Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accelerator experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Characterisation of plasma in a rail gun

The mechanism of plasma and projectile acceleration in a DC rail gun is described from a microscopic point of view through the establishment of the Hall field. The plasma conductivity is shown to be a tensor, indicating that there is a small component of current parallel to the direction of acceleration. The plasma characteristics are evaluated in the experiment of Bauer et. al., as a function of plasma mass through a simple fluid mechanical analysis of the plasma. By equating the energy dissipatated in the plasma with the radiation heat loss, the properties of the plasma are determined.

Ray, P. K.↗

Current driven weak double layers

Double layers in plasmas can be created by different means. For example, a potential difference forms between two plasmas with different temperatures, in a plasma jet flowing along a converging magnetic field, in a quiescent plasma submitted to an external difference of potential, or in a turbulent plasma carrying an electric charge. The first three cases can be current-free, but not necessarily, although the numerical simulations were made under such conditions for the first two points. Apart from the third case, which is mainly of interest for laboratory experiments, these double layers are good candidates for accelerating the auroral electrons to the few kiloelectron volts observed.

Chanteur, Gerard↗

Rate for annihilation of galactic dark matter into two photons

A calculation of the cross section for neutralino-neutralino annihilation into two photons is performed and applied to dark matter in the galactic halo to find the counting rate in a large gamma ray detector such as EGRET (Energetic Gamma Ray Experiment Telescope) or ASTROGAM. Combining constraints from particle accelerators with the requirement that the neutralinos make up the dark matter, it is found that rates of over a few dozen events per year are unlikely. The assumptions that go into these conclusions are listed. Other particle dark matter candidates which could give larger and perhaps observable signals are suggested.

Giudice, Gian F.↗

Results from the Magellan mission to Venus

Magellan's radar-mapping mission to Venus has thus far accomplished the mapping of nearly 95 percent of the planet's surface; the 100-m resolution of these data facilitate studies of Venus' geological evolution. Widespread evidence of horizontal compression and extension at many scales is noted. Crustal deformation appears to be distributed across most of the surface. The density distribution of the interior of Venus will be explored in an upcomimg gravity experiment, in which accurate tracking of spacecraft orbital accelerations is used to identify gravity anomalies.

Plaut, Jeffrey J.↗

Rarefied-flow shuttle aerodynamics flight model

A model of the Shuttle Orbiter rarefied-flow aerodynamic force coefficients has been derived from the ratio of flight acceleration measurements. The in-situ, low frequency, low level acceleration measurements are made during atmospheric reentry. The experiment equipment designed and used for this task is the High Resolution Accelerometer Package (HiRAP), one of the sensor packages in the Orbiter Experiments Program. To date, 12 HiRAP reentry mission data sets spanning a period of about 10 years have been processed. The HiRAP derived aerodynamics model is described in detail. The model includes normal and axial hypersonic continuum coefficient equations as functions of angle-of-attack, body flap deflection, and elevon deflection. Normal and axial free molecule flow coefficient equations as a function of angle-of-attack are also presented, along with flight derived rarefied-flow transition bridging formulas. Comparisons are made between the aerodynamics model and data from the Orbiter Operational Aerodynamic Design Data Book, and applicable computer simulations and wind-tunnel data.

Blanchard, Robert C.↗

AMPAS - A new active experiment mission

A new concept for an active experiments mission is presented: The Active Magnetospheric Particle Acceleration Satellite (AMPAS). It is proposed to fly a dual-payload tethered satellite to study three important areas of magnetopsheric physics: (1) electric and magnetic field structures of the Earth's magnetosphere, (2) electron beam-plasma interactions, and (3) far ultraviolet (FUV) signatures of energetic electron precipitation. The tethered system is to be flown in a gravity-gradient stabilized configuration with a 70 deg circular orbit at altitudes in the range 300-800 km. The upper payload will carry two electron beam accelerators (1-10 keV, 1 A) and a plasma contractor to electrically neutralize the payload, while the lower will carry a complement of optical imaging and plasma diagonstics instrumentation. Upward directed beams are injected to 'sound' electric and magnetic field structures, including parallel electric fields in the auroral region, while simultaneous optical instruments aimed downwards measure characteristics of reflected beam pulses precipitating into the upper atmosphere below the satellite. Downward directed beams, and simultaneous plasma wave, particle and optical measurements, are used for the investigation of beam-plasma interactions and electron precipitation studies. The payloads are to be connected by a 1-6 km long tether to be deployed in stages. The configuration of the beam source and the plasma and optical diagnostics on separate, tethered payloads allows the diagnostics to be performed outside of the disturbed region around the source payload, and plasma wave and particle observations of beam-plasma interactions to be performed at well-defined locations relative to the source.

Neubert, T.↗

Self-Consistent Implementation of a Zero-Equation Transport Model Into a Predictive Model for a Hall Effect Thruster

The performance of an axisymmetric multi-fluid Hall thruster code that incorporates a self-consistent, data-driven closure model for the anomalous electron transport is investigated. Five different operating conditions of the H9 magnetically shielded Hall thruster are simulated with the Jet Propulsion Laboratory’s Hall2De. In order to capture the inherent uncertainty associated with the closure model, O(100) simulations are run for each condition, each of using a coefficient set sampled randomly from a probability distribution. The results of these simulations provide probabilistic predictions of thruster performance quantities including thrust, and discharge current, as well as several component efficiencies and centerline plasma properties. The model is found to yield converged solutions at all conditions, with large 10 kHzrange oscillations and performance trends with voltage and flow rate similar to experiment. The model under-predicts the thrust by 15-25% and over-predicts the discharge current by 20% on average compared to experiments at the same discharge voltage and mass flow rate. This performance discrepancy is due to lower beam utilization, mass utilization, and divergence efficiency than experiment, resulting from high Hall parameters in the acceleration region, which lead to a protracted ion acceleration region. The physical processes underlying this result are discussed in the context of future data-driven modeling efforts.

Jorns, Benjamin A.↗

Review of European microgravity measurements

AA In a French/Russion cooperation, CNES developed a microgravity detection system for analyzing the Mir space station micro-g-environment for the first time. European efforts to characterize the microgravity (1/9) environment within a space laboratory began in the late seventies with the design of the First Spacelab Mission SL-1. Its Material Science Double Rack was the first payload element to carry its own tri-axial acceleration package. Even though incapable for any frequency analysis, the data provided a wealth of novel information for optimal experiment and hardware design and operations for missions to come. Theoretical investigations under ESA contract demonstrated the significance of the detailed knowledge of micro-g data for a thorough experiment analysis. They especially revealed the high sensitivity of numerous phenomena to low frequency acceleration. Accordingly, the payloads of the Spacelab missions D-1 and D-2 were furnished with state-of-the-art detection systems to ensure frequency analysis between 0.1 and 100 Hz. The Microgravity Measurement Assembly (MMA) of D-2 was a centralized system comprising fixed installed as well as mobile tri-axial packages showing real-time data processing and transmission to ground. ESA's free flyer EURECA carried a system for continuous measurement over the entire mission. All EURECA subsystems and experimental facilities had to meet tough requirements defining the upper acceleration limits. In a French/Russion cooperation, CNES developed a mi crogravity detection system for analyzing the Mir space station micro-g-environment for the first time. An approach to get access to low frequency acceleration between 0 and 0.02 Hz will be realized by QSAM (Quasi-steady Acceleration Measurement) on IML-2, complementary to the NASA system Spacelab Acceleration Measurement System SAMS. A second flight of QSAM is planned for the Russian free flyer FOTON.

Hamacher, Hans↗

Enhancing Systems Engineering Education Through Case Study Writing

Developing and refining methods for teaching systems engineering is part of Systems Engineering grand challenges and agenda for research in the SE research community. Retention of systems engineering knowledge is a growing concern in the United States as the baby boom generation continues to retire and the faster pace of technology development does not allow for younger generations to gain experiential knowledge through years of practice. Government agencies, including the National Aeronautics and Space Administration (NASA), develop their own curricula and SE leadership development programs to "grow their own" systems engineers. Marshall Space Flight Center (MSFC) conducts its own Center-focused Marshall Systems Engineering Leadership Development Program (MSELDP), a competitive program consisting of coursework, a guest lecture series, and a rotational assignment into an unfamiliar organization engaged in systems engineering. Independently, MSFC developed two courses to address knowledge retention and sharing concerns: Real World Marshall Mission Success course and its Case Study Writers Workshop and Writers Experience. Teaching case study writing and leading students through a hands-on experience at writing a case study on an SE topic can enhance SE training and has the potential to accelerate the transfer of experiential knowledge. This paper is an overview of the pilot experiences with teaching case study writing, its application in case study-based learning, and identifies potential areas of research and application for case study writing in systems engineering education.

Stevens, Jennifer Stenger↗

Simulation of Combustion Systems with Realistic g-Jitter

A number of facilities are available for microgravity combustion experiments: aircraft, drop tower, sounding rocket, space shuttle and, in the future, the international space station (ISS). Acceleration disturbances or g-jitter about the background level of reduced gravity exist in all the microgravity facilities. While g-jitter is routinely measured, a quantitative comparison of the quality of g-jitter among the different microgravity facilities has not been compiled. Low frequency g-jitter (< 1 Hz) has been repeatedly observed to disturb a number of combustion systems. Guidelines regarding tolerable levels of acceleration disturbances for a given combustion system have been developed for use in the design of ISS experiments. The validity of these guidelines, however, remains unknown. In this project, recently funded by NASA, a transient, fully three-dimensional simulation code will be developed to simulate the effects of realistic g-jitter on a number of combustion systems. Acceleration disturbances of realistic orientation, magnitude and time dependence will be included in the simulation. Since this is a newly funded project with code development just under-way no simulation results will be presented. Instead, first a short review of the relevant background concerning g-jitter will be given followed by a section on the proposed technical approach.

Mell, William E.↗

Ocular torsion on earth and in weightlessness

Otolith function is studied by means of measurements of ocular torsion under various acceleration environments on earth and in weightlessness. Photographic measurements of ocular torsion as indicated by the rotation of landmarks on the iris with respect to head-fixed fiducial marks were obtained in subjects undergoing horizontal linear acceleration in a ground-based version of the space sled, lateral acceleration from weightlessness during pullout from the free-fall portion of parabolic flight, and optokinetic stimulation about the roll axis in the supine position in the laboratory and during weightlessness. The responses of ocular torsion to horizontal acceleration are in agreement with a simple low-order linear system with a dominant time constant of 0.33 sec, with a transfer function fit by a model with a pure delay of 0 to 400 msec and a first-order lag. In the pullout experiment, torsion was not observed in response to the onset of acceleration in the right-ear-down position, although it was present in response to the lateral stimulus. Results of the roll vection experiments indicate the independence of ocular torsion and visually induced tilt. In addition, an automatic video system using a soft contact lens target is presented which has been developed for ocular torsion measurements.

Young, L. R.↗

Vibration isolation technology: An executive summary of systems development and demonstration

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Grodsinsky, Carlos M.↗

Vibration isolation technology - An executive summary of systems development and demonstration

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Grodsinsky, C. M.↗

Application of a First-Principles Anomalous Transport Model for Electrons to Multiple Hall Thrusters and Operating Conditions

We have developed a physics-based model based on a pseudo-particle description of the electron cyclotron drift instability. A key improvement of the model with respect to previous work is that linear theory is not applied in the event of wave saturation and deviations of electrons or ions from a Maxwellian distribution function. In the acceleration region, the anomalous collision frequency is computed as the minimum value necessary to prevent the electron drift velocity from exceeding the thermal velocity. A functional based on the electron equilibration time is defined to control the transition from high to low resistivity regions. The model was previously applied to a single Hall thruster at its nominal operating condition, showing promising results that captured accurately the location of the thruster’s acceleration region. In this paper, we extend the use of this firstprinciples models to two additional thrusters, also considering multiple operating conditions for each of them. Numerical results are compared to experimental measurements obtained with non-invasive laser induced fluorescence. In general, the agreement between experiments and simulations is good. The model is able to predict the location of the acceleration region for all cases. We observe however that fine details, such as changes in the plasma potential gradient within the acceleration regions, are not captured. The model is also insensitive to changes in the magnetic field strength while experiments show that small shifts in location (of less than 5% of the acceleration channel length) occur. We plan to address the weaknesses of our method with the help of physical insight gained from kinetic simulations of the acceleration region.

Chaplin, Vernon H.↗

Experimental evaluation of the Battelle accelerated test design for the solar array at Mead, Nebraska

A previously developed test design for accelerated aging of photovoltaic modules was experimentally evaluated. The studies included a review of relevant field experience, environmental chamber cycling of full size modules, and electrical and physical evaluation of the effects of accelerated aging during and after the tests. The test results indicated that thermally induced fatigue of the interconnects was the primary mode of module failure as measured by normalized power output. No chemical change in the silicone encapsulant was detectable after 360 test cycles.

Frickland, P. O.↗

Summary Report of Mission Acceleration Measurements for STS-79. Launched 16 Sep. 1996

The Space Acceleration Measurement System (SAMS) collected acceleration data in support of the Mechanics of Granular Materials experiment during the STS-79 Mir docking mission, September 1996. STS-79 was the first opportunity to record SAMS data on an Orbiter while it was docked to Mir. Crew exercise activities in the Atlantis middeck and the Mir base module are apparent in the data. The acceleration signals related to the Enhanced Orbiter Refrigerator Freezer had different characteristics when comparing the data recorded on Atlantis on STS-79 with the data recorded on Mir during STS-74. This is probably due, at least in part, to different transmission paths and SAMS sensor head mounting mechanisms. Data collected on Atlantis during the STS-79 docking indicate that accelerations due to vehicle and solar array structural modes from Mir transfer to Atlantis and that the structural modes of the Atlantis-Mir complex are different from those of either vehicle independently. A 0.18 Hz component of the SAMS data, present while the two vehicles were docked, was probably caused by the Mir solar arrays. Compared to Atlantis structural modes of about 3.9 and 4.9 Hz, the Atlantis-Mir complex has structural components of about 4.5 and 5.1 Hz. After docking, apparent structural modes appeared in the data at about 0.8 and 1.8 Hz. The appearance, disappearance, and change in the structural modes during the docking and undocking phases of the joint Atlantis-Mir operations indicates that the structural modes of the two spacecraft have an effect on the microgravity environment of each other. The transfer of structural and equipment related accelerations between vehicles is something that should be considered in the International Space Station era.

Rogers, Melissa J. B.↗

The vibro-acoustic mapping of low gravity trajectories on a Learjet aircraft

The NASA LeRC Learjet aircraft is used to fly parabolic trajectories for carrying out in-flight microgravity experiments. To derive full benefit from data obtained in such experiments, it is not only required to understand the low- to moderate-frequency accelerations present but also necessary to characterize the broadband aircraft vibro-acoustic environment. A vibro-acoustic measurement program was conducted during a series of low-gravity trajectories flown on the Learjet. The fuselage and an experiment rack were instrumented with 13 channels of accelerometers and three channels of pressure transducers. The locations of these sensors were determined in order to build a time history of the dynamics involved in the flight of such a parabolic trajectory and thus determine the typical rigid-body and vibro-acoustic loading a payload would experience. The instrumentation, data acquisition sequence, and experimental results showing residual accelerations and high-frequency dynamics are presented. As suspected, the measurements revealed that the aircraft environment cannot simply be described in terms of the static level low-gravity g-vector obtained, but that it also must account for both rigid-body and high-frequency vibro-acoustic dynamics.

Grodsinsky, C. M.↗

Wind tunnel apparatus for translational oscillation experiments

A full-model translational oscillation apparatus has been developed for the wind-tunnel determination, in a wide speed range, of all three moment derivatives due to translational acceleration. The apparatus can be employed, in principle, for both vertical and horizontal oscillation experiments and can be used, therefore, to obtain moment derivatives due to alpha or beta, respectively. This information can be obtained directly if the model can be oscillated in the translational mode only, or indirectly - by utilizing some complementary information from angular oscillation experiments - if the model is allowed to also perform a small angular oscillation. The apparatus employs modern, fully digital instrumentation and an extensive use of auto and cross correlation techniques is made in the data reduction procedure

Orlik-Ruckemann, K. J.↗