Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Agreements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Relationships between field-aligned currents, electric fields and particle precipitation as observed by dynamics Explorer-2

The relationships between field-aligned currents, electric fields, and particle fluxes are determined using observations from the polar orbiting low-altitude satellite Dynamics Explorer-2. It is shown that the north-south electric field and the east-west magnetic field components are usually highly correlated in the field-aligned current regions. This proportionality observationally proves that the field-aligned current equals the divergence of the height-integrated ionospheric Pedersen current in the meridional plane to a high degree of approximation. As a general rule, in the evening sector the upward field-aligned currents flow in the boundary plasma sheet region and the downward currents flow in the central plasma sheet region. The current densities determined independently from the plasma and magnetic field measurements are compared. Although the current densities deduced from the two methods are in general agreement, the degree and extent of the agreement vary in individual cases.

Sugiura, M.↗

A finite difference solution for the propagation of sound in near sonic flows

An explicit time/space finite difference procedure is used to model the propagation of sound in a quasi one-dimensional duct containing high Mach number subsonic flow. Nonlinear acoustic equations are derived by perturbing the time-dependent Euler equations about a steady, compressible mean flow. The governing difference relations are based on a fourth-order, two-step (predictor-corrector) MacCormack scheme. The solution algorithm functions by switching on a time harmonic source and allowing the difference equations to iterate to a steady state. The principal effect of the non-linearities was to shift acoustical energy to higher harmonics. With increased source strengths, wave steepening was observed. This phenomenon suggests that the acoustical response may approach a shock behavior at at higher sound pressure level as the throat Mach number aproaches unity. On a peak level basis, good agreement between the nonlinear finite difference and linear finite element solutions was observed, even through a peak sound pressure level of about 150 dB occurred in the throat region. Nonlinear steady state waveform solutions are shown to be in excellent agreement with a nonlinear asymptotic theory.

Hariharan, S. I.↗

System analysis for the Huntsville Operational Support Center distributed computer system

A simulation model was developed and programmed in three languages BASIC, PASCAL, and SLAM. Two of the programs are included in this report, the BASIC and the PASCAL language programs. SLAM is not supported by NASA/MSFC facilities and hence was not included. The statistical comparison of simulations of the same HOSC system configurations are in good agreement and are in agreement with the operational statistics of HOSC that were obtained. Three variations of the most recent HOSC configuration was run and some conclusions drawn as to the system performance under these variations.

Ingels, E. M.↗

A new technique for measuring gas conversion factors for hydrocarbon mass flowmeters

A technique for measuring calibration conversion factors for hydrocarbon mass flowmeters was developed. It was applied to a widely used type of commercial thermal mass flowmeter for hydrocarbon gases. The values of conversion factors for two common hydrocarbons measured using this technique are in good agreement with the empirical values cited by the manufacturer. Similar agreements can be expected for all other hydrocarbons. The technique is based on Nernst theorem for matching the partial pressure of oxygen in the combustion product gases with that in normal air. It is simple, quick and relatively safe--particularly for toxic/poisonous hydrocarbons.

Singh, J. J.↗

Wall interference correction improvements for the ONERA main wind tunnels

This paper describes improved methods of calculating wall interference corrections for the ONERA large windtunnels. The mathematical description of the model and its sting support have become more sophisticated. An increasing number of singularities is used until an agreement between theoretical and experimental signatures of the model and sting on the walls of the closed test section is obtained. The singularity decentering effects are calculated when the model reaches large angles of attack. The porosity factor cartography on the perforated walls deduced from the measured signatures now replaces the reference tests previously carried out in larger tunnels. The porosity factors obtained from the blockage terms (signatures at zero lift) and from the lift terms are in good agreement. In each case (model + sting + test section), wall corrections are now determined, before the tests, as a function of the fundamental parameters M, CS, CZ. During the windtunnel tests, the corrections are quickly computed from these functions.

Vaucheret, X.↗

An intercomparison of NEL and DHL water flow facilities using a twin orifice plate flowmeter assembly

A 205 mm transfer standard orifice plate meter assembly, consisting of two orifice plates in series separated by a length of pipe containing a flow straightener, was calibrated in two water flow facilities. Results show that the agreement in the characteristics of such a differential pressure transfer standard package is within 0.17% over a 10:1 range from flow rates of approximately 8 to 80 l/sec. When the range over which the comparison was made was limited to that for which the calibration graphs gave straight lines, the agreement is 0.1% in 3 of the 4 calibrations (0.17% in the fourth).

Dejong, J.↗

NASTRAN Structural Model for the Large 64-meter Antenna Pedestal, Part 1

Static analysis and a computer structural model for the large 64-m antenna pedestal are developed using the MSC version of the NASTRAN program. This model was necessary to conduct a variety of hydrostatic bearing rehabilitation studies. The results obtained from the model show that the top surface deflections due to pad loads are in good agreement with the results previously obtained from a simplified "shortcut' analytical model, and also in agreement with field measurements. In addition, the displacement and force distributions as well as the state of stress and strain are obtained.

Chian, C. T.↗

A quantitative model of geomagnetic activity

A quantitative model of geomagnetic activity is developed and utilized to investigate the causes of the diurnal, seasonal, and IMF sector variations in the AL index records. This auroral index was chosen for study because of its high sensitivity to the strength of the westward electrojet and, hence, magnetospheric substorm activity. After the introduction of corrections for processes not related to substorms, ability of the function Bs to the 0.85th power x V squared to produce the observed variations in AL was examined. The annual variation of Bs was determined by superposing the contributions to Bs due to the inclination of the magnetic axis (Russell and McPherron, 1973) on an empirical mean distribution of Bz. V was assumed constant. The predicted values of ALc have been compared with observed averages for 9 years of solar cycle 20. The predicted annual variation of ALc for toward and away sectors are in good agreement with observation. While the predicted semi-annual component of ALc is in phase with observation, it is less than half the observed amplitude. The predicted diurnal variation of ALc for June is in satisfactory agreement with observation.

Holzer, R. E.↗

A comparison of experimental and computer model results on the charge-exchange plasma flow from a 30 cm mercury ion thruster

Ion thrusters can be used in a variety of primary and auxiliary space-propulsion applications. A thruster produces a charge-exchange plasma which can interact with various systems on the spacecraft. The propagation of the charge-exchange plasma is crucial in determining the interaction of that plasma with the spacecraft. This paper compares experimental measurements with computer model predictions of the propagation of the charge-exchange plasma from a 30 cm mercury ion thruster. The plasma potentials, and ion densities, and directed energies are discussed. Good agreement is found in a region upstream of, and close to, the ion thruster optics. Outside of this region the agreement is reasonable in view of the modeling difficulties.

Gabriel, S. B.↗

Boundary integral equation method calculations of surface regression effects in flame spreading

A solid-phase conduction problem that is a modified version of one that has been treated previously in the literature and is applicable to flame spreading over a pyrolyzing fuel is solved using a boundary integral equation (BIE) method. Results are compared to surface temperature measurements that can be found in the literature. In addition, the heat conducted through the solid forward of the flame, the heat transfer responsible for sustaining the flame, is also computed in terms of the Peclet number based on a heated layer depth using the BIE method and approximate methods based on asymptotic expansions. Agreement between computed and experimental results is quite good as is agreement between the BIE and the approximate results.

Altenkirch, R. A.↗

SAGE - European ozonesonde comparison

Between February and December 1979, 30 correlative comparisons were conducted of ozone profiles derived from the satellite sensor SAGE and those derived from balloon-borne ozonesondes launched in Europe. The mean absolute differences between SAGE and the European sondes when ozone mixing ratio is used as the basis of comparison are listed, and ozone comparisons made at four stations in Europe are plotted as ozone mixing ratio versus altitude. The agreement is considered quite reasonable. Also shown is an April 2, 1979 Garmisch comparison where the time and space differences were very small. The agreement is found to be remarkable. For example, the ratio of SAGE to ozonesonde values at 13 out of 17 levels between 12.5 and 28.5 km lies in the range 0.92-1.06.

Reiter, R.↗

Catalytic recombination of nitrogen and oxygen on iron-cobalt-chromia spinel

The energy-transfer catalytic recombination coefficient for nitrogen and oxygen recombination on iron-cobalt-chromia spinel is inferred from stagnation-point heat flux measurements in dissociated arc-jet flow. This material was coated on several Space Shuttle Orbiter thermal protection tiles. The resulting coefficients are correlated with an Arrhenius model for convenience, and these expressions may be used to account for catalytic recombination in predictions of the heat flux on the spinel-coated tiles flown on several Space Shuttle Orbiter flights. The results are compared with those inferred by Rakich, Stewart, and Lanfranco from an Orbiter flight and arc-jet experiments. Good agreement is obtained for oxygen recombination, but agreement for nitrogen is poor.

Scott, C. D.↗

The observation of a coronal transient directed at earth

The paper reports the observation of a large coronal transient that can only be interpreted as a three-dimensional structure. Its form is one which has not been observed before: a gradually expanding, sun-centered disk of excess brightness, whose projected radius increased from 4 to 8 solar radii during 0832-0958 UT on November 27, 1979. This earth-directed transient was the source of an interplanetary shock wave that reached ISEE 3 at 0649 UT, November 30, and earth at 0738 UT, November 30. Fitting the shock speed at ISEE 3 and the average transit speed from the sun to ISEE 3 to a power law of the form V = (V sub 0)(r exp -n), it is found that V sub 0 = 1980 km/s and n = 0.294, in good agreement with shock wave models. The shock speed predicted by the power law at 10 solar radii is 1000 km/s, in good agreement with the estimated frontal speed of the transient.

Howard, R. A.↗

Discordance of exercise thallium testing with coronary arteriography in patients with atypical presentations

Eighty-one patients with diagnostically difficult clinical presentations suggesting coronary artery disease underwent symptom-limited maximal-exercise treadmill testing (ETT) and exercise radionuclide scanning with thallium-201 followed by coronary angiography. Results showed that in nearly half of the patients (47%) these tests were in agreement, while either exercise thallium or ETT was positive in 94% of patients with coronary artery disease. It was found that agreement between exercise thallium and ETT tests predicted disease in 92% of the instances or excluded disease in 82% of the instances. It is concluded that despite frequent discord between these two tests in 53% of the cases, a significant gain in exclusive diagnostic capability is realized when applied to a patient population anticipated to have a disease prevalence equal to the 67% encountered in this study.

Bungo, M. W.↗

Shock diffraction computations over complex structures

This work contains the results of a study aimed at the development of two- and three-dimensional numerical procedures for computing the flowfield generated by the interaction of a blast wave and a rigid body. A number of numerical procedures were applied to two-dimensional problems including both implicit and explicit algorithms. Each was tried on the blast wave-cylinder interaction problem. MacCormack's (1969) method with added fourth-order dissipation yielded the best results and was then applied to the blast wave-truck interaction problems in two dimensions. MacCormack's method was also used in three dimensions to determine the flowfield that results when a blast wave strikes a rectangular parallelepiped at an arbitrary angle. Both the twoand three-dimensional computations were compared with experiments in a number of ways. Two dimensional density contours show qualitative agreement for shock front location and Mach stem formation with spark shadowgraphs taken in a shock tube. Pressure-time histories indicate good quantitative agreement between theory and experiment both in two- and three-dimensions.

Mark, A.↗

Objective analysis and assimilation of observational data from FGGE

An objective analysis scheme is presented for the assimilation of meteorological data in which wind, geopotential height, and relative humidity are analyzed on mandatory pressure levels, and surface pressure and temperature are reduced to sea level for analysis. The present analysis/forecast system demonstrates a reasonable degree of forecast skill over the Northern Hemisphere for an ensemble of five-day integrations during the First Special Observing Period of the First GARP Global Experiment (FGGE) The vertical motion field shows outstanding agreement with the large scale synoptic pattern for the sample analysis presented, and the mean meridional circulation portrayed in the FGGE analysis is in close agreement with observational estimates.

Baker, W. E.↗

Lidar- and balloon-borne particle counter comparisons following recent volcanic eruptions

Balloon-borne particle counter measurements at Laramie, Wyoming (41 deg N) are used to calculate the expected lidar backscatter at 0.694 micron wavelength from July 1979 to February 1982, a period which included at least four detectable perturbations of the stratospheric aerosol layer due to volcanic eruptions. These calculations are compared with lidar measurements conducted at Garmisch-Partenkirchen (47.5 deg N) during the same period. While the agreement is generally good using only the main mode in the particle size distribution (radius about 0.07 micron) during approximately the first 6 months following a major volcanic eruption, a measured secondary mode near 1 micron radius, when included, improves the agreement. Calculations of the expected backscatter at 25-30 km reveal that substantial number of particles diffuse into this high altitude region about 7 months after a major eruption, and these particles should be taken into account when normalizing lidar at these altitudes.

Hofmann, D. J.↗

Prediction of an axisymmetric combusting flow

A numerical model for turbulent, recirculating combusting flow is developed and applied to a research combustor. The model is based on the time-averaged Navier-Stokes equations with k-epsilon turbulence closure and the compositional fluctuations at each point are given probabilistically in terms of the mixture fraction. The probability density function is derived from transport equations for its first two moments along with an assumption regarding its shape. The resulting equations are solved using a standard line relaxation algorithm. It is found that the predictions of the model are in good agreement with data from an axisymmetric, bluff-body stabilized research combustor, while the major discrepancies are similar to those found in isothermal flow comparisons. The peculiar features of this flow which contribute to the errors are examined. The agreement between the theory and data deteriorates as the central jet velocity is increased which indicates an enhanced role for unsteady effects.

Correa, S. M.↗