Control of nanostructure and activity by alloying and/or segregation
A method for synthesis of PtNi smooth surface core/shell particles or Nano cages and porous nanocages from segregated nanoparticles.
Wang, Rongyue↗
SEARCH · Engineering Papers
Results for “Active particles”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Search for Heavy Neutral Leptons at the MINER$\nu$A detector
Heavy Neutral Leptons (HNL) are particles hypothesised to provide a mass generation mechanism for the active (observed) neutrino species, which are known to have nonzero mass from the definitive observation of neutrino oscillations. HNL are eigenstates of mass of the order $\mathcal{O}(0.1 − 1\,\,\mathrm{GeV}/c^{2})$, which mix into the active flavour eigenstates through the extended leptonic mixing matrix. Apart from neutrino mass, they could provide a natural dark matter candidate and a mechanism for matter-antimatter asymmetry in the early Universe, giving rise to today’s matter-dominated cosmos. Searches for HNL typically attempt to either confirm the existence of HNL through an excess in data that is most compatible with an HNL hypothesis, or by setting limits on the HNL parameter space $\left(M_{N4}, \left|U_{\alpha 4}\right|^{2}\right)$ in the case of statistically insignificant excess. Such searches are intensifying as part of a global research programme at both colliders and accelerator / atmospheric neutrino experiments. One such setting is the MINER$\nu$A experiment, located in the NuMI beamline at Fermilab. MINER$\nu$A has collected a large amount of data over seven years of operation to measure the cross-sections of neutrino-nucleus interactions necessary to drive systematic uncertainties down, in order for neutrino oscillation experiments to achieve sensitivity to CP violation in the neutrino sector. With the high-energy, high-intensity NuMI beam, and with good timing, position, and angular resolution leading to sensitivity to HNL decays, MINER$\nu$A is fertile ground for an HNL search, which is performed in this thesis. Specifically, a novel, experiment-agnostic and general simulation of HNL production and decay is presented and deployed; this simulation has been incorporated in the ubiquitous GENIE neutrino event generator for use with neutrino experiments in the future. The event selection and background characterisation is discussed in detail, including the primary background coming from charged-current coherent and diffractive pion production from neutrino-nucleus interactions, and constraints on the background using control regions from MINER$\nu$A data are derived. Finally, by means of a fake-data study given a background of $\mathcal{O}(500)$ events, the discovery potential and limit-setting capacity of MINER$\nu$A is demonstrated, and ways to improve this capacity are expounded upon.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Sub-10 nm upconversion nanocrystals for long-term single-particle tracking
Lanthanide-doped upconversion nanoparticles are attractive single-molecule imaging probes due to their high photostability and anti-Stokes luminescence. However, achieving both small particle size and strong brightness has remained a major challenge, as reducing size often leads to dimmer emission. Herein, we fabricate a sub-10 nm cascade actively protected upconversion nanoparticles, which shows a 33-fold enhanced upconversion efficiency at the single-particle level compared to larger ~19 nm conventional nanoparticles. Theoretical modeling and time-resolved measurements show that emission loss mainly comes from energy leakage of Er 3+ ions to surface defects. By introducing a NaYbF 4 layer as photon-harvesting and protective intermediate layer, we minimize this energy loss and significantly boost brightness. A monolayer of inert NaLuF 4 can effectively suppress the surface quenching to Yb 3+ . Using these ultra-small bright probes, we successfully tracked single epidermal growth factor receptor molecules on live cells for up to one hour, revealing dynamic switching between different diffusion modes.
Qiu, Xiaochen [Fudan Univ., Shanghai (China); Shen↗
Long-range transported continental aerosol in the eastern North Atlantic: three multiday event regimes influence cloud condensation nuclei
Abstract. The eastern North Atlantic (ENA) is a region dominated by pristine marine environment and subtropical marine boundary layer clouds. Under unperturbed atmospheric conditions, the regional aerosol regime in the ENA varies seasonally due to different seasonal surface-ocean biogenic emissions, removal processes, and meteorological regimes. However, during periods when the marine boundary layer aerosol in the ENA is impacted by particles transported from continental sources, aerosol properties within the marine boundary layer change significantly, affecting the concentration of cloud condensation nuclei (CCN). Here, we investigate the impact of long-range transported continental aerosol on the regional aerosol regime in the ENA using data collected at the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility on Graciosa Island in 2017 during the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) campaign. We develop an algorithm that integrates number concentrations of particles with optical particle dry diameter (Dp) between 100 and 1000 nm, single scattering albedo, and black carbon concentration to identify multiday events (with duration >24 consecutive hours) of long-range continental aerosol transport in the ENA. In 2017, we detected nine multiday events of long-range transported particles that correspond to ∼ 7.5 % of the year. For each event, we perform HYSPLIT 10 d backward trajectories analysis, and we evaluate CALIPSO aerosol products to assess, respectively, the origins and compositions of aerosol particles arriving at the ENA site. Subsequently, we group the events into three categories, (1) mixture of dust and marine aerosols, (2) mixture of marine and polluted continental aerosols from industrialized areas, and (3) biomass burning aerosol from North America and Canada, and we evaluate their influence on aerosol population and cloud condensation nuclei in terms of potential activation fraction and concentrations at supersaturation of 0.1 % and 0.2 %. The arrival of plumes dominated by the mixture of dust and marine aerosol in the ENA in the winter caused significant increases in baseline Ntot. Simultaneously, the baseline particle size modes and CCN potential activation fraction remained almost unvaried, while cloud condensation nuclei concentrations increased proportionally to Ntot. Events dominated by a mixture of marine and polluted continental aerosols in spring, fall, and winter led to a statistically significant increase in baseline Ntot, a shift towards larger particular sizes, a higher CCN potential activation fractions, and cloud condensation nuclei concentrations of >170 % and up to 240 % higher than during baseline regime. Finally, the transported aerosol plumes characterized by elevated concentration of biomass burning aerosol from continental wildfires detected in the summertime did not statistically contribute to increase baseline aerosol particle concentrations in the ENA. However, particle diameters were larger than under baseline conditions, and CCN potential activation fractions were >75 % higher. Consequentially, cloud concentration nuclei concentrations increased by ∼ 115 % during the period affected by the biomass burning events. Our results suggest that, through the year, multiday events of long-range continental aerosol transport periodically affect the ENA and represent a significant source of CCN in the marine boundary layer. Based on our analysis, in 2017, the multiday aerosol plume transport dominated by a mixture of dust and marine aerosol, a mixture of marine and polluted continental aerosols, and biomass burning aerosols caused increases in the NCCN baseline regime of, respectively, 6.6 %, 8 %, and 7.4 % at SS 0.1 % (and, respectively, 6.5 %, 8.2 %, and 7.3 % at SS 0.2 %) in the ENA.
54 ENVIRONMENTAL SCIENCES↗
Multi-campaign ship and aircraft observations of marine cloud condensation nuclei and droplet concentrations
In situ marine cloud droplet number concentrations (CDNCs), cloud condensation nuclei (CCN), and CCN proxies, based on particle sizes and optical properties, are accumulated from seven field campaigns: ACTIVATE; NAAMES; CAMP 2 EX; ORACLES; SOCRATES; MARCUS; and CAPRICORN2. Each campaign involves aircraft measurements, ship-based measurements, or both. Measurements collected over the North and Central Atlantic, Indo-Pacific, and Southern Oceans, represent a range of clean to polluted conditions in various climate regimes. With the extensive range of environmental conditions sampled, this data collection is ideal for testing satellite remote detection methods of CDNC and CCN in marine environments. Remote measurement methods are vital to expanding the available data in these difficult-to-reach regions of the Earth and improving our understanding of aerosol-cloud interactions. The data collection includes particle composition and continental tracers to identify potential contributing CCN sources. Several of these campaigns include High Spectral Resolution Lidar (HSRL) and polarimetric imaging measurements and retrievals that will be the basis for the next generation of space-based remote sensors and, thus, can be utilized as satellite surrogates.
54 ENVIRONMENTAL SCIENCES↗
Multiple Roles of Alkanethiolate‐Ligands in Direct Formation of H 2 O 2 over Pd Nanoparticles
Abstract Coadsorbed organic species including thiolates can promote direct synthesis of hydrogen peroxide from H 2 and O 2 over Pd particles. Here, density functional theory based kinetic modeling, augmented with activity measurements and vibrational spectroscopy are used to provide atomistic understanding of direct H 2 O 2 formation over alkylthiolate(RS) Pd. We find that the RS species are oxidized during reaction conditions yielding RSO 2 as the effective ligand. The RSO 2 ligand shows superior ability for proton transfer to the intermediate surface species OOH, which accelerates the formation of H 2 O 2 . The ligands promote the selectivity also by blocking sites for unselective water formation and by modifying the electronic structure of Pd. The work rationalizes observations of enhanced selectivity of direct H 2 O 2 formation over ligand‐funtionalized Pd nanoparticles and shows that engineering of organic surface modifiers can be used to promote desired hydrogen transfer routes.
Chen, Lin↗
Multiple Roles of Alkanethiolate‐Ligands in Direct Formation of H 2 O 2 over Pd Nanoparticles
Abstract Coadsorbed organic species including thiolates can promote direct synthesis of hydrogen peroxide from H 2 and O 2 over Pd particles. Here, density functional theory based kinetic modeling, augmented with activity measurements and vibrational spectroscopy are used to provide atomistic understanding of direct H 2 O 2 formation over alkylthiolate(RS) Pd. We find that the RS species are oxidized during reaction conditions yielding RSO 2 as the effective ligand. The RSO 2 ligand shows superior ability for proton transfer to the intermediate surface species OOH, which accelerates the formation of H 2 O 2 . The ligands promote the selectivity also by blocking sites for unselective water formation and by modifying the electronic structure of Pd. The work rationalizes observations of enhanced selectivity of direct H 2 O 2 formation over ligand‐funtionalized Pd nanoparticles and shows that engineering of organic surface modifiers can be used to promote desired hydrogen transfer routes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Naturally light Dirac and pseudo-Dirac neutrinos from left-right symmetry
We develop a class of left-right symmetric theories based on the gauge group SU(3) c x SU(2) L x SU(2) R x U(1) with a generalized seesaw mechanism for generating the charged fermion masses. Neutrinos are naturally Dirac particles in this setup with their small masses arising from two-loop quantum corrections. We evaluate these two-loop diagrams exactly and analyze the flavor structure of the lepton sector. We find excellent fits to neutrino oscillation data, independent of the right-handed gauge symmetry breaking scale. We also explore the possibility that neutrinos are pseudo-Dirac particles in this framework, with the tiny mass splittings between active and sterile neutrinos arising from Planck-induced corrections and find possible realizations. These models can be tested in the near future with precision cosmological measurements of ΔN eff in CMB which is predicted to be ≃ 0.14. This class of models allows for a solution to the strong CP problem via parity symmetry without the need for an axion.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage
We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
In-situ synchrotron X-ray investigation of phase evolution in gas atomized powder enabling manufacturing of nanoscale oxide-dispersion strengthened ferritic steels
Here, we present an investigation of Fe-14Cr-3W-0.4Y-0.4Zr-0.18Ti (wt.%) as a reduced-activation oxide-dispersion strengthened (ODS) ferritic steel, an alternative to the “14YWT” structural alloys designed for nuclear energy applications. Gas atomization reaction synthesis (GARS) was used to produce these Zr-modified powders with a non-equilibrium (metastable) phase that enable a heat treatment (delayed) route for producing nanoscale oxide-dispersion strengthening. In situ synchrotron X-ray diffraction and transmission electron microscopy were used to analyze phase evolution as a function of temperature and time, revealing formation of highly dispersed oxide nanoprecipitate phases at temperatures above those needed for powder consolidation and shaping of components. This would allow fabrication of net-shape parts using conventional powder-processing methods prior to thermal activation of a reaction producing nanocrystalline Y-(Ti, Zr)-O particles, with a size of 20 ± 7 nm. These results can inform processing of tubes, cladding, sheets, and plates for use in advanced fission and fusion reactors.
In-situ synchrotron X-ray diffraction↗
Enzymatic degradation of liquid droplets of DNA is modulated near the phase boundary
Significance Biomolecules, such as proteins or nucleic acids, can condense into liquid droplets whose biological or technological function depends on interactions with other solutes. We explore such interactions using a system of self-assembled DNA particles that forms liquid droplets which are degraded by an active solute, a restriction enzyme. We find that enzymes are able to penetrate the droplets when the liquid is poised near the phase boundary, enhancing the degradation rate and, in certain cases, causing internal bubbling. These results point to a complex interplay of phase stability and solute transport in liquid–liquid phase-separating macromolecular systems.
59 BASIC BIOLOGICAL SCIENCES↗
Vapor Deposition Process for Engineering of Dispersed PEMFC ORR Pt/NbO x /C Catalysts
With support from the Department of Energy, and in partnership with Oak Ridge National Laboratory, Exothermics, Northeastern University, the University of Michigan, and IRD Fuel Cells, Ford has led an effort to use physical vapor deposition (PVD) to produce oxygen reduction reaction (ORR) catalysts for proton exchange membrane fuel cells (PEMFCs). Conventional ORR catalysts are made by wet chemical processes, and experience loss of electrochemical surface area and activity over voltage cycling due to Pt dissolution and Pt particle coalescence. Not only was PVD processing researched as a means to reduce solvent waste and enhance reproducibility in catalyst manufacturing, but it was also perceived as a means to deposit preferential phases of niobium oxide onto the catalyst, which would then serve to prevent Pt particle movement and extend PEMFC lifetime.
08 HYDROGEN↗
Fabrication of Advanced Nanocarbon-Metal Composites for Improved Energy Efficiency
We fabricated nanocarbon metal composites (NCMC) of Al alloys with a process called “electrocharging assisted process” (EAP). This method consists of the application of a high current to a mixture of liquid metal and carbon particles. We investigated aluminum alloys (6061 and 1350) and used activated carbon and graphite powder as the source of carbon. The high current induces the formation of carbon chains and ribbons in the liquid metal. Upon solidification of the metal an epitaxial relation between the carbon nanostructures and the metal lattice is produced. The purpose of the project was to find the parameters during the reaction that would give rise to a high density of nanoribbons extending throughout the metal such that the electrical conductivity and the mechanical strength of the composite increased and that the method could be extended to large scale manufacturing. For this purpose, we designed two reactors for the incorporation of nanocarbon ribbons in aluminum metal. The first reactor was designed to have more control of the region with the high current density. However, there were problems with getting good mixing of the carbon in small volumes. A second reactor was designed with a stirrer that allowed for better mixing of the carbon by the introduction of argon gas through the shaft of the stirrer. NCMC were fabricated with a series of parameters to understand the role of current, time of applied current, type and shape of the cathode electrode and stirring speed of the mixture. We analyzed the composites by Raman scattering to gain information on the crystallite size of the nanocarbon, XRD to obtain the crystal structure of the composite, SEM and TEM to characterize the grain size of the aluminum grains and the quality of the crystal structure. We also measured the electrical conductivity and mechanical properties of selected samples. The nanocomposites showed increase in crystallite size of the nanocarbon with a linear dependence of the crystallite size on the duration of the applied current. There is a minimum current density necessary for the crystallite size to increase compared to the ~ 10 nm size of the activated carbon source used in the fabrication. The electrical conductivity of the nanocomposites increased with crystallite size of the nanocarbon and with the concentration of converted carbon. The maximum increase in electrical conductivity was 5.7% above the baseline for samples with ~ 4 wt % nanocarbon with crystallite size larger than 30 nm. These samples presented a hardness ~ 8% higher than the baseline samples with no carbon.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Measuring Nuclear Clusters in the Short-Baseline Near Detector
The Short-Baseline Near Detector (SBND) is the first Liquid Argon Time Projection Chamber (LArTPC) with high enough resolution and large enough neutrino flux to measure the cross-section for production of heavier-than-proton fragments in neutrino interactions. SBND is an 112-ton LArTPC, and lies 110 m downstream from the Booster Neutrino Beam target, where it is collecting more than two million neutrino interactions per year. As a result of both the intranuclear cascade and nuclear de-excitation, neutrino interactions with argon can produce nuclear clusters such as deuterons, tritons, helions and alpha particles, which have so far only been seen as vertex activity or mis-reconstructed as protons. With LArTPC technology's excellent reconstruction capabilities and SBND's unprecedented neutrino statistics, a measurement of these nuclear clusters could distinguish between nuclear models and improve neutrino energy reconstruction. This poster presents the status of simulation and reconstruction of nuclear clusters in SBND.
Beever, Anna L. [Unlisted, US] (ORCID:000900069339↗
The Beam Plasma Interactions Experiment: An Active Experiment Using Pulsed Electron Beams
Not Available
79 ASTRONOMY AND ASTROPHYSICS↗
INSIGHTS INTO MARINE UNICELLULAR CYANOBACTERIAL AND NON-CYANOBACTERIAL DIAZOTROPHS THROUGH SINGLE-CELL ANALYSES
Nutrient availability affects primary productivity, and nitrogen (N) is the limiting nutrient over large regions of the ocean. Biological N fixation (BNF) is the conversion of atmospheric dinitrogen (N2) to bioavailable forms of N (ammonium and amino acids). A select group of Bacteria and Archaea, known as diazotrophs, are the only organisms capable of this conversion. BNF is a critical source of N in nutrient-depleted (oligotrophic) marine waters. As such, BNF studies are a fundamental component for better understanding primary productivity and carbon cycling, as well as parameterizing predictive future global ocean models. Unicellular diazotrophs are widespread in marine systems and, in some cases, important contributors of BNF. This dissertation investigates unicellular diazotrophs at the single-cell level, including: UCYN-A, a cyanobacterial diazotroph that lives in symbiosis with an algal host, non-cyanobacterial diazotrophs (NCDs), which are putative heterotrophs, as well as a specific NCD known as Gamma A, a commonly occurring organism throughout the tropics and subtropics that belongs to the class Gammaproteobacteria. The single-cell investigations used in these studies can provide high-resolution insights that are not possible from community-level analyses of BNF, such as the N2 fixation rate of individual cells and cell morphology. Singlecell nanoscale secondary ion mass spectrometry (nanoSIMS) analyses were used in chapter 2 and 3 to investigate the cell-specific N2 fixation rates of (2) UCYN-A in the viii cold waters of the Bering and Arctic Seas where N2 fixation was not previously believed to be possible, and (3) NCDs in the North Pacific Subtropical Gyre where we demonstrated the first direct evidence of NCD N2 fixation on open ocean particles. Chapter 4 focused on the uncultivated NCD, Gamma A, using geneFISH to visualize single cells in natural seawater samples. We successfully identified Gamma A by developing a fluorescent in situ hybridization (FISH) probe targeting the diazotrophic functional marker gene nifH, revealing Gamma A cells are most often attached to particles. Together these studies provide new insights into the distributions, activities, and physiologies of geographically widespread, unicellular diazotrophs, thus improving our understanding of their roles as sources of fixed N in the surface ocean.
Harding, K.↗
Ammonia Synthesis by a Supported Iron-Lithium Hydride Precatalyst: Silicon Nitride Support Enabled Synthesis and Nitrogen Reservoir Dynamics
Amorphous silicon nitride (Si 3 N 4 ) is an unconventional support for the chemisorption of organometallic complexes and offers potential improvements in active site stability and reactivity through enhanced metal-nitrogen covalency and orbital overlap in bonding interactions with the nitride framework. Here, we show that silicon nitride-supported iron mesityl complexes display divergent reactivity compared to their silica-supported homologues, resisting metallic particle formation under reducing pretreatment conditions (exposure to excess organolithium reagents) and maintaining active iron/lithium speciation under ammonia synthesis conditions that is absent on the oxide support. When the organometallic iron complex on silicon nitride is exposed to excess n-butyllithium, iron remains isolated, catalyzing the conversion of butyllithium to lithium hydride, resulting in a divalent iron site in a polyhydride environment. In contrast, the silica-supported complex is converted to reduced iron clusters without forming persistent isolated hydrides. These structural differences lead to markedly different catalytic behaviors under ammonia synthesis conditions. The Li/Fe/Si 3 N 4 catalyst is highly active (7.5 mol NH 3 /mol Fe/h at 300 °C, 10 bar, or 46 mol NH 3 /mol Fe/h at 400 °C, 10 bar), while both the silica-supported analog and the nonlithiated Si 3 N 4 -supported species are inactive. Notably, this activity is enhanced relative to previously reported iron-lithium hydride composite catalysts (0.43–4.1 mol NH 3 /mol Fe/h at 300 °C, 10 bar) and relative to the industrial benchmark promoted iron catalyst KM1 (3.0 mol NH 3 /mol Fe/h at 400 °C, 10 bar). The catalyst activation and LiH/LiNH x nitrogen reservoir dynamics for Li/Fe/Si 3 N 4 are studied by X-ray Absorption, Mössbauer, and in situ DRIFT spectroscopies and isotopic exchange kinetics.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SILICON CARBIDE THERMOMETRY USING RAMAN SPECTROSCOPY ON IRRADIATED TRISO PARTICLES
Silicon carbide (SiC) passive thermometry has emerged as a promising post-irradiation examination (PIE) technique for estimating irradiation temperature near the end of irradiation. While dilatometry techniques have been traditionally used to analyze prismatic samples after irradiation, Raman spectroscopy has recently been shown to provide comparable results by analyzing Raman-active phonon modes. In this work, Raman spectroscopy has been applied to the SiC layer of cross-sectioned irradiation tristructural isotropic (TRISO) particles from the AGR-5/6/7 experiment to evaluate the feasibility of particle-scale passive thermometry. Two-dimensional Raman mapping was used to measure the position of the SiC longitudinal optical (LO) phonon, which was then converted to an apparent irradiation temperature using a previously established empirical correlation. Particles from AGR-5/6/7 Compacts 2-2-1 and 5-1-3 were selected as their calculated time-averaged, volume-averaged (TAVA) temperatures (828°C and 706°C, respectively) fall within the range of the sensitivity of the experimental approach. The use of SiC thermometry was anticipated to confirm or highlight potential deviations from calculated end-of-life TAVA temperature across compacts. Four particles from Compact 2-2-1 and two particles from Compact 5-1-3 were selected based on 110mAg inventory (either some measurable activity or below the minimum detection limit) which is commonly used as an indicator of in-pile temperature variation of particles within the same compact. Across every particle selected it was determined that the average LO peak position was located around 968 cm-1 to 969 cm-1. Using the previously determined empirical correlation, this corresponds to an irradiation temperature around 950°C to 966°C, which does not align with the reported TAVA temperature values. This discrepancy in apparent irradiation temperatures likely reflects a combination of uncertainties in the calculated particle temperatures and differences in irradiation history between the present specimens and those used to establish the empirical Raman calibration such as neutron flux (damage rate) and SiC microstructure (as fabricated and irradiated).
Vawdrey, Josh [ORNL]↗