Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Arsenic antisite and oxygen incorporation trends in GaAs grown by water-mediated close-spaced vapor transport

Close-spaced vapor transport (CSVT) provides a plausible path to lower the costs of GaAs deposition as it uses only solid precursors and provides precursor utilization in principle approaching 100%. However, the use of H 2 O as a transport agent causes O to be incorporated in CSVT films, and O has been associated with a number of electrically active defect centers in GaAs, which decrease minority carrier lifetimes. In this paper, using deep-level transient spectroscopy, we study the effect of H 2 O concentration and substrate temperature on electron trap concentrations in n-type GaAs. We find that the most-prominent O-related center (ELO) typically has a much higher concentration than the center usually associated with As antisites (EL2), but that overall defect concentrations can be as low as those in films deposited by common vapor phase techniques. The trends with increasing H 2 O concentration suggest that ELO is most likely a defect complex with two As antisites. We also consider the optimal conditions for achieving high growth rates and low defect concentrations using CSVT. Finally, the results of this study have implications for the future CSVT growth using halide transport agents, where the ELO defect would be eliminated but EL2 might have a higher concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High p-type doping, mobility, and photocarrier lifetime in arsenic-doped CdTe single crystals

Here, Group-V element doping is promising for simultaneously maximizing the hole concentration and minority carrier lifetime in CdTe for thin film solar cells, but there are roadblocks concerning point defects including the possibility of self-compensation by AX metastability. Herein, we report on doping, lifetime, and mobility of CdTe single crystals doped with As between 10 16 and 10 20 cm –3 grown from the Cd solvent by the travelling heater method. Evidence consistent with AX instability as a major contributor to compensation in samples doped below 10 17 cm –3 is presented, while for higher-doped samples, precipitation of a second phase on planar structural defects is also observed and may explain spatial variation in properties such as lifetime. Rapid cooling after crystal growth increases doping efficiency and mobility for times up to 20–30 days at room temperature with the highest efficiencies observed close to 45% and a hole mobility of 70 cm 2 /Vs at room temperature. A doping limit in the low 10 17 /cm 3 range is observed for samples quenched at 200–300 °C/h. Bulk minority carrier lifetimes exceeding 20 ns are observed for samples doped near 10 16 cm –3 relaxed in the dark and for unintentionally doped samples, while a lifetime of nearly 5 ns is observed for 10 18 cm –3 As doping. These results help us to establish limits on properties expected for group-V doped CdTe polycrystalline thin films for use in photovoltaics.

14 SOLAR ENERGY↗

Arsenic activation and compensation in single crystal CdTe bilayers

In state-of-the art polycrystalline CdTe photovoltaics, group-V dopant activation is about 2%. Low activation can create electronic defects and lead to recombination and band tail losses. To develop methods to overcome this limitation, dopant activation was systematically investigated using molecular beam epitaxy (MBE) grown single crystal bilayers of As-doped CdTe on undoped CdTe. Results suggest multiple paths for improved As-activation in polycrystalline CdTe-based devices. It was found that the carrier concentration in this MBE material saturated at ∼3 × 1016 cm−3, with high levels (>50%) of As-activation possible. High activation could be achieved with a post-growth activation temperature of ∼450 °C, when the initial doping level was below the saturation level. However, at typical polycrystalline As incorporation levels (>5 × 1016 cm−3), the excess As is inactive or compensating, requiring elevated temperatures (500–600 °C) to achieve high activation. Oxygen in the annealing ambient was detrimental, while the effect of CdCl2 in the ambient is more case-dependent. A 575 °C activation anneal was combined with a 450 °C CdCl2 treatment to better understand the implications for polycrystalline CdTe. Interestingly, on highly doped samples, processes ending with a high temperature step displayed high activation, while those ending at 450 °C significantly reduced the carrier concentration (with or without CdCl2 in the ambient). Low activation can be restored with another high temperature anneal, allowing reproducible toggling between high and low activation based on the final temperature. Photoluminescence revealed the presence of donor–acceptor pairs in the low activation state that appear to be associated with a compensating defect.

14 SOLAR ENERGY↗

Application of the bounds-analysis approach to arsenic and gallium antisite defects in gallium arsenide

The As antisite in GaAs (AsGa) has been the subject of numerous experimental and theoretical studies. Recent density-functional-theory (DFT) studies report results in good agreement with experimental data for the +2, +1, and 0 charge states of the stable EL2 structure, the 0 charge state of the metastable EL2* structure, and the activation energy to transform from EL2* to EL2 in the 0 charge state. However, these studies did not report results for EL2* in the -1 charge state. In this paper, we report new DFT results for the +2, +1, 0, and -1 charge states of AsGa, obtained using a semilocal exchange-correlation functional and interpreted using a bounds-analysis approach. In good agreement with experimental data, we find a -1/0 EL2* level 0.06 eV below the conduction-band edge and an activation energy of 0.05 eV to transform from EL2* to EL2 in the -1 charge state. While the Ga antisite in GaAs (GaAs) has not been studied as extensively as AsGa, experimental studies report three charge states (-2, -1, 0) and two levels (-2/-1, -1/0) close to the valence-band edge. Recent DFT studies report the same charge states, but the levels are found to be well-separated from the valence-band edge. To resolve this disagreement, we performed new DFT calculations for GaAs and interpreted them using a bounds analysis. The analysis identified the -1 and 0 charge states as hole states weakly bound to a highly-localized -2 charge state. Moreover, the -2/-1, -1/0 levels were found to be near the valence-band edge, in good agreement with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stabilization of s -wave superconductivity through arsenic p -orbital hybridization in electron-doped BaFe 2 As 2

In this paper, using random-phase approximation spin-fluctuation theory, we study the influence of the hybridization between iron $d$ orbitals and pnictide $p$ orbitals on the superconducting pairing state in iron-based superconductors. The calculations are performed for a 16-orbital Hubbard-Hund tight-binding model of ${\mathrm{BaFe}}_{2}{\mathrm{As}}_{2}$ that includes the As-$p$ orbital degrees of freedom in addition to the Fe-$d$ orbitals and compared to calculations for a 10-orbital Fe-$d$ only model. In both models we find a leading ${s}^{±{}}$ pairing state and a subleading ${d}_{{x}^{2}{-}{y}^{2}}$-wave state in the parent compound. Upon doping, we find that the ${s}^{±{}}$ state remains the leading state in the 16-orbital model up to a doping level of 0.475 electrons per unit cell, at which the hole Fermi-surface pockets at the zone center start to disappear. This is in contrast to the 10-orbital model, where the $d$-wave state becomes the leading state at a doping of less than 0.2 electrons. This improved stability of ${s}^{±{}}$ pairing is found to arise from a decrease of ${d}_{xy}$ orbital weight on the electron pockets due to hybridization with the As-$p$ orbitals and the resulting reduction of near $({\pi},{\pi})$ spin-fluctuation scattering which favors the competing $d$-wave state. Finally, these results show that the orbital dependent hybridization of Fermi-surface Bloch states with the usually neglected $p$-orbital states is an important ingredient in an improved itinerant pairing theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement and modeling of proton-induced reactions on arsenic from 35 to 200 MeV

72 As is a promising positron emitter for diagnostic imaging that can be employed locally using a 72 Se generator. However, current reaction pathways to 72 Se have insufficient nuclear data for efficient production using regional 100–200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the 72 Se/ 72 As positron emission tomography (PET) generator system via 75 As (p, x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for 75 As ( p , 4 n ) 72 Se starting from threshold. Additional focus was given to report the first measurements of 75 As (p, x) 68 Ge and bolster an already robust production capability for the highly valuable 68 Ge/ 68 Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from 75 As, nat Cu , and nat Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, COH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the talys code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and preequilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power. This paper merges experimental work and evaluation techniques for high-energy charged-particle isotope production in an extension to an earlier study of this kind.

43 PARTICLE ACCELERATORS↗

Doping Properties of Cadmium-Rich Arsenic-Doped CdTe for Application of Single Crystal Solar Cell

We report on properties of As doped CdTe single crystals grown from Cd solvent by the travelling heater method.The activation energy of 70 meV derived from temperature-dependent Hall effect are consistent with As Te as the dominant acceptor. Bulk minority carrier lifetimes exceeding 20 ns are observed. We observe persistent photoconductivity, a hallmark of light-induced metastable configuration changes consistent with AX behavior. Cd-rich As-doepd CdTe single crystal was used as absorbing layer in solar cell, and this device can be performed with open-circuit voltage of 900 mV. next.

14 SOLAR ENERGY↗

Nanometer-Scale Imaging of Inhomogeneous Active Charge Carriers in Arsenic-Doped CdTe Thin Films

We report nanometer-scale imaging of active carrier distribution of As-doped CdTe films by scanning capacitance microscopy (SCM). We developed SCM sample preparation for CdTe by ion-milling followed by thermal processing. The nanometer-resolution carrier delineation for CdTe was validated by imaging on a CdTe cross-section sample made by a molecular beam epitaxy layer stack with As-doping concentrations of 10^15 ~10^18 /cm 3 . We found that the carrier distribution in As-doped films was significantly nonuniform, with inhomogeneity ranging from sub-um to a few um and concentration variation of one order of magnitude (low 10^16 to low 10^17 /cm 3 ). This nonuniformity is distributed randomly, independent of grain structure and grain boundary (GB). We used Kelvin probe force microscopy (KPFM) and cathodoluminescence (CL) to further map the surface potential and radiative illumination on the same area as the SCM image. Higher potential and lower CL intensity were found on GBs but not on SCM contrast, illustrating positive GB charging and GB recombination but not GB-distinguished doping. The overall KPFM potential image is in rough agreement with the SCM carrier distribution, in terms of Fermi-level position relative to the bandgap edge - thus resulting in the band-edge potential fluctuation. Nonuniform carrier concentration, potential fluctuation, and defect recombination can all together cause the Voc deficit of the As-doped CdTe device.

14 SOLAR ENERGY↗

Arsenic Doping of Polycrystalline CdSeTe Devices for Microsecond Life-times with High Carrier Concentrations

We report seminal advances in fabrication and understanding of group V (As) doped thin-film polycrystalline CdTe-based solar cells. The devices are fabricated using a novel approach, by sublimating layers of CdSeTe and CdSeTe:As. This new method allowed us to achieve minority carrier lifetime of over 1 μs, carrier concentration of more than 5×l0 15 cc -1 and external radiative efficiency of over 2 % in a device configuration. We find an increase in open-circuit voltage when comparing As-doped, Cu-doped and undoped devices. The choice of CdSeTe instead of a CdTe-only absorber has been explained using first-principle density functional theory model. A SCAPS device model is used to analyze the potential causes for lower open-circuit voltage.

Munshi, Amit H.↗

Gallium arsenide (GaAs) (001) after sublimation of arsenic (As) thin-film cap, by XPS

Survey and high energy resolution spectra are reported for MBE grown GaAs (001) that had been capped with As. The As cap was removed by heating in situ prior to analysis. The current data expands upon the spectral regions previously reported in Surface Science Spectra. High energy resolution spectral features reported include: 2p, 3s, 3p, 3d, and L3M45M45 peaks for As; 2p, 3s, 3p, 3d, and L3M45M45 peaks for Ga; and the valance band region.

As-capped GaAs↗