CSC). QG acknowledges the support of NSF-CBET program (Award no. CBET-1438440). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. The computations were performed in part using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington.
Not Available
Not Available
Not Available
In the first part of this paper, an experimental contact angle study of the fresh and Cu2+ activated sphalerite-ZnS surface as well as the covellite-CuS (001) surface is reported describing the increased hydrophobic character of the surface during Cu2+ activation. In addition to these experimental results, the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite- CuS2 (100), and covellite-CuS (001) surfaces were examined using Molecular Dynamics Simulation (MDS). Our MDS results on the behavior of interfacial water at the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite-CuS2 (100), and covellite-CuS (001) surfaces include simulated contact angles, water number density distribution, water dipole orientation, water residence time, and hydrogen-bonding considerations. The copper content at the Cu2+ activated sphalerite surface seems to account for the increased hydrophobicity as revealed by both experimental and MD simulated contact angle measurements. The relatively greater hydrophobic character developed at the Cu2+ activated sphalerite surface and at the copper-zinc sulfide surface has been described by MDS, based on the structure of interfacial water and its dynamic properties. L.X.D. acknowledges funding from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.
Not Available
Small gas molecules working as good capping agents play important roles in controlling the morphologies and surface structures of the metal nanocrystals. In present work, the thermodynamic and kinetic roles of H2 molecule played on the morphology of Co nanocrystal were systematically studied based on density functional theory (DFT). The Gibbs surface free energies (?) of Co(100), Co(110) and Co(111) under different hydrogen surface coverages were investigated by ab initio thermodynamics, based on which i) the phase diagrams of stable H coverage on each plane were obtained; ii) the morphology evolutions of the Co nanocrystals with various surface hydrogen coverages were further predicted by Wulff construction. It was revealed that addition of H2 could change the facet stability generating diverse morphological Co nucleus. The kinetic role of H2 was further explored by DFT during adatom Co surface diffusions under different H coverages (?H), which suggested that except for Co(100) at ?H of 0.56 ML, the surface H would hinder Co surface diffusions. The projected density of state (PDOS) gave a deeper insight that the electronic structures of the Co adatom could be alerted by addition of the surface H, which thereby affected its surface diffusion ability. X. Wang, N. Liu, Q. Zhang, X. Liang, and B. Chen were financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, and 91534201). D. Mei was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. Computing time was granted by the facility user proposal grand challenge of computational catalysis of the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research.